エクセリ List of Products and Services

The "CSA824C" is a rapid charger manufactured by STANDARD. It can charge simultaneous communication type specific low power transceivers made by STANDARD and wave CSR (formerly Lecuo STANDARD). It can be charged in both states: with the battery alone or with the transceiver equipped. *When charging while attached to the radio, please make sure to turn off the power. The approximate charging time is as follows: - Lithium-ion battery pack CNB840: about 3 hours There is an LED lamp that indicates the battery charging status, making it easy to understand the situation. 【Features】 ■ Charger stand and AC adapter set product ■ Easy to grasp the charging status ■ Fully charged in about 3 hours ■ Can be powered from a household AC 100V source 【Compatible Models】 Multi-person simultaneous communication wireless system - HX824 - HX834 - HX835P - P9010

• others

The "BM-DAC20" is a dedicated charger for 20 units made by B-EAR (Bear) (without case). It can charge B-EAR's multi-audio guide system and radio receivers. It can charge 20 radios simultaneously. Being a stationary type without a case, it is more compact in size and easier to install compared to case-type chargers. It comes with a dedicated AC adapter, BM-AC240, which allows it to be powered from a standard household AC 100V outlet. *Please ensure to turn off the power when charging the radios. The full charge time is approximately 3 hours. 【Features】 ■ Can charge up to 20 units simultaneously ■ More compact size than case-type chargers ■ Can be powered from a household AC 100V outlet ■ Fully charged in about 3 hours 【Compatible Models】 Wireless Guide System - BM-GSR - BRIDGECOM GS-T Low Power Transceiver - BRIDGECOM R2

• others

The 『EH-M01』 is a keypad speaker microphone manufactured by Smart Wave Telecommunications. It can be used with the Smart Wave IP radio SV-1000 and the MCA Advance radio TEF-6T705A from Tom Communication Industry. You can select group communication, individual communication, and broadcast communication using the keypad. It features a voice recording function that allows recording during calls and recording to the other station for up to 120 seconds. It also has an individual calling function. The key layout allows for easy operation without having to manipulate the radio itself. The coiled cable is designed to be tangle-resistant and less prone to breakage, making it safe to use in tough environments such as construction sites and manufacturing plants. You can attach commercially available 3.5mm mono earphones to output the received audio through the earphones instead of the microphone. 【Compatible Models】 IP Radio - SV-1000 MCA Advance Radio - TEF-6T705A 【Features】 ■ Ability to specify the other station and make calls using the keypad ■ Tangle-resistant coiled cable ■ One-handed operation possible ■ Message editing available via the keypad

• others

The 『SK-M01』 is a speaker microphone manufactured by Smart Wave Telecommunications. It can be used with IP radios and digital simple radios from Smart Wave Telecommunications and Icom. It features a large PTT button that is easy to press even when wearing gloves or work gloves. This is a compact, one-handed operable speaker microphone for professional use. It uses a flexible coiled cable that is resistant to tangling and breakage. It comes standard with a clip that can be attached to your chest. It has a 3.5mm earphone jack, allowing you to connect separately sold earphones (3.5mm). The connector is an L-shaped 2-pin jack. 【Compatible Models】 IP Radios - C350-CWB - IP200H - IP500H - IP501H - IP502H - SK-3000 - Handy Cosmotalk C250TR Digital Low Power Community Radio - IC-DRC1 - IC-DRC1MK2 WLAN Transceiver - IP100H

• others

The "SK-M04" is a waterproof speaker microphone manufactured by Smart Wave Telecommunications. It can be used with IP radios and digital simple radios from Smart Wave and Icom. It features a large PTT button that is easy to press even when wearing gloves or work gloves. This compact speaker microphone is designed for one-handed operation. It uses a stretchable coiled cable that is resistant to tangling and breakage. With an IP67 rating for waterproof and dustproof capabilities, it can be safely used in heavy rain or dusty environments. It comes with a back clip for the speaker microphone, allowing it to be attached to clothing and other items. 【Compatible Models】 IP Radios - C350-CWB - IP200H - IP500H - IP501H - IP502H - SK-3000 - Handy Cosmotalk C250TR Digital Low-Power Community Radios - IC-DRC1 - IC-DRC1MK2 WLAN Transceiver - IP100H

• others

The "SK-M51" is a compact speaker microphone manufactured by Smart Wave Telecommunications. It can be used with Smart Wave's IP radios. With a compact size that fits in the palm of your hand, it is easy to grip and use, allowing for one-handed operation, making it suitable for professional use. It features a large PTT button that is easy to press even when wearing gloves or work gloves. It is equipped with a flexible coiled cable that is resistant to tangling and breakage. You can transmit by pressing the button on the side of the speaker microphone. It comes with a back clip that allows it to be attached to clothing. 【Compatible Models】 IP Radios - SK-5000 【Features】 - One-handed operation possible - Tangle-resistant coiled cord - Can be attached to the chest

• others

The SK-M52 is a waterproof speaker microphone manufactured by Smart Wave Telecommunications. It can be used with Smart Wave's IP radios. It is designed to be waterproof and has resistance to everyday levels of water exposure. You can transmit by pressing the button on the side of the speaker microphone. It features a large PTT button that is easy to press even when wearing gloves or work gloves. A stretchable coiled cable that is less prone to tangling and disconnection is used. It is equipped with a headphone jack. You can also use it with the separately sold SK-E51 earphones designed for the SK-M52. The speaker microphone has a clip on the back, allowing it to be attached to clothing. 【Compatible Models】 IP Radios - SK-5000 【Features】 ■ One-handed operation possible ■ Coiled cord that is less prone to disconnection ■ Can be attached to the chest ■ Waterproof design for everyday use

• others

The "SK-P51" is a battery pack S manufactured by Smart Wave Telecommunications. It is a rechargeable battery that can be used in combination with the IP radio SK-5000 made by Smart Wave Telecommunications. Weighing 85g, it is a lightweight type that is not burdensome. With an IP68 dustproof and waterproof structure, it can be used with confidence even in harsh environments. The battery capacity is 1200mAh, and the battery life is approximately 7 hours. No mounting screws are required, as it can be attached by sliding onto the main body of the radio. It can be charged both while attached to the radio and as a standalone battery. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Operating time of approximately 7 hours ■ IP68 dustproof and waterproof structure ■ Can be charged as a standalone unit ■ Battery capacity of 1200mAh For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The 『SK-P52』 is a battery pack M manufactured by Smart Wave Telecommunications. It is a rechargeable battery that can be used in combination with the IP radio SK-5000 made by Smart Wave Telecommunications. Weighing 115g, it is a lightweight type that is not burdensome. With an IP68 dustproof and waterproof structure, it can be safely used in harsh environments. The battery capacity is 1900mAh, and the battery life is approximately 12 hours. No installation screws are required, as it can be attached by sliding onto the main body of the radio. It can be charged while attached to the radio or as a standalone battery. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Operating time of approximately 12 hours ■ IP68 dustproof and waterproof structure ■ Can be charged as a standalone unit ■ Battery capacity of 1900mAh For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The SK-P53 is a battery pack L manufactured by Smart Wave Telecommunications. It is a rechargeable battery that can be used in combination with the IP radio SK-5000 made by Smart Wave Telecommunications. Weighing 145g, it is a lightweight type that is not burdensome. With an IP68 dustproof and waterproof structure, it can be safely used in harsh environments. The battery capacity is 3350mAh, and the battery life is approximately 20 hours. No installation screws are required, as it can be attached by sliding it onto the main body of the radio. It can be charged both while attached to the radio and as a standalone battery. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Operating time of approximately 20 hours ■ IP68 dustproof and waterproof structure ■ Can be charged as a standalone unit ■ Battery capacity of 3350mAh For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The 『SK-P54』 is a single charger manufactured by Smart Wave Telecommunications. When combined with the separately sold AC adapter for the charger, SK-P55, it can be used to charge the battery packs of Smart Wave Telecommunications' IP radios. You can charge the battery either on its own or while it is attached to the radio body, in either state. Estimated charging times: - Battery pack SSK-P51: approximately 2 hours - Battery pack MSK-P52: approximately 2.5 hours - Battery pack LSK-P53: approximately 4 hours The charging status of the battery pack can be easily understood by the color of the LED lamp: - Red: Charging - Green: Charging complete *Please do not charge batteries other than the specified battery packs, as this may cause accidents or malfunctions. *This product cannot be connected for charging. If you wish to charge multiple batteries at once, you can purchase the dual connection charger SK-P57. 【Compatible Models】 IP Radio - SK-5000

• others

The 『SK-P56』 is a battery case manufactured by Smart Wave Telecommunications. *Please note that AA alkaline batteries are not included. It can be used in combination with the IP radio SK-5000 from Smart Wave Telecommunications. You can operate the radio even when power cannot be secured during emergencies such as disasters. It can be powered by six AA alkaline batteries. The battery life is approximately 4 hours, providing sufficient operational time. *The battery life is an estimate based on a communication ratio of 1:1:18 for transmission, reception, and standby. No installation screws are required, and it can be attached by sliding onto the main unit of the radio. *Please note that the battery level indicator on the main unit of the radio will not function when using this product. *When not in use, please remove the alkaline batteries from the battery case for storage. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Can be attached without installation screws ■ Operable with AA alkaline batteries ■ Maximum operational time of approximately 4 hours

• others

The SK-P57 is a dual charging station manufactured by Smart Wave Telecommunications. It is a dual charging station that can charge the Smart Wave Telecommunications IP radio SK-5000. You can connect up to three units to charge six radios simultaneously, and it can be charged with just one AC adapter. The charging status of the battery pack can be easily understood by the color of the LED indicator lights: - Red: Charging - Green: Charging complete It can be powered from a household AC 100V outlet. The battery can be charged whether it is standalone or attached to the radio. *AC adapter is not included. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Can charge up to six units simultaneously ■ Can be powered from a household AC 100V outlet ■ Charging status can be checked with LED indicators ■ Can charge the battery standalone For extremely low prices on earphone microphones and batteries, please leave it to Exceli. *For more details, please feel free to contact us.

• others

The SK-P59 is a vehicle-mounted charger manufactured by Smart Wave Telecommunications. It can charge the IP radio SK-5000 equipped with battery packs SK-P51 or SK-P52 using the car's cigarette socket. It is compatible with DC12/24V vehicles. The straight cable is convenient for handling, with a length of 180 cm. The charging times are as follows: - SK-P51: approximately 2 hours - SK-P52: approximately 3 hours *If your vehicle does not have a cigarette socket, please use it in combination with the cigarette socket SK-P61. 【Features】 - Compatible with DC12/24V vehicles - Convenient straight cable - Blue LED lights up during operation - Cable length is approximately 1.8m For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The DR-PM300SEFL (DRPM300SEFL) is a specific low-power transceiver manufactured by Alinco for mobile and base station use. No license, qualifications, or applications are required, and there are no call charges or radio usage fees. It is limited to 200 units for sale. The DR-PM300SE has removed the simultaneous communication function, the included microphone has been changed to EMS-61, and a cigarette cable EDC-341 is included. The power supply automatically supports DC12V/24V, allowing for direct installation in vehicles. It can be used as a base station for specific low-power transceivers or as a mobile radio. To prevent gain loss from coaxial cables, the transceiver is built into the antenna section. It is an all-in-one package that includes the antenna and radio section, control unit, hand microphone, DC cable, and mobile bracket, allowing for immediate use from the day of purchase. The radio consists of the following two-unit configuration: antenna & radio section (silver part) and control unit (mobile radio type) along with the microphone. Additionally, it is possible to separate and use only the front panel from the control unit.

• others

The DR-PM300SE is a specific low-power transceiver manufactured by Alinco for mobile and base station use. No licenses, qualifications, or applications are required, and there are no call charges or radio usage fees. There are three call modes available. It adopts all call modes supported by Alinco's specific low-power transceivers: - Simultaneous call mode: Between 2, 3, or 4 parties - Interleaved call mode: Direct transmission and reception for normal interleaved calls - Relay call mode: Supports both single transmission relay and connected relay * The DR-PM300SE itself does not function as a relay device and can only be used as a sub-unit. * Wireless connected relay is only supported during interleaved calls. It comes as an all-in-one package including the radio unit with antenna, operation unit, microphone, DC cable, and mobile bracket, so it can be used right from the day of purchase. This radio is suitable for business communications in heavy machinery and other applications. Of course, it automatically supports DC 12V and 24V power, allowing for direct installation in cranes and large vehicles. 【Features】 ■ No licenses, qualifications, or applications required ■ Simultaneous calls possible for up to 4 people ■ Built-in speaker with a loud volume of 2W ■ Equipped with Bluetooth functionality

• others

The EMS-924 is a stand microphone (with windscreen) made by Alinco. It is a microphone for the Alinco DR-PM300SE specific low-power transceiver for mobile and base stations. This is the same product as the standard components of the DR-PM300SE. Please use it as a replacement or spare. The microphone is a directional type, making it less likely to pick up surrounding noise during transmission, and the windscreen helps reduce wind noise during transmission. It is also easier to use outdoors. The microphone arm is a flexible type that can bend easily. It features a PTT lock to maintain the transmission state. There is also a MIC switch that allows you to turn off the microphone while keeping the transmission state. It has a 7-level microphone gain adjustment to increase or decrease the sound. You can make the sound louder, reduce distortion, and decrease feedback. *Microphone gain refers to determining the volume level at which sound picked up by the microphone is input, or the sound pressure level for input. The bottom part has an easily detachable magnetic base. 【Compatible Models】 Specific low-power transceiver for mobile and base stations ・DR-PM300SE

• others

The EMS-61 is a dynamic microphone made by Alinco. * The EMS-61 does not have a speaker function. It can be used with Alinco's vehicle-mounted digital simple radios and more. It is easy to grip and features a channel switch on the microphone unit, allowing for simple up-and-down operation to change channels. It comes with a channel switch lock function. The coiled cable is designed to be tangle-resistant and less prone to breakage, making it safe to use in tough environments such as construction sites and manufacturing plants. While it can be used with most Alinco vehicle-mounted radios starting with the model number DR, please note that sound quality may vary significantly, and microphone gain adjustment may be necessary. In addition to the compatible models listed below, it is also a standard component for DR-620, DR-635, DR-120, DR-420X, DR-M03, and DR-M06. 【Compatible Models】 Digital Simple Radio Registered Station - DR-DPM60 - DR-DPM61 Digital Simple Radio Licensed Station - DR-BU60D Specific Low Power Transceiver - DR-PM300SE

• others

The "DM-305MV" is a linear (transformer-type) stabilized power supply manufactured by Alinco. It can convert and adjust household power from AC100V to DC6V-15V. When using a mobile radio as a base station, it can draw power from a household outlet of AC100V. It is equipped with a heat sink suitable for heat dissipation and absorption, preventing the main unit from becoming excessively hot. Power can be easily supplied by simply plugging in the AC adapter. *Please note that it cannot be used for chemical experiments, devices using compressors or motors, or battery charging. *When connecting this product, please ensure that the power is turned OFF. 【Compatible Models】 Digital Simple Radio Licensed Station - DJ-BU50AD - DR-BU60D Digital Simple Radio Registered Station - DR-DP50M - DR-DPM50 - DR-DPM60 - DR-DPM61 Specific Low Power Transceiver - DR-PM300SE Receiver - DR-XF7 - DR-XF7

• others

The MP16 is a high-volume speaker microphone manufactured by Smart Wave Telecommunications. It can be used with IP radios and digital simple radios from Smart Wave and Icom. It features a large PTT button that is easy to press even when wearing gloves or work gloves. It uses a flexible coiled cable that is resistant to tangling and breakage. It comes with wind noise reduction functionality, eliminating wind noise for clear audio. With an IP54 dustproof and splash-proof design, it is ideal for use in light rain or dusty environments. Clear audio is produced even when water splashes onto the speaker surface. The speaker has a maximum output of 2W, making it audible even in noisy places. It includes a 3.5mm headphone jack, allowing you to connect commercially available headphones (8Ω/L-shaped plug recommended). 【Compatible Models】 IP Radios - IP501H - IP502H - IP200H Digital Low-Power Community Radio - IC-DRC1 - IC-DRC1MK2

• others

The MP68 is a high-volume speaker microphone manufactured by Smart Wave Telecommunications. It can be used with IP radios and digital simple radios from Smart Wave and Icom. It features a large PTT button that is easy to press even when wearing gloves or work gloves. It uses a stretchable coiled cable that is resistant to tangling and less prone to breakage. With an IP67 dustproof and waterproof structure, it is ideal for use in heavy rain or dusty environments. *The waterproofing is maintained only when the rubber cap is attached to the earphone jack. There is no waterproofing effect when the rubber cap is removed or when an earphone is inserted. The speaker has a maximum output of 2W, making it audible even in noisy environments. It comes with a 3.5mm earphone jack, allowing you to connect commercially available earphones (8Ω/L-shaped plug recommended). 【Compatible Models】 IP Radios - IP501H - IP502H - IP200H Digital Low-Power Community Radio - IC-DRC1 - IC-DRC1MK2

• others

The B199041 is a waterproof case made by ON'S COMPANY. It can store the BbTALKIN and protect the radio from splashes and water droplets. The case has an IPX8 waterproof rating and an IP6X dustproof rating, so you can use the BbTALKIN safely even on rainy days, during work near water, or in dusty environments. The case is equipped with operational buttons for the radio, allowing you to turn the power on/off and switch channels while the device is stored inside. You can connect earphone microphones or headsets while they remain stored in the case. There is no need to use mounting screws; you can easily store the radio by removing the side fasteners and accessing it from the bottom of the case. By combining one of the following mounts on the back of the case, you can attach the BbTALKIN to a helmet: - Clip mount: Clip Mount B199055 - Double-sided tape mount: Helmet Mount B199068 【Compatible Models】 Multi-user simultaneous communication radio system - BbTALKIN CS - BbTALKIN ADVANCE

• others

The SK-T02 is a soft case made by Smart Wave Telecommunications. It is a soft case that can be used with IP radios and digital simple radios from Smart Wave and Icom. It protects the radio body from dirt and impact. The belt clip can be attached to the battery while stored in the case. The radio can be charged while it is stored in the SK-T02. All button operations can be performed even while the case is attached. 【Compatible Models】 IP Radios - IP501H - IP502H 【Features】 - Can store the radio with the belt clip attached to the battery - Can charge while stored - All buttons are operable For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

The "SK-T52" is a soft case made by Smart Wave Telecommunications. It can store the IP Smart Wave IP radio SK-5000 equipped with Smart Wave battery packs SK-P51 and SK-P52, protecting it from shocks and dirt. By removing the snap button on the bottom, you can charge the radio with the single charger SK-P54 while the case is attached. All button operations can be performed even while the case is on. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Can store the case with the belt clip attached to the battery ■ Can charge while stored ■ All button operations are possible For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

The "WX-M210" is a headset-type microphone (transmission only) manufactured by Panasonic (PANASONIC). It is designed to be used in conjunction with the Panasonic (PANASONIC) 300MHz band PLL tie-pin type wireless microphone WX-1800 (Panaguide), the 800MHz band tie-pin type wireless microphone WX-4300B, and the 800MHz band PLL headset type wireless microphone WX-4360B. *Note: It cannot be used with WX-1600 or WX-4370B as they do not have sensitivity switching. By utilizing the VOX function, hands-free operation is possible. *The VOX function automatically switches to transmission mode when sound is detected and automatically turns off the transmission switch when no sound is detected. The microphone is a unidirectional electret condenser microphone. A relay cable YWX4360LA0A-RV is also included. *It does not support simultaneous calls. *It does not have waterproof performance. 【Compatible Models】 Wireless Guide System - RD-M650AZ - RD-M750-D - WX-4300B

• others

The part number "X004360U01YD" is a headset component manufactured by Panasonic (PANASONIC). It is a headset-type microphone that is part of the standard configuration for the Panasonic (PANASONIC) 800MHz band PLL wireless microphone WX-4360B and the 800MHz band PLL instructor wireless microphone WX-4370B. Please use it in combination with the transmitter part WX-4300B of the WX-4360B and WX-4370B. A separate relay cable is required. - Relay cable (for WX-4300B, WX-4360B): YWX4360LA0A-RV - Relay cable (for WX-4370B): YWX4350LA0-RV *The model number has changed from the old model X004350U01 to X004360U01YD. 【Compatible Models】 Wireless Guide System - WX-4300B - WX-4360B - WX-4370B

• others

The WX-4370B (WX4370B) is a Panasonic-made 800MHz band PLL type pin-shaped wireless microphone. It can be used without the need for personal qualifications or registration. It operates on frequencies from 806MHz to 809MHz (Band B). This is a set product that includes the transmitter WX-4300B, headset microphone X004350U01, relay cable YWX4350LA0-RV, and a waterproof case. It can also be used as a microphone for the 800MHz band PLL wireless powered speakers WS-X66A, WS-X77, and WS-66A. Equipped with a sweat-resistant dedicated case (waterproof case), it is ideal for activities that involve intense movement. The band with hook-and-loop fasteners allows for easy attachment and detachment, securely fixing the main unit to your belt. The microphone is a unidirectional electret condenser microphone, making it less likely to pick up unnecessary noise. The transmitter body is made of antibacterial resin, ensuring cleanliness during use. The battery life is as follows: - One AA manganese dry battery: approximately 10 hours - One AA alkaline dry battery: approximately 25 hours - Nickel-cadmium battery pack WX-4451: approximately 8 hours

• Safety and consumables
• others

The "WX-4360B" is a Panasonic-made 800MHz band PLL headset-type wireless microphone. No personal qualifications or registration are required for use. It can be used as a transmitter for an 800MHz band wireless microphone system. It is suitable for situations where hands-free communication is needed, such as events, simultaneous interpretation, seminars, exhibitions, and for instructors in yoga or gyms. This product comes as a set with the transmitter WX-4300B and the headset-type microphone X004350U01. It can also be used as a microphone for the 800MHz band PLL wireless powered speakers WS-X66A, WS-X77, and WS-66A. The microphone is a unidirectional electret condenser microphone, making it difficult to pick up unnecessary noise. It features a hook-and-loop fastener band that allows for easy attachment and detachment, securely fastening the main unit to a belt. The transmitter body is made of antibacterial resin, ensuring cleanliness during use. Battery life: - One AA manganese dry battery: approximately 10 hours - One AA alkaline battery: approximately 25 hours - Nickel/cadmium battery pack WX-4451: approximately 8 hours

• Safety and consumables
• others

The CMF250 (CMF-250) is a high-performance common mode filter manufactured by Daiichi Denpa Kogyo (DIAMOND). It is a compact and small filter, measuring less than 20 cm, that effectively reduces unwanted radiation in the HF band, making it effective against radio interference. It suppresses radio interference (interference) such as TVI and BCI caused by common mode radiation. It has an attenuation of over 30 dB even in low band frequency ranges, making it effective for suppressing radio interference. It has low loss and can be used with radios of up to 200W. It is also effective in preventing malfunctions and electric shocks due to stray currents. It is connected between the radio and the antenna. *For more details, please feel free to contact us.

• others

The EMS-87BNC is a wireless speaker microphone with built-in noise cancellation features made by Alinco. It can be used in combination with Alinco's Bluetooth-compatible digital simple radio and specific low-power transceivers. Thanks to Bluetooth, operating without cables from the radio enhances convenience and improves safety by eliminating the risk of snagging cables. It is equipped with a high-performance noise cancellation function, providing clear sound quality. With an IP67 dust and waterproof rating, it can be safely used even in rainy conditions or during work in dusty environments. When fully charged, it can be used for approximately 12 hours. It comes with a rotating clip that can be attached to a chest pocket. The built-in battery capacity is 3.7V/980mA. 【Compatible Models】 Digital Simple Radio Registered Stations - DJ-DPS71 - DJ-DPX2 - DR-DPM61 Specific Low-Power Transceiver - DR-PM300SE For extremely low-priced earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The "EDC-295" is a charging stand made by Alinco. It is the same product as the single charger set EDC-295A and the connected charging set EDC-295R. It is also the same product as the Bluetooth wireless earphone microphone EME-80WMA and EME-80BMA accessories. When combined with the separately sold AC adapter EDC-300 or the charging cables EDS-37 or UX1647, it becomes a charger for AC100V. The charging terminal is microUSB. 【Compatible Models】 Digital Simple Radio Registered Station - DJ-DPX2 Specific Low Power Transceiver - DJ-PX10 【Features】 ■ Lightweight and compact size for portability ■ Can be powered from AC100V ■ Equipped with a microUSB charging terminal For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli.

• others

The "EDC-295A" is a charging stand manufactured by Alinco. It is a set product that includes the charging stand EDC-295, the charging AC adapter EDC-300, and the charging cable EDS-37. It can fully charge Alinco wireless earphone microphones EME-80BMA/EME-80WMA or the specific low-power transceiver DJ-PX10 in about 2 hours. You can charge it by connecting the charging USB cable UX1647 to the charging stand EDC-295 from a USB port, or by combining the charging AC adapter EDC-300 with the charging stand EDC-295 to charge from a household power supply of AC100V. Additionally, you can connect up to three units of the separately sold linking charging set EDC-295R to charge Bluetooth-compatible wireless earphone microphones EME-80BMA, EME-80WMA, or the specific low-power transceiver DJ-PX10 simultaneously for up to four devices. The charging terminal is microUSB. 【Compatible Models】 Digital Simple Radio Registration Station - DJ-DPX2 Specific Low-Power Transceiver - DJ-PX10 For unbeatable prices on earphone microphones and batteries, trust Excely.

• others

The "EDC-308R" is a four-unit charging stand manufactured by Alinco. When combined with the separately sold AC adapter EDC-300 and charging cable UA0105, it charges Alinco's Bluetooth-compatible wireless speaker microphones EMS-87B, EMS-87W, and the wireless speaker microphone EMS-87BNC with built-in noise cancellation. By connecting the back of the charging stand with the included linking cable UX1599, you can link up to four EDC-308R units together for simultaneous charging of four devices. It can be powered from a household AC 100V outlet. Its slim and compact design allows for installation without taking up much space. *Please note that the wireless speaker microphone EMS-87B is not included. *Please note that the EDC-308R cannot be used alone; it must be combined with the separately sold AC adapter EDC-300 and charging cable UA0105. [Compatible Models] Digital Simple Radio Registered Station - DJ-DPX2 Megaphone - DLS-01 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli.

• others

The EME-844 is a headset manufactured by ALINCO. It can be used in combination with the ALINCO hands-free megaphone DLS-01. Weighing only 36g, it is ultra-lightweight, allowing for stress-free use even over long periods. It is designed to be worn around the back of the neck, so it does not interfere with helmet use. It features a unidirectional electret microphone that picks up sound from a specific direction, making it suitable for use in noisy environments. The boom microphone can be adjusted to the user's preferred angle. A clip is included along the megaphone connection cable, allowing you to secure the cable without it becoming loose. The megaphone connection connector is a 1-pin screw type, making it difficult to detach during active use, such as when giving guidance. 【Compatible Models】 Megaphone - DLS-01 【Features】 ■ Unidirectional electret microphone ■ Ultra-lightweight at 36g ■ Fine angle adjustment for the microphone ■ Windshield cap included on the microphone ■ 1-pin screw type For extremely low prices on earphone microphones and batteries, trust Excely. *For more details, please feel free to contact us.

• others

The "EDC-300" is a charging AC adapter manufactured by Alinco. You can charge the following radios and accessories using the methods below: 【DJ-PHM10】 - By combining with the separately sold DC cable UA0105, you can connect the cable directly to the radio body and charge for about 3 hours. - By connecting the cable to the separately sold single/dual charging stand EDC-299R, you can charge for about 3 hours. 【DJ-PV1D】 - By combining with the separately sold USB charging cable EDS-32 and connecting it to the radio body, you can charge in about 4.5 hours. - When combined with the separately sold dual charging stand EDC-307, it can be charged in about 5.5 hours. 【EMS-87B, EMS-87W, EMS-87BNC, DLS-01】 - By combining with the separately sold DC cable UA0105 and connecting it to the dual charging stand EDC-308R, it can be charged in about 3 hours. 【EME-80WMA, EME-80BMA】 - By combining with the separately sold dual charging set EDC-295R and the charging cable EDS-37 included with EME-80WMA and EME-80BMA, it can be charged in about 2 hours. It can be powered from a household AC 100V power supply.

• others

The EDC-307 is a dual charging stand manufactured by Alinco. It can charge the Alinco digital low-power community radio DJ-PV1D (with Li-Ion battery pack EBP-180). Please charge it using the AC adapter EDC-300 and USB charging cable EDS-32 included with the standard configuration of the DJ-PV1D, connecting to a household power supply of AC100V. The estimated charging time from an empty state is approximately 5.5 hours. It can charge two units simultaneously. Although it is not a daisy-chaining charger, you can connect multiple EDC-307 charging stands for use (just by linking the charging stands). The connection method is as follows: 1. Connect the charging stands at two hooks on the side. 2. Insert the charging cables included with the radios into the back of each charging stand, then connect the AC adapter to an AC100V outlet. 3. For each charging stand, connect the charging AC adapter EDC-300 and USB charging cable EDS-32, and plug them into an AC100V outlet. 【Compatible Models】 Digital low-power community radio - DJ-PV1D

• others

The "EBP-180" is a Li-Ion battery pack manufactured by Alinco. It can be used in combination with the Alinco digital low-power community radio DJ-PV1D. This is a type of battery that is built into the main unit. The battery capacity is 3.8V/1960mAh, and when fully charged, the battery lasts for approximately 14 hours. The charging time (using EDC-300/EDS-32) is about 4.5 hours. It is a standard component of the Alinco digital low-power community radio DJ-PV1D. It can be purchased as a spare or replacement. 【Compatible Models】 Digital Low-Power Community Radio - DJ-PV1D 【Features】 ■ Operable for up to approximately 14 hours ■ Battery capacity 3.8V/1960mAh ■ Charging time approximately 4.5 hours

• others

The "EME-53A" is a 2-pin plug type helmet headset manufactured by Alinco. It can be used with specific low-power transceivers made by Alinco. It also supports simultaneous communication (only with Alinco transceivers that have PTT lock functionality). With ear-covering speaker pads, it can be used in noisy environments. It features a high-quality dynamic microphone that is less likely to pick up surrounding ambient sounds. Being designed for professional use, it is more durable than general-purpose models and can be repaired. It can be used on either the left or right ear side. *Adjustment of the pad position is necessary. 【Compatible Models】 Specific low-power transceivers: - DJ-CH202/DJ-CH272/DJ-CH3 - DJ-M10/DJ-P300/DJ-R200D - DJ-P221/DJ-P222/DJ-P240 - DJ-P921 - DJ-PB20/DJ-PB27 - DJ-PX31/DJ-TX31 - DJ-U1 Digital simple radio registered stations: - DJ-DP10 - DJ-DP50H/DJ-DP50HB - DJ-DPS70/DJ-DPS71 - DJ-DPX1/DJ-DPX2

• others

The "DJ-P921" is a specific low-power transceiver manufactured by Alinco. It is a specific low-power transceiver that allows you to choose between a long antenna (L) for communication distance and a short antenna (S) for portability. It supports group settings to reduce interference and noise, with a maximum of 50 groups that can be configured. Its palm-sized compactness allows you to carry it in your chest pocket. Battery life: - Two AA alkaline batteries: approximately 41 hours - Nickel-hydride battery pack EBP-57N (sold separately): approximately 33 hours *Estimated time based on a usage ratio of transmit 5: receive 5: standby 90. It also comes with a variety of features: - VOX function for hands-free communication - Reception-only mode that can be used as a sub-unit for a guide system - Earphone disconnection detection function that alerts with sound - Emergency call function - Callback function that allows you to hear your own voice in the earphone while transmitting - Low battery warning function that alerts you with sound when the battery is running low A wide range of dedicated accessories is also available. You can also try a demo unit for free in advance, so please feel free to ask.

• others

The "EDC-121A" is a standard charger manufactured by Alinco. It can charge specific low-power transceivers made by Alinco. A dedicated AC adapter, EDC-122, is also included as a standard set. The approximate charging time is about 12 hours. *When using the nickel-hydride battery pack EBP-57N. 【Compatible Models】 Specific low-power transceiver - DJ-P921 【Features】 ■ Comes with a dedicated AC adapter ■ Can be powered from AC100V ■ Charging time is approximately 12 hours For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The "EDC-121R" is a single connection stand made by Alinco. It can charge specific low-power transceivers made by Alinco. When combined with the separately sold AC adapter EDC-122, up to 5 EDC-121R units can be connected. A connection cable is also included. You can charge the nickel-metal hydride battery pack EBP-57N (manufacturer's suggested retail price 1,200 yen excluding tax) while it is attached to the transceiver body. The charging time for the nickel-metal hydride battery pack EBP-57N is 12 hours. 【Compatible Models】 Specific low-power transceiver - DJ-P921 【Features】 ■ Can connect up to 5 units ■ Can be powered from AC100V ■ Charging time is approximately 12 hours ■ Connection cable included For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The "EME-29AM" is a professional-grade microphone manufactured by Alinco. It is a product that excludes the earphone from the earphone microphone EME-29A (includes microphone, cable, and connector). It features a PTT button lock function, allowing continuous transmission when the transmitter is in 1mW mode. The earphone jack size is 2.5mm. A rotating clip is included on the back of the microphone, allowing for adjustable mounting angles. It comes with a windscreen sponge to reduce wind noise. 【Compatible Models】 Specific low-power transceivers: - DJ-CH202 - DJ-CH272 - DJ-PX31 - DJ-TX31 - DJ-P921 - DJ-PB20 - DJ-PB27 Intercom and complex relay specific low-power wireless communication system: - DJ-U1 【Features】 ■ High durability ■ PTT button lock function ■ Clip for attachment to the chest ■ Earphone jack size is 2.5mm ■ Comes with a windscreen sponge to reduce wind noise For extremely low prices on earphone microphones and batteries, trust Excely. *For more details, please feel free to contact us.

• others

The "EBP-57N" is a nickel-metal hydride battery pack manufactured by Alinco. It is designed for specific low-power transceivers made by Alinco. The nickel-metal hydride battery has a capacity of 1.2V/1800mAh, and when fully charged, it can last for approximately 50 hours. *The battery life is based on a communication ratio of 5:5:90 for transmission, reception, and standby, respectively. Usage time may vary depending on the model of the radio and the output of the radio waves. The charging time (using EDC-300/EDS-32) is approximately 4.5 hours. It can be charged in about 12 hours using the single connection stand EDC-121R. It has a compact size, the same as AA alkaline batteries. 【Compatible Models】 Specific low-power transceivers - DJ-P921 Receivers - DJ-X8 【Features】 ■ Operable for up to approximately 50 hours ■ Battery capacity of 1.2V/1800mAh ■ Charging time of about 4.5 hours ■ Compact size similar to AA alkaline batteries

• others

The DR-BU61D is a digital simple radio licensed station manufactured by Alinco. A license application is required, but no personal qualifications are necessary for use. It is a mobile transceiver for UHF 467MHz band digital simple radio licensed station 3B, and since it uses the AMBE method, it can communicate with digital simple radio licensed stations from other manufacturers. Equipped with Bluetooth functionality, it is a higher model that supports Bluetooth wireless microphones compatible with the conventional model DR-BU60D. With a high output of 5W, it has excellent transmission range and can provide stable communication. The output can be switched between three levels, allowing communication at an appropriate output for the situation. The IP67 dustproof and waterproof wireless speaker microphone EMS-87B, along with the high-performance noise-canceling wireless microphone EMS-87BNC, delivers a loud volume of 3W. The EMS-87BNC effectively removes background noise from the transmitted sound, making it ideal for operation in noisy environments. It can be used in combination with a separately sold stabilized power supply for office or base station use. It is also capable of operating in sub-zero temperatures, making it suitable for use inside large cold storage warehouses.

• others

The DJ-P115R is an indoor relay device for specific low-power wireless communication equipped with guidance transmission functionality, manufactured by Alinco. It can be used without the need for personal qualifications or registration. This wireless relay device can wirelessly transfer analog audio signals, such as scheduled broadcasts, to specific low-power transceivers. It can avoid the effects of carrier sense. By setting and operating the DJ-P115R and the child unit's specific low-power transceiver in alternating call relay mode, guidance audio can be mixed and transmitted. It also allows for adjustment of the input audio level, enabling clear sound quality transmission. During normal use, it consumes about 1.5A of current even at a maximum volume output of 3W, designed with environmental considerations in mind. A free trial before purchase is available, so please feel free to contact us. 【Features】 ■ Equipped with guidance transmission functionality ■ Can be powered from a household AC source ■ Compact and lightweight design for easy installation ■ Adjustable input audio level ■ Audio output of 3W or more ■ Fully charged in about 3 hours, with approximately 10 hours of relay operation *For more details, please refer to the PDF document or feel free to contact us.

• others