ウェーブフロント List of Products and Services

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations with fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis even for complex models. - As a strength of our in-house developed software, it can perform CCP and magnetron sputtering calculations with standard features, and customization to fit customer devices is also possible. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

**Features** - By adopting an unstructured mesh, it is possible to compute the exact shape of complex real devices. - High parallel efficiency allows for quick computation results even for large-scale shapes. - Since it employs a particle method, unlike fluid models, it can obtain a converged solution even with poor quality computational grids. - With comprehensive technical support, even those new to simulation or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow in a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Chemical vapor deposition (CVD), organic light-emitting diode (OLED), molecular beam epitaxy (MBE). - Film deposition simulations involving chemical reactions like CVD. **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Multiple reaction equations can be set up on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

Are you facing issues like these? ◆ Unable to understand or explain the content of algorithms built using machine learning ◆ Being told to consider machine learning, but there are few tools available for immediate use ◆ Receiving proposals for project implementation, but the costs are too high to afford... etc. In the "Seminar Materials on Machine Learning Using SPM and Predictive Analysis of Concrete Strength," we will take concrete as an example to explain: ◆ Why are traditional statistical methods not being effectively utilized? ◆ Why is machine learning being utilized? ◆ How has machine learning been applied?

• Other Software

Our company, which is engaged in a wide range of activities from software development and sales for scientific technology and engineering simulation to consulting, is currently offering a free technical document titled "Predictive Maintenance Starting from Zero with IoT," which condenses our know-how! This document introduces how to start predictive maintenance in a way that aligns with real-world practices, which is not often covered elsewhere. By reading it, you will understand the "specific steps" to take when building a system. [Contents Overview (Partial)] ■ What to start with for predictive maintenance ■ Organizing and digitizing information ■ Analyzing failure information ■ Examining information obtained from sensors *You can view it immediately from the "PDF Download."

• Scientific Calculation and Simulation Software
• Analysis and prediction system

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja, an expert in plasma simulation at the University of Texas at Austin. It has the most extensive track record in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Ignition plugs (spark plugs) - Circuit breakers - Atmospheric pressure discharge - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• others

VizSpark is an arc plasma simulation software developed by Esgee Technologies in the United States, founded by Professor Raja from the University of Texas at Austin, an expert in plasma simulation. It has the most extensive track record in the analysis of spark plugs and circuit breakers, with many case studies presented at academic conferences. In Japan, it has a strong track record primarily among complete vehicle manufacturers and internal combustion engine-related manufacturers, and it supports the analysis of devices such as: - Ignition plugs (spark plugs) - Circuit breakers - Atmospheric pressure discharges - Plasma torches (plasma jets) - Welding - Thermal spraying - High-intensity lamps

• others

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP, and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!

• Other Software

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses, such as examining optimal shapes, identifying the causes of problems, and verifying performance—tasks that were traditionally outsourced—this leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software
• Other CAD
• Other Software

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated on SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape evaluation, root cause investigation, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software
• Other Software
• Other CAD

This software comprehensively evaluates and supports Reliability, Availability, Maintainability, and Safety from the development stage of railway vehicles and railway signals through the usage stage until the end of the product's life. The Reliability Workbench (RWB), Availability Workbench (AWB), and HAZOP are reliability and safety evaluation support tools developed by Isograph, a company based in the UK. The Reliability Workbench has been implemented in over 10,000 sites worldwide. We also offer a free demo version, so please feel free to contact us.

• others

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape exploration, problem identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software
• Other Software
• Other CAD

- Are you still using Excel for functional safety tasks? - Are you spending an enormous amount of time calculating failure rates and referencing FMEDA? - Are you manually creating FT diagrams from scratch? ========= Isn't it time to try using tools? ========= 【Benefits of Using Tools】 1. Standardize the workflow for functional safety tasks and eliminate issues related to individual reliance. 2. Ensure traceability by transferring IDs between safety requirements, FMEDA, and FTA. 3. Import/export standard formats of FMEA/FMEDA. 4. Enable bulk conversion from FMEA/FMEDA to FT diagrams. 5. Standardize evaluation points for FTA results (cut set analysis results). 6. Effectively utilize the rich information obtained from cut sets: - Q [failure rate after exposure time] - Q/T [failure rate per unit time] - Importance, risk increase (reduction) value - Information on dependent failures and common cause failures - β model - Validity of model representation - Comparison with FMEDA 【Others】 Integration with external tools such as Doors and electronic CAD is also possible.

• others

This document introduces the evaluation of systems (systems and subsystems) and management through CMMS/EAM. It covers issues encountered when applying Reliability Centered Maintenance (RCM), considerations for implementing RCM, reliability information, evaluation of reliability and availability at the system level, formulation of maintenance strategies, and management points in CMMS/EAM. [Contents] ■ Reliability Centered Maintenance ■ Issues when applying RCM ■ Considerations for implementing RCM and reliability information ■ Evaluation of reliability and availability at the system level and formulation of maintenance strategies ■ Management points in CMMS/EAM ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

• others

This document introduces examples of conducting reliability assessments for systems. By evaluating the reliability of a system, one can understand the overall reliability of the system and the importance of the components that make up the system. Methods for evaluating reliability include Reliability Block Diagram (RBD) analysis and Fault Tree Analysis (FTA). [Contents] ■ Reliability Block Diagram (RBD) analysis ■ Examples of system reliability assessment ■ Figures 1-6 ■ Considerations for maintenance ■ Development of maintenance plans *For more details, please refer to the PDF document or feel free to contact us.

• others

This document introduces Weibull analysis. Weibull analysis is a method that uses the number of failures as input to determine the unreliability. Once the unreliability is known, the failure rate and reliability can also be determined. (Refer to the relationship between failure rate and reliability) To express the bias in the occurrence of failures, Weibull distribution is used in failure analysis. By using Weibull distribution, it has become possible to express the bias in the occurrence of failures, including the probability density of failure occurrence.

• others

This document introduces the relationship between failure rate, reliability, unreliability, and failure probability density, among other reliability information. There is a close relationship between reliability, unreliability, failure probability density, and failure rate (which can be viewed from different perspectives as needed); knowing one allows you to understand the other indicators. When managing failures using CMMS/EAM, it is possible to aggregate the number of failures over time. If the number of failures over time is known, the time dependency of failure rate, reliability, and unreliability can be understood. Weibull analysis is a method of failure analysis that takes advantage of this characteristic. [Contents] ■ The relationship between failure rate, reliability, failure probability density, and unreliability ■ Detailed explanation of the diagrams ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company offers analysis software specialized for semiconductor-related equipment. We have a lineup of rarefied fluid analysis software and plasma analysis software, which are actively used in simulations for organic EL and magnetron sputtering. This is for those who are facing challenges such as "I want to develop new products," "I want to create and verify actual equipment during product improvement," or "I want to conduct preliminary verification and comparative verification with equipment." Additionally, since these are in-house developed products, we provide extensive support even after implementation. 【Lineup / Features】 《Rarefied Fluid Analysis Software 'DSMC-Neutrals'》 ■ Supports unstructured meshes, allowing calculations for complex shapes ■ Capable of simulating gas flow throughout the entire equipment 《Plasma Analysis Software 'Particle-PLUS'》 ■ Enables low-pressure plasma simulations ■ Useful for research, development, and manufacturing of devices and materials using plasma *For more details, please refer to the materials. Feel free to contact us as well.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

The hardware architecture required by ISO26262 PART 5 often utilizes SN29500 for quantitative evaluation using metrics; however, a limitation of SN29500 is that it does not correspond to mission profiles. However, ISO26262 PART 11 describes how to apply mission profiles to SN29500. Additionally, a calculation method based on the above approach has been published as a guideline by JASPAR. Document title: "Hardware Failure Rate Guidelines Ver.1.0." Our company participates as an editorial member of JASPAR's Functional Safety Working Group and provides a package that includes software for easily performing calculations based on the mission profiles described in the guidelines, along with the SN29500 Reliability Handbook, as a support tool compliant with ISO26262 2nd Edition. This package supports failure rate calculations for both SN29500 and IEC61709.

• others

"Particle-PLUS" is a simulation software suitable for research and development of devices and equipment using plasma, compatible with CCP. - Excels in simulating low-pressure gases where fluid models are difficult to compute. - Advanced physical model analysis including CCP and external circuit models. - Supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it not only includes standard functions for CCP and magnetron sputtering calculations but also allows customization to fit customer equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

Our company, which is engaged in a wide range of activities from software development and sales for scientific technology and engineering simulation to consulting, is currently offering a free technical document titled "Reliability-Centered Maintenance (RCM) and CMMS," condensed with our know-how! What is Reliability-Centered Maintenance? From basic knowledge to characteristics of failures and methods for determining optimal maintenance strategies, we provide plenty of tips essential for the implementation of CMMS and EAM. You will acquire knowledge about "things you can't ask others about" regarding Reliability-Centered Maintenance (RCM) and CMMS! [Contents Overview (Partial)] ■ What is Reliability-Centered Maintenance? ■ Equipment Failure Characteristics ■ Maintenance Strategies (with Decision Tree) ■ Expansion and Integration with CMMS/EAM *You can view it immediately from "PDF Download."

• Scientific Calculation and Simulation Software
• Analysis and prediction system

With the growing interest in autonomous driving, the complexity of onboard systems is expected to increase, necessitating not only safety requirements but also security assessments. In Europe, security evaluations are already being conducted in parallel with safety assessments, and one method for conducting security evaluations is the attack tree. The Attack Tree security threat analysis tool provided by Isograph (UK) is designed to assist in evaluating security vulnerabilities in software. For example, it allows for the following expressions: - A visual representation of how an attack can succeed - A probability distribution showing which attacks have the highest likelihood of success Furthermore, it can also represent indicators such as: - The method that is the lowest cost and has the highest probability of success for the attacker - The difficulty of executing the attack and whether special equipment is required Security assessments are directly related to the safety of vehicles. By referencing the probabilities of threats identified using the Attack Tree within the functional safety Fault Tree, it becomes possible to conduct evaluations that consider both safety and threats.

• others

"Particle-PLUS" is a simulation software suitable for research and development of devices using plasma, compatible with CCP. - Excels in plasma simulation for low-pressure gases, where fluid modeling is challenging. - Advanced physical model analysis, including CCP and external circuit models. - Supports 2D and 3D, efficiently analyzing even complex models. - As a strength of our in-house developed software, it offers standard functions for CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive Coupled Plasma (CCP) - Dielectric Barrier Discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

◆Do you have any of the following concerns?◆ - You have collected failure information but don't know what to do with it. - You want to effectively utilize the collected failure information. - You want to analyze the failure information yourself but don't know the best method. - You want to connect the analysis results to actions to reduce opportunity loss. ◆Organizing Failure Information Data and Building a System◆ Our company addresses the above concerns by: 1. Clarifying the problem awareness. 2. Presenting and selecting the key performance indicators (KPIs) to be calculated. 3. Creating a database for failure information. 4. Conducting analysis using the current failure data. 5. Considering actions derived from the analysis results. 6. Building a system to carry out steps 1 to 5. We assist in organizing failure information and building a system that allows customers to select actions that could reduce defects or failures leading to opportunity loss based on the analysis results. The above content assumes that failure information has been collected in advance, but we can also accommodate situations where failure information is extremely limited or not collected at all. (*1) *1: Please contact us separately if you would like to see detailed materials.

• others

◆Do you have any of the following concerns?◆ - You have gathered failure information but don't know what to do with it. - You want to make good use of the collected failure information. - You want to analyze the failure information yourself but don't know the best method. - You want to connect the analysis results to actions to reduce missed opportunities. ◆Organizing Failure Information Data and Building a System◆ Our company addresses the above concerns by: 1. Clarifying the problem awareness. 2. Presenting and selecting the key performance indicators (KPIs) that should be calculated. 3. Creating a database for failure information. 4. Conducting analysis using the current failure data. 5. Considering actions derived from the analysis results. 6. Building a system to carry out steps 1 to 5. We assist in organizing failure information and building a system that allows customers to choose actions that could reduce defects and failures leading to missed opportunities based on the analysis results. The above content assumes that failure information has been collected in advance or can be collected, but we can also respond if the failure information is extremely limited or not gathered at all. (*1) *1: Please contact us separately if you would like to see detailed materials.

• others

◆Do you have any of the following concerns?◆ - You have gathered failure information but don't know what to do next. - You want to make good use of the collected failure information. - You want to analyze the failure information yourself but don't know the best method. - You want to connect the analysis results to actions that reduce missed opportunities. ◆From organizing failure information data to building a system◆ Our company addresses the above concerns by: 1. Clarifying the problem awareness 2. Presenting and selecting the key performance indicators (KPIs) to be calculated 3. Creating a database of failure information 4. Conducting analysis using the current failure data 5. Considering actions derived from the analysis results 6. Building a system to carry out steps 1 to 5 We assist in organizing failure information and building a system that allows customers to select actions that are likely to reduce issues and failures leading to missed opportunities based on the analysis results. The above content assumes that failure information has been collected in advance, but we can also accommodate situations where failure information is extremely limited or not gathered. (*1) *1: Please contact us separately if you would like to see detailed materials.

• others

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - It can perform advanced physical model analyses such as CCP and external circuit models. - It specializes in plasma simulations in low-pressure gases, where fluid modeling is challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis of complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

"Materials Studio" A suite of molecular modeling/simulation tools for next-generation materials development equipped with quantum mechanics (density functional theory), classical mechanics (molecular dynamics calculations), mesoscale (dissipative particle dynamics calculations, etc.), statistics, and analysis/crystallization tools. 【Features】 ■ Simulation software that streamlines material development Available for use by those engaged in research, development, design, and manufacturing across various industries and fields. ■ Supports various types of materials Effective in predicting how the structure of atoms and molecules relates to the physical properties and behaviors of materials in the fields of materials science and chemistry, aiding in the understanding of physical phenomena. ■ Examples Tribochemical (lubrication) reactions Research and development of crystal growth, thin film formation, fuel cells, lubricants, etc. Catalysts, polymers and mixtures, metals and alloys, batteries and fuel cells, etc. ■ Enhanced visualization with "Materials Studio Visualizer" ■ All tasks, including crystal structure creation, calculation condition settings, and calculation result display, can be performed on a single GUI screen. *For more details, please feel free to contact us.

• Other Software
• others

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit the customer's equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other analytical equipment

Our company offers analysis software specialized for semiconductor-related equipment. We have a lineup of rarefied fluid analysis software and plasma analysis software, which are effective for simulations of organic EL and magnetron sputtering. We can also accommodate customer needs. 【Product Lineup】 《Rarefied Fluid Analysis Software 'DSMC-Neutrals'》 ■ Supports unstructured meshes, allowing calculations for complex shapes ■ Capable of simulating gas flow throughout the entire device 《Plasma Analysis Software 'Particle-PLUS'》 ■ Enables low-pressure plasma simulations ■ Useful for research, development, and manufacturing of devices and materials using plasma With these two systems, we can support various simulations in semiconductor manufacturing, including thin film generation, sputtering, and plasma etching. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

Support from failure rate calculation to report creation in one go! Reliability Workbench is a tool based on reliability engineering used for evaluating and analyzing reliability and safety in accordance with functional safety standards. It has been adopted by many companies both domestically and internationally as a tool for evaluating the reliability and safety of equipment required by functional safety standards such as IEC61508 and ISO26262, with a total of 8,000 sites having implemented it worldwide. The main industries where it has been adopted are as follows: - Automotive - Railways - Aircraft - Plants - Industrial equipment In Japan, many automotive-related companies, including Denso Corporation, as well as railway-related customers such as Japan Signal and Nabtesco, have adopted this tool, with over 50 customers in the automotive and railway sectors alone. Additionally, this tool has the following features that support standardization and simplification of work: - Integration with electronic CAD - Database creation of failure data - Automatic deployment of failure modes and distribution ratios to FMEA - Cross-checking between FMEA and FaultTree+

• Other Software

AiPOST is an information sharing and management system developed with the aim of systematizing the circulation of paper-based forms. It is particularly recommended for customers facing the following issues: - Wanting to share information that has occurred on-site immediately, but having no means other than phone calls, resulting in no record being kept. - Wanting to circulate information related to events that occurred on-site, but having inconsistent methods among individuals, making it difficult to know where the information is located. - Having made a work request but being unable to grasp the current status. - Distributing information via email, but with various types making it difficult to discern which information is relevant to oneself. - Wanting to centrally manage inquiry information from customers and analyze it in Excel as needed. Additionally, there has been an increase in the use of AiPOST in conjunction with business systems and email, allowing for the following functionalities: 1. Sending email notifications when information or requests related to oneself arrive. 2. Managing the progress of work on the AiPOST side, simplifying the status confirmation of requests and information distribution. 3. Treating AiPOST as an input terminal in conjunction with maintenance systems, allowing overall equipment information management to be handled by the maintenance system.

• others

We combine simulation technology and reliability evaluation with insights into equipment maintenance to support the construction of systems related to data collection and visualization, analysis, product improvement, optimization of operating conditions, and predictive maintenance. The main target equipment includes: - Various plants - Semiconductor manufacturing equipment - Air conditioning systems In this study, we support the construction of systems by using different tools and systems according to the customer's requests and objectives, such as: - 1D simulation software (1D CAE) - 3D simulation software (3D CAE) - Reliability and safety evaluation software - Statistical analysis software - Machine learning/AI software - IoT information collection infrastructure - Equipment maintenance management systems - Tablet systems Additionally, in conducting this study, we recommend starting small by narrowing down the target equipment.

• others

AiPOST is an information sharing and management system developed with the aim of systematizing the circulation of paper-based forms. It is particularly recommended for customers facing the following issues: - Unable to grasp the current status after making a work request - Distributing information via email, but the types are varied, making it difficult to understand which information is relevant to them - Wanting to centrally manage inquiry information from customers and analyze it in Excel as needed Additionally, there has been an increase in the use of AiPOST in conjunction with business systems and email, enabling the following functionalities: 1. Sending email notifications when information or requests relevant to the user arrive 2. Managing the progress of tasks on the AiPOST side, simplifying the status checks and information distribution 3. Treating AiPOST as an input terminal in conjunction with maintenance systems, allowing overall equipment information management to be handled by the maintenance system.

• others

AiPOST is an information sharing and management system developed with the aim of systematizing the circulation of paper-based forms. It is particularly recommended for customers facing the following issues: - Unable to grasp the current status after making a work request - Information is being disseminated via email, but the types are varied, making it difficult to understand which information is relevant to them - Want to centrally manage customer inquiry information and analyze it in Excel as needed Additionally, there has been an increase in the use of AiPOST in conjunction with business systems and email, allowing for the following functionalities: 1. Notifications via email when information or requests related to them arrive 2. Management of work progress on the AiPOST side, simplifying the status confirmation of requests and information dissemination 3. In collaboration with maintenance systems, treating AiPOST as an input terminal while managing overall equipment information within the maintenance system

• others

**Features** - Adopts unstructured mesh, allowing for calculations that directly reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale shapes. - Utilizes a particle method, ensuring convergence solutions even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulations or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Simulation of thin film generation in semiconductor manufacturing processes such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE). **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

Many companies have proposed maintenance methods utilizing large-scale data and AI (artificial intelligence/machine learning), and there are numerous reports on their effectiveness. However, with a few exceptions, the management of maintenance on-site is predominantly done using various formats such as paper, Excel, Access, and PDF, and the information managed differs by department. Our company provides services to address the following objectives through the organization of equipment ledgers: 1. To establish a ledger of data that serves as the foundational requirements for the implementation of a maintenance system. 2. To utilize accumulated failure information on-site to formulate inspection cycles that minimize costs. 3. To consider maintenance methods tailored to the conditions, as usage and environments differ even for the same equipment. 4. To create a risk matrix from accident and failure information. 5. To graph the relationship between maintenance items, reliability, and costs, and use it as a guideline for planning. The steps for organizing the equipment ledger are as follows: 1. Digitization of various information. 2. Organization and classification of the digitized information. 3. Conducting various analyses according to objectives. 4. Adding management items based on the analysis results.

• others

FLiPS is a facility maintenance management system developed with the aim of providing a user experience similar to that of Excel, and it is particularly recommended for customers facing the following issues: - A user-friendly interface that is easily accepted on-site and the desire to integrate with ERP systems. - The need to link product quality with facility maintenance for centralized management. - The desire to visualize the costs, schedules, and actual results necessary for facility maintenance in a calendar format. - The need to understand the frequency and number of unexpected failures and to establish maintenance plans that reflect actual conditions. - The desire to know the optimal cycle for regular inspections and replacements. - The need to streamline budget formulation related to equipment purchase and maintenance management. Additionally, it has recently been integrated with various IoT-related products, enabling the following capabilities: 1. Automatically creating and notifying maintenance and inspection plans when sensor data indicates thresholds are likely to be exceeded, notifying both managers and workers. 2. Integrating with tablet-compatible systems (such as i-Reporter) to aggregate and visualize information from the field.

• others

FLiPS is a facility ledger management system developed with the aim of providing a user experience similar to Excel, and it is particularly recommended for customers facing the following challenges: - A user-friendly interface that is easily accepted on-site, with a desire for integration with ERP systems - The need to link the quality of manufactured products with the facility ledger for centralized management - The desire to visualize the costs, schedules, and actuals necessary for equipment maintenance in a calendar format - The need to understand the frequency and number of unexpected failures to establish a maintenance plan that reflects actual conditions - The desire to know the optimal cycle for regular inspections and replacements - The need to streamline budget formulation related to equipment purchase and maintenance management Additionally, it is now integrated with various IoT-related products, enabling the following capabilities: 1. Automatically creating and notifying maintenance and inspection plans when sensor data indicates thresholds are likely to be exceeded, notifying both managers and workers 2. Integrating with tablet-compatible systems (such as i-Reporter) to aggregate and visualize information from the field.

• others

Many companies have proposed maintenance methods utilizing large-scale data and AI (artificial intelligence/machine learning), and there are numerous reports on their effectiveness. However, with a few exceptions, the management of maintenance on-site is primarily conducted using various formats such as paper, Excel, Access, and PDF, and the information managed differs by department. Our company provides services to address the following objectives through the construction of equipment records: 1. We want to organize a ledger of data that serves as the foundational requirements for the introduction of a maintenance system. 2. We want to utilize the accumulated failure information on-site to establish inspection cycles that minimize costs. 3. We want to consider maintenance methods tailored to the situation, as the usage conditions and environments differ even for the same equipment. 4. We want to create a risk matrix from accident and failure information. 5. We want to graph the relationship between maintenance items, reliability, and costs to serve as a guideline for planning. The steps for constructing equipment records are as follows: 1. Digitization of various information. 2. Organization and classification of the digitized information. 3. Implementation of various analyses according to objectives. 4. Addition of management items based on the analysis results.

• others

Simulation Analysis of Dust Behavior Affecting Contamination Initially compatible with various simulations 【Features】 ■ By adopting unstructured meshes, it is possible to compute the exact shape of complex actual devices. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can always be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic EL (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computation results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Hydrogen/Fuel Cells
• Other Software

Simulation analysis of gas flow in a shower head type CVD device Initially supports various simulations 【Features】 ■ Adopts unstructured mesh, allowing for calculations that reflect the complex shapes of actual devices ■ High parallel efficiency enables quick computation results even for large-scale geometries ■ Utilizes a particle method, ensuring convergence to a solution even with poor-quality computational grids, unlike fluid models ■ Comprehensive technical support allows beginners and those busy with experiments to reliably achieve results ◆ Supports various cases ◆ - Simulation of dilute gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as chemical vapor deposition (CVD), organic light-emitting diode (OLED), and molecular beam epitaxy (MBE) ◆ Outputs various computational results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.*

• Scientific Calculation and Simulation Software

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Other Software

This is an introduction to a case where the "FLiPS" maintenance calendar system was implemented for asset management aimed at extending the lifespan of sewer facilities in Sendai City. This page includes not only the "system configuration" such as servers and clients, but also "PDCA for maintenance based on risk assessment" and "examples of risk matrices." By considering various risks and extending the renovation period, cost forecasts have improved. 【Contents】 ■ System Configuration ■ PDCA for Maintenance Based on Risk Assessment ■ Automatic Creation of Maintenance Plans ■ Examples of Risk Matrices ■ Risk information is updated from GIS for pipes and from the FLiPS management screen for facilities. *For more details, please refer to the catalog or feel free to contact us.

• Other Software
• Construction and process management software

FLiPS is a system that can centrally manage the following items required by the Green Management Promotion Manual. - Vehicle management - Maintenance inspection schedule - Evaluation and results of maintenance inspections - Management of documents related to various vehicles (maintenance procedures, maintenance inspection item lists, etc.) - Future vehicle introduction plans This system not only manages the above information but also allows for the output of reports and forms in any Excel format. If you use a tablet for maintenance inspection tasks, there is also a record of real-time reflection of the input data from the tablet to FLiPS.

• others

FLiPS is a system that can centrally manage the following items required by the Pharmaceutical Affairs Law and medical device safety management guidelines. - Start and end inspection checklists - Maintenance inspection planning sheets - Evaluation of maintenance inspections - Management of documents related to equipment - Breakdown repair records This system not only manages the above information but also allows for the output of reports and forms in any desired Excel format. If you use a tablet for maintenance inspection tasks, there is also a track record of transferring the input data from the tablet to FLiPS. Additionally, it is possible to manage items necessary for analysis using reliability engineering in conjunction.

• others