セキュリティハウス List of Products and Services

■Main Features ● When the switch is pressed, the occupancy lamp lights up, and it outputs 2 contact points accordingly. Pressing it again turns it off and reverses the 2 contact point output. It can be incorporated into a living safety notification system for use. ● Brightness can be switched between 2 levels. ● Original design with a color that is easy for elderly individuals with glaucoma to see (when lit). ● You can freely write on the nameplate (e.g., "Lights on when occupied," "Press," etc.). ● Suitable for a single switch box.

• Security Sensor Systems
• Security devices

■ Waterproof structure push button switch The push button switch (TB-B) has a waterproof structure, allowing it to be installed in various locations such as toilets, bathrooms, rehabilitation rooms, hallways, and private rooms. ■ Can be connected to any display panel It has a non-voltage contact output (a contact), so it can be connected to any display panel, including channel display panels. ■ Push button for toilets and bathrooms - Pressing the "call button" or pulling the cord will trigger the output. - It displays a lamp with DC12V power supply. - It can be used even without supplying power (DC12V). ■ Can be embedded in walls It is compatible with a single switch box, allowing it to be embedded in the wall.

• Security Sensor Systems
• Security devices

Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm2 ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor/semicovered (places not directly exposed to rain)

• Security Sensor Systems
• Security devices

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

• Security Sensor Systems
• Security devices

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire length: 50cm ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

• Security Sensor Systems
• Security devices

■Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor / semi-outdoor (places not directly exposed to rain)

• Security Sensor Systems
• Security devices

■Features ●Compatible with single switch boxes ●Contact output: No-voltage a contact (DC30V, 0.3A or less) ●Water resistance: JIS C0920 protection grade 6 ●Installation location: Indoor

• Security Sensor Systems
• Security devices

■Features ● Used for calling the living safety system, resetting sensors, and displaying or resetting the toilet usage notification system ● Integrated lamp and switch (independent connection) ● Dedicated to DC12V ● Outputs c contact when the button is pressed (with recovery/RESET indication) ● It is also possible for the lamp to light up when pressed, depending on the wiring ● Compatible with single switch box

• Security Sensor Systems
• Security devices

■Features ● Used for calling the living safety system, resetting sensors, and resetting the toilet usage notification system ● Pressing the button outputs a c contact (with recovery/RESET indication) ● Compatible with single switch box

• Security Sensor Systems
• Security devices

■Features ● Used for calling the living safety system, resetting sensors, and resetting the toilet usage notification system ● Pressing the button outputs a c contact (with recovery/RESET indication) ● Compatible with single switch box

• Security Sensor Systems
• Security devices

■Features ● When a card or business card is inserted, it outputs a non-voltage contact (c contact). ● Connects to the Living Safety Alarm SAH-2(S) and is used as a Living Safety System. ● If you attach the room key to the card, it will turn OFF when you take the card out when going out, and turn ON when you return home and put the card back. ● Suitable for a single switch box.

• Security Sensor Systems
• Security devices

■Features ● With the latch output switch, pressing the button lights up the call lamp and outputs c contacts ×2. Pressing it again turns off the lamp and reverses the output. The switch status can be determined by the lamp's on/off state. It can be used in an emergency call system. ● Since it outputs 2c contacts, two systems can be configured. ● Original design with a color that is easy for elderly people with cataracts to see (when lit). ● You can freely write on the nameplate (e.g., "Press," "Emergency," etc.). ● Suitable for a single switch box.

• Security Sensor Systems
• Security devices

■Main Features ● The door can be opened and closed simply by inserting your foot, making it ideal for hospital operating rooms and similar environments. ● The embedded box is compatible with a 3-gang switch box, allowing for easy installation. ● The controller has a compact size of W: 45mm H: 94mm D: 29mm. It can be installed in various locations even as a separate unit. ● The exterior is made of stainless steel (SUS304HL), enhancing durability. ● Custom dimensions are also available. Please contact us separately for inquiries. ● For surface mounting, we offer a surface box (FRB-02) (optional, open price).

• Security Sensor Systems
• Security devices

■Features ● Instead of manually pressing switches as before, this can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-type pedal that detects pressure from either side. ● Comes with a "protective cover" to prevent accidental activation due to falling objects.

• Security Sensor Systems
• Security devices

■Main Features ● It can open and close automatic doors without touching the main unit, making it ideal for environments that require hygiene considerations, such as food factories and hospitals. ● The adoption of microwave technology significantly reduces malfunctions caused by condensation in environments with temperature differences, such as cold storage. ● The detection status can be easily confirmed at a glance through LED displays and response sounds. ● Output can be set in two patterns: one-shot and latch output. ● Compatible with a single switch box (JIS standard) for installation. ● Designed to be washable with an IP55 equivalent rating. (The wall and back are not applicable.) ● With a thickness of 22mm, it does not create a sense of incongruity when placed alongside other devices. * Continuous detection of stationary objects is not possible. * Do not place moving objects within the detection area, as this may cause malfunctions. * If the unit is installed on a metal wall, the detection distance may be reduced.

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Security Sensor Systems
• Security devices

■Features ● The settings for DA-3600 and DA-4000 require DSY and a smartphone, etc. ● Up to 16 sensors can be connected with one setting unit. ● If monitoring is to be done continuously with a tablet, DSY will be permanently installed. ● If only device settings are needed, it will be removed after the settings are completed. Notes ◆ About the setting software ◆ The setting software can only be used with smartphones and tablets (Android type). Since the app is compressed in a zip file, please unzip it using a zip extraction app before use.

• Security Sensor Systems
• Security devices

■72 optical spots can be set You can set detection and non-detection for 72 optical spots on a per-spot basis, allowing for area security settings tailored to the site. Additionally, detection spots can be divided into four groups, each with adjustable sensitivity and output time settings. ■Settings via dedicated software The settings for the main unit are performed by connecting to an optional setting unit DSY (sold separately) and a device such as a smartphone or tablet running Android 2.2 or higher with a dedicated app installed via Wi-Fi. The detection status can be viewed in real-time, ensuring accurate area settings. There is also no need to work at heights. (Please download the dedicated software from our website.) ■Interference prevention function With four interference prevention modes, the same sensor can be installed in close proximity without malfunctioning. ■Environmental settings Environmental settings can be adjusted in four stages, which helps reduce false detections from snow, insects, and other factors.

• Security Sensor Systems
• Security devices

■72 detection spots can be set The sensor can be configured with 72 detection spots divided into four groups, and one detection spot can be changed to a non-detection area. In the four groups, sensitivity settings, hold time settings, output time settings, and noise environment settings can be configured individually. *Settings are done using a smartphone or tablet. ■Function settings can be done via smartphone Various settings for functions and sensors are performed using Wi-Fi communication on a smartphone or tablet with Android 2.2 or higher installed. (Please download the dedicated app from our website.) This allows for safer operations at heights, as only the installation of the equipment is required. (A separate setting unit DSY is needed for configuration.) ■Eco function Detection is not activated in the horizontal direction, while detection occurs in the direction towards the sensor, and the output time is shortened in the direction away from the sensor, reducing unnecessary openings and closings. ■Output settings Output can switch between contact a and contact b, and in the case of contact b, it operates in fail-safe mode (open during power failure).

• Security Sensor Systems
• Security devices

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Main Unit (DX-S35F) ●Detects objects through direct reflection using a phase difference method. ●Achieves a detection accuracy of 3m. ●Equipped with an anti-interference function. Up to 4 units can be connected. ●There is also a connection cable available in 5m specification "DX-S35F-Y5". *When used for a visitor counter, please use it with a single optical axis setting. Storage Attachment ●Can be mounted not only on walls but also on poles.

• Entrance/exit management and personal identification system

■Features ● Detects objects through direct reflection using a phase difference method. ● Achieves a detection accuracy of 3m. ● Equipped with an anti-interference function. Up to 4 units can be connected. ● There is also a 5m connection cable model "DX-S35F-Y5". *When used at a visitor counter, please set it to a single optical axis.

• Entrance/exit management and personal identification system

■Features ●Embedded infrared sensor for visitor counters (real-time output type) ●Compact and slim sensor head allows for installation in minimal space. ●Ultra-compact controller ●Detection distance can reach up to 6m. (With optional item BS-10N, it can reach up to 10m.)

• Entrance/exit management and personal identification system

■Features ● Analyzes the position, speed, size, quantity, and trajectory of objects within the detection range to count more accurately. ● One sensor can accommodate ceiling heights (2.5 to 4.5m) and detection widths (2.5 to 4.5m). ● Capable of directional counting. ● Up to 7 child units can be connected in parallel to one master unit, allowing for coverage of wide openings. ● Ceiling-mounted installation is possible without compromising the store's image. * An optional surface mount base (IWC500W) or an embedded mount base (IWC510W) is required.

• Entrance/exit management and personal identification system

■Features ● Infrared sensor for customer counters with a detection range of 5m (real-time output). ● It is a reflective sensor with an integrated light-emitting and light-receiving unit, allowing for wiring work only on the main unit side, which enhances maintainability. ● It uses a retroreflector, allowing for an incident angle of infrared rays of up to 30° (±15°). ● Compatible with all of our customer counter products.

• Entrance/exit management and personal identification system

■Features ● It distinguishes between entrants and exits based on sensor signal input and displays the number of people remaining. ● When operating at AC100V, it outputs power for the sensor (DC24V 450mA). ● It can provide two points (two stages) of alarm output. For example, when the number of remaining people reaches 10, it triggers the first output, and when it reaches 20, it triggers the second output. This can be combined with audio alarms, rotating lights, and flashlights to notify the surroundings. ● Program modifications can be made to suit the site. *Note: If there are changes to the operating specifications, a separate estimate will be provided. *The number of remaining people that triggers the first and second outputs will be specified at the time of order. Installation Locations Places where people gather, such as zoos, exhibition halls, and supermarkets.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Visitor Count Since two sensors can be installed, the total count for two gates can be recorded. *Individual counting for each gate is not possible. ■Direction Detection for Visitor Entry and Exit By using two sensors, it is possible to determine the direction of visitor entry and exit. ■Visitor Height Detection By installing two sensors vertically, it is possible to determine the height of visitors. ■Access via Network, Usable from Headquarters and Other Locations An environment tailored to customer needs can be easily constructed and operated. ■Aggregation by Custom Groups (up to 5 groups) Aggregation can be done not only by store unit but also by floor or area. ■Data Collection Every 5 Minutes, Aggregation Possible in 15-Minute Intervals The minimum time unit is 15 minutes. Aggregation can be done by time, day, week, month, year, and day of the week. ■Aggregation Software The aggregation software is included with the main unit. ■Multiple Gates For multiple gates, please use the gate addition unit (P3-PCT-AD).

• Entrance/exit management and personal identification system

■Easily and effectively grasp the number of visitors The visitor counter counts the number of attendees using sensors installed near the entrance and exit gates without causing discomfort to visitors. It can be easily installed using the facility's columns and walls, eliminating the need for large-scale construction, making it suitable for banks, department stores, government offices, libraries, theaters, and more. Understanding previously unseen numbers Automatically aggregates the number of people entering and exiting Utilizes the flow of people for effective marketing strategies ■Counts up to 8 gates (8 sensors). ■In addition to 1/1 and 1/2 counts, it can also count the number of entrants and exits with direction detection (up to 4 gates for direction detection). ■By setting effective time periods, it can count only during necessary hours, such as business hours. ■Equipped with a power supply for the sensors (DC12V/1A). ■Analysis data of visitor numbers by time period, monthly, etc., using the included aggregation software can be utilized for marketing. ■The aggregation software allows for the printing of daily, monthly, and annual reports.

• Entrance/exit management and personal identification system

■Features ● This device automatically counts the number of visitors using sensors installed near the gate. ● It can count visitors for up to 4 gates. ● It can display the count for each of the 4 gates as well as the total count for all 4 gates. * The display for the 4th channel can switch between the total count and the individual count. ● The internal switch allows for switching between 1/1 and 1/2 counting modes. ● It can be wall-mounted, allowing for installation without compromising aesthetics.

• Entrance/exit management and personal identification system

■Easily and effectively grasp the number of visitors The visitor counter counts the number of attendees using sensors installed near the entrance and exit gates without causing discomfort to visitors. It can be easily installed using the facility's columns and walls, requiring no major construction, making it suitable for use in banks, department stores, government offices, libraries, theaters, and more. ■Understanding previously unseen numbers Automatically aggregates the number of customers entering and exiting Utilizes the flow of people for effective marketing strategies ■Switchable counting methods (1/1 count, 1/2 count) are available. In 1/2 count mode, it can display a count of 1 for one entrant and one exit, indicating the visitor count. ■There are 4 channels for signal input, allowing for individual channel displays as well as a total display for all channels. ■In the event of a power outage, the count (last value) is retained. ■Count reset can be done individually or collectively. ■Equipped with a power supply for the sensors (DC12V/300mA).

• Entrance/exit management and personal identification system

■Features 1. Contact conversion device equipped with four modes 【Cloud Reporting Mode】 (Uses cloud service) - Sends contact signals such as equipment abnormalities to the server and reports via voice or email. - Allows viewing of reporting history from PCs or smartphones. 【Cloud Visitor Counter Mode】 (Uses cloud service) - Sends contact signals to the server and aggregates counts for each contact on the cloud server. - Allows viewing of aggregated results from PCs or smartphones, and enables the creation of daily, monthly, and yearly reports. 【Annual Timer Mode】 - Operates contacts based on a custom schedule. - Allows registration of 20 patterns (operations) for each day of the week. - Allows registration of up to 50 specific days (such as holidays). 【Contact Transmission Mode】 - Outputs input signals from contacts to another device installed at a different location via the network. - Enables monitoring of alarm information from remote equipment. 2. Simultaneous contact output is possible for input signals, allowing control of deterrent devices on-site.

• Entrance/exit management and personal identification system

■Features ● This is a contact input unit that sends sensor signals to a cloud server. ● The application on the server side aggregates visitor counts. (Reports can be generated for specific dates, monthly, and annually.) ● Aggregated data can be viewed from anywhere with an internet connection. ● The server system is "Gateway Counter" (manufactured by Excite Corporation). (A licensing agreement is required for each terminal.) *Additional server usage fees will apply.

• Entrance/exit management and personal identification system

● Standalone operation is possible without a PC. ● Authentication methods include facial recognition, fingerprint recognition, card authentication (FeliCa, MIFARE), and PIN code, with mixed operation also possible. ● The maximum number of registrable individuals is 500,000: - Facial recognition: 7,000 for 1:N authentication, 100,000 for 1:1 authentication. - Fingerprint recognition: 100,000 for 1:N authentication, 500,000 for 1:1 authentication. - Cards and PIN codes can be registered up to 500,000 entries. ● Each user can select their authentication method, and AND authentication using face, fingerprint, card, and PIN code is possible. ● With the infrared camera and infrared lighting (LED), facial recognition can be performed in lighting environments from 0 lx to a maximum of 30,000 lx, allowing installation in various locations. ● It can prevent misrecognition caused by counterfeit fingerprints or images such as photographs. ● The LCD touch panel allows for easy operation while viewing guidance for settings and registrations. ● With the separately sold management software (UNIS), settings, registration information, and history for up to 1,000 terminals can be centrally managed from a single computer.

• Entrance/exit management and personal identification system

■Features ● Standalone operation is possible without a PC. ● Authentication methods can be selected from fingerprint recognition, card recognition (FeliCa, MIFARE), and PIN code, allowing for mixed operation. ● The maximum number of registrable users is 20,002. Fingerprints can be registered for 15,000 in 1:N authentication, and 20,002 in 1:1 authentication. Cards and PIN codes can be registered up to 20,002 entries. ● Each user can choose their authentication method, and AND authentication using fingerprint, card, and PIN code is possible. ● The LCD touch panel allows for easy operation while viewing guidance for settings and registrations. ● With the separately sold management software (UNIS), configuration information, registration information, and history for up to 1,000 terminals can be centrally managed from a single computer. ● The management software includes a desktop fingerprint and card reader. ● It can control electric locks when combined with an electric lock control panel.

• Entrance/exit management and personal identification system

■Features ● This is a rain cover specifically designed for the voice-enabled non-contact card switch ACS-112 and the card reader ACS-TMR with a dedicated keypad. ● It can be used in locations where it may be exposed to rain under eaves. ● Card verification can be performed from above the front panel. * Our handled cards and tags, including [ACS-FLcard], [ACS-FLST], [NT-5000C], and [NT-5000K], have been confirmed to work.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Features ● This is a tag exclusively for FeliCa IDm. ● It is compatible with card readers that use the FeliCa standard, including 【ACS-102F】【ACsmart】【FC-100】. ● Made from durable PC resin, it meets protection rating IP65 (dustproof and water jet resistant). It has a robust construction. ● The dimensions are W32×H56×D8mm, making it a convenient size that can be used with various commercially available keychains.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system

■Features ● The 【ACS-FMI】 has revamped its voice message content for security-related applications, providing situational voice guidance to prevent operational errors. ● It features a clean design that matches well with the popular ACsmart card reader. * When connecting and operating the security button unit 【ACS-KBU】, the ACS-Client software version 3.0.0.0 or later is required. * When connecting and operating the security button unit 【ACS-KBU】, the ACS-C controller must be version V0302 (LOT No. 3031) or later. * The security button unit 【ACS-KBU】 is exclusively for use with the card reader 【ACS-FMI】. Please note that it cannot be combined with 【ACS-FR】.

• Entrance/exit management and personal identification system

■FeliCa/Mifare/I-CODE Compatible Compatible with FeliCa/Mifare/I-CODE cards. Supports both fixed reading mode for each card and multi-read mode. ■Sophisticated Design Card Reader The compact ACS-DHR features a novel design where the surroundings light up blue during card verification. The ACS-FMI has a refined design that lights up entirely in blue during card verification. The ACS-TMR is a slim design card reader with a keypad. ■Feature-Rich Keypad Card Reader The keypad card reader ACS-TMR can operate with three verification methods: "Card only," "PIN only," and "Card + PIN," allowing for mixed operations. ■Protection Rating IPX5 The card readers ACS-DHR and ACS-BLR have a protection rating of IPX5, making them suitable for installation in locations exposed to direct rain, such as building exteriors. ■Security Set/Reset By combining the optional security button unit [ACS-KBU] with the ACS-FMI, it can operate as a local security system.

• Entrance/exit management and personal identification system

For more details, please refer to the basic information.

• Entrance/exit management and personal identification system