篠原電機 List of Products and Services

【Features】 【Compact】 Achieves a reduction in overall length compared to previous models, making it suitable for smaller panels. 【Voltage Resistance】 Has a voltage resistance performance of AC 1500V/min, suitable for use inside panels. 【Energy Saving】 Consumes about half the power compared to conventional fluorescent lights. 【Low Heat Generation】 Does not get as hot as fluorescent lights, ensuring safety. 【Insect Repellent】 Emits very little ultraviolet light, preventing pests from being attracted to the panel and its surroundings, thus blocking their intrusion. 【Impact Resistance】 Completely free of glass, making it safe from vibrations during transport and shocks during installation. *For more details, please refer to the catalog or feel free to contact us.

• Substation equipment

【Features】 【Compatibility】Suitable for switching from 10W/20W fluorescent lamps with a mounting pitch of 280mm/538mm. 【Lightweight】Lightweight due to the absence of metal and glass, ensuring safety against transport vibrations and installation shocks. 【Compact】Compact and simple design allows for space-saving within the panel. 【Voltage Resistance】Has a voltage resistance performance of AC2000V/min, suitable for use within panels. 【Energy Saving】Approximately half the power consumption compared to conventional fluorescent lamps. 【ECO】A clean lighting solution that does not use mercury. 【Low Heat Generation】Does not get as hot as fluorescent lamps, ensuring safety. 【Insect Repellent】Emits very little ultraviolet light, preventing pests from being attracted to the panel and its surroundings. *For more details, please refer to the catalog or feel free to contact us.

• Substation equipment

【Features】 【Long Lifespan】Approximately five times longer lifespan compared to conventional fluorescent lights. 【Energy Saving】About half the power consumption compared to traditional fluorescent lights. 【ECO】A clean lighting solution that does not use mercury. 【Low Heat Generation】Does not get as hot as fluorescent lights, ensuring safety. 【Insect Repellent】Emits very little ultraviolet light, preventing pests from being attracted to the panel and blocking their entry. 【Impact Resistance】Completely free of glass, making it safe from vibrations during transport and impacts during installation. 【Compact】Small and simple design, easy to install in panels, and lightweight. 【Brighter】Achieves approximately 1.5 times the brightness of fluorescent lights (FL10W). (CLED-1004) 【Long Size】Long size equivalent to a 20W straight fluorescent light, illuminating the panel even more brightly. (CLED-1009) *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Fluorescent Light Type

【Features】 - The LED device installed inside is made by Osram, known for its high reliability. - This panel LED lighting is lightweight, easy to handle, and offers excellent cost performance. *For more details, please refer to the materials. Feel free to contact us as well.*

• Fluorescent Light Type

- Powerful magnet - Stepless 90° twist and swivel function - Maximum brightness of 950 lumens - Equipped with red, green, and white LEDs - Uses high-performance LEDs from CREE Inc.

• Other commercial buildings and service facilities

【Features】 - Achieves an unprecedented fit and comfortable wear with adjustable nose bridge height, angle, and tension on the temples. - Available in three frame sizes (narrow, standard, wide). *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• others

Detects over 30 types of gases Easy sensor replacement with calibrated sensors Equipped with event log function Pump system allows gas suction from a distance *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

Freeze powder is a 21st-century hygiene material that combines water-absorbent resin and sodium dichloroisocyanurate using a unique technology, offering high safety while disinfecting and deodorizing vomit and excrement in just a few seconds. It significantly reduces the hassle of handling vomit and excrement and mitigates the risk of norovirus. By providing it as a kit, it is also extremely effective in reducing the risk of infection for workers. 【Set Contents】 100g of solidifying agent, disposable mask, disposable polyethylene gloves, plastic bag, paper towels, disposable dustpan, instruction manual ★ Sample gift of the emergency vomit treatment kit! If you are interested, please apply through the inquiry form. *For more details, please download the PDF materials or feel free to contact us.

• cleaning

The Rig Dog impact-resistant protective gloves have enhanced grip, cut resistance, and impact resistance to ensure smooth operations even in slippery situations caused by oil, sludge, or water. We offer four products that excel in oil resistance, thermal insulation, mud grip, and waterproofing. In particular, the Rig Dog Xtreme has won various design awards, including the Good Design Award 2018, making it an exceptionally excellent product that combines functionality with design. 【Features】 ■ Cut resistance level F ■ Abrasion resistance level 4 ■ Excellent oil grip, dry grip, and wet grip ■ Rapid sweat absorption ■ Strong impact resistance at the fingertips ■ Machine washable *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables
• others

It is possible to calibrate the monitor with just one cradle, and it can also be configured into a powerful system that combines 10 monitors and 5 different gases based on the controller. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments
• others

The IntelliDox system, which integrates a smart docking module and Fleet Manager 2 software, enables automatic management of compatible detectors, improving productivity, reliability, and efficiency. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments
• others

The wireless transmission-compatible MicroRAE can transfer various data to each user's smartphone via Bluetooth using a dedicated app. With simple operation, it can simultaneously detect four types of gases (hydrogen sulfide, carbon monoxide, oxygen, and combustible gases). *For more details, please refer to the catalog or feel free to contact us.

• Environmental Survey
• Other analytical equipment

- Up to 5 types of sensors can be equipped from 4 types of fixed sensors and 10 types of selectable sensors. - Wireless functionality can be equipped, allowing for real-time monitoring of workers and hazardous situations on site. - Large 8.1 cm dot matrix LCD screen. - Quick bump tests and calibration with the automatic inspection and calibration device IntelliDox. *For more details, please refer to the catalog or feel free to contact us.

• Environmental Survey
• Other analytical equipment

Users can operate the screen and make settings using a magnetic key switch without opening the detector. This allows for independent operation without stopping the system, reducing the time and cost of regular maintenance. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments
• others

Freeze powder is a 21st-century hygiene material that is a unique blend of water-absorbing resin and sodium dichloroisocyanurate, offering high safety while disinfecting and deodorizing vomit and excrement in just a few seconds. It significantly reduces the labor involved in handling vomit and excrement, thereby mitigating the risk of norovirus. It is also extremely effective in reducing the risk of infection for workers.

• Other store equipment and supplies
• Nursing care products
• Building Cleaning Equipment

As a stepping platform for cleaning workers to get into vehicles: - Lightweight aluminum material is used for easy portability. - The width of the step has been lowered for female staff, making it easier to climb. - A handle has been added to the step area to prevent slipping.

• Other commercial buildings and service facilities
• others

During the waste extraction operation, a sensor detects when the extraction hose has come loose from under the cleaning platform while the vehicle is connected, and a light alerts the operator. The light remains on during waste extraction and turns off when the hose is returned. Additionally, the hose attachment can be slid on from above, reducing the burden of the lid tightening operation.

• Other commercial buildings and service facilities
• others

Adopting newly developed LEDs, it emits light in four directions, brightening all directions while reducing glare. Its waterproof performance is equivalent to IP5X, making it usable even in the rain. It uses nickel-metal hydride batteries for the power supply, allowing for repeated charging.

• Other commercial buildings and service facilities

The MIDAS gas detector is equipped with a variety of gas sensor cartridges that can detect asphyxiating gases, toxic gases, flammable gases, spontaneously combustible gases, corrosive gases, and oxidizing gases (including oxygen), making it suitable for industries such as semiconductors. By replacing the sensor cartridge, you can quickly detect the desired gas! *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The CLED-2004 features a safety design compliant with the Electrical Appliance and Material Safety Law. It is suitable for use inside panels with a dielectric strength of 2000V, making it easy to switch from a 10W fluorescent lamp. 【Features】 【Safety】 This LED lighting is designed with superior safety in compliance with the Electrical Appliance and Material Safety Law. 【Dielectric Strength】 It has a dielectric strength performance of AC2000V/min, suitable for use inside panels. 【EMC】 Compliant with CISPR15, it operates with low noise and has minimal impact on other devices. 【Compatibility】 It has a mounting pitch of 280mm, suitable for switching from a 10W fluorescent lamp. It can also be mounted using the 296mm pitch of the conventional CLED-1004, demonstrating excellent compatibility. 【Energy Saving】 It consumes about half the power compared to traditional fluorescent lamps. 【Insect Repellent】 It emits very little ultraviolet light, preventing pests from being attracted to the panel and its surroundings, thus blocking their intrusion. *For more details, please refer to the catalog or feel free to contact us.

• Substation equipment

**Features** 1. This is a specialized clipper for wiring ducts, allowing for a one-punch cut at the wire outlet. Traditionally, cutting the bottom required multiple attempts with side cutters, followed by finishing with a file. However, using the wiring duct cutter, cuts can be made in one punch for ducts up to 80mm in height. 2. By using the protruding part of the blade from the side of the duct, it allows for free cutting regardless of the height of the duct. *For more details, please refer to the PDF document or feel free to contact us.*

• Piping and electrical wiring materials

【Usage】 Please use it as an insulating base for equipment installation such as distribution boards, control panels, and rectifier panels, as well as for insulating support for busbar wiring and electrical wiring. 【Features】 It is molded from "syndiotactic polystyrene," one of the lightest resins among engineering plastics, and has excellent heat resistance! Additionally, it has high resistance to oils and aliphatic solvents in terms of chemical resistance. *For more details, please refer to the PDF document or feel free to contact us.*

• Piping and electrical wiring materials
• Wiring devices
• Work tools

【Usage】 This can be used as an extension bracket (joint) for existing DIN rails during on-site modifications. 【Features】 1. No drilling or tapping is required when adding extensions. 2. There are two types available: a straight extension type and a type that can extend 90 degrees forward. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

【Features】 1. The appearance is beautiful and rust-free due to the nickel-plated finish on brass. 2. The hexagonal cross-section makes tightening easy. 【Material】 Nickel-plated brass. *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels
• Piping and electrical wiring materials
• Safety and consumables

Instantly absorbs sweat to the inside, keeping the surface dry! The silky feel lasts.

• Other earthworks, foundation works, and exterior floors

The "crosswalk" that we casually cross is a dangerous place for those with visual impairments. They listen for footsteps and the sound of car engines, desperately crossing even a few meters of crosswalk. To ensure that these individuals can cross safely, we want to promote the "LED-equipped sound guidance device" with easily visible LED lights placed before the crossing. May we create a world where everyone can walk freely outside.

• others

The gas detector, which was supposed to be prepared for emergencies, is meaningless if it does not detect gas or issue an alarm when the time comes. Our company recommends annual inspections and calibrations for peace of mind and safety.

• Other analytical equipment

1. Type A Fall Arresting Device Full Harness: DL-C1J-H - Easy to operate with one hand using a quick connect buckle - Adopts a horizontal type hip belt - Supports a maximum weight of 100kg 2. Fall Arrest Lanyard: DL-C1J-SL/DL-C1J-DL - Type 2 lanyard with fewer restrictions on connection points - Lightweight hook (260g) for easy handling - Hooks and straps have a strength that exceeds that of Type 1.

• Steel structure construction
• Steel structure construction

Selectable from 14 types of gases Target gases: O2, CO, H2S, SO2, PH3, NO, NO2, HCN, Cl2, ClO2, NH3, ETO/C2H4O, O3, H2, CO2, HCL, HF - Easy operation with a one-touch button - Dustproof and waterproof (IP-68) - Explosion-proof structure - Compatible with automatic calibrator INTELLIDOX - A separate license agreement is required for using the wireless transmission function. - Data logging can be transmitted using Bluetooth functionality (no license agreement required)

• Other analytical equipment
• Environmental Survey

The "DH Holder Plug Fuse Mounting Type" is a structural material for panels that allows you to secure a plug fuse connection base at any position on a DIN rail by simply tightening one fixing screw. It uses countersunk screws for the mounting screws (with countersunk processing for the screw holes) to create a flat mounting surface. The connection base for the plug fuse is pre-tapped for easy installation. Please use it as a mounting bracket when securing the Fuji Electric plug fuse connection base (model number: AFA60) to our DIN rail. 【Features】 ■ Can be fixed at any position on the DIN rail by simply tightening one fixing screw. ■ Uses countersunk screws for the mounting screws (with countersunk processing for the screw holes) to create a flat mounting surface. ■ Pre-tapped for easy installation of the plug fuse connection base. *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

【Features】 Once the outlet is attached to the bracket, it can be mounted onto the DIN rail with a single touch without the need for tools, thus achieving labor-saving efficiency. Additionally, during maintenance, the outlet can be attached and detached without removing it from the bracket. *For more details, please refer to the PDF document or feel free to contact us.*

• Structural Materials

The "DH Holder Protective Cover Mounting Type" is a structural material for panels that allows for easy installation of a protective cover around the conductive parts of DIN rail-compatible relays by fastening it together with terminal block mounting brackets. Please use it as a mounting base when using protective covers with our DIN rail-compatible relays. Custom sizes (height, width) can also be manufactured. 【Features】 1. By fastening it together with terminal block mounting brackets, you can easily install a protective cover around the conductive parts of DIN rail-compatible relays. 2. We also offer sales as a set with mounting brackets. Please order by adding a "T" at the end of the model number (e.g., DHC-35T). 3. Custom sizes (height, width) can also be manufactured. *For more details, please refer to the PDF materials or feel free to contact us.

• Structural Materials

This is a structural material for panels that allows you to install taps at any position on a DIN rail. 【Features】 ■ Can install taps at any position on the DIN rail ■ Can also be used as terminal fittings (fasteners) for the rail *For more details, please refer to the PDF document or feel free to contact us.

• Structural Materials

The "Free Slip (Powder Sprinkling Type)" is a vinyl sheet that has no stickiness and excellent slip properties. This product is suitable for cutting and welding processing. It complies with Ministry of Health Notification No. 20 and is safe (with usage restrictions). Additionally, our company offers various vinyl sheets, including transparent, frosted, lantern, and dotted patterns. Please choose according to your needs. 【Features】 ■ No stickiness ■ Excellent slip properties ■ Complies with Ministry of Health Notification No. 20 *For more details, please refer to the PDF materials or feel free to contact us.

• others

This product is electrical construction equipment that can be used widely for insulation in places such as distribution rooms and electrical construction sites. You can choose from two thicknesses: "6mm" and "10mm." We can also cut it to your desired dimensions. 【Specifications】 ■6mm ・Test Voltage: 15,000V (for 1 minute) ・Operating Voltage: 6,600V ・Weight: 9kg/m² ■10mm ・Test Voltage: 20,000V (for 1 minute) ・Operating Voltage: 6,600V ・Weight: 12kg/m² *For more details, please refer to the PDF document or feel free to contact us.

• Rubber sheet

The "Low Voltage Double Layer Gloves Type A" are electric gloves that can be used for live work on electrical circuits below 600V. They have a layer of synthetic fiber in the middle, making them resistant to tearing during work and providing good usability. (Usage voltage: 600V or less; test voltage: 3,000V for 1 minute) Additionally, our company offers a variety of electric gloves and boots, including "Low Voltage Double Layer Gloves Type B," "Low Voltage Foam Gloves," and "Insulated Rubber Boots." 【Features】 ■ Structure with a layer of synthetic fiber in the middle ■ Resistant to tearing during work ■ Good usability *For more details, please refer to the PDF document or feel free to contact us.

• others

The product is a Zerust film processed with a volatile rust inhibitor. The film has no front or back, making it suitable for long-term storage and transportation. It allows for significant labor reduction and is available in three types: for iron, for non-ferrous metals, and for both iron and non-ferrous metals. 【Features】 ■ Long-term rust prevention even in harsh environments ■ Significant reduction in work burden ■ The film has no front or back ■ Suitable for long-term storage and transportation ■ Allows for significant labor reduction *For more details, please refer to the PDF document or feel free to contact us.

• others

This product can be used for marking distribution boards, control panels, monitoring panels, etc., in telecommunications construction, signal construction, and instrumentation construction. The material is made of vulcanized fiber. The thickness of the fiber is 1.0mm white, and the tying cord is made of low-twist cotton thread (fishing line) with a length of 120mm. 【Lineup (excerpt)】 ■FN-M-15 ■FN-M-20 ■FN-M-25 ■FN-D-10 ■FN-K-20, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

Since its launch in 1956, it has been used in various fields such as construction, shipbuilding, and railway vehicles, and it has a wealth of achievements, especially in public works. 【Features】 ■ Excellent adhesion and waterproofing, maintaining sealing performance over a long period. ■ Fine texture and non-sticky, making it easy to work with. ■ Solvent-free type, with no irritating odor. Excellent workability at low temperatures. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Repair Sealant Material Rapid Powder RPPW" hardens in 3 to 5 hours at room temperature and is a construction material for electrical work that forms a strong barrier with heat resistance (heat resistance temperature of 1000°C). This product can completely fill complex areas without damaging various cables. Additionally, it can be easily removed when demolition is required. It does not have any direct impact on the human body. 【Features】 ■ Excellent heat resistance (heat resistance temperature of 1000°C) ■ Forms a strong barrier ■ Does not damage various cables ■ Can completely fill complex areas ■ Can be easily removed *For more details, please refer to the PDF document or feel free to contact us.

• others

This product can be used as a binding cord for telecommunications lines, power cables, signal cables, etc. Additionally, its applications are diverse, including bundling wires in distribution boards, vehicles, and securing wire bundles on cable racks. It is adopted by NTT, JR, various power companies, and private railways. 【Lineup】 ■KRE-3 ■KRE-4 ■KRE-5 ■KRE-5 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Cable Cleat" we handle is an electrical construction material with excellent compressive strength, electrical insulation, rust resistance, water resistance, and dimensional accuracy. This product is lightweight and can be freely colored. 【Features】 ■ Lightweight ■ Rust-resistant ■ Excellent compressive strength, electrical insulation, rust resistance, water resistance, and dimensional accuracy ■ Can be freely colored *For more details, please refer to the PDF document or feel free to contact us.

• others

We handle the "Shunt Wire Type S," which is a terminal. This product is a flexible terminal that uses a flat braided flexible wire made of copper fine wire twisted into a rectangular shape as the conductor. We can also accommodate orders for special dimensions. Please send us your drawings. 【Lineup (excerpt)】 ■S-100N ■S-200N ■S-300N ■S-400N ■S-600N, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a label that can be attached in two places, ensuring that the mark does not move or become misaligned. It has been treated to enhance ink absorption on the surface, so if printed with oil-based ink, it will not fade. It is highly flexible and can be attached along the curves of wiring and bends in the electrical wires. 【Features】 ■ Attached in two places ■ Mark does not move or become misaligned ■ Excellent flexibility ■ Can be attached along wiring curves and bends in electrical wires *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Insulation Cover for Conductor (Busbar) Connection Parts" is an insulation cover that allows for easy insulation and covering of busbar connection parts with a wide variety of shapes and numbers. There is also a type available that does not have a connection bar. In addition to the four types listed in the lineup, we offer various sizes, so please feel free to inquire. 【Lineup】 ■TB-11 ■TB-12 ■TB-13 ■TB-14 *For more details, please refer to the PDF document or feel free to contact us.

• others