セキュリティハウス List of Products and Services

■Interference Prevention The registration method for the touch switch (transmitter) has two options to prevent interference. ■ Pairing Mode: Register the transmission ID of the transmitter to the receiver (only compatible between DAW-71 and DAW-31) ■ Select Switch Mode: Same channel code setting as conventional devices ■Check Reception Status The reception status can be confirmed by the color of the LED on the receiver, whether it is off or on. ■Improved Environmental Resistance DAW-71 (transmitter): IPX3, DAW-81 (receiver): IPX7. ■Antibacterial Specification The touch plate section has been made antibacterial. Additionally, the displayed text will not disappear. ■Simple Design The touch plate section features a simple design with a luxurious feel and easy-to-read text. ■User-Friendly Design ● Maintains compatibility with conventional products (DAW-1, 3, 5, 7, 70 series) ● The operation indicator LED changes from off to blinking to notify when it's time to replace the battery. ● The transmitter uses two readily available AA batteries.

• Security Sensor Systems
• Security devices

■ Interference Prevention The registration method for the touch switch (transmitter) has two options to prevent interference. ■ Pairing Mode: Register the transmitter's transmission ID to the receiver (only compatible between DAW-71 and DAW-31). ■ Select Switch Mode: Same channel code setting as conventional devices. ■ Check Reception Status You can check the reception status by the color of the LED on the receiver, whether it is off or on. ■ Improved Environmental Resistance DAW-71 (transmitter): IPX3, DAW-81 (receiver): IPX7. ■ Antibacterial Specification The touch plate section is now antibacterial. Additionally, the displayed text will never disappear. ■ Simple Design The touch plate section features a simple design with a luxurious feel and easy-to-read text. ■ User-Friendly Design ● Maintains compatibility with conventional products (DAW-1, 3, 5, 7, 70 series). ● The operation indicator LED changes from off to blinking to notify when it's time to replace the battery. ● The transmitter uses two readily available AA batteries.

• Security Sensor Systems
• Security devices

■Miniaturization of the receiver By miniaturizing, we can make more effective use of the limited space within the automatic door engine. ■Interference prevention feature Using the 2.4GHz frequency band, we send signals from 3 channels in sequence to ensure reliability and prevent interference.

• Security Sensor Systems
• Security devices

■Miniaturization of the Receiver By miniaturizing, we can make more effective use of the limited space within the automatic door engine. ■Miniaturization of the Transmitter Due to its thinness, there are fewer restrictions on installation locations. ■Clarification of the Operation Indicator Light The operation indicator light on the transmitter (DAW-100) has been made brighter than previous models, making it easier to confirm operation. ■Interference Prevention Function Using the 2.4GHz frequency band, signals are sent in sequence across 3 channels to ensure reliability and prevent interference. ■Improvement of Operability ● A hand mark has been added to the operation panel to clarify the position for operation. ● The tactile feedback when touching has been enhanced for a better click sensation.

• Security Sensor Systems
• Security devices

■Miniaturization of the receiver By miniaturizing, we can make more effective use of the limited space within the automatic door engine. ■Miniaturization of the transmitter Due to its thinness, there are fewer constraints on installation locations. ■Clarification of the operation indicator light The operation indicator light has been made brighter than conventional models, making it easier to confirm operation. ■Interference prevention function Using the 2.4GHz frequency band, signals from 3 channels are sent in sequence to ensure reliability and prevent interference. ■Improvement of operability ● A hand mark has been added to the operation section, clarifying the position for operation in the panel design. ● The click sensation felt by the hand upon touch has been enhanced.

• Security Sensor Systems
• Security devices

■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for automatic door activation. *Be cautious of the installation environment, as irregular walls may cause reflections that can reduce sensitivity.

• Security Sensor Systems
• Security devices

■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the installation height of the sensor to establish a stable area. ●The microcontroller automatically controls radio waves, wind, and external noise to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for activating automatic doors. *If there are uneven walls or similar features in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity, so please be cautious of the environment.

• Security Sensor Systems
• Security devices

■Features ● This safety sensor is ideal for ensuring safety around circular doors due to its three-dimensional area. ● The microcontroller automatically assesses the surrounding environment and the height at which the sensor is installed during initial setup, establishing a stable area. ● Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ● Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. * Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or an automatic door activation sensor. * If there are uneven walls or similar features in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity, so please be cautious of the environment.

• Security Sensor Systems
• Security devices

■Features ●This safety sensor is ideal for ensuring safety for circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the sensor installation height to establish a stable area. ●Radio waves, wind, external noise, and temperature changes are all continuously controlled by the microcontroller for optimal operation. *Please note that it cannot be used as a security sensor or an automatic door activation sensor, as monitoring operation starts with an external activation input (voltage-free contact). *If there are uneven walls in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity.

• Security Sensor Systems
• Security devices

■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places where hygiene is a concern, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.

• Security Sensor Systems
• Security devices

■Features ● The door opens by waving your hand without touching the main unit, making it ideal for places that require hygiene considerations, such as food processing facilities and hospitals. ● Compatible with single-unit recessed switch boxes.

• Security Sensor Systems
• Security devices

■Hygienic Non-Contact Method Ideal for facilities that require special hygiene considerations, such as food factories, pharmaceutical factories, and hospitals, as it outputs signals without touching the switch. It is particularly suitable for places like food processing plants and hospitals where hygiene is a priority. ●Compatible with single-unit embedded switch boxes *HACCP Compliant The main body cover is made of stainless steel and features a design that minimizes dust accumulation. *HACCP: An international standard that defines the requirements of a food safety management system. ■Waterproof Structure It has an IPX3 equivalent structure, which means it can withstand splashes of water during cleaning in food factories without any issues. ■Built-in Sensitivity Volume Can be set to the optimal distance according to the detection range (0 to 200mm). ■Integrated Controller The controller function is built-in, making installation simple.

• Security Sensor Systems
• Security devices

■Features ● It outputs a signal by waving your hand without touching the main unit, making it ideal for hygienic environments such as food and pharmaceutical factories and hospitals. ● The angle of the beam switch can be adjusted not only to face forward and downward but also to the left and right. ● The main unit is white, giving it a clean appearance, and the arrow mark clearly indicates where to wave your hand. ● The IP55 design ensures waterproof and dustproof construction. ● It can be installed on a single switch box (pitch 72.5–83.5mm). ■ Three patterns for the angle of the beam switch: front, downward, and left/right The position of the traditionally fixed beam switch can be changed. ■ White color enhances cleanliness The main unit is white, enhancing cleanliness and blending well in any environment. ■ The area to wave your hand is prominent The arrow mark makes it easy to identify where to wave your hand.

• Security Sensor Systems
• Security devices

■Operating Principle Pulsed modulated infrared light is continuously emitted from the light-emitting sensor, and the light-receiving sensor captures the weak infrared light that reflects off objects. The controller amplifies this input signal and performs synchronous detection to monitor the presence of reflective objects. ■Main Features ● The angle of the sensor body can be adjusted arbitrarily, allowing for a preferred reflection area. ● The door remains open while receiving reflected infrared light, ensuring safety. ● The light-emitting and light-receiving sensors are integrated, making wiring simple. ● It operates stably without being affected by external disturbances such as sunlight or lighting.

• Security Sensor Systems
• Security devices

■Usable ambient temperature supports down to -25℃ This is a control panel for an infrared beam switch with a heater that can be used as a supplementary light beam to prevent pinching in automatic doors and shutters in cold regions and freezing warehouses. ■Heater-equipped sensor unit The waterproof heater-equipped sensor unit reduces malfunction due to condensation and fog in freezing warehouses, as well as ice formation and snow accumulation in cold regions. ■Power supply voltage supports a wide range The power supply voltage supports a wide range of AC100 to 200V. ■Detection distance The detection distance is up to 10 meters. ■User-friendly design ● By adding the optional sensor unit BS-10NH, it can support dual light beams. ● The wiring code for the emitting side is 15m, and the wiring code for the receiving unit is 10m, allowing the sensor connection code to be cut to fit the installation environment. *The sensor unit is sold separately.

• Security Sensor Systems
• Security devices

■Features This unit is a sensor unit with a heater-equipped infrared beam switch that can control the movement of a sheet shutter (1 beam opposing type, 10m). By combining it with the separately sold heater-equipped infrared beam switch controller DS-HC, control of the sheet shutter becomes possible. By installing the sensor unit near the sheet shutter, it can detect and output the stopping or passing of people and vehicles. Additionally, since it has a built-in heater, it can reduce malfunctions caused by condensation, freezing, or snow accumulation.

• Security Sensor Systems
• Security devices

■Features This device is a controller that can control the movement of a sheet shutter. When combined with the separately sold heater-equipped infrared beam switch sensor unit BS-10NH (up to 2 beams), it enables control of the sheet shutter. By installing the sensor unit near the sheet shutter, it can detect and output when a person stops or passes through the opening and closing area. Additionally, the sensor unit has a built-in heater to reduce malfunctions caused by condensation, freezing, or snow accumulation. When using 2 beams, the adoption of a scanning method prevents mutual interference between the two beams.

• Security Sensor Systems
• Security devices

■Features ● Reduces malfunctions caused by "condensation or fogging in low-temperature warehouses or freezing warehouses" or "freezing or snow accumulation in cold regions." ● The sensor head is waterproof, allowing installation in places prone to condensation, such as low-temperature warehouses, freezing warehouses, or semi-outdoor areas. ● The design minimizes heat transfer from the heater to the sensor mounting plate. ● Detection distance of up to 10 meters. ● High-reliability design that is minimally affected by external light disturbances such as sunlight. ● Convenient operation indicator light for operation confirmation (green LED: always on, turns off during detection). ● With dimensions of W: 45mm H: 94mm D: 29mm, it is a compact controller that is easy to install inside door engines. ● The connection cables for both the light-emitting and light-receiving parts can be freely cut according to installation conditions. ● It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

■Features This device is a controller that can control the movement of automatic doors. By combining it with the separately sold sensor unit BS-6N, it becomes possible to control the automatic door. By installing the sensor unit near the automatic door, it can detect and output when a person stops or passes through the opening and closing area. Additionally, it is equipped with two types of outputs: contact output and counter output, allowing it to interact with external devices such as visitor counters.

• Security Sensor Systems
• Security devices

■Two power sources tailored to your needs You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response speed switching function included In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim sensor head can be installed with one touch The sensor head for 10m detection adopts a one-touch installation type that only requires drilling a hole and pushing it in, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● Highly reliable design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared one-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Operation indicator light for convenient operation confirmation (Red LED: always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Two Power Sources for Different Applications You can choose between two types of power sources, 100V and 200V, depending on the situation of the electric shutter being installed. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be mounted simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that allows you to adjust to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared one-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the emitter and receiver can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed anywhere within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and the option to add a sensor head later to use it as a double beam if needed. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Security Sensor Systems
• Security devices

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed anywhere within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam, with the option to add a sensor head later to use it as a double beam if needed. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Security Sensor Systems
• Security devices

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ● Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ● Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Operation indicator light for convenient operation confirmation (Green LED: always on, turns off during detection)

• Security Sensor Systems
• Security devices

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ● Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ● Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that allows for optimal sensitivity adjustment based on the installation distance. ■User-friendly design ● Highly reliable design that is hardly affected by external light disturbances such as sunlight ● Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam, with the option to add sensor heads later to use it as a double beam if needed. ■Adoption of scanning method The adoption of a scanning method ensures there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the upper and lower light emitters and receivers during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Security Sensor Systems
• Security devices

■Realization of compact controller Achieved a compact controller size of W: 45mm H: 120mm D: 29mm. It does not limit the installation location even within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial use as a single beam and the option to add sensor heads later to use it as a double beam if necessary. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, it is not necessary to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Security Sensor Systems
• Security devices

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as was done traditionally. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and later expansion to a double beam by adding a sensor head if needed. ■Adoption of scanning method The adoption of a scanning method ensures there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

• Security Sensor Systems
• Security devices

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It does not require a specific installation location within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine. ■Can also be used as a single beam It can be used as a single beam initially, and if necessary, additional sensor heads can be added to use it as a double beam. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

• Security Sensor Systems
• Security devices

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting part and the light-receiving part can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off during detection)

• Security Sensor Systems
• Security devices

■Realization of compact controller It is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ● Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ● Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

• Security Sensor Systems
• Security devices

■Output Assurance It is equipped with outputs from both microwave and infrared sensors, making it suitable for various applications. "Output 1 is a relay output" and "Output 2 is an open collector output." ■Features of Microwave It is less affected by snow and rain, allowing for use in outdoor locations. ■Mode Switching Function The comprehensive output (Output 1) can switch modes. 1) Microwave or Infrared 2) Microwave only *The output from the infrared sensor can operate independently (Output 2). ■Direction Discrimination Function It can detect movement towards the sensor while non-detecting movement away from the sensor. ■Infrared Area There are 32 detection spots: 12 (1st row) + 12 (2nd row) + 8 (3rd row). (Depth 1.25m × Width 3.2m at 3.2m) ■Microwave Area It secures a wide area of 2.5m × 4.0m at 2.2m.

• Security Sensor Systems

■Direction Detection Function ● It is an optimal direction detection sensor using microwaves for activating vehicle exit warning lights. ● It is also capable of detecting the direction of pedestrians, so it can be used for applications such as detecting only entrants and activating camera recording. ■Convenient One-Sided Wiring ● By installing just one unit on one side, it allows for direction detection of vehicles, making it highly efficient for installation. ■Rainproof Structure ● It has a rainproof structure, allowing it to be used outdoors as is. (Sealant is required for the wiring hole) * There may be malfunctions during heavy rainfall. * It is recommended for use in environments where vehicles pass through in a straight line. * If there is a tendency for vehicles to approach the sensor from a distance, false detection may occur.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

■High-altitude installation type capable of long-distance detection With a maximum installation height of 6m, it can detect over long distances, making it ideal as a sensor for large factory doors and sheet shutters. (Recommended installation height: 3m to 6m) ■Arrangement of high-density detection patterns An area of four rows in depth, including right in front of the door, has been arranged, with each row having six zones, ensuring that intruders from the side of the door and people standing near the door rail are reliably detected. ■Microcontroller-based control system ●Limited stationary detection Can be set arbitrarily from "2 seconds / 15 seconds / 60 seconds / 180 seconds." ●Interference prevention function Even if multiple sensors are installed in narrow areas such as airlocks, the infrared frequency can be switched, preventing mutual interference. ■Outdoor installation capable Achieves IP55 waterproofing suitable for outdoor use. ■Adjustable to any angle With a swivel mechanism, angle adjustments can be made freely, allowing for the optimal detection area to be set. Additionally, the optical area can be switched to three patterns based on the installation location using dip switch settings.

• Security Sensor Systems
• Security devices

■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can be up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By combining the new insect mode with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutter way function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutter way can be established, enhancing safety. ■Detection area setting function The depth area can be set from 5 columns to 1 column, and the width area can be independently adjusted left and right, allowing for the deletion of detection areas for the two outer spots, enabling fine area settings tailored to the site.

• Security Sensor Systems
• Security devices