セイホープロダクツ Company Profile

Regarding the "Automatic Stop Function after 10 Years" Automatic stop has been implemented in products manufactured from 2015 onwards. ■ Overview of Inspection Period Notification Function The dedicated controllers and timers for underfloor and attic ventilation fans sold since 2015 are equipped with the safety function mentioned on the left. Starting from November 2025, the automatic stop function will be activated sequentially for products manufactured in 2015. ■ Response Procedure at the Time of Automatic Stop It is expected that customers will contact the sales and installation stores. We ask that sales and installation stores respond according to the following procedures: 1. Conduct a safety inspection based on the "Underfloor and Attic Ventilation Fan Inspection Checklist." * Please ensure to check for looseness and retighten the connections of the controller and timer. If any liquids such as water, oil, or detergent have come into contact, the internal components may corrode, leading to fire hazards; therefore, replacement of the main unit is necessary. 2. If there are no issues, press and hold the set button to restart the operation. ■ Start of Shipment for Controllers/Timers with Inspection Period Notification Function For details regarding the shipment history of timers, please contact our company’s sales representative or quality control department.

We highly recommend that customers who have already installed moisture control materials (such as bamboo charcoal) consider adding a subfloor ventilation fan. We will compare and verify the moisture control effects/performance of using only subfloor moisture control agents (bamboo charcoal) versus using both subfloor moisture control agents and mechanical ventilation through moisture absorption and desorption tests. *The operation time of the ventilation fan is under desorption conditions. By adding a ventilation fan to the subfloor where bamboo charcoal mats are installed, we confirmed improvements in ventilation and airflow effects, leading to enhanced moisture absorption and release efficiency of the bamboo charcoal mats and reduced drying time. Additionally, it is expected that the combined use of the ventilation fan will further improve moisture control performance, leading to a decrease in subfloor humidity and enhanced drying effects on wood moisture content. Please be sure to read the [related materials] and [related links]. ↓ ↓ ↓

This is a report on the inspection results after approximately two and a half years of using the Dry Pro Type-C in the newly added crawl space (foundation packing method) during the renovation. The inspection results showed that there was no dust or other substances adhering to the heat dissipation fins of the dehumidifier, the dehumidifying fins, the intake of the blower, or the fan that could negatively affect performance. Additionally, there were no foreign substances or dust adhering to the drain hose for dehumidified water or the pump tank that could adversely impact performance, and all components were functioning normally. (Photo: Heat dissipation fins of the dehumidifier) The newly added crawl space was located on the north side in a poorly ventilated area, but no signs of mold or condensation were observed, confirming that a dry state was maintained. (Photo: Installation status) Please be sure to read the [related materials] and [related links]. ↓ ↓ ↓