エクセリ List of Products and Services

The 3DA-450 (3DA450) is a collinear antenna with a reflective element manufactured by Nippon Antenna, designed for the 400MHz band. *Collinear antennas are high-gain antennas used primarily for radio communication, often employed in the VHF to UHF frequency range. *This antenna is intended for fixed station radios. *The frequency is a specified frequency within the 330-470MHz (UHF band). Please specify fo (center frequency) MHz when placing your order. *The model number varies depending on the operating frequency. - For the 364-450MHz band: 3DA-450 F=364-450 specified - For the 450-470MHz band: 3DA-450 F=450-470 specified *It features a dipole antenna stacked on a stainless steel mast, providing high gain and durability. *It is equipped with a lightning rod. *This antenna has a cardioid radiation pattern. *The cardioid radiation pattern refers to a directional pattern shaped like a heart, where the strongest signal is directed forward. *The gain is 7.15dBi. *The antenna length is approximately 3.79m. *For more details, please feel free to contact our company.

• others

● The GC550 is a 2K mini body camera manufactured by Hytera. ● It is capable of recording high-definition video, audio, and images in 2K resolution. ● This camera can record objective evidence from the field to the courtroom. ● It is IP67 dustproof and waterproof, so rain is not a concern. ● It has a drop resistance of 1.5 meters and is robust. ● With a long-lasting battery, it allows for approximately 9 hours of continuous use at a resolution of 720p. ● Even after the battery is completely drained, it provides an additional 5 minutes of backup power, allowing for battery replacement during recording. ● There are three charging methods: - Charge from a household power supply AC100V using the included Type-C USB cable and AC adapter. - USB charging using the included Type-C USB cable. - Charge from a household power supply AC100V using the separately sold charger EDS31 (10 pockets). ● Recorded data can be transferred to a computer using the included Type-C USB cable. It does not have communication functions. ● The operation is simple with intuitive slide switches and other controls. *For more details, please feel free to contact us.*

• others

●U-BOX AT (UBOXAT) is a remote support wearable device manufactured by Tanizawa (TANIZAWA) that connects the job site and the office. It features a hands-free helmet-mounted camera and voice communication, allowing real-time streaming of the work site conditions to a remote management terminal. ●It is incredibly easy for anyone to use. The worker simply needs to turn on the U-BOX AT unit and the mobile router, while the administrator only needs to enter a specified URL along with a unique username and password. ●It can be used hands-free. ●There are four models available: 1. Web Conference Model 2. Dedicated Cloud Model 3. LAN Model 4. LW Model ●It is well-suited for construction site management, support for new employees, site management, assistance with high-altitude work in power industries or solo operations, maintenance and troubleshooting in manufacturing, and railway track maintenance and vehicle upkeep. ●It consists of a hands-free helmet-mounted camera and a compact communication device that fits in a chest pocket. ●By simply pressing the power button, it automatically connects and starts image streaming, requiring no operation during work. ●The streamed images can be recorded and saved, with recording operations available from both the worker's side and the viewer's side.

• others

● BC39 (BC-39) is a belt clip made by Hytera. ● It is a belt clip for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ● It is a standard accessory for the HP708 body and can be purchased as a spare or replacement. ● The radio can be secured to a belt or similar. ● It slides onto the back of the radio and does not require screws or other fasteners. *For more details, please feel free to contact us.*

• others

The NX-20X (NX20X) is a specific low-power transceiver manufactured by F.R.C Co., Ltd. It is part of the NEXTEC brand. It is a set of two specific low-power transceivers. You can choose from two colors: Black NX-20XBK and Wine Red NX-20XWR. It comes with a charger, lithium-ion battery, and earphone microphone, and can be used without a license or qualification, so you can use it from the day you purchase it. It can communicate with specific low-power transceivers from other manufacturers (excluding group and secret conversations). It features a hands-free (VOX) function. The speaker has a low-frequency output of 0.4W for loud volume, making it clear even in noisy places. It can be used in 20 channels/38 group modes for differentiation. With a thickness of about 19mm and a weight of approximately 100g, it is compact and lightweight. It has a squelch setting. It includes a simple secret conversation function. It can receive FM radio (76.0 to 90.0 MHz). It has a key lock function. It comes with a stopwatch. It complies with the technical standards of the Ministry of Internal Affairs and Communications.

• others

The NX-20BL (NX20BL) is a belt clip manufactured by F.R.C. Co., Ltd. It is a belt clip for the specific low-power transceivers NX-20X and NX-20R made by F.R.C. You can attach the transceiver to your belt or similar items. It is a standard accessory for the NX-20X and NX-20R. You can purchase it as a spare or replacement. It attaches to the back of the transceiver by sliding it on. No screws or other tools are needed for installation. *For more details, please feel free to contact us.*

• others

●OPC-478UD (OPC478UD) is a programming cable made by ICOM. ●If you need a USB driver, please download it from the ICOM website. ●It is used when configuring radios with a computer. ●It can be used with IP transceivers IP502H, IP501H, IP500H, IP510H, and wireless LAN transceivers IP100H/IP100FS/IP1000C. ●It is a successor to OPC-478UC-1.

• others

The K540 (K-540) is a carrier pipe base (foldable) manufactured by Daiwa. It is an antenna base used for mounting antennas on vehicle side mirror pipes, carrier pipes, and railings of apartments or housing complexes. The compatible pipe diameter is Φ15 to Φ25mm. Please use it in combination with separately sold antenna elements. It is designed to match the Super Gainer series, but can also be combined with other antennas. Angle adjustment is possible. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

• others

●PMLN7107 (PMLN7107A) is a 6-unit multi-charger manufactured by Motorola. ●It can charge up to 6 units of the Motorola WAVE PTX IP radio TLK100 at once. ●It can also charge the lithium-ion battery pack PMNN4578 individually. ●It comes with an AC adapter. ●It charges from a household power supply of AC100V. ●It features fast charging. *For more details, please feel free to contact us.*

• others

●FC-AC01 (FCAC01) is a coupling AC adapter manufactured by F.R.C Co., Ltd. ●It is an AC adapter for USB charging. ●Please use it in combination with the separately sold coupling charging cable FC-ZXPROLC. ●It can charge up to four specific low-power transceivers from F.R.C: NX-20X, NX-20R, NT-202M, FC-ZXPRO, and FC-B203 simultaneously. ●It is powered by a household AC supply of 100V.

• others

The NX-20EH (NX20EH) is an ear-hook type earphone microphone manufactured by F.R.C. Co., Ltd. It is an earphone microphone for the specific low-power transceivers NX-20X and NX-20R made by F.R.C. The earphone has an ear hook, so it won't fall off your ear. *The ear hook cannot be detached. You can transmit by pressing the PTT button on the inline part of the cord. The cord has a clip that rotates 360°, allowing it to be attached to clothing and other items. It is compatible with VOX (voice activation) functionality. *For more details, please feel free to contact our company.

• others

● The Aterm MR05LN is an LTE mobile router made by NEC. ● It is a mobile WiFi router that achieves a maximum download speed of 375 Mbps. ● The WAN supports LTE (LTE-Advanced), while the LAN can switch between 11ac/n/a (5GHz band) and 311n/g/b (2.4GHz band). ● The continuous communication time is approximately 14 hours (about 30 hours when using Bluetooth tethering). ● WAN specification value: LTE (LTE-Advanced) has a maximum download speed of 375 Mbps as per device specifications. ● The wireless LAN specification values are 867 Mbps for the 5GHz band and 300 Mbps for the 2.4GHz band, which can be used interchangeably. ● It can be used for communication with the Tanizawa remote support wearable camera U-BOX AT and the real-time information sharing system U-BOX WITH. Compatible wireless devices are ST#7704 and ST#7704 (DE200). ● When using Tanizawa products, there will be a monthly communication fee billed by Tanizawa for the use of the SIM card: - 500GB: 5,500 yen (excluding tax) - 1TB per unit: 6,500 yen (excluding tax)

• others

The DJ-X82 (DJX82) is a communication receiver with a keypad manufactured by Alinco. It is an easy-to-use receiver for beginners, equipped with a keypad. The charging and external power terminal is USB TYPE-C, allowing for USB charging. It features "Quick Memory" and "Quick Search Pass" banks with 200 channels each. With simple operations using the dial, you can skip noise while searching and temporarily store found signals, making it easy to move them to the conventional bank. It also includes a selectable sound & silent simple bug detection mode. A free editing software that allows memory registration and set mode configuration (available for download from the Alinco website) can be connected to a PC using the included USB cable for settings. It can receive AM/FM and FM broadcasts from 76-108 MHz through a separate circuit. You can register the conditions for program scanning by pairs, allowing you to search the same band with different steps and modes. *For more details, please refer to the PDF document or feel free to contact us.

• others

●ESC-68 (ESC68) is a soft case made by Alinco. ●It is a soft case specifically designed for the communication receiver (receiver) DJ-X82 with a keypad. ●It protects the receiver from scratches and dirt. *For more details, please feel free to contact our company.*

• others

● RSB-BA5-MJ (RSBBA5MJ) is a roof side base made by Nippon Antenna. ● It is a base used for installing antenna equipment for mobile radios on the roof side of a vehicle. ● Please use it in combination with separately sold antenna elements (with M-P connectors) such as HGB-150-2-09EL and GB-060L-2-09EL. ● It comes with the following connectors: - Antenna connection side connector: M-J connector - Radio connection side: It has an attachment connector, and you can choose between M-P or N-P connectors depending on the radio used. ● A 5m coaxial cable (5D-2V) is included. ● The installation method is gutter mounting. *For more details, please feel free to contact us.

• others

● K515 (K-515) is a roof rail dedicated base (mid-size base) manufactured by Daiwa (Diamond) with a variable mounting width. ● It is an antenna base used for mounting the antenna of a vehicle-mounted radio on the car's roof rail. It can be installed on various car roof rails. ● Please use it in combination with separately sold antenna elements. ● Compatible pipe diameter is Φ8 to Φ32mm. ● It is compatible with rails that are 50mm or less in height and 48mm or less in width. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

• others

●EDC-197A (EDC197A) is a standard charger set manufactured by Alinco. ●It charges Alinco receivers DJ-X82 and DJ-X81. ●It is a standard configuration item for the DJ-X81 main unit. ●The AC adapter EDC-139 is included. ●It charges from a household power supply of AC100V. ●The charging time is approximately 10 hours to fully charge the dedicated nickel-metal hydride battery EBP-179. *For more details, please feel free to contact our company.

• others

●OPC-2401 (OPC-2401#11) is a headset adapter cable made by ICOM. ●It is an adapter used to connect a headset to the VHF airband transceivers IC-A16 and IC-A16E. ●It features an LWP connector.

• others

The VB400-EXT-CHARGE (VB400EXTCHARGE) is a charging cable for the VB400 made by Motorola. It allows for simultaneous charging and configuration of the Motorola Body Camera (BWC) VB400, as well as transferring video to the VB400 management software VideoManager. It serves as a lightweight alternative to the VB400 single-port dock. The power side connector is USB Type-A, and the cable length is 2 meters.

• others

The FC-ZXPROLC (FCZXPROLC) is a connection charging cable manufactured by F.R.C. Co., Ltd. By combining it with the separately sold AC adapter FC-AC01, you can simultaneously charge up to four specific low-power transceivers made by F.R.C., including NX-20X, NX-20R, NT-202M, FC-ZXPRO, and FC-B203. It is a 4-way micro USB charging cable. The cable length is approximately 1.2 meters.

• others

● The NX-20BC (NX20BC) is a charger manufactured by F.R.C Corporation. ● It can charge the specific low-power transceivers NX-20X and NX-20R made by F.R.C. ● It comes with two terminals for connecting to the transceiver body. ● It can charge two units simultaneously. ● It can be charged from a household power supply of AC100V. ● The charging time is approximately 3.5 hours. *For more details, please feel free to contact our company.*

• others

The NX-20BT (NX20BT) is a lithium-ion rechargeable battery manufactured by F.R.C Co., Ltd. It is the rechargeable battery for the specific low-power transceivers NX-20X / NX-20R / FC-S22 and the disaster prevention radio NX-W109RD. The battery capacity is 1000mAh. It is charged using the charger NX-20BC while installed in the transceiver, or with the connecting AC adapter FC-ZXPROLC and the connecting AC adapter FC-AC01. The battery life is approximately 24 hours when used with the NX-20X. This is an estimated time based on using the fully charged battery with a low-frequency output rating of 400mW, transmitting for 10 seconds, receiving for 10 seconds, and waiting for 80 seconds in a repeating cycle. The charging time is approximately 3.5 hours. For more details, please feel free to contact us.

• others

The NX-20R (NX20R) is a specific low-power transceiver manufactured by F.R.C. It is part of the NEXTEC brand. It comes as an all-in-one package that includes a charger and battery, allowing immediate use upon purchase. By using the separately sold radio repeater FC-R3, you can double the communication range (theoretical value). It has 38 channels, allowing for use in 38 group modes. The VOX (hands-free) function is available. It features a dual watch function that allows standby on two channels. If communication occurs on either channel, you can talk on that channel. After the conversation ends, it returns to dual watch mode. It is a legitimate product that conforms to the technical standards of the Ministry of Internal Affairs and Communications. It supports full channels for normal communication (20 channels) and repeater communication (27 channels). It can communicate with other manufacturers' specific low-power transceivers, including 9ch, 11ch, and 20ch models. It can receive FM radio (76.0 to 90.0 MHz).

• others

The SX20C (SX-20C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radio equipment. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and SWR at the intersection of both. The frequency range is 3.5 to 30 MHz, 50 to 54 MHz, and 130 to 150 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

• others

The SX40C (SX-40C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radio equipment. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and to read SWR at the intersection of both. The frequency range is 144 to 470 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

• others

The SX240C (SX-240C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It has two built-in sensors for the frequency ranges of 1.8 to 54 MHz and 140 to 470 MHz. It is a measuring instrument for radios. This cross-type power meter is designed with two sets of meters to read forward power, reflected power, and SWR at the intersection of both. With the use of two sensors, it can measure a wide range from HF to UHF bands. It features illumination for better visibility. The connector is MJ. *For more details, please feel free to contact our company.

• others

● The AP-76M (AP76M) is a wireless access point manufactured by Icom. ● It is a lightweight wireless access point that complies with Wi-Fi 6 and achieves high-speed communication of 1.2Gbps. ● It has obtained technical compliance certification. ● Compliant with Wi-Fi 6 (IEEE802.11ax), it enables ultra-fast and stable data communication with a theoretical communication speed of 1.2Gbps. ● It supports the robust security standard WPA3 Personal. *Note: This is the conventional WPA2 standard. ● Beamforming/OFDMA features Equipped with beamforming technology that directs radio waves towards the direction of the device, ensuring stable communication. It also has OFDMA functionality, allowing simultaneous transmission to multiple devices rather than just one. This enables comfortable communication even with many devices connected at the same time. *For more details, please refer to the PDF document or feel free to contact us.

• others

The SX27P (SX-27P) is a compact SWR and power meter manufactured by Daiwa (Diamond Antenna) for the 144/430MHz band. It is a measuring instrument for radios. It can read power and SWR. The frequency range is 140 to 150MHz / 430 to 450MHz. The connector is MJ. It is small and lightweight, making it convenient to carry. *For more details, please feel free to contact our company.*

• others

The WL-AC1000 (WLAC1000) is a photocatalytic sterilization and deodorization device called fresair, manufactured by JVC Kenwood. It features the patented ALMION filter technology, which rapidly decomposes odors. *This is a patented technology of APS Japan Co., Ltd. *The ALMION filter has a self-cleaning effect, making maintenance easy and cost-effective. *The ALMION filter uses photocatalytic action to convert invisible viruses, bacteria, and odors in the air into water and carbon dioxide. It can cover an area of up to 25 tatami mats, circulating the air in about 60 minutes for 25 tatami mats and about 19 minutes for 8 tatami mats. It is a high-performance model specialized for sterilization and deodorization. With a compact size of 8 cm in depth, it can be installed anywhere. The included remote control makes it easy to operate from a distance. It operates on a household power supply of AC 100V. *For more details, please feel free to contact us.

• others

●AN0435H25 (AN-0435H-25) is an antenna manufactured by Hytera. ●It is an antenna for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is a standard component of the HP708 main unit and can be purchased as a spare or replacement. ●The antenna length is 9 cm. ●The antenna connector is SMA-J. ●It is compatible with GPS/Glonass. ●It supports frequencies of 400–470 MHz / 1575 MHz. ●It complies with the European environmental regulation RoHS. *For more details, please feel free to contact us.*

• others

●B-RFXM (BRFXM) is the VoiSniper voice sniper RFXM made by Bear (B-EAR). ●It is designed to be used with Bear's simultaneous communication type specific low-power transceivers: BRIDGECOM X5 (BM-X5), BRIDGECOM X10 (BM-X10), BRIDGECOM X10 Compact (BM-X10CP), and BRIDGECOM X10 Athlete (BM-X10AT). ●It is a dual-head plug voice sniper that can be used for both left and right. ●The ear hook is designed to be easy to wear and difficult to fall off. ●It is sweat-resistant, so you can use it with confidence even if you sweat. ●The microphone located near the mouth is an omnidirectional microphone, which picks up sound from any angle. ●It comes with a windscreen sponge to reduce wind noise. ●It includes a clip to secure the cord at the chest. ●By attaching the included ear silicone mold BM-ESM or the ear silicone mold light BM-ESL to canal-type earphones, it can be fixed in the ear groove. This makes it less likely to cause ear pain during long-term use and prevents it from falling out during use. ●It is ideal for situations where you want to use a radio hands-free, such as in construction or work sites.

• others

●LCY026 (LCY-026) is a carrying case made by Hytera. ●It is a protective case for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is explosion-proof. ●It protects the HP708 from dirt and impact. ●It is made of high-quality black leather. ●It is compatible with radios that have a display. ●It can be worn while using an earpiece. *For more details, please feel free to contact us.*

• others

● The BP-245H (BP245H) is a lithium-ion battery pack manufactured by Icom. ● The manufacturer part number is BP-245H#13. ● It is a rechargeable battery for the Icom international VHF transceivers IC-M72J and IC-M73J. ● It can be easily attached with a sliding mechanism. ● When attached to the transceiver, it demonstrates IPX8 waterproof performance, allowing it to be used without issues at sea. ● The charging time is approximately 2.5 hours when using the desktop charger BC-210. *For more details, please feel free to contact us.*

• others

●MCL32 (MCL-32) is a six-slot charger manufactured by Hytera. ●It is a six-slot charger for the HP708 portable radio, which complies with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It can charge up to six batteries simultaneously, whether they are attached to the radio (such as the explosion-proof lithium-ion battery BL2801-Ex) or standalone. ●It can charge lithium-ion and lithium-polymer batteries. ●It comes with a dedicated AC adapter. ●It can be installed on a wall or desktop. A separately sold bracket (BRK20) is required for wall mounting. *For more details, please feel free to contact us.*

• others

●BL2801-Ex (BL2801Ex) is an explosion-proof lithium-ion battery manufactured by Hytera. ●It is a lithium-ion battery for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It can operate the HP708 for approximately 25 hours at maximum. ●It complies with the explosion-proof ib 2B Ex standards. ●It is a standard component of the HP708 main unit and can be purchased as a replacement or spare. ●It can be charged with the rapid charger CH10L27 + AC adapter PS1027 or the six-bay charger MCL32. *For more details, please feel free to contact us.

• others

The EHS27-Ex (EHS27Ex) is an explosion-proof earphone microphone made by Hytera. It is a tie-pin microphone + earphone for the rugged UL explosion-proof commercial smart device PNC460U. *Please note that it is for UL explosion-proof use and is not compatible with the non-explosion-proof PNC460. *It is UL explosion-proof compliant. *For more details, please feel free to contact us.

• others

The WX-CT200 (WXCT200) is a portable transceiver manufactured by Panasonic. It is the main unit of a 1.9GHz digital wireless intercom system compliant with J-DECT standards. It can be used with up to 100 units. The main unit can be hung around the neck with the included strap, and calls are made using the built-in microphone and earphones. The calling method is press-to-talk (communication is possible while the talk button is pressed). Additionally, you can connect a separately sold talk microphone (with earphones) WX-CM210 to communicate in a lapel microphone format. The calling methods include press-to-talk (communication is possible while the talk button is pressed) and talk lock (communication is possible by pressing the talk button for more than one second, and communication ends by pressing the button for more than one second again). It supports all-call (simultaneous communication with up to 6 units), group calls (simultaneous communication with up to 3 units), and hierarchical group calls. Group operation settings and changes can be easily made with the free "Operation Support Software." It has a lightweight design of 56g. With a wide frequency range of 100Hz to 8kHz and Panasonic's proprietary DNR (Digital Noise Reduction) technology, it reduces surrounding noise and provides clear sound quality.

• others

● The WX-CM210 (WXCM210) is a talk microphone made by Panasonic. ● Earphones (3.5φ) are also included. The earphones come with three sizes of ear tips (large, medium, small). ● This is an earphone microphone for the portable transceiver WX-CT200. ● It connects to the WX-CT200 using the included transceiver connection cable. The connection cable has a coiled section, making it less likely to break if snagged. ● The microphone is a bidirectional electret microphone. ● There is a clip on the back of the microphone that allows it to be attached to clothing. ● The microphone itself is compact and lightweight, weighing about 17g (approximately 20g including the windscreen), making it comfortable to wear. ● A windscreen is also included to prevent wind noise. *For more details, please feel free to contact us.*

• others

The WX-CR200 (WXCR200) is an antenna station manufactured by Panasonic. It is an antenna unit for the Panasonic J-DECT compliant 1.9GHz band digital wireless intercom system (multi-party simultaneous communication intercom). Up to 100 portable transceiver units WX-CT200 can be wirelessly connected to a single antenna station. It can be installed on the ceiling or wall and wired to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CR200 can be up to 200 meters. A single center unit WX-CX200 can connect up to 12 antenna stations. It comes with two omnidirectional antennas (external). The reception method is diversity reception.

• others

The WX-SB100 (WXSB100) is a rechargeable battery pack made by Panasonic. It is a lithium-ion battery for the portable transceiver WX-CT200 and wireless microphones WX-ST100 and WX-ST300. The battery capacity is 3.7V DC / 700mAh. It can operate the WX-CT200 for approximately 15 hours, based on a usage ratio of transmission: reception: standby = 1:1:8. It can be charged with the separately sold charger WX-Z3040A, with a maximum charging time of 4 hours. For more details, please feel free to contact us.

• others

● The WX-CM200 (WXCM200) is a center microphone manufactured by Panasonic. ● It is a center microphone for the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). ● It connects to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CM200 is up to 50m. ● By connecting to the center unit WX-CX200, two-way communication with the portable transceiver WX-CT200 is possible. Individual calls can also be made. ● An amplifier-equipped speaker can be connected for audio confirmation. ● The power supply is DC24V, provided from the center unit WX-CX200. *For more details, please feel free to contact us.*

• others

● The WX-CZ200 (WXCZ200) is a charger (non-contact charging method) made by Panasonic (PANASONIC). ● The WX-CZ200 is a charger for the separately sold portable transceiver WX-CT200. ● It can charge up to 5 portable transceivers WX-CT200 and 2 separately sold battery packs WX-SB100 simultaneously using non-contact charging. ● The battery pack can also be charged individually. ● The charging time is approximately 4 hours at maximum. ● It uses a non-contact charging method. ● A dedicated AC adapter is included. It can be charged from a household power supply of AC100V. *For more details, please feel free to contact us.

• others

The AR-CT200K (ARCT200K) / AR-CT200B (ARCT200B) is a dedicated case for portable transceivers manufactured by Artex Co., Ltd. (with a belt buckle). The AR-CT200K is black, while the AR-CT200B is brown. It is a recommended case for the Panasonic portable transceiver WX-CT200. The back of the case has a belt clip, allowing it to be attached to a belt or similar items. It protects the transceiver from scratches and dirt. *For more details, please feel free to contact us.*

• others

●MBZ-2 (MBZ2) is a dustproof unit for the ICOM IP50G. ●By attaching it to the IP gateway IP50G, it protects the terminal and achieves a dustproof performance of IP5X. It can be safely used in outdoor environments or areas with dust. *It has been tested by leaving it in a dust environment with a concentration of 2 kg of test dust per cubic meter for 8 hours, after which it was retrieved and continued to function. ●When combined with the separately sold MB-89, it can be securely fixed to a mast. *For more details, please feel free to contact us.

• others

The WX-CX200 (WXCX200) is a center unit manufactured by Panasonic. It serves as the core device of the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). It is ideal for staff communication in stores, parlors, and halls. It controls the operation of the portable transceiver WX-CT200. Through the separately sold antenna station WX-CR200, it enables two-way communication between the separately sold portable transceiver WX-CT200 and two-way communication with the separately sold center microphone WX-CM200. It is suitable for system construction from small to large scale. Up to 12 antenna stations can be connected to a single center unit, and up to 100 WX-CT200 handsets can be connected to a single antenna station. However, the maximum number of handsets that can be connected per system is 100. *For more details, please feel free to contact us.

• others