A new model of the gel time measurement device has arrived! It is now possible to measure gel time while keeping materials like glass fiber prepreg and carbon fiber prepreg in sheet form.

It has become possible to measure gel time while the sheets are in the form of glass fiber prepreg, carbon fiber prepreg, and so on.

Until now, it has been difficult to measure ultra-thin prepreg sheets and carbon fiber prepreg sheets, but it is now possible to measure gel time while keeping them in sheet form. Measurement of liquids and powders is also possible. - Direct measurement of sheet materials eliminates the need for powdering PCB prepreg. Direct measurement of PCB prepreg, carbon prepreg, etc. is possible. Measurement of RCC (resin-coated copper foil) is also possible. - Measurement from thin to thick materials with a single sheet. Supports from 10μm ultra-thin prepreg to thick non-woven fabrics. - Measurement of powder and liquid samples that were difficult with the stirring torque method. Broad compatibility with samples containing high-filled fillers, anaerobic samples, gel-like samples, etc. - Visualization of curing behavior through graphs. Calculates and graphs viscosity, phase difference, shear modulus, etc., from the measured stress. - Measurement of the viscoelasticity of fluids. Rheological measurement of non-Newtonian fluids such as samples that do not cure. - You can check stress, viscosity, and phase data. Download the catalog here▼ https://www.matsuo-sangyo.co.jp/catalogs/ For product details, click here▼ https://www.matsuo-sangyo.co.jp/products/gel-time-tester/

• others

Automatic measurement of gel time for thermosetting resins! Curing behavior of the resin can also be confirmed. *Demo available / Online demo currently being conducted.

Manual measurements often vary in methods and criteria depending on the measurer, leading to significant measurement errors. "Madoka" can obtain high-precision and stable data regardless of the measurer's skill. 【Measurement of Various Resins Possible】 Epoxy, silicone, urethane, PVC, unsaturated polyester, phenol, prepreg, EMC, encapsulants, sealants, adhesives, inks, etc. 【For Those Facing Such Issues】 ◆ Want to eliminate "ambiguous" judgment criteria based on human perception ◇ Want to unify measurement standards between factories and streamline quality control operations ◆ Want to manage measurement result databases and perform data analysis comprehensively ◇ Want to automatically output measurement data to a server 【Features】 ■ Heating plate temperature rise: Measurement starts just 5 minutes after power on ■ Settings possible from room temperature to 300°C high-temperature range ■ Measurement results are graphed as torque curves to confirm curing behavior Download the catalog here▼ https://www.matsuo-sangyo.co.jp/catalogs/ For product details, click here▼ https://www.matsuo-sangyo.co.jp/products/madoka/

• others

It is possible to measure the thermal conductivity, thermal resistance, and interfacial thermal resistance of TIMs in thin films of less than 50μm in conditions close to actual products.

The measurement samples (gel-like liquids, sheets, solids) are measured between two metal test heads with known thermal conductivity (aluminum or copper) in the shape of a cylinder or rectangular prism. The temperature gradient ΔT and heat flow Q in the sample are measured, and the effective thermal resistance Rtheff is determined. By changing the thickness of the sample while applying pressure and repeating the measurements, the thermal conductivity (W/m·K), thermal resistivity (mm²·K/W), and interfacial thermal resistivity (mm²·K/W) of the sample can be calculated using the formulas and graphs below. TIMA5 is a groundbreaking device that can control the sample thickness (gap), pressure, or sample temperature for measurements. Download the catalog here▼ https://www.matsuo-sangyo.co.jp/catalogs/ For product details, click here▼ https://www.matsuo-sangyo.co.jp/products/thermal-interface-material-analyzer/

• Other analytical equipment

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.