ウシオ電機 List of Products and Services

The "LED Annealing Device" is the third light heating source following halogen heaters and flash lamps. It achieves energy savings through improved heating efficiency and reduces thermal budget with high-speed responsiveness. Real-time temperature measurement using a radiation thermometer is possible. Additionally, it can heat the surface of substrates and demonstrates excellent heating efficiency for metal materials. 【Features】 ■ Improved heating efficiency ■ High-speed responsiveness ■ High-precision temperature measurement ■ High uniformity ■ Capability to heat substrate surfaces *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SUS980 Series" is a flash lamp annealing device that can be used for applications such as crystallization, peeling, and oxide film formation. By controlling the current flowing through the lamp with a semiconductor switch to turn it ON/OFF, the pulse width of the lamp current can be adjusted, allowing for control of the heating depth (0.1 to 60 msec). Multiple flash lamps can be arranged according to the work size for large-area simultaneous irradiation, enabling high irradiation. 【Features】 ■ Depth control (pulse control) ■ ON/OFF control of the current flowing through the lamp using a semiconductor switch ■ Adjustable lamp current pulse width for controlling heating depth (0.1 to 60 msec) ■ Multiple pulse irradiation is also possible ■ High output and large-area simultaneous processing (shortened tact time, high uniformity) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Control Panel for Halogen Heater Units." This is a temperature control system using halogen heaters, featuring high functionality in a compact size. With detailed recipes (sensor switching, control modes), flexible temperature control is also possible. We support everything from experimental research to mass production. 【Simplified Experimental Model Specifications (Excerpt)】 ■ Application: Experiment/Research ■ Connection Method: Standalone ■ Power Control Method: Phase Control ■ Output Adjustment Method: Manual ■ Recipe: None *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Far Infrared Snow Melting Heater Unit" is a product that exhibits high snow melting effectiveness, utilizing a halogen heater as a heat source, which has a high thermal conversion efficiency and enables radiant heating through light (far infrared rays). Since it does not require a complex system, the installation cost is reduced. It can be easily installed in various locations, including existing building walls and balls. Being electrically controlled, it also allows for automation through snow sensors and timers. You can establish a snow melting system with reduced running costs. 【Features】 ■ High-efficiency spot snow melting with light heating ■ Easy installation in various locations ■ Support for low-cost installation ■ Compatible with snow melting automation *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Spot Heater Unit" is a product that combines a high-efficiency reflective mirror and a halogen heater lamp to enhance the directionality of heat rays. It is a compact and lightweight design that can be easily installed anywhere as a spot type. Please feel free to contact us when you need assistance. 【Features】 ■ Combination of high-efficiency reflective mirror and halogen heater lamp ■ Product that enhances the directionality of heat rays ■ Compact and lightweight design ■ Easily installable anywhere ■ Spot type *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Circle Heater Unit" is a product suitable for rapid heating of silicon wafers and pre-heating of glass lenses before molding. The reflector and lamp, designed through 3D reflection light simulation, are appropriately arranged. It has excellent heating uniformity and temperature rise performance. Please feel free to contact us when you need assistance. 【UL-HU-CH36KW/STD Specifications (Excerpt)】 ■ Rated Voltage: 200V ■ Power Consumption: 36kW ■ Unit Outer Diameter: 470mm ■ Unit Depth: 235.5mm ■ Weight: 30kg *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "High Output Line Heater Unit (Custom Made)" is a high-output product that enables light control in high-temperature ranges exceeding 500°C. We select lamps, mirror shapes, and cooling methods tailored to the user's desired temperature, output, and dimensions, providing a completely custom-made solution. We offer mirror shapes including the focus type, parabolic type P, and parabolic type N (compact type with gold-plated mirror specifications). 【Features】 ■ High-output line heater unit that enables light control in high-temperature ranges exceeding 500°C ■ Completely custom-made solutions by selecting lamps, mirror shapes, and cooling methods tailored to specific characteristics ■ Available in focus type, parabolic type P, and parabolic type N ■ Parabolic type can uniformly irradiate a wide area *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Line Heater Unit" combines a heater lamp and a mirror, demonstrating its effectiveness in line heating and heating large areas. By narrowing down the dimensions and characteristics for standardization, it offers high cost performance, making it easy to introduce for prototype verification and experiments. Additionally, it can be customized to meet specific required characteristics. Please feel free to contact us when needed. 【Features】 ■ Combines a heater lamp and a mirror, demonstrating effectiveness in line heating and heating large areas ■ Standardized by narrowing down dimensions and characteristics ■ High cost performance ■ Easy to introduce for prototype verification and experiments ■ Customizable to meet specific required characteristics *For more details, please refer to the PDF document or feel free to contact us.

• others

We will introduce the control methods for infrared halogen heaters. The typical lighting control methods used when turning on halogen heaters are the "phase control method with soft start function" and the "cycle control method with zero-cross function." The "phase control method with soft start function" controls the conduction time (phase angle) for each half cycle of the AC power supply. In the "cycle control method with zero-cross function," the heating amount of the halogen heater is controlled by adjusting the ratio of the on and off periods within a fixed cycle (usually selectable). 【Features of the Phase Control Method with Soft Start Function】 - Controls the conduction time (phase angle) for each half cycle of the AC power supply to regulate the heating amount of the halogen heater. - Allows for gradual voltage adjustment, enabling soft start control. - Minimizes the impact of inrush current. - There is a risk of generating harmonics that may cause surrounding electronic devices to malfunction, so care is needed. *For more details, please refer to the PDF materials or feel free to contact us.

• others

We will introduce the wavelength and lifespan of infrared halogen heaters. The peak wavelength can be calculated using 2897 divided by the color temperature (K), and by changing the color temperature of the halogen heater, it is possible to correspond to various wavelengths. The lifespan is affected not only by filament breakage but also by failures in the seal area. The "halogen cycle" helps to suppress blackening of the bulb wall and prevents filament wear. Compact and long-lasting, these are the characteristics of halogen lamps. 【Features】 ■ The peak wavelength is near-infrared (approximately 1.2μm) ■ The peak wavelength can be calculated using 2897 divided by the color temperature (K) ■ By changing the color temperature of the halogen heater, it can correspond to various wavelengths *For more details, please refer to the PDF document or feel free to contact us.

• others

In special processing of lamps, customization is possible according to the application and purpose, including heat distribution, strength distribution, required wavelengths, and the environment in which they will be used. When changing the spread of light (heat), we can accommodate this with "reflective film coating," "thermal distribution design," and "frosted processing." Additionally, we can change the wavelength of light (heat) with "black coating that emits far infrared radiation," and adapt to the usage environment with "dimple processing that allows for omnidirectional lighting." 【Processing Examples (Excerpt)】 ■ Reflective film coating ■ Thermal distribution design ■ Frosted processing ■ Black coating that emits far infrared radiation ■ Adjusting to the required wavelength *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Straight Tube Double Tube Halogen Heater Lamp QIRT" is a lamp that can directly heat liquids such as water, chemicals, and oils by enhancing airtightness through its double tube structure. Additionally, the double tube structure increases safety by preventing scattering in the event of lamp breakage, making it suitable as a heat source for food heating applications such as fryers. In the custom-made system, it can be designed according to any dimensions, wavelengths, installation conditions, and characteristics. 【Lineup】 ■QIRT100V500W ■QIRT100V700W ■QIRT200V2000W ■QIRT200V2000WL *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the "U-shaped Halogen Heater Lamp" that we handle. In accordance with your heating plan, we can accommodate various shapes and sizes of enclosures, such as U-shape and arc shape, as well as filament design requests. We offer "QIR400V2500WU" and "QIR400V3500WU." Please feel free to contact us when you need them. 【QIR400V2500WU Specifications (Excerpt)】 ■ Rated Voltage: 400V ■ Power Consumption: 2500W ■ Rated Lifespan: 5000h ■ Color Temperature: 2800K ■ Total Length (between contacts): 250mm ■ Tube Diameter: 10Φmm *For more details, please refer to the PDF document or feel free to contact us.

• others

The "QIR Circle Halogen Heater Lamp" is a circular lamp suitable for high-temperature heating devices such as silicon wafer heating systems. It can be utilized when heating in a circular shape or within a circular range is required. Custom designs can be made according to desired sizes and characteristics, and processing for vacuum compatibility is also possible. In the custom-made system, designs can be tailored to any dimensions, wavelengths, installation conditions, and characteristics up to a maximum circle diameter of 500mm. 【Features】 ■ A circular lamp suitable for high-temperature heating devices such as silicon wafer heating systems ■ Can be utilized when heating in a circular shape or within a circular range is required ■ Custom designs can be made according to desired sizes and characteristics, and processing for vacuum compatibility is also possible ■ Designs can be tailored to any dimensions, wavelengths, installation conditions, and characteristics up to a maximum circle diameter of 500mm *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Straight Tube Halogen Heater Lamp QIR" allows for linear heating and can be used in multiple units arranged together to achieve broad area planar heating. It is also suitable as a heat source for heating devices such as glass and building materials. Designs can be tailored to various sizes and characteristics, from short to long lengths. In the custom-made system, it can be designed to any dimensions, wavelengths, installation conditions, and characteristics up to a maximum length of 2200mm. 【Features】 ■ In addition to linear heating, it can be used in multiple units to achieve broad area planar heating. ■ Suitable as a heat source for heating devices such as glass and building materials. ■ Designs can be tailored to various sizes and characteristics, from short to long lengths. ■ Can be designed to any dimensions, wavelengths, installation conditions, and characteristics up to a maximum length of 2200mm. *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the types of infrared halogen heaters and special processing. As a heat source incorporated into heating devices and units, customization is possible according to purpose, application, and usage environment. We offer a variety of heater units that can be selected based on the shape of the heating target and the irradiation range. 【Types of Heater Lamps】 ■ Circular heater lamp ■ Straight tube heater lamp ■ Spot heater lamp ■ Single-end heater lamp *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Infrared Halogen Heater" utilizes its excellent characteristics in various fields, including resin molding, automotive, photovoltaic, and semiconductor industries. It is capable of heating materials such as silicon, glass, steel plates, and carbon fibers. In the resin molding field, the heating targets include PET materials and aspheric lenses, and it is used for preheating molds and molding PET bottles. 【Features】 ■ High-efficiency energy source ■ Quick startup and shutdown ■ High controllability due to being light-based ■ Compact and clean heat source ■ Compatible with various heat distribution patterns and heating speeds *For more details, please refer to the PDF document or feel free to contact us.

• others

The main causes of halogen lamp failure are as follows: (1) Decrease in illuminance due to blackening (2) Filament breakage (3) Coil pitch short due to sag (4) Seal failure Among these, the first three causes of lifespan factors are known to be related to the halogen cycle, but the understanding of these factors has been quite poor. However, recently, measurements of gas phases that contribute to these lifespan factors have been reported using Fourier Transform Infrared (FT-IR) Spectroscopy, and the kinematic model for lifespan has become considerably clearer. [Contents (partial)] ■1. Introduction ■2. Behavior of CO and HBr gases during operation ■3. Oxygen release and lifespan during lamp operation ■4. CO levels and lifespan ■5. HBr levels and lifespan *For more detailed information on this paper, please refer to the related links. Feel free to contact us for more details.

• others

Electromagnetic waves with wavelengths ranging from 10 nm (10×10⁻⁹ m) to 100,000 nm are referred to as "light," and all radiating bodies that emit electromagnetic waves in this wavelength range are called "light sources." When we normally refer to light, we mean visible light, which has wavelengths from 400 nm to 750 nm. Light with shorter wavelengths (10 nm to 400 nm) is called ultraviolet light, while light with longer wavelengths (750 nm to 100,000 nm) is referred to as infrared light. For more information, please see the related links. [Contents (partial)] 1. Light and Halogen Bulbs 2. Halogen Bulbs (HALOGEN LAMP) 3. Features of Halogen Bulbs 4. Composition of Halogen Bulb Varieties 5. Structure of Halogen Bulbs and Names of Each Part *Detailed content of this paper can be viewed through the related links. For more information, please feel free to contact us.

• others

We would like to introduce the "Flash Lamp," which enables high throughput through bulk irradiation of large-area substrates. The light heating provided by this product utilizes the "absorption" characteristic among the material's properties of "reflection," "transmission," and "absorption" to achieve self-heating. Additionally, since it is non-contact, it maintains a clean atmosphere and is not limited by the heating environment, whether in the atmosphere or in a vacuum. 【Features】 ■ Bulk irradiation of large areas - Enables high throughput through bulk irradiation of large-area substrates. ■ High efficiency / energy saving - The wavelength from this product matches the absorption characteristics of Si, allowing for efficient heating. ■ Control of processing depth through pulse control - Minimizes thermal damage to the substrate and allows for heating of only the surface layer. *For more details, please refer to the related links or feel free to contact us.

• others

The "halogen lamp heater" is a high-efficiency lamp-type radiant heating source that converts over 85% of the input power into infrared radiation. Reducing power consumption achieves lower running costs. Using a tungsten filament with a small heat capacity as the heating element allows for rapid temperature rise and fall without contact. Additionally, unlike resistance heating sources that consume power continuously, it can be turned ON when needed and OFF when not, further reducing running costs. 【Features】 ■ High-efficiency energy source ■ Excellent temperature rise and fall performance ■ Light wavelength matched to material absorption characteristics ■ High control performance ■ Compact and clean heat source ■ Long lifespan with consistent energy radiation *For more details, please refer to the related links or feel free to contact us.

• others

Molecules that make up a substance maintain the temperature of the substance itself by continuously repeating vibrations. When a constant light is applied to this motion, the vibrations become larger, and the heat generated increases proportionally. This is known as the "principle of light heating." Heat transfer is physically limited to three types, and light heating falls under "radiative heat transfer." The areas and processes where light heating excels include heat treatment, degassing, reactions, deposition, and drying. 【Three Principles of Heat Transfer】 ■ Conduction - A phenomenon where heat moves based on temperature differences without the transport of energy through the movement or radiation of the substance. ■ Convection - A phenomenon where heat is transferred by the actual flow of a fluid. ■ Radiation - A phenomenon where heat is transferred through thermal radiation and thermal absorption. *For more details, please refer to the related links or feel free to contact us.

• others

The "Flash Lamp Annealing Device" is a light-based heating device that instantaneously anneals objects within one second. Utilizing the light from a xenon flash lamp with a continuous wavelength range from UV to visible and infrared, it allows for variable settings within the range of 0.1 to 60 milliseconds. It can be used for various applications utilizing a wide spectrum, such as sintering, peeling, and surface modification. 【Features】 ■ Spectrum - Wide wavelength characteristics from ultraviolet to visible and infrared regions ■ High output and large area processing (shortened tact time, high uniformity) - Multiple flash lamps can be arranged according to the work size, enabling large area irradiation and high intensity (Max 70J/cm²) irradiation. *For more details, please refer to the PDF document or feel free to contact us.

• others

This catalog features light heating products centered around infrared halogen heaters. We offer a lineup including the straight tube halogen heater lamp "QIR," which can heat a wide area uniformly, and the circle-shaped halogen heater lamp "QIR Circle," suitable for high-temperature heating devices for silicon wafers. Additionally, we also introduce the "Flash Lamp Annealing Device SUS980 Series" and "LED Annealing Device." [Contents (partial)] ■ What is light heating? ■ Infrared halogen heaters ■ Applications of infrared halogen heaters ■ Types and special processing of infrared halogen heaters ■ Straight tube halogen heater lamp QIR *For more details, please refer to the PDF document or feel free to contact us.

• others

This is an introduction to practical examples of Ushio's light sources for light heating (heating/thin film deposition), which has a tradition and a wealth of achievements. 【Features】 ○ Light source used: Halogen lamp heater ○ Optimal as a heat source for CVD and sputtering equipment used in the manufacturing processes of semiconductors, FPDs, and solar cells for the formation of metal films and insulating films. ○ Additionally, by using halogen lamp heaters for moisture removal and preheating before film deposition, it achieves improved throughput and high-quality film formation. ● For other functions and details, please contact us.

• others

This is an introduction to practical examples of Ushio's light sources for light heating (high-speed temperature rise and fall) with a tradition and rich track record. 【Features】 ○ Light source used: Halogen lamp heater ○ With a small heat capacity, it is an excellent heat source for heating characteristics such as high temperature and rapid temperature rise due to radiation light emitted from filaments above 3000K. ○ Used in many processes in the thermal treatment of semiconductors and durable batteries, including oxide film formation, impurity diffusion, silicide formation, and electrode firing. ● For other functions and details, please contact us.

• others

This is an introduction to practical examples of Ushio's light sources for light heating, which have a rich and comprehensive track record (impurity diffusion). 【Features】 ○ Light sources used: Xenon flash lamp, halogen heater lamp ○ In the semiconductor process, implantation is performed on the source drain, followed by an annealing process to activate the doped impurities. ○ Utilizing the characteristics of the xenon flash lamp, it is possible to perform high-temperature annealing in a very short time frame (on the order of milliseconds) to extremely shallow depths (on the order of nm) compared to the previous active layer depth, thereby preventing impurity diffusion. ● For other functions and details, please contact us.

• others

This is an introduction to practical examples of Ushio's light sources for light heating (drying), which has a tradition and a wealth of achievements. 【Features】 ○ Light source used: Halogen lamp heater ○ The non-contact, clean, and rapid heating characteristics of the halogen lamp heater's light heating method are gradually replacing conventional hot air ovens in the drying of products such as metal foils, where dust and dirt are not permitted. ○ Effective for drying solvents, inks, printed materials, and for the drying of painted steel plates in automotive painting applications. ● For other functions and details, please contact us.

• others

This is an introduction to practical examples (joining) of Ushio's light sources for light heating, which has a tradition and a wealth of achievements. 【Features】 ○ Light source used: Halogen lamp heater ○ Halogen heaters are used for pipe welding of various heat sinks ○ The light from the halogen heater is emitted as radiant heat, making it less affected by the surrounding environment compared to hot air types, allowing for rapid heating to the desired temperature ○ Unlike heating with gas burners, it is suitable for reducing CO2 environmental impact ● For other functions and details, please contact us.

• others

This is an introduction to examples of liquid heating and temperature maintenance using light sources from Ushio, a company with a tradition and a wealth of achievements. 【Features】 ○ Capable of maintaining temperature and humidity for pure water and chemical solutions used in the cleaning of silicon wafers in semiconductor manufacturing lines and glass substrates in LCD manufacturing lines. ○ Composed of halogen lamps covered with high-quality quartz glass, resulting in minimal contamination from impurities and the ability to heat efficiently with an efficiency of over 95%. ● For other functions and details, please contact us.

• others

This is a case study of electrode sintering using light sources for light heating from Ushio, a company with tradition and a wealth of achievements. By using halogen heaters, we can perform heat treatment that matches the characteristics of substrates and electrode materials due to the rapid heating capability, heat distribution, and radiation wavelength of halogen heaters. ● For other functions and details, please contact us.

• others

This is a case study of preheating in a film deposition system using light sources for light heating from Ushio, a company with a wealth of experience and achievements. By using halogen lamp heaters that possess non-contact and rapid heating capabilities even in a vacuum environment, we can contribute to reducing takt time in film deposition processes for semiconductors, FPDs, solar cells, and more. ● For other functions and details, please contact us.

• others

This is a case study of RTP using light sources for light heating from Ushio, a company with tradition and a wealth of achievements. In the past, semiconductor thermal processing commonly used furnaces (insulated), but for nano-order devices, thin film formation and shallow junctions are required, making RTP, synonymous with isothermal processes, a key technology. Additionally, in next-generation semiconductors, flash lamp annealing has become the mainstream technology as a thermal flux technique. ● For other functions and details, please contact us.

• others

This is a case study of bathroom drying using Ushio's light source for light heating, which has a tradition and a wealth of achievements. 【Features】 ○ Adoption of halogen heaters in bathroom dryers ○ The light from halogen heaters is emitted as radiant heat, making it less affected by the surrounding environment compared to warm air types, allowing for a warm feeling right after turning on ○ The electrode parts of the heater are designed with a waterproof structure using silicone adhesive, enabling reliable use even in high humidity environments without compromising performance ● For other functions and details, please contact us.

• others

This is an introduction to examples of food warming (heating) using light sources for thermal heating from Ushio, a company with tradition and a wealth of achievements. 【Features】 ○ Halogen lamp heaters emit visible light and infrared radiation, that is, light, when turned on, while also providing thermal radiation. This characteristic is utilized in showcases that serve the dual purpose of warming food. ○ Depending on the amount of energy input, it can be used not only for warming but also as a power source for heating and cooking. ● For other functions and details, please contact us.

• others

Ushio's new energy technology development light source Introduction of practical examples of heating light sources for solar cell manufacturing 【Features】 ○ "Non-contact high-speed temperature rise and fall" using halogen lamp heaters is adopted as a standard heat source in equipment such as firing furnaces, CVD, and sputtering. ○ The long heaters, which have accumulated years of experience in the FPD market and high-precision thermal processing capabilities cultivated in the semiconductor market, are immediately applicable in various solar cell manufacturing processes. ● For other functions and details, please contact us.

• others