ローデ・シュワルツ・ジャパン List of Products and Services

The "R&S MXO 5 Series" is a high-speed, accurate signal analysis oscilloscope with a maximum of 8 channels, achieving an update rate of 4.5 million waveforms per second. Each channel is equipped with a digital trigger system with a minimum vertical axis of 0.0001 div. The system architecture, which realizes an 18-bit vertical axis resolution, ensures reliable triggering even for minute waveforms. 【Features】 ■ Performs 45,000 FFTs per second and can analyze up to 4 spectra simultaneously ■ Each channel is equipped with a standard memory of 500M points in parallel ■ Features a 15.6-inch full HD capacitive touchscreen ■ Available in 8-channel and 4-channel models ■ Bandwidth: 8 channels: 100MHz to 2GHz, 4 channels: 350MHz to 2GHz A live demo showcasing the clear performance differences compared to conventional models is currently available on our website. *For more details, please check our website. Feel free to contact us with any inquiries.

• others

The R&S NGM200 power supply, with high precision and short load recovery time, is ideal for challenging applications. By adopting a two-quadrant architecture, it can function as both a source and a sink when simulating batteries and loads. With a short response time, it can handle rapid load changes that occur, for example, when mobile communication devices switch from sleep mode to transmission mode. High-speed data capture and useful battery simulation features expand the range of applications.

• others

Rohde & Schwarz oscilloscopes feature excellent signal reproducibility, high-speed acquisition rates, innovative triggering systems, and advanced user interfaces. You can choose from a variety of oscilloscopes, ranging from general-purpose models for service, maintenance, and education to top-class measurement instruments for research and development or EMI debugging in the 600MHz to 8GHz range. By using the "R&S RTx-K31 Power Analysis Option," it becomes easier to analyze on/off operation, internal transfer functions of circuits, safe operating areas (SOA), output signal quality, and losses, and for measuring current signals, you can select from various types of Rohde & Schwarz probes. 【Features】 ■ Power analysis ■ Wideband and multi-channel RF signal analysis ■ Signal integrity, etc. *For more details, please download the PDF or contact us.

• others

The oscilloscope is a key measurement tool for engineers to test/evaluate power supply designs today. By adding the "R&S RTx-K36 Frequency Response Analysis (Bode Plot) Option," it can also be used as a low-cost alternative to low-frequency network analyzers or dedicated standalone frequency analyzers. This document provides detailed information on topics such as "Injection Points and Probing," "Device Settings," and "Measurement Results." [Contents] ■ Challenges ■ Rohde & Schwarz Solutions ■ Measurement Setup ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• others

The oscilloscope is a primary measurement tool used by engineers. By using the "R&S RTx-K36 Frequency Response Analysis (Bode Plot) Option," it is possible to easily and quickly analyze low-frequency responses with existing oscilloscopes. You can evaluate the frequency response of various electronic devices, such as passive filters and amplification circuits. This document contains information about the device settings and measurement results for the "R&S RTx-K36 Frequency Response Analysis (Bode Plot) Option." [Contents] ■ Challenges ■ Rohde & Schwarz Solutions ■ Measurement Setup ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• others

Our oscilloscope portfolio is constantly being updated with new models, applications, and accessories to achieve high-quality analysis. The "oscilloscope" is equipped with excellent signal reproducibility, high-speed acquisition rates, an innovative triggering system, and an advanced user interface. You can choose from a variety of options, ranging from general-purpose products for service, maintenance, and education to top-class measuring instruments for research and development or EMI debugging in the 600 MHz to 8 GHz range. 【Lineup (partial)】 ■ Oscilloscope Portfolio - RTH1000 - RTC1000 - RTB2000 - RTM3000, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• others

In TDD networks, the same frequency is used for both downlink and uplink, which means that uplink signals and other existing signals can be masked by downlink signals. For technicians in the field, it is impossible to identify interference sources or pinpoint their locations using conventional spectrum measurements. However, by combining our compact yet highly efficient "R&S Spectrum Rider FPH" with a directional antenna, it is possible to identify and locate interference sources even in TDD networks. [Challenges] - Communication uplinks are more susceptible to interference than downlinks. - Uplink signals and other existing signals are masked by downlink signals. - It is impossible to identify interference sources or pinpoint their locations using conventional spectrum measurements. *For more details, please refer to the PDF document or feel free to contact us.

• others

The analysis of RF pulses is a crucial aspect of pulse radar applications such as air traffic control (ATC), maritime radar, and scientific measurements of the ionosphere. To obtain essential information for characterizing applications, analyzing the pulse envelope and modulation is indispensable. Using the R&S RTO and R&S RTP oscilloscopes enables precise triggering of pulses, which is a prerequisite for time-domain and frequency-domain analysis. 【Features】 ■ Analyze RF pulses up to the maximum bandwidth of the used model ■ Accurately trigger on pulse characteristics such as pulse width and power level ■ Digital triggering is a key feature that operates across the entire bandwidth ■ Perform accurate characterization of the envelope and modulation after pulse acquisition ■ Inter-pulse analysis of continuous pulses is also possible *For more details, please refer to the PDF document or feel free to contact us.

• others

"R&S CMWcards" is an intuitive and user-friendly software application that can be used to replicate field tests in a lab environment. Issues discovered during field tests are often difficult to reproduce due to the dynamic nature of real-world environments. This makes it challenging to validate fixes. By combining the "Field-to-Lab (F2L) application" with this product, you can replicate actual network scenarios in a lab environment. This allows for the investigation of most field-related issues in a controlled, reproducible, and deterministic manner. 【Features】 ■ CMWcards can be used without any programming knowledge ■ By simply setting up the arrangement of cards, you can create signaling test scripts to simulate various test scenarios and validate the protocol behavior of devices ■ Signaling flows comply with standards *For more details, please refer to the PDF materials or feel free to contact us.

• others

The global deployment of 5G NR TDD networks will take place in unknown radio environments. Exploration will be conducted manually as before, but automatic detection of interference signals will be helpful before the network begins to operate. There are advantages such as being able to identify potential interference signals and their characteristics much faster than when using manual techniques. 【Three Advantages】 ■ Potential interference signals and their characteristics can be identified much faster than when using manual techniques. ■ Since data collection and data analysis are conducted separately, the time-consuming task of data collection can be performed in a much shorter time by relatively less skilled personnel. ■ Experts in the interference exploration team can focus on pre-identified interference locations, increasing efficiency. *For more details, please refer to the PDF document or feel free to contact us.

• others

This document is a User Review from Inoue Workshop. It includes a report on the use of our oscilloscopes, the "Handheld Model" and the "Desktop Model." The company stated, "Not only does it have excellent basic performance, but the comfort of the user interface and the cleverness of the equipment configuration reflect a solid design philosophy common to German products used by professionals. The preconceived notion that there would be little difference from the oscilloscopes I had in mind before trying it diminished with use, to the point where I found myself wanting one." [Featured Products] ■ Handheld Model: R&S Scope Rider RTH1004 ■ Desktop Model: R&S RTM3004 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S ZNA Vector Network Analyzer" is equipped with excellent RF characteristics and a unique hardware architecture, making it easier than ever to perform demanding measurements. A DUT-oriented operating concept has been newly introduced, allowing for quick and easy execution of the necessary measurement setups. Additionally, the two independent touch screens enhance flexibility, enabling smooth and efficient operation. 【Features】 ■ Four phase-coherent built-in signal sources ■ Two built-in local oscillators for the receiver ■ Eight truly parallel measurement receivers ■ Four built-in pulse modulators ■ Mixer phase measurement that does not require a reference mixer *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S FPL1-K7" is a demodulation option that converts the "R&S FPL1000" into an analog modulation analyzer for amplitude, frequency, and phase modulation signals. It is capable of measuring not only modulation characteristics but also coefficients such as residual FM and synchronous modulation. Users can choose from low-pass, high de-emphasis, and weighting filters. 【Features】 ■ Demodulation option for R&S FPL1000 ■ Simple and easy to use ■ Converts to an analog modulation analyzer for amplitude, frequency, and phase modulation signals ■ Capable of measuring coefficients such as residual FM and synchronous modulation ■ Selectable from low-pass, high de-emphasis, and weighting filters *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S NRP Power Meter Series" enables highly reliable power measurements. The components of this series, including the R&S NRX base unit, R&S NRPV virtual power meter PC software, and a comprehensive portfolio of USB and LAN power sensors, all possess these characteristics. They are suitable not only for use in manufacturing, research and development, and calibration labs, but also for installation and maintenance work. 【Features】 ■ High cost performance and compact design ■ Comprehensive portfolio for power measurements from DC to 110 GHz, -70 dBm to +45 dBm ■ Achieves a dynamic range of up to 93 dB with 3-path diode power sensors ■ Accurate analysis of envelope power using wideband power sensors ■ High precision with thermal power sensors *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S NGL200 DC Power Supply Series" is suitable for challenging applications due to its high accuracy and short transient response time. By adopting a two-quadrant architecture, it can function as both a source and a sink when simulating batteries and loads. With a short transient response time, it can handle rapid load changes that occur, for example, when mobile communication devices switch from sleep mode to transmission mode. 【Features】 ■ High accuracy source/sink ■ Technology for very challenging tasks ■ Easy operation ■ Suitable for use in labs and test systems *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "R&S FPL1000 Signal Spectrum Analyzer" allows for quick and easy measurements. It features excellent RF performance, is lightweight and space-saving, and combines the functionality of a benchtop device with the portability of a handheld unit. In addition to spectrum analysis, it supports accurate power measurements through a power sensor and is capable of analyzing both analog and digital modulation signals. 【Features】 ■ Supports multiple applications with a single instrument ■ Reliable RF performance ■ Intuitive user interface ■ Fully portable ■ Low power consumption *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S Cable Rider ZPH 2-Port Model" performs all essential cable and antenna measurements required for the installation and maintenance of wireless transmission links in the field. It processes cable and antenna measurements quickly, with high speed and efficiency. The 2-port model comes equipped with more features, allowing for spectrum analysis (R&S ZPH-K1 option), an independent tracking source, and a built-in bias tee. 【Features】 ■ No calibration required - high-speed measurements ■ Fast startup/warm-up ■ Quick and accurate deployment with wizard function ■ Purchase only the necessary functions when needed ■ Remote operation via Android or iOS app *For more details, please refer to the PDF materials or feel free to contact us.

• others

The analysis of RF pulses is an important aspect of pulse radar applications such as air traffic control (ATC), maritime radar, and scientific measurements of the ionosphere. Using the "R&S RTO" and "R&S RTP" oscilloscopes, accurate triggering and analysis of RF pulses can be performed. This document explains how to demodulate RF pulses using the aforementioned equipment for further measurements. [Challenges] - Measurements related to frequency, modulation type, chirp rate, modulation sequence, pulse repetition interval (PRI), and amplitude are required. - It is necessary to trigger the pulse in a reproducible manner. *For more details, please refer to the PDF document or feel free to contact us.

• others

Compliance testing is essential to ensure that the timing, slew rate, and voltage levels of Dynamic Random Access Memory (DRAM) signals conform to specifications. By utilizing eye diagram testing, the time required for analyzing signal integrity conditions can be significantly reduced, allowing for quick inspection of signal quality. The following challenges are addressed by the "DDR3 Data Eye Diagram Test": [Challenges] ■ Lack of flexibility to quickly debug signal integrity issues ■ Need for separation of read/write operations ■ Overlapping of consecutive bits within a data burst for testing based on a simple mask *For more details, please refer to the PDF document or feel free to contact us.

• others

By using the "R&S CDS Campus Dashboard Software," you can easily guide student groups in labs equipped with multiple workbenches. It provides efficient training for students on oscilloscopes, spectrum analyzers, network analyzers, and power supplies. You can control various measurement functions, settings, firmware updates, and screenshots. 【Features】 ■ Streamlines teaching routines in large student labs ■ Controls up to 300 individual electronic measuring instruments from a single workstation ■ Sets the same conditions across all workbenches ■ Saves the settings of one instrument to share with all students ■ Collects results simultaneously from all students *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Campus Dashboard Software" is management software designed for large student labs. By using this product, you can easily guide student groups even in labs equipped with multiple workbenches. Additionally, you can access various measurement functions, settings, firmware updates, and screenshots. 【Features】 ■ Streamline teaching routines in large student labs ■ Manage up to 300 individual measuring instruments ■ Efficiently guide student groups from a single workplace ■ Control oscilloscopes, spectrum analyzers, power supplies, and VNAs ■ Set the same conditions across all workbenches *For more details, please refer to the PDF materials or feel free to contact us.

• others

The FaSTDa Racing Team was looking for equipment equipped with an integrated data logger for sensor data acquisition and long-term monitoring for troubleshooting and optimization of control units. It needed to be capable of CAN bus data analysis, and additionally, the oscilloscope for troubleshooting automotive issues had to be rugged, portable, and certified for high voltage measurements. Thus, the young engineer chose the portable "R&S ScopeRider RTH." The electronics of the team's new F18 Clara racing car have been optimized by this product. 【Case Overview】 ■ Customer: FaSTDa Racing Team, Darmstadt ■ Challenge: Testing of racing car electronics ■ Challenges - Monitoring and evaluation of CAN bus sensor data - High insulation resistance for testing functions such as ignition interruption *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S Cable Rider ZPH" is a cable and antenna analyzer equipped with all the essential measurement functions needed for the installation and maintenance of antenna systems in the field. With its unique features, it can perform cable/antenna measurements and spectrum analysis quickly and efficiently. The analyzer is equipped with a touchscreen and a large keypad designed for field use, ensuring excellent operability. 【Features】 ■ High speed ■ Efficiency ■ Standard measurement mode ■ Optional measurement modes ■ Model-specific measurement modes *For more details, please refer to the PDF document or feel free to contact us.

• others

The miniaturization of antenna feed electronic products is progressing due to integrated beamforming ICs. With a multi-port network analyzer, the necessary test setup can be consolidated into a single measuring instrument. This document presents the "Verification of Beamforming ICs for Phased Array Antennas" using Rohde & Schwarz solutions. [Contents] ■ Challenges ■ Rohde & Schwarz Solutions ■ Special needs for wideband modulated signals such as 5G NR and satellite communications *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S RTM3000" is an oscilloscope designed as a tool for everyday problem-solving. It features the Power of Ten (10-bit ADC, 10 times the memory, 10.1-inch touchscreen) and is compatible with all Rohde & Schwarz probes through the Rohde & Schwarz probe interface. Additionally, it is offered at a very attractive price and meets important conditions for investment protection. 【Features】 ■ 100 MHz to 1 GHz ■ 10-bit ADC ■ 80 M samples of standard memory ■ 10.1-inch capacitive touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S RTB2000" is an oscilloscope that maintains high resolution even when displaying large and small signals simultaneously. It features a customized 10-bit A/D converter designed by Rohde & Schwarz, providing four times the resolution compared to conventional 8-bit A/D converters. Additionally, it can capture long-duration acquisition sequences at high sampling rates, allowing for more detailed analysis results, making it effective for analyzing transient phenomena in switching power supplies. 【Features】 ■ Maintains high resolution even when displaying large and small signals simultaneously ■ Achieves long-duration capture even with full bandwidth measurements ■ 10.1-inch high-resolution capacitive touch screen that supports pinch in/out ■ Ideal for educational settings ■ Combines multiple functions into one unit, reducing space and cost *For more details, please refer to the PDF document or feel free to contact us.

• others

In the world of advanced power electronics, the acceleration of switching speeds has made EMI compliance a significant issue. To optimize gate drive from the development stage and minimize electromagnetic emissions, correlation measurements of time data and frequency data can be helpful. This document provides a detailed introduction to the "Optimization of Wide Bandgap Semiconductor Switches," discussing challenges and the solutions offered by Rohde & Schwarz. [Contents] ■ Challenges ■ Rohde & Schwarz Solutions ■ Applications - Correlation analysis of time data and frequency data using gated FFT - Optimization of gate drive voltage concerning EMI emissions - Further optimization procedures ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S Pulse Sequencer software" provides an interface for importing a list of Pulse Descriptor Words (PDW). This document introduces an electronic measurement solution that simplifies the import and playback of Pulse Descriptor Words, along with a detailed overview of the product's main features. [Contents] ■ Challenges ■ Electronic Measurement Solutions - PDW format files - Real-time playback of pulses defined by PDW - Playback of modulated pulses defined by PDW ■ Main Features ■ Related Items *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S FPC" is a spectrum analyzer that offers performance exceeding expectations at a low price. It is designed in Germany to the same quality standards as high-end equipment. With features such as investment protection, high resolution, and easy control, this product is well-suited for use in university laboratories, research institutions, and manufacturing/services. 【Features】 ■ RF performance designed in Germany ■ Resolution bandwidth settings down to 1 Hz ■ Tracking generator and independent CW signal generator ■ Built-in VSWR bridge ■ 3-year standard warranty *For more details, please refer to the PDF document or feel free to contact us.

• others

Combining the "R&S ZNB Vector Network Analyzer" and the "R&S HF907 Double Ridge Horn Antenna" enables high-speed and accurate TD SVSWR measurements compliant with ANSI C63.25. This document provides detailed information on "Rapid Verification of EMC Test Sites Above 1GHz Using Time Domain SVSWR." [Contents] ■ Challenges - TD SVSWR measurements using VNA - TD SVSWR evaluation ■ Rohde & Schwarz Solutions - TD SVSWR measurement positions in the horizontal plane ■ Extensions ■ Summary ■ References *For more details, please refer to the PDF document or feel free to contact us.

• others

The "R&S AREG100A" is a smart and reliable solution for testing automotive radar sensors during the manufacturing process. For production engineers, it offers the advantages of flexibility in test cases and simple, reliable operation. Additionally, it can incorporate up to four fixed delay lines. The length of the fixed delay lines is specified by the test engineer at the time of order, allowing for high flexibility in test cases and cost optimization for the tester. 【Features】 ■ Reliable and flexible echo generation ■ Simple and stable operation ■ Simple and reproducible interference generation ■ Precise EIRP measurement *For more details, please refer to the PDF document or feel free to contact us.

• others

The acceleration of data rates continues, making the aspects of signal integrity for high-speed digital designs and the components used increasingly challenging. This document introduces "Accurate Measurement of High-Speed Digital Signal Lines with R&S ZNB." [Contents] ■ Challenges ■ Test Solutions ■ Process Automation ■ Eye Diagrams ■ Summary ■ Order Information *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note briefly explains how to analyze EMI issues using the R&S RTO and R&S RTE. The discussion begins by covering the fundamental mechanisms that can cause unwanted RF emissions, followed by an explanation of how to analyze EMI problems. Finally, actual examples are presented to illustrate the analysis process. [Contents] ■ Introduction ■ Basic Principles of Radiated Emissions ■ Measurement Methods Used for EMI Debugging ■ Practical Aspects of EMI Debugging with the R&S RTO Digital Oscilloscope ■ Summary ■ References ■ Order Information *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note introduces "Wideband Millimeter Wave Signal Generation and Analysis." Generating wideband digital modulation signals at V-band and above is a challenging task, typically requiring a set of multiple devices. To simplify the task, we will also consider the analysis part. [Contents] ■ Introduction ■ Setup ■ Test Results ■ References ■ Order Information *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note describes the methods for generating and analyzing wideband digital modulation signals in the millimeter wave band. Rohde & Schwarz measurement instruments and accessories provided by third parties are used for both signal generation and analysis. The measurement results evaluate the performance of millimeter wave signals in terms of EVM, which is a representative performance metric, and adjacent channel power. [Contents (Excerpt)] ■ Introduction ■ Setup ■ Precautions during the setup of millimeter wave signal generation ■ Measurement results ■ Characterization of V-band transmitters *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note introduces the handling and management of coaxial RF connectors. With this guidance, not only can you obtain sufficiently reproducible measurement values using Rohde & Schwarz measurement instruments, but you can also extend the lifespan of the connectors. [Contents] ■ Summary ■ Simple tips for using coaxial connectors ■ Types of coaxial connectors ■ Storage, inspection, cleaning, and handling ■ Appendix: Electrical characteristics of coaxial transmission lines ■ References ■ Additional information *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note covers "Measurement and Conversion of IQ Signals using IQWizard." "IQWizard" is a tool for measuring IQ signals by loading various formats of IQ signal files using Rohde & Schwarz measurement instruments (analyzers). The acquired IQ data in memory can be saved in various formats or transmitted to R&S SMU200A/SMJ100A/SMBV100A/AMU200A using WinIQSIM or WinIQSIM2. [Contents (excerpt)] ■ Overview ■ Software Features ■ Hardware and Software Requirements - Hardware Requirements - Software Requirements ■ Connection between PC and Measurement Instrument, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

Rohde&Schwarz signal generators provide a compact and user-friendly solution for generating phase-coherent signals. By combining generators of different models, it is possible to adapt to user requirements in terms of the number of phase-coherent channels and RF frequency ranges. This application note provides detailed explanations on how to generate phase-coherent signals, considerations to keep in mind, and how to optimally calibrate the relative phase and timing between individual channels. [Contents (excerpt)] ■ Note ■ Introduction ■ Background ■ Correct Equipment ■ Setup Examples, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note describes how to remotely control the R&S SGMA RF signal generators SGT100A and SGS100A via LAN-based FAST Socket or FAST PCI Express (PCIe) connections, with a round-trip setup time of only about 100μs, focusing on high-speed remote control functionality. In addition, it provides an overview of general remote control features, explains the interaction of different SW protocol layers and drivers, and details how to establish a high-speed remote control connection. [Contents (excerpt)] ■ Introduction ■ Remote Control - Interface - Protocol Layers - Remote Connection Setup, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note concisely summarizes basic tips and information regarding SCPI programming for remotely controlling Rohde & Schwarz signal generators. [Contents (excerpt)] ■ Overview ■ 10 Tips ■ Starting the Program ■ Mastering Synchronization ■ Error Queries, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note describes how to connect the Rohde & Schwarz signal generator to a system controller and external PC peripherals (such as USB memory). [Contents (excerpt)] ■ Introduction ■ Overview of features ■ Remote control ■ Remote operation ■ Use of PC peripherals, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note explains how to set up a Rohde & Schwarz network analyzer for spectrum measurement of the object under test. [Contents (excerpt)] ■ Introduction ■ Measurement Setup ■ Spurious Avoidance ■ Software Preselector ■ Optimization of Number of Points and Bandwidth, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note explains noise figure measurements using the R&S ZVA series and R&S ZVT series vector network analyzers. First, the concept of noise figure measurement that does not require a standard noise source is explained. Then, various measurement applications and their corresponding setups and related matters are discussed. Additionally, actual devices are used as examples to introduce the setup of the measuring instruments and the measurement results. [Contents (excerpt)] ■R&S ZVAB-K30 - Noise Figure Measurement - Measurement principles - Definition of noise figure - AVG detector and RMS detector - Calculation of noise power from AVG detector and RMS detector values - System model, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This application note explains high-accuracy measurement techniques for mixers and frequency conversion devices with built-in local signals using the R&S ZVA. The key technology of this measurement method lies in applying a two-tone signal from a network analyzer to the frequency conversion device. By measuring the phase difference of the two signals at the input and output ports, it becomes possible to evaluate the group delay and relative phase between the output and input ports. [Contents (excerpt)] ■ Introduction ■ Technical Background ■ Measurement Method Using Two-Tone Signals - Measurement Setup - Hardware Configuration - Instrument Configuration - Settings to Achieve Low Trace Noise - Calibration, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

The trigger is an important element of an oscilloscope. The trigger captures signals that meet specific conditions, allowing for stable display of repetitive waveforms and enabling detailed analysis. This application note introduces the operating principles of conventional trigger systems and further explains the digital trigger of the R&S RTO oscilloscope, which is designed for real-time operation. [Contents (excerpt)] ■ Principles of conventional trigger systems - Importance of triggers in oscilloscopes - Implementation of conventional trigger systems - Issues related to analog triggers ■ Digital trigger - Concept of digital triggers - Detection of trigger events using digital triggers - Timing determination of trigger points by digital trigger systems, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others