セキュリティハウス List of Products and Services

■ Door and Window Sensor Transmitter ● It comes with a switch that staff or family members can use to turn it on and off. ● It can be easily installed on sliding doors or hinged doors (screws and double-sided tape included). ■ It includes double-sided tape that "leaves no residue after removal." This allows for easy installation and removal without damaging the installation surface. ● The transmitter is powered by batteries, so there is no need for electrical work. ● It uses a dedicated lithium battery for long life (approximately 8 years with 20 transmissions per day). ■ Tabletop Receiver ● When it receives a signal from the transmitter, it alerts you with a gentle melody (chime sound) and a flashlight. ● You can choose from 8 different melodies (chime sounds). ● The alert duration can be selected from 7 options ranging from 3 seconds to 120 seconds, including continuous mode. ● Easy installation! Just place it on a table and plug the AC adapter into an outlet to use. Relay Unit (Optional) RTXF-300 It relays low-power radio waves, extending the transmission range up to 100 meters in line of sight. Multiple relay units can be added as needed.

• Security Sensor Systems
• Security devices

■Purpose and Operation ● Elderly individuals who tend to wander will carry a transmitter. ● The access call receiver-transmitter installed at the exit will receive the signal from the transmitter and, when the motion sensor detects movement, will send a low-power radio wave to notify the receiver within 100 meters. ■Set Products: Two Types of Receivers ■ We offer two types of receivers to suit different purposes. ■ The radio waves can be registered in advance, allowing for immediate use. ● ACW-S(T) Desktop Receiver Set (AC-T + AC-2WM + HC-350) ■ You can choose from 8 different melodies or chimes, and it will visually notify you with a flash light. The notification time can be selected from 3 seconds to 120 seconds in 7 options, including "continuous." ● ACW-S(KE) Portable Receiver Set (AC-T + AC-2WM + RXF-60K) This is rechargeable and comes with a dedicated charger. It is ultra-compact, palm-sized. It can notify you with a buzzer sound and a vibrator. You can choose the notification time (20 seconds / 2 minutes / 5 minutes / 10 minutes). It features an easy-to-understand LCD display that can optionally show a 3-digit channel number.

• Security Sensor Systems
• Security devices

■Purpose and Operation ● Elderly individuals who tend to wander will carry a transmitter. ● The access call receiving transmitter installed at the exit will receive the signal from the transmitter and, when the motion sensor detects movement, will send a low-power radio signal to notify the receiver within 100 meters. ■Set Products: Two Types of Receivers ■ We offer two types of receivers to suit your needs. ■ The radio frequency is pre-registered, allowing for immediate use. ● ACW-S(T) Desktop Receiver Set (AC-T + AC-2WM + HC-350) You can choose from 8 different melodies or chimes, and it visually notifies you with a flash light. The notification time can be selected from 3 seconds to 120 seconds in 7 options, including "continuous." ● ACW-S(KE) Portable Receiver Set (AC-T + AC-2WM + RXF-60K) This is rechargeable and comes with a dedicated charger. It is ultra-compact and palm-sized. It can notify you with a buzzer sound and a vibrator. You can choose the notification time (20 seconds / 2 minutes / 5 minutes / 10 minutes). It features an easy-to-read LCD display with an optional 3-digit channel indicator.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the bed sensor transmitter "TX-BS3" and the tabletop receiver "HC-350"/portable receiver "RXF-60K." It is pre-registered for radio frequency settings so that it can be used immediately. ● The bed sensor is placed under the sheets or futon. ● When the user gets up from the bed, it transmits a signal, which is received by the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as in reinforced concrete buildings.) ● The bed sensor is an integrated unit with a detection part and a transmission part, making it easy to install and carry. ● It has a wake-up time setting function, allowing for operation tailored to the user. ■Bed Sensor Transmitter ● The wake-up judgment time can be set to one of eight options (1 to 8 seconds). ● The pause timer temporarily halts operation (for about 5 minutes). ● The sensor part is a high-sensitivity, thin type with a thickness of 4mm (size: 250mm x 800mm). ● It features a "non-slip back" and "string threading hole" to prevent slipping. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the bed sensor transmitter "TX-BS3" and the tabletop receiver "HC-350"/portable receiver "RXF-60K." It comes pre-registered for immediate use. ● The bed sensor is placed under the sheets or futon. ● When the user gets up from the bed, it transmits a signal, notifying the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as in reinforced concrete buildings.) ● The bed sensor is an integrated unit with a detection part and a transmission part, making it easy to install and carry. ● It features a wake-up time setting function, allowing operation tailored to the user. ■Bed Sensor Transmitter ● The wake-up judgment time can be set to one of eight options (1 to 8 seconds). ● The pause timer temporarily halts operation (for about 5 minutes). ● The sensor part is a high-sensitivity, thin type with a thickness of 4mm. (Size: 250mm x 800mm) ● It has "anti-slip backing" and "string threading holes" to prevent slipping. ● The battery life is approximately 2 years with 10 transmissions per day (using two AA alkaline batteries). ● It has a simple waterproof structure.

• Security Sensor Systems
• Security devices

■Usage and Operation ●It is used by placing it under the sheets or under the futon. ●Please use it for those who have difficulty getting up from or leaving the bed. ●It wirelessly notifies a receiver 100 meters away when getting up from the bed. ■Bed Sensor Transmitter ●The time to determine getting up can be set in 8 different ways (1 to 8 seconds). ●The pause timer temporarily halts operation (for about 5 minutes). ●The sensor part is a high-sensitivity, thin type with a thickness of 5mm (size: 250mm x 800mm). ●It comes with "non-slip backing" and "string threading holes" to prevent slipping. ●The battery life is about 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ●It has a simple waterproof structure. ●Non-slip bed sensor ●The transmitter and detection parts are integrated, allowing for easy transport without tangled cords. ■Radio Wave Characteristics ●The transmission range of the transmitter is approximately 100 meters in line of sight. It can be easily installed in homes or places without existing nurse call systems. ●The radio waves are pre-registered, so it can be used immediately.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the mat sensor transmitter and the tabletop receiver "HC-350" / portable receiver "RXF-60K". ● It is pre-registered for radio transmission settings so that you can use it immediately. ● When the mat sensor is stepped on, it transmits a signal, and the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Mat Sensor Transmitter ● It has a user-friendly size of 400mm x 800mm. ● It has a pause timer that temporarily halts operation (for about 5 minutes). ● When the battery level is low, both the transmitter and receiver will notify you. ● It is a high-sensitivity, thin type with a thickness of 6mm, and the backside is treated with a non-slip finish to prevent slipping on the floor. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure. ■Selectable "Receiver" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies you with a gentle melody (chime sound) and a flashlight. ● You can choose from 8 different melodies (chime sounds). ● The notification time can be selected from 3 seconds to 120 seconds in 7 variations, as well as continuous notification.

• Security Sensor Systems
• Security devices

Features ● This is a combination product of the mat sensor transmitter and the tabletop receiver "TX-M48" / portable receiver "RXF-60K". ● The radio frequency registration settings are pre-configured for immediate use. ● When the mat sensor is stepped on, it transmits a signal, and the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as in reinforced concrete buildings.) Mat Sensor Transmitter ● It has a user-friendly size of 400mm x 800mm. ● It features a pause timer that temporarily halts operation (for about 5 minutes). ● When the battery level is low, both the transmitter and receiver will notify you. ● It is a high-sensitivity, thin type with a thickness of 6mm, designed with a non-slip surface on the back to prevent slipping on the floor. ● The battery life is approximately 2 years with 10 transmissions per day (using 2 AA alkaline batteries). ● It has a simple waterproof structure. Selectable "Receivers" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies you with a gentle melody (chime sound) and a flashlight. ● The melody (chime sound) can be selected from 8 different options. ● The notification duration can be selected from 3 seconds to 120 seconds in 7 variations, as well as continuous mode.

• Security Sensor Systems
• Security devices

■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Choose from 6 types according to your needs ■We offer standard and wide sizes for the mat sensor, and fixed, portable, and tabletop types for the receiver. We have prepared 6 types based on different combinations, so please choose according to your needs. - HS-W(T): Mat Sensor/Standard Size, Receiver/Tabletop Type - HS-W(KE): Mat Sensor/Standard Size, Receiver/Portable Type - HS-W: Mat Sensor/Standard Size, Receiver/Fixed Type - HS-W68(T): Mat Sensor/Wide Size, Receiver/Tabletop Type - HS-W68(KE): Mat Sensor/Wide Size, Receiver/Portable Type - HS-W68: Mat Sensor/Wide Size, Receiver/Fixed Type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.

• Security Sensor Systems
• Security devices

■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Six types available to choose from based on your needs ■The mat sensors come in standard and wide sizes, and the receivers are available in stationary, portable, and tabletop types. We have prepared six types by combining these options, so please choose according to your needs. - HS-W(T): Mat sensor/standard size, receiver/tabletop type - HS-W(KE): Mat sensor/standard size, receiver/portable type - HS-W: Mat sensor/standard size, receiver/stationary type - HS-W68(T): Mat sensor/wide size, receiver/tabletop type - HS-W68(KE): Mat sensor/wide size, receiver/portable type - HS-W68: Mat sensor/wide size, receiver/stationary type *This is a set of one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.

• Security Sensor Systems
• Security devices

Notification of Elderly Wandering Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. Six types available to choose from based on your needs Tabletop type: You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. The notification time can be selected from 7 options ranging from 3 seconds to 120 seconds, including a "continuous" option. Installation type: You can choose between a "hold mode" that continuously sounds and displays a lamp until reset after receiving the signal, or a "3-second mode" that ends after 3 seconds. Portable type: Compact and lightweight, rechargeable with a dedicated charger. It notifies you with three levels of volume, vibration, and an LCD display. You can select the notification time (20 seconds/2 minutes/5 minutes/10 minutes). A strap is also included. Wireless, no wiring required ● The transmission range of the transmitter is approximately 100 meters in clear sight, allowing for easy use without worrying about wiring. ● The signal is pre-registered, so you can use it immediately.

• Security Sensor Systems
• Security devices

■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Choose from 6 types to suit your needs ■We offer standard and wide sizes for the mat sensor, and fixed, portable, and tabletop types for the receiver. We have prepared 6 types by combining these options, so please choose according to your needs. - HS-W(T): Mat Sensor/Standard Size, Receiver/Tabletop Type - HS-W(KE): Mat Sensor/Standard Size, Receiver/Portable Type - HS-W: Mat Sensor/Standard Size, Receiver/Fixed Type - HS-W68(T): Mat Sensor/Wide Size, Receiver/Tabletop Type - HS-W68(KE): Mat Sensor/Wide Size, Receiver/Portable Type - HS-W68: Mat Sensor/Wide Size, Receiver/Fixed Type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.

• Security Sensor Systems
• Security devices

■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal to notify the receiver. ■Six types available to choose from based on your needs ■The mat sensors come in standard and wide sizes, while the receivers are available in fixed, portable, and tabletop types. We have prepared six types by combining these options, so please choose according to your needs. - HS-W(T): Mat sensor/standard size, receiver/tabletop type - HS-W(KE): Mat sensor/standard size, receiver/portable type - HS-W: Mat sensor/standard size, receiver/fixed type - HS-W68(T): Mat sensor/wide size, receiver/tabletop type - HS-W68(KE): Mat sensor/wide size, receiver/portable type - HS-W68: Mat sensor/wide size, receiver/fixed type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.

• Security Sensor Systems
• Security devices

■Notification of Elderly Wandering ■Please place the mat sensor near the exit. When an elderly person who tends to wander steps on the mat sensor while trying to go out, it will transmit a signal and notify the receiver. ■Six types available to choose from according to your needs ■We have prepared standard and wide sizes for the mat sensor, and installation type, portable type, and tabletop type for the receiver. We offer six types in total, so please choose according to your needs. - HS-W(T): Mat Sensor/Standard Size, Receiver/Tabletop Type - HS-W(KE): Mat Sensor/Standard Size, Receiver/Portable Type - HS-W: Mat Sensor/Standard Size, Receiver/Installation Type - HS-W68(T): Mat Sensor/Wide Size, Receiver/Tabletop Type - HS-W68(KE): Mat Sensor/Wide Size, Receiver/Portable Type - HS-W68: Mat Sensor/Wide Size, Receiver/Installation Type *This set includes one mat sensor, one transmitter, and one receiver, but additional units can be purchased separately.

• Security Sensor Systems
• Security devices

■Overview - Up to two sensors (plug type) can be connected to the Carecom 4-pin nurse call system (Type Z). - Existing handheld substation outlets and handheld substations can be used in conjunction with the sensors. - It is surface-mounted and comes with a rear magnet and hook for installation.

• Security Sensor Systems
• Security devices

■Overview ●Up to two sensors (plug type) can be connected to the Carecom 4-pin nurse call system (Type R, Type S). ●Existing handheld substation outlets and handheld substations can be used in conjunction with the sensors. ●It is an exposed type and comes with a mounting magnet and hook on the back.

• Security Sensor Systems
• Security devices

■Overview - Up to two sensor (plug type) devices can be connected to the Aiphone NFX series 6-pin nurse call system. - Existing nurse call subunits and push-button or handheld subunits can be used in conjunction with the sensors. - It features a surface-mounted design with a rear magnetic mount and hook. ■Features ● Designed specifically for Aiphone NFX series 6-pin ● Can be used in conjunction with existing push-button and handheld subunits for nurse call connection. ● Lead wire length: 1.5m ● Includes rear magnetic mount and hook for installation ● Dimensions: W40×H142.5×D25.5mm (excluding protrusions)

• Security Sensor Systems
• Security devices

■Overview - Up to two sensor (plug type) units can be connected to the Aiphone NFX series 5-pin nurse call system. - Existing nurse call sub-units and push-button or handheld sub-units can be used in conjunction with the sensors. - It is a surface-mounted type with a magnetic back for installation and a hook. ■Features ● Designed exclusively for Aiphone NFX series 5-pin ● Can be used in conjunction with existing push-button or handheld sub-units for nurse call connection. ● Lead wire length: 1.5m ● Comes with a magnetic back for installation and a hook ● Dimensions: W40×H142.5×D25.5mm (excluding protrusions)

• Security Sensor Systems
• Security devices

■Overview ● Up to two sensor (plug type) units can be connected to the Aiphone NFX series 3-pin nurse call system. ● Existing nurse call sub-units and push-button or handheld sub-units can be used in conjunction with the sensors. ● It is a surface-mounted type with a rear magnetic mount and hook included. ■Features ● Aiphone NFX series, dedicated to 3-pin connections ● Can be used in conjunction with existing push-button or handheld sub-units for nurse call connections. ● Lead wire length: 1.5m ● Includes rear magnetic mount and hook for installation ● Dimensions: W40×H142.5×D25.5mm (excluding protrusions)

• Security Sensor Systems
• Security devices

■Overview - Up to two sensors (plug type) can be connected to the Metacon 2-pin nurse call system. - Existing nurse call substation outlets and push-button switches can be used in conjunction with the sensors. - It features an exposed design with a mounting magnet and hook on the back.

• Security Sensor Systems
• Security devices

■Detection of Weight of Sleeping Person ●Place it under the sheets or mattress, and if the person gets up for more than the set time, it will detect and notify you. ●It can be connected to a nurse call sub-unit using an optional distribution outlet. ■User-Friendly Design ●The detection and setting units are integrated, and the power supply is battery-operated, making it easy to operate and handle. ●You can select the detection time for getting up from a total of 16 options (from 1 second to 30 minutes). This prevents detection of temporary getting up or turning over. ●It comes with a pause timer switch. ■When you press it during bed making or examinations, it can pause the detection function for 5 minutes. ■You can extend the timer duration by reactivating it midway. ●The battery life is approximately 1 year and 2 months with 10 notifications per day. When the battery is low, it will notify you with a flashing indicator light and a buzzer sound. ●The detection unit is a high-sensitivity, thin type with a thickness of 4mm, ensuring no discomfort during use. ●The backside is made of non-slip material to prevent slipping. It also has holes for tying to the bed for fixation. ●The lead wire incorporates "cotton thread" to withstand pulling.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the mat sensor (low-cost type) "MA-48" and the tabletop receiver "HC-350"/portable receiver "RXF-60K". ● It comes pre-registered for immediate use. ● When the mat sensor is stepped on, it transmits a signal, and the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) ■Mat Sensor (Low-Cost Type) ● It has a user-friendly size of 400mm x 800mm. ● The same material is used on both the front and back surfaces. ● The thickness of the surface material has been made thinner. ● It features a 3m cord, and the reinforcement material incorporates two strands of cotton thread, making it resistant to pulling. ● It is designed to be water-resistant for everyday life, allowing for disinfection and cleaning. ■Selectable "Receiver" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies you with a gentle melody (chime sound) and a flashlight. ● You can choose from 8 different melodies (chime sounds). ● The notification duration can be selected from 7 options ranging from 3 seconds to 120 seconds, including continuous mode. ● Easy installation! Just place it on a tabletop and plug the AC adapter into an outlet to use.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the low-cost mat sensor "MA-48," the transmitter with jack "HC-116," and the stationary receiver "HC-300." ● It comes pre-registered for immediate use. ● When the mat sensor is stepped on, it transmits a signal that is received by the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) ■Mat Sensor (Low-cost type) ● The size is 400×800, making it easy to detect and handle during movement. ● Both the front and back surfaces are made of the same material. ● The thickness of the surface material has been reduced. ● The 3m cord is reinforced with two strands of cotton thread, making it resistant to pulling. ● It is designed to be water-resistant for everyday use, and it can be disinfected and cleaned. ■Stationary Receiver It can be used immediately by simply plugging the included AC cord into an outlet. You can choose between "hold mode," which continuously sounds and displays a lamp until reset after receiving a signal, and "3-second mode," which ends after 3 seconds. ■The battery life of the transmitter is approximately 2 years.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the low-cost mat sensor "MA-48," the transmitter with jack "HC-116," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● The radio frequency registration settings are pre-configured for immediate use. ● When the mat sensor is stepped on, it transmits a signal, which is received by the receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as within reinforced concrete buildings.) ■Mat Sensor (Low-Cost Type) ● The size is 400×800, making it easy to detect and handle during movement. ● Both the front and back surfaces are made of the same material. ● The thickness of the surface material has been reduced. ● A 3m cord and reinforcement materials are incorporated with two cotton threads to withstand pulling. ● It is designed to be water-resistant for everyday use, allowing for disinfection and cleaning. ■Selectable "Receivers" <Tabletop Receiver> ● When it receives a signal from the transmitter, it notifies with a gentle melody (chime sound) and a flashlight. ● The melody (chime sound) can be selected from 8 different types.

• Security Sensor Systems
• Security devices

■Detects pressure on the mat ■By placing it beside the bed or at the entrance of the room, it is a sensor that detects a person's weight when they get out of bed (or fall) or when they attempt to leave the room. ■Basic Features ● The size is 600×1000, allowing for wide coverage beside the bed. ● It uses a gray color that matches any installation location. ● Comes with a 3m cord and pin plug. ● The pin plug is gold-plated for excellent corrosion resistance. ● It is designed to be waterproof for daily life, allowing for disinfection and cleaning. ● The lead wire exit area is bush-processed to withstand strong pulling. *Series Products* There is also the 'MA-48' with a size of 400×800. ■Can be connected to nurse call systems ■Can be connected to existing nurse call sub-units, allowing for calls to be made from the nurse call main unit. (Please use with the optional distribution outlet.) ■Low-cost type ● The same material is used for both the front and back surfaces. ● The thickness of the surface material has been reduced. ● Reinforcement materials incorporate two strands of cotton thread to withstand pulling.

• Security Sensor Systems
• Security devices

■Detects pressure on the mat ■By placing it beside the bed or at the entrance of the room, it is a sensor that detects a person's weight when they get out of bed (or fall) or when they attempt to leave the room. ■Basic Features ● The size of 400×800 is the easiest to detect and is convenient to handle during movement. ● It uses a gray color that matches any installation location. ● Comes with a 3m cord and pin plug. ● The pin plug is gold-plated for excellent corrosion resistance. ● It is designed to be waterproof for everyday use. Disinfection and cleaning are also possible (excluding the pin plug). ● The lead wire extraction part is bush-processed to withstand strong pulling. *Series Products* 　　There is also the 'MA-610' with a size of 600×1000. ■Can be connected to nurse call systems ■Can be connected to nurse call subunits using an optional distribution outlet with existing nurse call systems. ■Achieves low cost ● Both the front and back surfaces are made of the same material. ● The thickness of the surface material has been reduced. ● The material of the lead wire and the reinforcement material have been changed. 　(Contains cotton thread)

• Security Sensor Systems
• Security devices

■Detects weight pressure on the mat ■The mat sensor is placed beside the bed or at the entrance of the room to detect the weight of a person when they get off (or fall from) the bed, or when they approach the door to leave the room. ■Four sizes to suit your needs ■We offer five different sizes, including the basic M-38 and the M-4512, which covers a wider area beside the bed. ■User-friendly design ● It is a high-sensitivity, thin type with a thickness of 6mm, made from flexible materials. When combined with various receivers and displays, it alerts caregivers through alarms or indicator lights. ● The surface is designed to be flat to prevent tripping for those who wander. ● The underside uses non-slip materials to prevent shifting on the floor. ● It is waterproof for everyday use. Disinfection and cleaning are possible (excluding the pin plug). ● Comes with a 3m cord and pin plug. ● The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ● The lead wire extraction area is bush-processed to withstand strong pulling. ● The pin plug is gold-plated for excellent corrosion resistance.

• Security Sensor Systems

■Detects pressure on the mat ■The mat sensor is designed to be placed beside the bed or at the entrance of a room. It detects the weight of a person when they get off (or fall from) the bed, or when they approach the door to leave the room. ■Four sizes to suit your needs ■We offer five different sizes, including the basic M-38 and the M-4512, which covers a wider area beside the bed. ■User-friendly design ●It is a high-sensitivity, thin type with a thickness of 6mm, made from flexible materials. When combined with various receivers and displays, it alerts caregivers through alarms or indicator lights. ●The surface is designed to be flat to prevent tripping for those who wander. ●The underside uses non-slip materials to prevent shifting on the floor. ●It is waterproof for everyday use. Disinfection and cleaning are possible (excluding the pin plug). ●It comes with a 3m cord and pin plug. ●The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ●The lead wire extraction area is bush-processed to withstand strong pulling. ●The pin plug is gold-plated, providing excellent corrosion resistance.

• Security Sensor Systems
• Security devices

■Detects weight pressure on the mat ■The mat sensor is placed beside the bed or at the entrance of the room to detect the weight of a person when they get off (or fall from) the bed, or when they approach the door to exit the room. ■Four sizes to suit your needs ■We offer five different sizes, including the basic M-38 and the M-4512, which covers a wider area beside the bed. ■User-friendly design ●It is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. When combined with various receivers and displays, it alerts caregivers through alarms or indicator lights. ●The surface is designed to be flat to prevent tripping for those who wander. ●The underside uses non-slip material to prevent slipping on the floor. ●It is waterproof for everyday use. Disinfection and cleaning are possible (excluding the pin plug). ●It comes with a 3m cord and pin plug. ●The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ●The lead wire extraction area is bush-processed to withstand strong pulling. ●The pin plug is gold-plated for excellent corrosion resistance.

• Security Sensor Systems
• Security devices

■Detects weight pressure on the mat ■The mat sensor is designed to be placed beside the bed or at the entrance of a room. It detects the weight of a person when they get out of bed (or fall) or when they approach the door to leave the room. ■Four sizes to suit your needs ■We offer five different sizes, including the basic M-38 and the M-4512, which provides wider coverage beside the bed. ■User-friendly design ●With a thickness of 6mm, this high-sensitivity, slim type uses flexible materials. When combined with various receivers and displays, it alerts caregivers through alarms or indicator lights. ●The surface is designed to be flat to prevent tripping for those who may wander. ●The underside uses non-slip materials to prevent shifting on the floor. ●It is waterproof for everyday use, and disinfection and cleaning are possible (excluding the pin plug). ●It comes with a 3m cord and pin plug. ●The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ●The lead wire exit area is bush-processed to withstand strong pulling. ●The pin plug is gold-plated for excellent corrosion resistance.

• Security Sensor Systems
• Security devices

■Wandering Notification System (Determining Area) ■Connects to the Contact Call Receiver (CC-R) and Contact Call Transmitter (CC-WR). ■Determines the area to receive signals from the AND input sensor in areas where radio waves are unclear. ■Living Safety Notification System (Detects Human Movement) ■Sensors designed for elderly housing and individual rooms to ensure a safe and comfortable living environment. ■Main Features ● Compact and slim design. The white body and simple dome shape match well with healthcare facilities and elderly housing. ● Detection display uses a gentle green LED light. ● Utilizes a passive infrared method to detect human movement. (Detection sensitivity can be set to 120% to easily detect elderly individuals with lower body temperatures.) ● Uses semiconductor relays for output contacts, ensuring silent operation without noise. ● Spot-type area. *When using heat change detection sensors, it is recommended to connect two units to ensure safety in case of accidental activation.

• Security Sensor Systems
• Security devices

■Wandering Notification System (Determining Area) ■Connects to the Contact Call Receiver (CC-R) and Contact Call Transmitter (CC-WR). ■Determines the area to receive as an AND input sensor for areas that are unclear with radio waves alone. ■Life Safety Notification System (Detects Human Movement) ■This sensor is designed to ensure a safe and comfortable living environment in individual rooms, such as in senior housing. ■Main Features ●Compact and slim design. The white body and simple dome shape match well with healthcare facilities and senior apartments. ●Detection display uses a gentle green LED for a friendly image. ●Adopts a passive infrared method to detect human movement. (Detection sensitivity can be set to 120% to easily detect elderly individuals with lower body temperatures.) ●Uses semiconductor relays for output contacts, ensuring silent operation without noise. ●Spot-type area. *When using heat change detection sensors, it is recommended to connect two units to ensure safety in case of accidental activation.

• Security Sensor Systems
• Security devices

■Wandering Notification System (Determines the Area) ■Connects to the Contact Call Receiver (CC-R) and Contact Call Transmitter (CC-WR). ■Determines the area to receive as an AND input sensor for areas that are unclear with radio waves alone. ■Life Safety Notification System (Detects Human Movement) ■Sensors designed for ensuring a safe and comfortable living environment in individual rooms, such as in senior housing. ■Main Features ● Compact and slim design. The white body and simple dome shape match well with senior welfare facilities and senior housing. ● Detection indication is a gentle green LED. ● Adopts a passive infrared method to detect human movement. (Detection sensitivity can be set to 120% to easily detect elderly individuals with lower body temperatures.) ■Features of the Life Safety Notification System ● Equipped with a remote function that allows for upgrading the Life Safety Notification System. ● The set/unset status of the system can be confirmed on the sensor body (red indicator light). ● Various connected devices can be activated via remote output.

• Security Sensor Systems
• Security devices

■Wandering Notification System (Determines the Area) ■Connects to the Contact Call Receiver (CC-R) and Contact Call Transmitter (CC-WR). ■Determines the area to receive as an AND input sensor for areas that are unclear with radio waves only. *The HM-6713 is recommended for the Wandering Notification System. ■Life Safety Notification System (Detects Human Movement) ■This sensor is designed to ensure a safe and comfortable living environment in individual rooms, such as in senior housing. ■Main Features ● Compact and slim design. The white body and simple dome shape match well with elderly welfare facilities and senior housing. ● The detection indicator uses a gentle green LED. ● Adopts a passive infrared method to detect human movement. (Detection sensitivity can be set to 120% to make it easier to detect elderly individuals with lower body temperatures.) ■Features of the Life Safety Notification System ● Equipped with a remote function that allows for upgrading the Life Safety Notification System. ● The set/unset status of the system can be confirmed on the sensor body (red indicator light).

• Security Sensor Systems
• Security devices

■ "Wandering Notification" Purpose ■ Used in combination with the access call transmitter "AC-T." ■ It receives the transmitter's radio waves, and when a person enters the motion sensor area, it notifies with a flash and melody while emitting low-power radio waves. ■ Features ● It is an integrated motion sensor. The sensor allows for angle adjustment and sensitivity adjustment. ● It has a built-in low-power transmitter that notifies the receiver wirelessly. ● Notification times are 3 seconds, 10 seconds, and 30 seconds. ● It notifies with 8 types of melodies (chime sounds) and a flashlight. ● It can be installed on a wall, allowing for a closer distance to the transmitter, making it easier to adjust the sensitivity of the weak radio waves. It adopts an easy-to-adjust "16-step dial type." ● Comes with a 2m AC100V cord. *Installation height: 0.8 to 1.2m from the floor. ■ Wandering Notification Keitai-kun (Set Product) ■ There are two product numbers for the wandering notification set. ■ It is pre-registered for radio waves and can be used immediately. 1) Desktop Receiver Set "ACW-S(T)" AC-T, AC-2WM, HC-350 2) Portable Receiver Set "ACW-S(KE)" AC-T, AC-2WM, RXF-60K

• Security Sensor Systems
• Security devices

■ "Wandering Notification" purpose ■ Used in combination with the access call transmitter "AC-T." ■ It receives the transmitter's radio waves and notifies when someone enters the motion sensor area. ■ Features ● Integrated human motion sensor. The sensor allows for adjustment of left-right angle and sensitivity. ● Rainproof structure, can be installed in semi-outdoor locations. (Equivalent to IP43) ● Notification times are 3 seconds, 10 seconds, 30 seconds, or continuous. ● Notifies with 8 types of melodies (chime sounds) and a flashlight. ● Can be installed on walls, allowing for a closer distance to the transmitter, making sensitivity adjustments easier. Adopts an easy-to-adjust "16-step dial type." ● Built-in data output function for system expansion. Identifies individuals and notifies using AC-1RH. * Installation height: 0.8 to 1.2 meters from the floor. ■ Outputs 240 types of data ■ Simultaneously receives radio waves from multiple transmitters, allowing for a total output of 240 types of data. It notifies with melodies on the spot while displaying individual data on display boards such as AC-1RH or AC-30R.

• Security Sensor Systems
• Security devices

■ "Wandering Notification" purpose ■ Used in combination with the Access Call Transmitter series. ■ This is an AND-type receiver that adds the function of a human motion sensor "HM-6706" to the Access Call Receiver "AC-8R." ■ Operation and Performance ■ It receives the radio waves emitted by the transmitter and, upon entering the sensor area and detecting motion, outputs a non-voltage a contact and data. ■ It employs a passive infrared method to detect human movement. ■ Built-in data output function for system expansion (can be connected to AC-1RH). ■ 16 Address Codes ■ The receiver and transmitter can be combined in 16 different ways. By using address codes, radio interference can be prevented. ■ 15 Channel Codes ■ When data output is connected to devices like the "Access Call Display Board (AC-1RH)," individual identification can be achieved through channel number display. ■ Ceiling-type design with aesthetic consideration ■ The receiver and human motion sensor are integrated into one unit, maintaining aesthetics without compromising appearance.

• Security Sensor Systems
• Security devices

■A versatile and highly applicable system ■It outputs signals by receiving radio waves from a dedicated transmitter. By connecting the receiver to various display panels, various systems can be constructed, such as "emergency call," "wandering notification," and "newborn abduction." It can be widely used in elderly welfare facilities and hospitals. ■For "emergency call" applications in elderly housing ■It can be used for "emergency calls" in elderly housing. Even when receivers are installed in each room, setting external output channels can prevent radio interference with receivers on different floors. Additionally, in common areas (such as dining rooms), it is also possible to set it to receive signals from all transmitters. ■AND input function for "wandering notification" applications ■When using a constant oscillation type transmitter (AC-T), the detection area is unclear with radio waves alone. To clarify the detection area, it is set to receive signals only when motion sensors detect movement, and it is equipped with an AND input function to receive radio waves from the transmitter. This enables a more accurate "wandering notification" system. *Recommended connection devices: Motion sensors "HM-6806" and "HM-6706."

• Security Sensor Systems
• Security devices

■7-segment digital display ■The access call transmitter's radio waves are received by the receiver (AC-1R/AC-8R/AC-8HM/AC-2HM/AC-2R), and the transmitter data is digitally displayed on the access call display board AC-1RH. It displays using the channel code (01 to 15) set in advance by the transmitter, allowing for the identification of the transmitter that emitted the radio waves. ■Individual output is possible Individual outputs of up to 15 channels can be obtained in accordance with the overall output, enabling various controls such as connecting to a nurse call system. ■Expandable up to 3 additional units (total of 4 units) 1. It has communication functionality, allowing for expansion to a maximum of 3 locations such as the duty room, office, or nurse center. 2. There is no distinction between the main panel and sub-panel, so the receiver (AC-1R/AC-8R/AC-8HM/AC-2HM/AC-2R) can be connected to any of the 4 locations. 3. Simultaneous display and linked reset are possible. ■Usable for various applications ● It is ideal for building systems for personal identification and behavior monitoring of wandering elderly individuals in facilities for the elderly or hospitals, as well as for emergency calls and diaper sensor systems. Additionally, it is possible to confirm the current location of nurses and staff.

• Security Sensor Systems
• Security devices

■Access Call Transmitter (Push Button Type) ■The Access Call Transmitter is used in combination with the Access Call Receiver. When the transmit button is pressed, the receiver catches the transmission signal and performs the receiving action (such as ringing a chime or activating a contact). It can be used by residents of elderly housing for emergency push buttons, location confirmation, and access switches. ■Transmitter sends 240 types of signals ■It transmits a total of 240 types of signals with 16 address options and 15 channel options. ■Location confirmation and personal identification possible when combined with peripheral devices ■The dedicated receivers are AC-1R, AC-2R, AC-4R, and AC-8R. By connecting a display panel (AC-3RH, AC-1RH, AC-3M) or output panel (AC-30R) to AC-1R, AC-2R, or AC-8R, location confirmation and personal identification become possible. ■Maximum signal reach distance is 8m ■Distance can be adjusted with dedicated receivers AC-1R, AC-2R, AC-4R, and AC-8R. ■Each room receives signals individually.

• Security Sensor Systems
• Security devices

■Access call transmitter (push button type) ■The access call transmitter is used in combination with the access call receiver. When the transmit button is pressed, the receiver catches the transmission signal and performs the receiving operation (such as ringing a chime or activating a contact). It can be used by residents of senior housing for emergency push buttons, location confirmation, and access switches. ■Transmitter sends 240 types of radio waves ■It transmits a total of 240 types of radio waves with 16 address options and 15 channel options. ■Location confirmation and personal identification possible when combined with peripheral devices ■The dedicated receivers are AC-1R, AC-2R, AC-4R, and AC-8R. By connecting a display panel (AC-1RH, AC-3M) or output panel (AC-30R) to AC-1R, AC-2R, or AC-8R, location confirmation and personal identification can be achieved. ■Maximum radio wave reach distance is 8m ■Distance can be adjusted with dedicated receivers AC-1R, AC-2R, AC-4R, and AC-8R. ■Each room receives the signal individually.

• Security Sensor Systems
• Security devices

■ Access call transmitter (push-button type) ■ The access call transmitter is used in combination with the access call receiver. When the transmit button is pressed, the receiver catches the transmission signal and performs the receiving operation (such as ringing a chime or activating a contact). It can be used by residents of elderly housing for emergency push buttons, location confirmation, and access switches. ■ The transmitter sends 240 types of signals It transmits a total of 240 types of signals with 16 address variations and 15 channel variations. ■ Location confirmation and personal identification are possible when combined with peripheral devices ■ The dedicated receivers are AC-1R, AC-2R, AC-4R, and AC-8R. By connecting a display panel (AC-3RH, AC-1RH, AC-3M) or output panel (AC-30R) to AC-1R, AC-2R, or AC-8R, location confirmation and personal identification can be achieved. ■ Maximum signal reach distance is 8m ■ Distance can be adjusted with dedicated receivers AC-1R, AC-2R, AC-4R, and AC-8R. ■ Each room receives the signal individually.

• Security Sensor Systems
• Security devices

■A versatile and highly applicable system ■It receives radio waves from dedicated transmitters and notifies you. By connecting the receiver to various display boards, various systems can be constructed, such as alerts for wandering, newborn abduction, and emergency calls. It can be widely used in general households, elderly welfare facilities, and medical institutions. ■Receives four types of transmission data with individual output ■It can individually recognize and receive radio waves from up to four transmitters. The received data is notified through a combination of sound and lights with individual output. Additionally, you can select between a 3-second mode and a hold mode in the output settings. ■Four types of alert sounds ■With the channel settings of the transmitter, four types of alert sounds (ping pong, vibrating, pling, and boo) can be activated. ■Uses safe weak radio waves ■The transmission output strength of the radio waves used in the transmitter is 1/160,000 of a mobile phone and 1/16,000 of a PHS, making it very weak. It uses radio waves that have an extremely low impact on the human body and medical devices. 〈Based on numerical conversion from the "Survey Report on the Use of Mobile Phone Terminals" published by the Radio Industry Association〉

• Security Sensor Systems
• Security devices

■A versatile and highly applicable system It receives signals from dedicated transmitters and notifies users. By connecting the receiver to various display panels, various systems can be constructed, such as alerts for wandering, newborn abduction, and emergency calls. It can be widely used in elderly care facilities and medical institutions. ■Outputs 240 types of data It can simultaneously receive signals from multiple transmitters, allowing for a total output of 240 types of data. It notifies users with melodies on the spot and displays individual data on panels such as AC-1RH and AC-30R. ■Four types of alert sounds With the channel settings of the transmitter, four types of alert sounds (ping pong, buzz, pling, and boo) can be activated. ■Uses safe low-power radio waves The transmission output strength of the radio waves used in the transmitter is 1/160,000 of that of a mobile phone and 1/16,000 of that of a PHS, making it very weak. It uses radio waves that have an extremely low impact on the human body and medical devices. 〈Based on numerical conversion from the report issued by the Radio Industry Association on the use of mobile phone terminals, etc.〉 〈Usage precautions〉 The access call receiver is for indoor use only. Do not install it in places exposed to rain or high humidity.

• Security Sensor Systems
• Security devices

A security house well-versed in the latest crime trends, methods, and entry routes offers crime prevention planning. Our catalog features a wide range of security and disaster prevention systems tailored to your needs, so please use it to assist in product selection. 【Main Featured Products】 ■【Offering Box】Destruction and Theft Prevention System - Wireless System - Passive Sensor System ■【Temple Grounds】Arson Monitoring System ■【Temple Grounds】Theft Detection System - Wireless System - Passive Sensor System ■【Perimeter】Perimeter Security System - Pressure-sensitive Code Sensor - Fence Guard ■【Perimeter】Graffiti and Theft Prevention System ■【Parking Lot】Car Burglary Prevention System - Motion Sensor Light - Passive Sensor ■【Office】Intruder Detection System

• Security Sensor Systems
• Security devices
• Security cameras and surveillance systems