中央電機計器製作所 List of Products and Services

This is a compact-sized outlet box (distribution board). It has been improved to be more compact than traditional outlet boxes. With a size similar to that of a desktop PC, it can effectively utilize space on-site. AC100V is input from the main power panel and output to each outlet (front and bottom of the panel) via an NFB. 【Features】 - Equipped with a ground fault detection circuit If a ground fault occurs between the "L phase or N phase of AC100V and ground" of each connected device or power strip, a buzzer sound, LED flashing, and disconnection of the relevant NFB will occur. - This allows for quick identification of the connection point where the ground fault has occurred. - In the event of the main unit tipping over, the NFB lever is designed not to be damaged.

• Power distribution and control panels

This is a system that monitors the values of load cells at both ends of the cable and automatically collects data under set conditions. <Host PC> - Waveform monitoring - Downloading collected data - Setting various conditions PXI <Real-Time Target> - Monitoring data from load cells and optical scale sensors - Synchronized data collection based on set conditions - Operates independently from the host PC

• Other Software

This is a device that captures and inspects the roundness of measured objects using two optical systems. ● The inspection process takes a long time. ● It is difficult to sort out defective products. ● We want to prevent misjudgments. 　　　　　⇓ To solve these issues, we recommend inspections using this product. We have a track record of deliveries to manufacturers handling spherical objects, so we can provide specific proposals and advice based on actual examples. 【Features】 - The major axis of the measured object can be changed using a jig attached to the parts feeder section. - After judgment, sorting is possible using an air-based sorting function. - Approximately 180 judgments can be made per minute. - Capable of measuring various spherical objects: ceramic balls, bearing balls, pearls, etc.

• Other Software

This is a system capable of testing large capacity loads such as power cables. It can also perform impulse voltage application tests, twisting tests, and tests for large capacity loads. The system configuration has been completely renewed while maintaining the functionality of measuring instruments from about 30 years ago. 【Features】 - Capable of outputting surge waveforms with a maximum of 100Vpp and pulse widths from 5us to 400us - New functions "Software-controlled time constant adjustment" "Touch panel adoption" "Time constant setting storage"

• others

This is a device for automatic inspection of defects (dents, bulges, discoloration) on the surface of metal plates. ◆ Significantly reduces inspection time by replacing visual inspections! ◆ Achieves high efficiency in the process through automation of the inspection procedure. ◆ Illuminates the workpiece with built-in lighting on the inspection device and detects reflected light with a camera (acquires a bright field image) to detect defects and identify their locations through image processing. ◆ The surface shape of detected defects can be measured in detail using a three-dimensional shape measuring device. ◆ Equipped with a vacuum chuck and air blow function for dust removal. ◆ Proven capability to handle super-large workpieces (metal plates measuring 10m in length and 2m in width)!

• Other Software

This is a device that detects whether a rare short circuit has occurred due to insulation damage between copper wires by applying voltage between copper wires wound together with different types of insulated copper wire. By simply applying voltage to the device, it enables short circuit detection of flat rectangular wires. It contributes to reducing testing time, cutting costs, and predicting short circuit accidents in advance. *Flat rectangular wires are mainly used in oil-filled large transformers and switchgear. Our rare tester is a device that tests the insulation/short circuit status between multiple physically separated flat rectangular wires. (It cannot test the insulation/short circuit of a single coil winding.)

• Other Software

Are you facing any of the following issues with the aging update of testing, measurement, and control equipment? - There are no design documents left. - There is no one left who understands the equipment in question. - It is difficult to manufacture in-house, and you don't know where to outsource. - The company that previously manufactured for you has withdrawn. - The measuring instrument currently in use has been discontinued, and you don't know what to replace it with. If you have any of these concerns, our company can help you! Even if there are no documents left, we can inspect the equipment and provide proposals and manufacturing. First, our sales team will visit you, and if necessary, our engineers will follow up.

• Other Software

This is a unit that synchronizes a multi-channel (64ch) D/A to output current. It is ideal for experimental setups that apply current synchronously to multiple small loads (such as LEDs and semiconductor devices).

• others

Multi-channel (voltage and distortion) synchronized data acquisition Immediate display of test results through computational functions after measurement Various graph displays by selecting arbitrary acquired data

• IoT

In recent years, there has been a growing need to address the demand for durability testing due to the increase in idling stop requirements. Would you like to reduce the time spent on automation and analysis of operations with the introduction of a starter durability testing device? 【Features】 - Data after analysis can be automatically saved to a PC - Automation of all inspections exceeding 50 items - Ability to move to the next test immediately after error detection - Engine speed, starter speed, motor current, starter motor input signal, and contact signal can all be analyzed and displayed in a single graph.

• IoT

Here we introduce element technologies based on our achievements. 〈Hardware〉 Electrical and electronic circuit design (analog circuits, digital circuits, electrical circuits) Control (actuators, motors, robots, measuring instruments, stage control) Image processing, circuit and mechanism design (camera, lens, lighting mechanism design and assembly) Enclosure design, 2D/3D/CAD design (enclosures, jigs, measurement rack design, etc.) Printed circuit board design and implementation Assembly, wiring, enclosure processing, metal and resin processing Calibration of measuring instruments 〈Software〉 ◆Development languages: LabVIEW, C/C++, .NET (VB, C#, VC) PLC ladder (Mitsubishi, Omron, Keyence, Yaskawa) Python, FPGA (LabVIEW, Verilog, VHDL), Web (LabVIEW NXG, JavaScript), Database (SQL Server, Access, MySQL) ◆System and software design: UML, networks, databases, cloud, AI ◆Measurement and control: Data collection, synchronized input/output of multiple signals, communication ◆Equipment and control: Stage, robot, actuator, motor control

• IoT

It is a device that automatically conducts tests by applying signals and loads to the test motor. It collects signals from various sensors and evaluates the performance of the motor.

• others

Isn't it true that the input and output signals required for various sensor measurements are diverse? Our data acquisition system consolidates various types of signals into a single device for collection. The types of input and output signals and the number of channels can also be customized according to your requirements.

• IoT

You can easily conduct tests by inserting the relay into the socket and simply pressing the start button on the screen. Multiple relays can be tested simultaneously, and the results for each measurement item will be displayed for each relay. The measurement of all items can be completed in under a few dozen seconds, contributing to the efficiency of operations.

• Other measuring instruments

This is an appearance inspection software that utilizes AI anomaly detection technology. It can handle the appearance inspection of a wide variety of workpieces, including metal processed products, films, resin molded products, and printed materials. (Examples: scratches, foreign objects, chips, color unevenness, missing characters, etc.) By combining it with industrial robots and other equipment, it achieves a reduction in manual visual inspections. 【Features】 - Can learn only from images of good products (images of defective products are not required) - Visually clear and easy-to-use screen design

• IoT

This is a testing device that applies vibrations to products to investigate their effects. When machinery breaks down, it can lead to enormous costs and time for repairs, as well as the worst-case scenario of profit loss due to equipment downtime. To prevent machine failures before they occur, we recommend inspections using the vibration testing device. We also have a track record of supplying to major machinery manufacturers, allowing us to provide specific proposals and advice based on real examples. 【Features】 - Adjustable settings for swing angle, frequency, number of cycles, and number of steps - Switching between pitch direction and yaw direction depending on how the specimen is mounted - Additional functions can be added according to your requirements through the use of PLC - Comfortable operation with a handy touch panel - Capability to obtain output data from the specimen (optional)

• Other Software

This is a system that performs autonomous driving necessary for evaluating transient characteristics by rapidly controlling the engine and eddy current dynamometer's rotational speed and load based on driving patterns. 【Features】 - High-precision measurement and control are possible by using a real-time OS. - Switching between automatic and manual driving allows for automatic and manual measurements. - Long-duration operation is possible with autonomous driving, making it suitable for durability testing applications. - Engine torque and output characteristics are measured through throttle control and dynamometer load control. - It is possible to create and edit arbitrary driving patterns, enabling the collection of engine characteristics for various purposes such as steady-state operation evaluation and transient characteristic evaluation. - Driving patterns learned from measurement results are automatically generated for more precise operation. - Measurement results can be output as a report in Microsoft Excel format.

• Other Software

This is a system that automatically conducts shipping inspections for heavy machinery ECUs (Electronic Control Units). 【Features】 - Allows batch registration of multiple ECUs for inspection - Automates all inspections exceeding 50 items - Reduces the workload for inspectors (only cable reconnections required) - Automatically outputs inspection results to a report (Excel file)

• IoT

This is an application that reads scanned image data (such as JPEG, PNG, BMP, TIFF) and generates DXF data for use in CAD. It significantly reduces the unnecessary time and costs of manually creating CAD drawings from scratch using calipers or measuring tapes. 【Features】 - The application can be used simply by installing it on a PC. - There is no need to create CAD drawings from scratch, allowing for a streamlined design process. - Even in cases where there are no drawings (only physical prototypes), CAD data can be generated from the actual object! - DXF data can be freely edited in CAD software that allows for editing (output format: DXF data). - It can output data as vector (coordinate information of shapes) rather than raster (dot-drawing data).

• Other CAD

This is an appearance inspection software that utilizes AI object detection technology. It is capable of inspecting the appearance of a wide variety of workpieces, including metal processed products, films, resin molded products, and printed materials. (Examples: scratches, foreign objects, chips, color unevenness, missing characters, etc.) By combining it with industrial robots, it achieves the automation of visual inspections.

• Other Software

We provide appearance inspection software that utilizes AI image recognition technology. It is capable of inspecting a wide variety of items, including metal processed products, films, resin molded products, and printed materials. (Examples: scratches, foreign objects, chips, color unevenness, missing characters, etc.)

• Other Software

The SmartEdge series is a two-dimensional automatic measurement device for dimensions that has been adopted by customers in various industries, including punching processing, polarizing plates, and electronic and electrical materials. Among them, the most popular tabletop model is compact yet capable of measuring up to A2 size (measurement range: 570×420mm). We have compiled examples of product usage and customer feedback from both domestic and international users. Please take a look at the catalog download. ★Features of the SmartEdge Series★ ✓ Significant reduction in measurement time compared to manual methods with device implementation ✓ Both measurement and recording can be automated, increasing efficiency and eliminating transcription errors ✓ Standardization of quality inspection methods is possible by introducing the same device at multiple locations! ✓ Remote maintenance (remote support service) is available ✓ The measurement field can be customized by changing the lens magnification ✓ Stage size can be changed (with proven results up to a maximum width of 4m!) ✓ High-speed (reduced tact time) and high-precision operation with linear motor drive! ✓ Customization options available, such as adding a suction mechanism ✓ By changing the lighting, even the cutting edge can be viewed! ✓ Simple thickness measurements can also be made possible through customization!

• Other Software

The SmartEdge series is a two-dimensional automatic dimension measurement device that has been adopted by various customers in industries such as blade manufacturing, punching processing, battery manufacturing, and textiles, both domestically and internationally. We have gathered examples of cases that accommodate special sizes and products, along with customer feedback. Please take a look at the catalog download. ★Features of the SmartEdge Series★ ✓ Significant reduction in measurement time compared to manual work with device implementation ✓ Both measurement and recording can be automated, increasing efficiency and eliminating transcription errors ✓ Standardization of quality inspection methods is possible by introducing the same device at multiple locations! ✓ Remote maintenance (remote support service) is available ✓ The measurement field can be customized by changing the lens magnification ✓ Stage size can be changed (with proven results up to a maximum width of 4m!) ✓ High-speed (reduced tact time) and high precision with linear motor drive! ✓ Customization options such as adding a suction mechanism are available ✓ By changing the lighting, the cutting edge can also be viewed! ✓ Simple thickness measurement is made possible through customization!

• Other Software

The "3D Image Inspection System" is a three-dimensional image inspection system for three-dimensional structures. Using sensors mounted on a robotic arm, it can automatically recognize the position of the inspection target without the need for teaching and perform inspections at necessary locations. The image processing employs a special shooting method, allowing for image processing even for inspection targets that are difficult to recognize with standard photography. 【Features】 ■ Automatic recognition of the inspection target's position without teaching ■ Capability to perform inspections at necessary locations ■ Support for products that are difficult to capture with standard photography ■ Inspection possible after converting to clear images using proprietary image processing technology ■ Customization of the entire system enables application to various products *For more details, please refer to the related link page or feel free to contact us.

• Other Software

The "Digital Meter (7-Segment Display) Automatic Reading System" is a system that captures images of the values displayed on digital displays of measuring instruments and control panels using a camera, recognizes the characters, and converts them into data. It is possible to provide proposals tailored to customer needs, such as analysis of quantified values and data acquisition at regular intervals. This system can eliminate inspection omissions, transcription errors, and data tampering. [Features] - Automates tasks previously performed by humans - Achievable at a reasonable cost - Software development can be customized - Automates the management of various meters - Reduces costs for routine inspections *For more details, please refer to the related links or feel free to contact us.

• IoT

We would like to introduce feedback from customers who have actually implemented the SmartEdge series. "We received feedback such as, 'The device has a simple function and can be handled by beginners, so we were able to start measuring from the implementation day with just half a day's training,' and 'It can accommodate warping of large workpieces (equipped with a suction mechanism).'" For more details, please check the related links. 【Customer Feedback (Partial)】 - Both hardware and software are consistently manufactured, so after-sales support was solid. - It can accommodate warping of large workpieces (equipped with a suction mechanism). - The price and specifications matched well (the balance between price and specifications is excellent). - The time for re-manufacturing blade types was reduced. *For more details, please refer to the related links or feel free to contact us.

• IoT

The "SmartEdge GS2-HLS6560" is a dimensional automatic measurement device equipped with a linear motor, enabling high-speed and high-precision measurements. Due to its high measurement accuracy, it is suitable for measuring products cut with high-precision blades such as pinnacle blades, rather than those cut with Thomson-type blades. By changing to four-directional lighting as an option, it also allows for the measurement of blade types such as Thomson blades and corrosion blades. 【Features】 ■ High-speed measurement of up to 1,000mm/sec due to the adoption of a linear motor ■ Ideal for measuring workpieces with strict tolerances due to high measurement accuracy ■ Camera movement without confusion thanks to the map function ■ Easy operation by selecting icons on the screen ■ Measurement of blade types such as Thomson blades and corrosion blades is possible with four-directional lighting *For more details, please refer to the related links or feel free to contact us.

• Other Software

The "SmartEdge Series" is a two-dimensional automatic measurement device that automatically measures the dimensions of thin materials such as films and sheets. It uses a non-contact method with a camera, making it easy for anyone to use. Once the measurement points are programmed during the initial setup, only mouse operations are needed thereafter. With a rich lineup, we can provide tailored suggestions based on your needs, and for items not in the lineup, we can accommodate custom-made solutions. 【Features】 ■ Intuitive and easy-to-understand operation by simply selecting icons on the screen ■ High-resolution images are obtained through the use of a 1/1.8 CCD (2 million pixels) and high-resolution telecentric lenses ■ Easily move the camera to the desired location by importing drawings or photos of the workpiece and clicking on the screen ■ With tilt correction functionality, you can rest assured even if the workpiece is placed at an angle *For more details, please refer to the related links or feel free to contact us.

• IoT

The "Analog Meter Value Reading System" is a system that captures analog meters on measuring instruments and control panels with a camera, detects the angle of the needle, and outputs the value digitally (data conversion). It enables data conversion even for older models of measuring instruments and meters that have difficulty with digital output. By automating the visual confirmation and transcription tasks that were previously performed by humans, it helps reduce human errors. 【Features】 ■ Enables data conversion even for older models of measuring instruments and meters that have difficulty with digital output ■ Automates visual confirmation and transcription tasks that were previously performed by humans ■ Contributes to the reduction of human errors ■ Software development can be tailored to meet customer needs ■ Achievable at a reasonable cost *For more details, please refer to the related links or feel free to contact us.

• others

Scanner-type Automatic Dimension Measurement Device Model: SmartEdge S-CN4030 (Work Size: 400×300mm) This is a scanner-type automatic dimension measurement device that allows for measurement with a single click. It can measure thin workpieces up to A3 size. (Precision sheet metal (molds), printed circuit boards, various films, etc.) It is suitable for customers who often measure unique items rather than measuring large quantities of the same item! 【Features】 ■ One-click measurement without the need for teaching ■ Optional lighting allows for measurement of cutting edges (die edges) ■ Measurement of any desired location is also possible ■ Capable of measuring up to A3 size ■ Contributes to operational efficiency by allowing batch measurement of multiple workpieces ■ Once scanned, measurements can be taken at any time later *For more details, please contact us.

• others

Large Stone Surface Plate Dimension Automatic Measurement Device SmartEdge Model: GS-HLS180120G (Work Size: 1,800×1,200mm) Since it uses a stone surface plate, it allows for gentle expansion and contraction, enabling stable measurements. There are numerous implementation records with optical film manufacturers for large televisions. Suction plates can also be upgraded as an option. 【Features】 ● Stable measurements possible due to the use of a stone surface plate ● Full-surface suction mechanism can be equipped, allowing for accurate measurement of curled workpieces ● Numerous shipping records to overseas (including CE mark achievements) ● Achievements of up to 1800mm×1200mm ● Custom sizes are available.

• Other measuring instruments

2.5-Dimensional Automatic Measurement Device Model: SmartEdge GS2-HLS150120MH (Work Size: 1,500×1,200mm) In addition to 2D measurement of flat workpieces like films, it can easily measure the thickness and height of the workpieces. Measurements can be taken anywhere on the workpiece, allowing for measurement of areas that cannot be measured with a micro gauge, beyond just the periphery of the workpiece. By combining with four-directional lighting, it is also possible to measure the height and dimensions of the cutting edge of a die. 【Features: Height measurement function is standard equipment!】 ● In addition to standard 2D measurements, it can measure the height of the workpiece in microns. ● It can measure areas that cannot be measured with a micro gauge (not only near the edge of the workpiece but also in the center). ● Usable for various types of products such as dies (Thomson blades), resin molded products, and metal processed products. ● The low-contact pressure sensor does not damage the workpiece.

• others

For over 90 years since our founding, we have continued to challenge ourselves to create unique solutions that address our customers' issues, specializing in the fields of testing, measurement, and control. As an alliance partner of National Instruments (NI) in the United States, we have over 20 years of experience in system integration (SI) centered around LabVIEW for testing, measurement, and control systems. We provide comprehensive support for development, design, and manufacturing, from single items to mass production, covering hardware, software, and even mechanical aspects.

• Electrical Equipment Testing
• Other Software

Equipped with intuitive and easy-to-understand operability, it can quickly and easily handle the measurement of one-of-a-kind items. The measurement of mass-produced items remains as simple as before, allowing anyone to measure in the same way, repeatedly. It is a tabletop model that takes up relatively little space, yet can measure up to A3 size. *Custom options are available for any work size! 【Features】 ■ The initial program allows anyone to perform the same measurements afterward. ■ Improved accuracy compared to conventional models with a 2-megapixel camera and high-resolution lens. ■ Tabletop model capable of measuring up to A3 size. *Larger sizes can also be accommodated with custom orders. ■ Measurement results are automatically generated, eliminating transcription errors. ■ Automatic measurement reduces time and improves work efficiency! ■ Intuitive operation with just a push of an icon, making it easy for anyone. ■ Optional lighting allows for the measurement of blade edges (die cuts) as well. *For more details, please contact us.

• Distance measuring device/length measuring device

Isn't it cumbersome to check the operational status of devices by going to the site? The "Custom Remote Monitoring System" allows you to check measurement data from scattered testing devices and the status of processing machines in real-time using your regular PC or tablet. We can assist you with everything from signal collection to smartphone app development, so please feel free to contact us when needed. 【Features】 ■ Real-time monitoring is possible ■ Leads to improved work efficiency and productivity ■ Comprehensive consultation available from signal collection to smartphone app development - Discussion on the signals to be acquired / selection of sensors to be used / cloud / web app development, etc. *For more details, please refer to the related links or feel free to contact us.

• Other Software

This is a two-dimensional inspection device using a high-resolution camera and a high-precision X-Y stage. It is suitable for inspecting surface scratches and foreign objects on optical films, sheets, and touch panels, as well as for defect inspection. With an optical resolution of "1.8μm," it enables very high-definition inspections. It can also accommodate dimensional measurements and inspect two-dimensional punched products. 【Features】 - Automatically saves inspection data and images - Camera resolution: 9 million pixels - High optical resolution (1.8μm) allows for clear viewing of fine inspection areas - Ideal for inspecting peripheral electrodes of touch panels and disconnections or short circuits in fine wiring of printed circuit boards *For more details, please download the materials or contact us.

• others

Equipped with a linear motor, it enables high-speed and high-precision measurements. 【Features】 ■ Ultra-fast movement speed! Thanks to the adoption of a linear motor, high-speed measurements of up to 1,000 mm/sec are possible! ■ Ultra-fast teaching! Intuitive and easy-to-understand operation by simply selecting icons on the screen! By importing drawings or photos of the workpiece and clicking on the screen, the camera easily moves to the desired location! Measurement results are available on the spot, making it ideal for small-batch production of various types! ■ Ultra-fast yet high precision! By using a 1/1.8 CCD (2 million pixels) and high-resolution telecentric lenses, high-definition images can be obtained! *For more details, please download the materials or feel free to contact us.*

• Other measuring instruments

The SmartEdge series is a two-dimensional automatic measurement device that automatically measures the dimensions of thin materials such as films and sheets. It uses a non-contact method with a camera, making it easy for anyone to use. Once the measurement points are programmed during the initial setup, only mouse operations are needed thereafter. With a rich lineup, we can offer proposals tailored to various applications, and for items not in the lineup, we can accommodate custom-made solutions. **Features** - Intuitive and easy-to-understand operability by simply selecting icons on the screen - High-resolution images are obtained through the use of a 1/1.8 CCD (2 million pixels) and high-resolution telecentric lenses - Easily move the camera to the desired location by importing drawings or photos of the workpiece and clicking on the screen - With tilt correction functionality, you can rest assured even if the workpiece is placed at an angle *For more details, please refer to the related links or feel free to contact us.*

• others