エクセリ List of Products and Services

● The AX-HM250 (AXHM250) is a helmet mount manufactured by Zacty Corporation. ● It is a helmet mount for the CX-WE100 camera, which is used for stabilizing footage while mounted on a helmet. ● It is convenient for hands-free video recording from the wearer's perspective. ● The mounting position can be switched between left and right. ● The camera unit can be attached and detached with one touch. ● It can also be replaced with the included fixed arm. *For more details, please contact our company.*

The USB3-AFCM01BK (USB3AFCM01BK) is a USB conversion cable A to C made by Elecom. It is necessary when connecting the main unit ST#7704 of the remote support wearable camera U-BOX AT with the stabilization cameras CX-WE100 and CX-WE300. It converts the connector of the stabilization cameras CX-WE100 and CX-WE300 from Type-A to Type-C. *For U-BOX AT (WT/WZ) DE200, it is not needed as there is a Type-A interface. The cable length is approximately 8 cm (excluding connectors).

●CSEA25 (CSEA-25) is a CS/BS preamplifier manufactured by Nippon Antenna. ●It has a maximum gain of 22dB. ●This preamplifier is compatible with 4K and 8K broadcasts (3.2GHz) and is used to connect a receiving amplifier to a receiving antenna. ●It amplifies BS-C-IP signals (1000–3224MHz) while allowing FM, VHF, and UHF signals (10–770MHz) to pass through. ●Current can pass between the output terminal and the BS/CS input terminal. ●Current can also pass between the output terminal and the U/V input terminal with a switch operation. ●When installing on a mast, please use a separately sold HI Kanagu or commercially available stainless steel band. ●It is for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.

● FC-ASJ4(J) and FC-ASJ5(J) are CS converter units (local oscillator 11.3GHz) manufactured by Nippon Antenna. ● This product is a set that includes a feed horn and a CS converter (local oscillator 11.3GHz). ● It converts signals in the 12GHz band to the 1GHz band. ● It has low noise. With an excellent noise figure (NF), it can receive clear images with a good S/N ratio. ● It is for joint reception. ● It is a product compatible with J-Alert. *For more details, please feel free to contact us.*

● WX-SA001 (WXSA001) is an antenna power supply unit manufactured by Panasonic. ● It is a unit that supplies power to wireless antennas such as the 1.9GHz band digital wireless microphone system's WX-SA250A (for medium to large spaces). ● When using multiple systems, it connects to the reference antenna of the main system to synchronize. ● It is used when wirelessly synchronizing multiple receiving systems. ● Even when the power of wireless receivers like WX-SR202A and WX-SR204A is off, it is possible to supply power to the wireless antenna. ● When the power of the wireless receiver is off, antenna field settings can be configured with WX-SA001. *For more details, please feel free to contact us.*

● WX-SA002 (WXSA002) is a coaxial conversion unit manufactured by Panasonic. ● It is a unit that converts LAN cables (CAT5/CAT5e/CAT6 straight cables) used for connecting wireless antennas and wireless receivers into coaxial cables. ● It allows the use of a 1.9GHz band digital wireless system (for medium to large spaces) by utilizing existing coaxial cables. ● Coaxial cables can be used up to a maximum length of 100m. ● It is provided as a set for both the receiver side and the antenna side. ● When at least one coaxial conversion unit is connected, a maximum of 8 wireless microphones can be used. *For more details, please feel free to contact us.

●CSE452 (CSE-452) is a CS/BS booster manufactured by Nippon Antenna, compatible with 3224MHz and has a gain of 45dB. ●It is a CS/BS booster with a maximum gain of 45dB, supporting 4K and 8K broadcasts (3.2GHz). ●It is a high-shield type that achieves unwanted radiation of 34dBμV/m or less with the device alone. ●It is designed for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.

The WX-SP104R1 (WXSP104R1) is a base station manufactured by Panasonic. It is designed for small spaces. This unit supplies power to the antenna station WX-SR152 of the 1.9GHz band digital wireless microphone system and outputs audio from wireless microphones or portable wireless transmitters. *Compatible wireless microphones include: boundary type wireless microphone WX-ST700, handheld type wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 + gooseneck microphone WM-KG645, waterproof type wireless microphone WX-ST210, dynamic type wireless microphone WX-ST250, lapel type wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. *Audio can be adjusted by volume for each input system, allowing for separate outputs and mixing outputs for each input system. *For more details, please feel free to contact us.

The WX-SE200A (WXSE200A) is an expansion wireless receiver manufactured by Panasonic. It is an expansion wireless receiver for a 1.9GHz digital wireless microphone system. It can be used with up to four wireless microphones. You can connect up to three WX-SE200A units to the wireless receivers WX-SR202A / WX-SR204A. By connecting three WX-SE200A units to the WX-SR204A, you can use a maximum of 16 wireless microphones. *Compatible wireless microphones include: boundary type wireless microphone WX-ST700, handheld type wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 + gooseneck microphone WM-KG645, splash-proof wireless microphone WX-ST210, dynamic type wireless microphone WX-ST250, lapel type wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. *For more details, please refer to the PDF document or feel free to contact us.

The CMF250 (CMF-250) is a high-performance common mode filter manufactured by Daiichi Denpa Kogyo (DIAMOND). It is a compact and small filter, measuring less than 20 cm, that effectively reduces unwanted radiation in the HF band, making it effective against radio interference. It suppresses radio interference (interference) such as TVI and BCI caused by common mode radiation. It has an attenuation of over 30 dB even in low band frequency ranges, making it effective for suppressing radio interference. It has low loss and can be used with radios of up to 200W. It is also effective in preventing malfunctions and electric shocks due to stray currents. It is connected between the radio and the antenna. *For more details, please feel free to contact us.

● RSB-BA5-MJ (RSBBA5MJ) is a roof side base made by Nippon Antenna. ● It is a base used for installing antenna equipment for mobile radios on the roof side of a vehicle. ● Please use it in combination with separately sold antenna elements (with M-P connectors) such as HGB-150-2-09EL and GB-060L-2-09EL. ● It comes with the following connectors: - Antenna connection side connector: M-J connector - Radio connection side: It has an attachment connector, and you can choose between M-P or N-P connectors depending on the radio used. ● A 5m coaxial cable (5D-2V) is included. ● The installation method is gutter mounting. *For more details, please feel free to contact us.

● OPK-5 (OPK5) is a connection cable set made by ICOM for the second exciter. ● This is the connection cable for the second exciter when using two exciters with the IC-PW2. ● This product includes a coaxial cable (approximately 3m), an ACC cable (approximately 3m), and a mini plug cable (approximately 3m). ● It is an accessory for amateur radio equipment.

●S8003532 is an ear pad for the SSM-BT20 made by YAESU (Yaesu Musen/Standard Horizon). ●It can be purchased as a replacement part for the ear pad of the Bluetooth earphone microphone SSM-BT20. ●Please use it as a replacement or spare. ●Each size (S, M, L) includes one piece. *For more details, please feel free to contact us.*

●CEH17 (CEH-17) is an ear hook for earphones made by wave CSR. ●It is an ear hook that can be attached to the earphone parts of separately sold earphone microphones such as CMP816, CMP816B, CMP816C, CHP823-2, CHP823-3, MH-62A4B, CTM500, CTM825, PMLN7990, etc. *For more details, please feel free to contact us.

●203X154020 is a standard (STANDARD) earphone ear tip (black, large). ●It is an ear tip equivalent to the accessory for earphone ZE10080320. ●The color is black and the size is large. ●It can be purchased as a replacement part. *For more details, please feel free to contact us.*

●PP10239 is a volume knob for the TANIZAWA model 722 and 727M. ●It is the volume knob for the TANIZAWA simultaneous communication radios ST#727M and ST#722LG. ●It can be purchased as a replacement part. *For more details, please feel free to contact us.*

The AD-92SMA (AD92SMA) is an SMA to BNC conversion adapter made by ICOM. The AD-92SMA has one side with an SMA-J (female) connector and the other side with a BNC-P (male) connector. It is used to attach an antenna with a BNC-J connector to a radio with an SMA-P connector. It is securely fixed with a nut, providing peace of mind during use.

The VB400-EXT-CHARGE (VB400EXTCHARGE) is a charging cable for the VB400 made by Motorola. It allows for simultaneous charging and configuration of the Motorola Body Camera (BWC) VB400, as well as transferring video to the VB400 management software VideoManager. It serves as a lightweight alternative to the VB400 single-port dock. The power side connector is USB Type-A, and the cable length is 2 meters.

●DB2-SA5W (DB2SA5W) is a 2-way splitter (hybrid type) manufactured by Nippon Antenna. ●It is a hybrid type splitter for high-frequency signals. ●It is mainly used to equally distribute high-frequency signals from antennas and radios to multiple devices (up to 2-way distribution). ●It supports a frequency range of 76 to 470 MHz (VHF/UHF band) and an output of up to 5W. ●The connector is an NJ connector. *For more details, please feel free to contact our company.*

●OPC-2401 (OPC-2401#11) is a headset adapter cable made by ICOM. ●It is an adapter used to connect a headset to the VHF airband transceivers IC-A16 and IC-A16E. ●It features an LWP connector.