エクセリ List of Products and Services

The DK-SF03G (DK-SF03) is a Sensor FOX location management system manufactured by Alinco. It is an optimal GPS monitoring system for managing the location and quantity of vehicles and equipment within a large area. You can confirm the positions of sensors, vehicles, and equipment on the premises. The DK-SF03G is a location tracker that does not require real-time tracing. It captures location information through GNSS surveying. The geofence function can detect changes in a "designated area." It operates on two AA alkaline batteries. It can also be powered using the separately sold AC adapter EDC-323 with an AC100V power supply. When using the AC adapter, it is no longer dustproof or splash-proof. If installed outdoors, please use a resin waterproof case for protection. Metal cases cannot be used as they block signals. It can be charged via the USB connector with the separately sold DC cable UA0105. It can also be charged from the car's DC12V/24V cigarette lighter power using the cigarette DC/DC converter EDH-33. Additionally, it can be fixed to a wall using the separately sold mounting bracket ADBSF03G.

●ADBSF03G (ADBSF-03G) is a fixed bracket made by Alinco. ●It is used to mount the Sensor FOX location management system DK-SF03G to the wall. ●Attach the DK-SF03G unit facing upwards to the wall using the included screws (black M3×12). * A Phillips screwdriver is required for screw installation.

The RYK-MB3220W (RYKMB3220W) is a communication-type drive recorder manufactured by Mmobility Co., Ltd. It is a communication-type drive recorder that can be connected to the Mobile Create vehicle-mounted IP radio terminal IM-870. Communication to the server of the RYK-MB3220W is done via the IM-870, allowing for reduced communication costs. This communication-type drive recorder can simultaneously record high-quality images of the front of the vehicle and the interior. It can also acquire GPS location information. It sends real-time video of the vehicle's driving location and any dangerous driving or abnormal occurrences to the server. It integrates with the Mmobility operation management service DSMART, allowing emergency notifications to be sent to operation managers from DRSMART. Equipped with two cameras, it can simultaneously record images at a standard size of 1280x720. It features night vision camera functionality. By setting the interior camera to zoom in, it is also possible to check on following vehicles. It allows for simultaneous audio recording of the interior along with the images. It sends event detection (dangerous driving alerts) and dynamic management data.

●CAW5580 (CAW-5580) is an RS-232C connection cable manufactured by wave CSR (formerly Lecuo STANDARD). ●It is a data communication cable for the standard vehicle-mounted digital simple radio license station (3B/3C/3D) GX5580UCB. ●This cable is used to connect the radio to a computer or similar device. The connector on the PC side is compatible with RS-232C. ●It is recommended to have the installation done by the manufacturer to connect to the radio's circuit board. Additional installation costs will apply. *While customers can install it themselves, the manufacturer advises against it as it may cause malfunctions. ●The cable length is approximately 40 cm from the radio.

●CAW5580E (CAW-5580-E) is an e-bridge connection cable made by Wave CSR. ●It is a cable for the standard vehicle-mounted digital simple radio license station (3B/3C/3D) GX5580UCB. ●This connection cable is used to connect the GX5580UCB to the smart wave telecommunications e-bridge adapter CET1378FA-S for communication with IP radios and digital MCA radios.

● EDS-44 (EDS44) is a PTT switch cover made by Alinco. ● It is designed for specific low-power transceivers DJ-P422B-TM / DJ-P422B-TL, DJ-P421LA / DJ-P421MA made by Alinco. ● It is fixed with two included screws to the separately sold belt clip EBC-70. ● When attached to the radio, you can transmit by lightly pressing the cover, which is like a lid. It is wider and larger than the PTT key, allowing for intuitive operation of the radio attached to your belt, and it can also be used as a PTT for Bluetooth microphones. *For more details, please feel free to contact us.

The K540 (K-540) is a carrier pipe base (foldable) manufactured by Daiwa. It is an antenna base used for mounting antennas on vehicle side mirror pipes, carrier pipes, and railings of apartments or housing complexes. The compatible pipe diameter is Φ15 to Φ25mm. Please use it in combination with separately sold antenna elements. It is designed to match the Super Gainer series, but can also be combined with other antennas. Angle adjustment is possible. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

● K515 (K-515) is a roof rail dedicated base (mid-size base) manufactured by Daiwa (Diamond) with a variable mounting width. ● It is an antenna base used for mounting the antenna of a vehicle-mounted radio on the car's roof rail. It can be installed on various car roof rails. ● Please use it in combination with separately sold antenna elements. ● Compatible pipe diameter is Φ8 to Φ32mm. ● It is compatible with rails that are 50mm or less in height and 48mm or less in width. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*

The FC-ZXPROLC (FCZXPROLC) is a connection charging cable manufactured by F.R.C. Co., Ltd. By combining it with the separately sold AC adapter FC-AC01, you can simultaneously charge up to four specific low-power transceivers made by F.R.C., including NX-20X, NX-20R, NT-202M, FC-ZXPRO, and FC-B203. It is a 4-way micro USB charging cable. The cable length is approximately 1.2 meters.

The SX20C (SX-20C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radio equipment. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and SWR at the intersection of both. The frequency range is 3.5 to 30 MHz, 50 to 54 MHz, and 130 to 150 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

The SX40C (SX-40C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radio equipment. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and to read SWR at the intersection of both. The frequency range is 144 to 470 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

The SX240C (SX-240C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It has two built-in sensors for the frequency ranges of 1.8 to 54 MHz and 140 to 470 MHz. It is a measuring instrument for radios. This cross-type power meter is designed with two sets of meters to read forward power, reflected power, and SWR at the intersection of both. With the use of two sensors, it can measure a wide range from HF to UHF bands. It features illumination for better visibility. The connector is MJ. *For more details, please feel free to contact our company.

The SX27P (SX-27P) is a compact SWR and power meter manufactured by Daiwa (Diamond Antenna) for the 144/430MHz band. It is a measuring instrument for radios. It can read power and SWR. The frequency range is 140 to 150MHz / 430 to 450MHz. The connector is MJ. It is small and lightweight, making it convenient to carry. *For more details, please feel free to contact our company.*

The WL-AC1000 (WLAC1000) is a photocatalytic sterilization and deodorization device called fresair, manufactured by JVC Kenwood. It features the patented ALMION filter technology, which rapidly decomposes odors. *This is a patented technology of APS Japan Co., Ltd. *The ALMION filter has a self-cleaning effect, making maintenance easy and cost-effective. *The ALMION filter uses photocatalytic action to convert invisible viruses, bacteria, and odors in the air into water and carbon dioxide. It can cover an area of up to 25 tatami mats, circulating the air in about 60 minutes for 25 tatami mats and about 19 minutes for 8 tatami mats. It is a high-performance model specialized for sterilization and deodorization. With a compact size of 8 cm in depth, it can be installed anywhere. The included remote control makes it easy to operate from a distance. It operates on a household power supply of AC 100V. *For more details, please feel free to contact us.

●MBZ-2 (MBZ2) is a dustproof unit for the ICOM IP50G. ●By attaching it to the IP gateway IP50G, it protects the terminal and achieves a dustproof performance of IP5X. It can be safely used in outdoor environments or areas with dust. *It has been tested by leaving it in a dust environment with a concentration of 2 kg of test dust per cubic meter for 8 hours, after which it was retrieved and continued to function. ●When combined with the separately sold MB-89, it can be securely fixed to a mast. *For more details, please feel free to contact us.

The DK-SF08G (DKSF08G) is a GPS location information system manufactured by Alinco. It is a compact GPS tracker that communicates via Sigfox. It transmits location data obtained from signals from GPS satellites to smartphones and tablets anywhere within the Sigfox area using Sigfox communication. *Sigfox is one of the LPWA (Low Power Wide Area) networks, which covers 98% of the population in Japan and is a global IoT network. It is characterized by low cost, low power consumption, and long-distance transmission. In Japan, Kyocera Communication Systems Co., Ltd. operates services using the frequency band regulated as active tags in the 920MHz band. It is deployed in over 70 countries worldwide (as of January 2023), using the 868MHz band in Europe, the 902MHz band in the United States, and the 920MHz band in the Asia-Pacific region. *It can also be integrated with a web browser application from Alinco under a separate contract.

● DK-SF11CA (DKSF11CA) is the Sensor FOX Care Regular Delivery 2 made by Alinco. ● Alinco's "Care Regular Delivery 2" is an intercom-type IoT device that communicates the risk of heatstroke and daily safety to distant family members. ● Communication is done via Sigfox. ● The first generation Care Regular Delivery DK-SF01CA has been equipped with a heatstroke alert function. It can be used to inform distant family members about the risk of heatstroke and daily safety. ● It can perform three functions: "Heatstroke Alert Function," "Regular Health Check," and "Emergency Notification." ● During the contract, Alinco will conduct a hearing with the customer to set and program the email address and template message content before delivery. ● It operates using a household power supply of AC100V with the included AC adapter. Additionally, two AA alkaline batteries or two AA lithium batteries (sold separately) can also be used. It operates for about one year with an average number of notifications.

The DM-340MV (DM340MV) is a stabilized power supply for radio equipment manufactured by Alinco, with a maximum output of 35A. It is a highly versatile stabilized power supply for radios, featuring twin meters and equipped with a temperature-controlled fan. It is suitable for use in vehicles with a cigarette plug and two snap terminals, making it ideal for use at companies or homes. The radio equipment is rated for an output of up to 100W, while the power booster can handle up to 200W. It converts AC 100V to DC 12V.

● The DK-LR11 (DKLR11) is a wireless call device equipped with a LoRa temperature and humidity sensor made by Alinco (ALINCO). ● It features a heatstroke warning function. ● Communication is done via LoRa. * LoRa is one of the LPWA (Low Power, Wide Area) communications defined by ARIB-STD-T108, utilizing a communication method in the Sub-GHz band, which is below 1GHz. ● The child unit notifies the parent unit of the environmental conditions (heat index = WBGT) around it, and the parent unit alerts with a voice guide. ● Multiple DK-LR11 units can be set up with one parent unit and up to 10 child units. * For detailed settings of the parent and child units, a connection cable (external contact cable) EDS-47 for the free setting software (sold separately) is required. * For more details, please refer to the PDF materials or feel free to contact us.

● EDS-49 (EDS49) is a coaxial cable manufactured by Alinco. ● It is for the power management and monitoring system XE1151SE. ● It connects to the separately sold antenna EA-314. ● The cable length is 50 cm. ● The connector on the antenna side is SMA-J, and on the XE1151SE main unit side, it is SMA-P.

●PC143 (PC-143) is a USB Type-C power cable manufactured by Hytera. ●It is a charging and data transfer cable for the rugged business smart device PNC460 and the UL explosion-proof PNC460U. ●When combined with the PNC460 / PNC460U power adapter PS2022, it charges the PNC460 / PNC460U from an AC100V power source. ●It can also be used as a data transfer cable. ●The cable length is approximately 1 meter. ●It is a standard accessory for the PNC460 / PNC460U body. *For more details, please feel free to contact us.

● WTUE7 (WTUE-7) is a television terminal with a built-in time information transmitter manufactured by Nippon Antenna. ● It is a device that uses terrestrial digital broadcast television signals to correct the time of radio clocks. ● To obtain time information from terrestrial digital broadcast television signals, it can be installed and used with the same type of wiring as a regular indoor television. ● It can automatically correct radio clocks even in places where standard radio waves do not reach, such as inside apartments, buildings, large structures, or underground. *For more details, please feel free to contact our company.*

● HKD4PSD (HKD-4-PSD) is a movable body 4-way splitter (power supply type for all output terminals) manufactured by Nippon Antenna. ● It is a splitter for the TV terminal WTUE7 with a built-in time information transmitter. ● By connecting the dedicated AC adapter HKDAD, power can be supplied to all output terminals. ● Each output terminal can output a maximum of DC15V/0.8A. *For more details, please feel free to contact our company.*

The HKD6PSD (HKD-6-PSD) is a movable 6-way splitter manufactured by Nippon Antenna, designed for all output terminals to transmit power. It distributes the time information transmitter built into the television terminal WTUE7 into six outputs. By connecting the dedicated AC adapter HKDAD, it is possible to supply AC 100V power to all output terminals. Each output terminal provides a maximum output of DC 15V/0.8A. *For more details, please feel free to contact us.

● PM-IP500 (PMIP500) is a location information display software made by Icom. ● It is software for managing GPS location information from Icom's IP radios on a computer. It is on-premises rather than cloud-based. ● A computer, mapping software (Shobunsha Super Mapple Digital 15/16 nationwide version is recommended), and IP500G are required (all sold separately). ● Install the mapping software on the computer, then install PM-IP500, and connect it to the IP500G for use. ● Internet connection is not required. ● No running costs are required. ● As of April 2022, in addition to IP500G, IP500M, IP501M, VE-PG4, and VE-SP2 are also compatible. ● PM-IP500 can be obtained for free from the PM-IP500 download. *For more details, please feel free to contact us.*

●C-SP-8 (CSP8) is a portable sky pole (telescopic) manufactured by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 7.5m when extended and about 1.8m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

●C-SP-6 (CSP6) is a portable sky pole (telescopic) manufactured by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 5.6m when extended and about 1.7m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

●C-SP-10 (CSP10) is a portable sky pole (telescopic) manufactured by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 9.4m when extended and about 1.9m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

The NMPST303B (NMPST-303-B) is an uninterruptible power supply (lightning-resistant type) manufactured by Nippon Antenna. It is an uninterruptible power supply designed to provide power to TV relay facility equipment. The output capacity is 90VA. Normally, it supplies power to the load via an isolation transformer using commercial power AC100V while simultaneously charging the storage battery. In the event of a power outage, the inverter automatically starts, converting the DC power from the storage battery into AC power to continue supplying the load. It consists of a transformer, inverter, charger, and storage battery, with the storage battery being a small sealed lead-acid battery. Repairs can be performed without interruption in the event of a control unit failure. It features a stainless steel drip-proof case. It is equipped with measurement terminals for checking load current, making maintenance and inspection easy. It also has STM output terminals (contact output terminals). It has high lightning resistance, constructed with a lightning-resistant transformer that has insulation withstand voltage and surge voltage attenuation performance, along with a highly reliable protective device that prevents lightning surges, making it ideal for use in areas with frequent lightning. The operational status can be checked from outside. *For more details, please feel free to contact us.*

●NMPST1001 (NMPST-1001) is an uninterruptible power supply (lightning-resistant type) manufactured by Nippon Antenna. ●It is an uninterruptible power supply designed to provide power to TV relay facility equipment. ●The output capacity is 100VA. ●Normally, it supplies power to the load via an isolation transformer using commercial power AC100V while simultaneously charging the battery. ●In the event of a power outage, the inverter automatically starts, converting the DC power from the battery into AC power to continue supplying the load. ●It consists of a transformer, inverter, charger, and battery. The battery is a small sealed lead-acid battery. ●It has a stainless steel drip-proof case. ●It has high lightning resistance. It is composed of a lightning-resistant transformer with insulation withstand voltage and surge voltage attenuation performance, and a highly reliable protective device that prevents lightning surges, making it ideal for use in areas with frequent thunderstorms. ●When the battery voltage drops below the specified level, the over-discharge prevention circuit activates. ●The operating status can be checked from the outside. ●Please choose a steel pipe pole with a diameter of φ140 to 350mm for installation. *For more details, please feel free to contact us.*

The NMPS615A (NMPS-615-A) is an uninterruptible power supply (AC60V type) manufactured by Nippon Antenna. It is an uninterruptible power supply designed for large-scale CATV facilities. In the event of a power outage, it automatically switches to battery power and supplies AC60V to the shared reception facility. It is equipped with an STM output terminal (contact output terminal) and has measurement terminals for checking load current, making maintenance and inspection easy. To prepare for power outages lasting more than 2 hours or unforeseen circumstances, it has a 100V emergency input connector. Please choose a steel pipe pole with a diameter of φ140 to 350mm for installation. It comes in a stainless steel drip-proof case. For installation, please select a steel pipe pole with a diameter of φ140 to 350mm. *For more details, please feel free to contact our company.

The NMPS606A (NMPS-606-A) is an uninterruptible power supply (AC60V type) manufactured by Nippon Antenna. It automatically switches to battery power during a power outage, supplying electricity to communal reception facilities. During normal operation, it steps down commercial power from AC100V to AC60V to supply power to the load while simultaneously charging the storage battery. The built-in storage battery is a small sealed lead-acid battery rated at DC12V 24Ah (20HR). It consists of a transformer, inverter, charger, and storage battery. The unit is housed in a stainless steel drip-proof case. A safety circuit allows for operation solely on commercial power, enabling maintenance of the control unit and battery replacement without power interruption. It is equipped with STM output terminals (contact output terminals) and measurement terminals for load current monitoring, making maintenance and inspection easy. To prepare for power outages lasting over two hours or unforeseen circumstances, a 100V emergency input connector is provided. Please choose a steel pipe column with a diameter of φ140 to 350mm for installation. *For more details, please feel free to contact us.*

●UX-267 (UX267) is a GPS unit manufactured by ICOM. The manufacturer model number is UX-267#14. ●It can be connected to the digital simple radio license station IC-DU7505#11. *It cannot be connected to IC-DU7505#13 and IC-DU7505N. ●It has IPX6 waterproofing (when the radio is mounted). ●It features an easy-to-install magnetic attachment type. *For more details, please feel free to contact us.

● VideoManager is a customizable digital evidence management solution manufactured by Motorola. ● The device license is VM-EPL-VB-1-3YSA. ● It is management software for body-worn cameras (BWC) VB400 and VT100. ● You can prepare, process, share, and organize high-quality evidence footage obtained from VB400 and VT100.

The NMPS303A (NMPS-303-A) is an uninterruptible power supply (AC30V type) manufactured by Nippon Antenna. It automatically switches to battery power during a power outage, supplying electricity to shared reception facilities. During normal operation, it steps down commercial power from AC100V to AC30V to supply power to the load while simultaneously charging the storage battery. The built-in storage battery is a small sealed lead-acid battery with a capacity of DC12V 24Ah (20HR). It consists of a transformer, inverter, charger, and storage battery. The case is made of stainless steel and is drip-proof. A safety circuit allows operation using only commercial power, enabling maintenance of the control unit and battery replacement without power interruption. It is equipped with measurement terminals for load current verification, making maintenance and inspection easy. It also features STM output terminals (contact output terminals). Please choose a steel pipe column with a diameter of φ140 to 350mm for installation. *For more details, please feel free to contact us.

●UA0114 (UA-0114) is a DC cable made by Alinco. ●It is a standard component of the vehicle-mounted digital simple radio registration station 3R/3TDR-DPM80. It can be purchased as a replacement or spare part. ●It is the cable that connects the DC power supply to the radio unit.

● EDS-48 (EDS48) is a separate kit manufactured by Alinco. ● It allows for a separation of 5 meters between the main unit of the vehicle-mounted digital simple radio registration station 3R/3TDR-DPM80 and the front unit. ● No tools are required for connecting the cables. A Phillips screwdriver is needed to remove the front unit. *For more details, please feel free to contact us.*

●D-0601 (D0601) is a 60MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals to various terminals such as radios. ●The supported frequency range is a specified frequency of 50 to 75MHz. Please specify the fo (center frequency) in MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. *For more details, please feel free to contact our company.*

●D-2601 (D2601) is a 260MHz band 2-way splitter manufactured by Nippon Antenna, operating in the 260-275MHz range. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not adequate for the transmitting and receiving splitter, please use it only for antenna coupling. ●The supported frequency range is 260-275MHz or a specified frequency within that range. Please specify the operating frequency when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1950mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

●D-4001 (D4001) is a 400MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not achieved in the transmitter/receiver splitter, please use it only for antenna coupling. ●The supported frequency range is specified frequencies from 330 to 470MHz or within a bandwidth of 20MHz. Please specify fo (center frequency) in MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

The SV-S60 (SVS60) is a dynamic management system iGPS7plus2 manufactured by Smart Wave Telecommunications (Tom Communication Industry). It allows for the management of the location and status of IP radios such as the SV-2000 (vehicle-mounted) and SK-5000 (portable) on company PCs. It is an on-premises type that excels in security and stability compared to cloud-based systems, operating on NTT Docomo's network + closed network. The location and status of the IP radios can be automatically updated every 15 seconds, and the latest information can be obtained with each call. It is also possible to retain all log data for one year.

●D-9301 (D9301) is a 900MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the splitter does not provide isolation for transmission and reception, please use it only for antenna coupling. ●The supported frequency range is 850 to 940MHz. ●The connector on the antenna side is NP, and the connector on the radio side is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact our company.*

The BK-32ZR (BK32ZR) is a mounting bracket for CS and BS antennas manufactured by Nippon Antenna. It is used to install satellite antennas under 50 cm on railings, grids, and walls. It complies with RoHS directives. *For more details, please feel free to contact our company.

●D-1501 (D1501) is a 150MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. ●The supported frequency range is from 140 to 170MHz. Please specify the center frequency (fo) in MHz when placing your order. ●The coaxial cable length is 1950mm. ●The connectors are NP on the antenna side and NJ on the radio side. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact our company.*

● TRS3G (TRS-3G) is a camera tripod mounting base manufactured by Daiwa Radio Industry (Diamond Antenna) (limited production gold model). ● It is used for camera tripods during mobile operation of radios. ● It is a bracket for attaching mobile antennas that require grounding to camera tripods. * The grounding effect increases the longer the ground wire is in contact with the ground. If the ground wire is elevated from the ground or deployed on a balcony, the radial effect decreases, and the SWR may not improve. In this case, increasing the number of ground wires or lengthening the ground wire can help. When installed on a balcony, connecting the ground wire to the railing may improve the situation. ● TRS3G is the gold version of TRS3. The antenna base has a gold texture. ● It is compatible with 1/4 inch camera screws. ● It uses a gold plating that is resistant to peeling. ● Comes with MJ-MJ connectors and a 20cm 3D-2V coaxial cable. ● Complies with the European environmental regulation RoHS directive. ● It is a limited production product. * For more details, please feel free to contact us.