セキュリティハウス List of Products and Services

■ Signal input is indicated by a flashlight and melody (chime). When a signal is input from the connected device, it will be indicated by a chime sound and LED, allowing you to confirm the operational status of the connected device visually and audibly. (a contact and b contact inputs can be selected) - Alert sound: Refer to the alert sound list (can be set for each channel) ■ 5-channel individual input Each channel is equipped with an ON/OFF switch, allowing operation only in necessary locations at necessary times. ■ LED display hold/non-hold The LED can display various indications based on settings. OFF: off / Standby: green light / Input: red blinking In short-time mode, the LED can be set to hold or non-hold. ■ Output/display mode switching function You can switch between 'hold mode', which continuously outputs until the main unit's stop button is pressed, and 'short-time mode', which automatically propagates (3 seconds, 150 seconds, 30 seconds), allowing settings according to the system. ■ Check function When there is an input in the reset state, it will turn red in conjunction, allowing for loop checking. (This is the same in the case of communication connection)

• Security Sensor Systems
• Security devices

■ Signal input is notified by flashlight and melody (chime) When a signal is input from a connected device, it will notify you with a flashlight and melody (chime). You can register alert sounds and set ON/OFF for each channel. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and modes of 3 seconds, 6 seconds, 15 seconds, or 30 seconds, allowing for settings according to the system. ■ Chime and melody sounds selectable from various options There are 10 types of alert sounds combined with melodies, which can be registered arbitrarily from 1CH to 4CH. The alert (red LED blinking) will sound in conjunction. It will not sound when the volume is set to OFF.

• Security Sensor Systems
• Security devices

■Features ● A sound selected from 16 types will play when a contact input is activated. ● The sound is distinctly different from surrounding devices. ● You can choose between a hold mode and a 6-second off delay mode. ● Start and stop control can be managed via remote input. ● The tone is clear and can reach up to 75dB. ● In 6-second off delay mode, a phrase will sound 6 seconds after the input is turned off and then stop. ● Melody (chime sound) selection.

• Security Sensor Systems
• Security devices

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input Each channel can be operated with an ON/OFF switch, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display occur, allowing the operational status of connected devices to be confirmed visually and audibly.

• Security Sensor Systems
• Security devices

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input Each channel can be operated with an ON/OFF switch, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will occur, allowing the operational status of the connected devices to be confirmed visually and audibly.

• Security Sensor Systems
• Security devices

■Overview ● Used in the Life Safety Notification System. ● Connects to life safety notification devices, and will notify if the sensor does not detect for a set period of time. ■Features ● Since it uses a light beam to measure distance, it does not react to temperature changes such as heating, cooling, sunlight, or drafts. ● If the area changes continuously for more than 30 minutes, such as when items are placed, it automatically adjusts the detection height independently for each beam. ● With a standard ceiling height of 2.5m, it detects up to a height of 1.9m, so it will not detect pets, small animals, or robotic vacuum cleaners. ■Main Specifications ● A total of 7 beams can be adjusted in three levels: 0°, 3°, and 6°. ● The areas at both ends can be set in three patterns: +0.2m/active/inactive. ● The green LED display can be set to either always off or off during detection. ■Installation ● Suitable for individual living spaces in senior housing. ● Available in two types: "exposed type" for easy installation and "embedded type" that matches the installation location.

• Security Sensor Systems
• Security devices

■Overview ● Used in the Life Safety Notification System. ● Connects to life safety notification devices, and will notify if the sensor does not detect for a set period of time. ■Features ● Since it uses a light beam to measure distance, it does not react to temperature changes such as heating, cooling, sunlight, or drafts. ● If the area changes continuously for more than 30 minutes, such as when items are placed, it automatically adjusts the detection height independently for each beam. ● With a standard ceiling height of 2.5m, it can detect up to a height of 1.9m, so it will not detect pets, small animals, or robotic vacuum cleaners. ■Main Specifications ● A total of 7 beams can be adjusted in three stages: 0°, 3°, and 6°. ● The areas at both ends can be set in three patterns: +0.2m/active/inactive. ● The green LED display can be set to either always off or off during detection. Installation ● Suitable for the rooms of elderly residents living alone in senior housing. ● Available in two types: "exposed type" for easy installation and "embedded type" that matches the installation location.

• Security Sensor Systems
• Security devices

■Main Features ● It is a three-power supply system that can be used with DC12V, DC24V, and AC100V. ● It is equipped with timer output and pre-notification output. ● The output can switch between hold mode and 3-second mode. ● The status of detection (green), notification (red), and memory (red) is displayed with four types of LEDs. ● Even after the set time expires, it utilizes the notification delay function to inform with a melody for 5 minutes. ● There are two types of notification sounds, and the volume is adjustable from 0 to 80dB. ● The sensor signal input is a contact point. ■ Toilet Safety Notification ● It connects to the toilet sensor TS-7 series. ● The sensor detects when a person enters the toilet. ● It notifies the continuous usage time of the toilet (e.g., 10 minutes, 15 minutes) and the time when the toilet is not used (e.g., 8 hours, 9 hours). ● A real-time output is provided for connecting a display light. ■ Connection to Nurse Call System ● It can also be used with DC24V, allowing it to be integrated into the facility's nurse call system. ● It can be used to notify when a patient has been bedridden for longer than the set time or when they have not gotten into bed.

• Security Sensor Systems

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within the pre-set timer duration, it alerts to a change in living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Surface-Mounted and Recessed It is installed on the ceiling surfaces of hallways and living rooms used in daily life. With an elegant design reminiscent of downlights, both the surface-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color for the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output will occur 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

• Security Sensor Systems
• Security devices

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within a pre-set timer duration, it alerts to a change in living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Surface-Mounted and Recessed It is installed on the ceiling surface of corridors and living spaces used in daily life. With a sophisticated design reminiscent of downlights, both the surface-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output occurs 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

• Security Sensor Systems
• Security devices

■Overview ● The server function has been built into the main unit. ● It can be operated with just the sensor unit and a mobile device. ● It is ideal for small facilities considering a limited number of installations or customers who want to start with just one unit. ■Operation ● The sensor in the room detects the movements of users on the bed. The sensor can recognize the human body from a three-dimensional shape and make accurate judgments. ● Notifications are sent to the staff's "mobile device." They can view the screen to determine the necessity and priority of visiting the room. ● The detected data is stored in the "sensor unit" and can be checked at any time on the mobile device. 〔Detectable Actions〕 Rising, sitting on the edge of the bed, crossing the railing, leaving the bed, slipping off, entering the room, exiting, falling, curling up ■Features 〔Always Check the Room's Status〕 ● Real-time video can be checked at any time, day or night. ● Users can be monitored without waking them during sleep. ● Privacy is protected due to the silhouette images. 〔Identifying Causes of Accidents and Understanding Situations〕 ● Detection history can be saved for up to 3,000 entries per unit (when recording 10 seconds before and after).

• Security Sensor Systems
• Security devices

■Operation ● Detects the movements of users on the sensor bed in the room. ● Notifies staff on their "mobile devices." They can view the screen to determine the necessity and priority of visits. ● The detected data is sent to and stored on the "server PC," allowing for integrated management. The detectable actions are the following seven types: 1. Getting up 2. Sitting on the edge 3. Climbing over the rail 4. Leaving the bed 5. Sliding off 6. Entering the room 7. Exiting ■Sensor Accurate image analysis with minimal false alarms ● The sensor can accurately recognize the human body from three-dimensional shapes. ● There is no performance degradation even in complete darkness during sleep. ■Features Check the room's status at any time ● Real-time video can be checked regardless of day or night. ● Users can be monitored without waking them during sleep. ● Privacy is protected due to the silhouette images. ■Identification of accident causes and situation understanding ● The detection history at the time of notification (10 to 120 seconds before and after) can be checked to identify accident factors. ● 24-hour video recording (up to 3 beds simultaneously) allows for monitoring the movements of concerned users and visit situations.

• Security Sensor Systems
• Security devices

■Main Features ●The area setting remote control is specifically designed for the toilet sensor "TS-7 series." ●It can be used universally with all toilet sensors in the "TS-7 series." ●By pressing the buttons on the remote control, you can reset the area of the toilet sensor.

• Security Sensor Systems
• Security devices

■Main Features ● It is a three-power supply system that can be used with DC12V, DC24V, and AC100V. ● It is equipped with timer output and pre-notification output. ● The output can switch between hold mode and 3-second mode. ● The status of detection (green), notification (red), and memory (red) is displayed with four types of LEDs. ● Even after the set time has expired, it utilizes the notification delay function to inform with a melody for 5 minutes. ● There are two types of notification sounds, and the volume is adjustable from 0 to 80dB. ● The sensor signal input is an a contact. ■ Toilet Safety Notification ● It connects to the toilet sensor TS-7 series. ● The sensor detects when a person enters the toilet. ● It notifies the continuous usage time of the toilet (e.g., 10 minutes, 15 minutes) and the time when the toilet is not in use (e.g., 8 hours, 9 hours). ● It provides a real-time output for connecting a display light. ■ Connection to Nurse Call System ● It can also be used with DC24V, allowing it to be integrated into the facility's nurse call system. ● It can be used to notify when a patient has been bedridden for longer than the set time or when they have not gotten into bed.

• Security Sensor Systems
• Security devices

■ When the toilet is used, the toilet sensor detects it and outputs a signal. It detects whether the user is moving or stationary. If the toilet is used for a pre-set time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)", it will notify with a lamp or buzzer 5 minutes in advance. If the user does not exit the toilet or press the reset switch, it will notify family members or the management office. ■ Toilet-specific sensor Thanks to unique technology, seven light axes independently recognize the distance from the floor to the toilet seat and automatically set the initial configuration. Among the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■ Notification of prolonged use When connected to the toilet life safety notification device SAH-2(T), it will output a signal if used for longer than the set time (usage detection: OFF, 5 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it has a system UP function that notifies in advance about reporting via lamp or buzzer. ■ Installation locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.

• Security Sensor Systems
• Security devices

■Overview When the toilet is used, the toilet sensor detects it and outputs a signal. It can detect whether someone is moving or stationary. If the toilet is used for a predetermined time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)," it will notify with a lamp or buzzer 5 minutes in advance. If the user does not exit the toilet or press the reset switch at that point, it will notify family members or the management office. ■Dedicated Toilet Sensor Using proprietary technology, seven light axes independently recognize and automatically set the distance from the floor to the toilet seat. Of the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■Notification of Long Usage When connected to the toilet life safety notification device SAH-2(T), it will output a signal if the toilet is used for longer than the set time (usage detection: OFF, 15 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it includes a system UP function that notifies in advance of reporting via lamp or buzzer. ■Installation Locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.

• Security Sensor Systems
• Security devices

■Overview ■When used, the toilet sensor detects and outputs signals. ■It detects whether someone is moving or stationary. ■If used for a preset time (e.g., 10 minutes) set in the toilet life safety notification device "SAH-2(T)", it will notify with a lamp or buzzer for 5 minutes in advance. If you do not exit the toilet or press the reset switch during this time, it will notify family members or the management office. ■Distance Measurement ■Seven beams independently measure the distance to the floor and automatically set the detection output height for each. ■It detects the height from the floor. ■Area Setting Changes for the Head ■The sensor head can be adjusted in four stages from 0° to 9°, and the area settings can be selected from a total of nine patterns, including basic settings, through deletion and height changes, allowing installation in the toilet. Three Types to Choose From There are two exposed types and one embedded type available, allowing you to select a sensor that fits the installation location. ●TS-7 (Exposed Round Type) Main installation locations: Low ceiling areas, facilities for specific users (private rooms) Features: Exposed type with a small volume and surface area, dome-shaped. However, it has a black color and many window surfaces. ●TS-7U (Embedded Type) Main installation locations: New construction facilities.

• Security Sensor Systems
• Security devices

■Features ● Ideal for detecting movement for home safety alarms. ● Can be embedded in walls for a seamless installation that matches the location. ● Designed with a single area, making it suitable for use with pets. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats at ground level, making it pet-friendly. ● Utilizes infrared technology, unaffected by temperature changes. ● Compatible with single switch boxes. *Always connect the motion sensor to the receiver using an AND connection.

• Security Sensor Systems
• Security devices

■Features ● Ideal for detecting movement for life safety alert systems. ● Designed for wall mounting. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats, making it suitable for pet-friendly products. ● A type that does not make mechanical noise, suitable for installation in hallways. * Always connect the motion sensor to the receiver using an AND connection.

• Security Sensor Systems
• Security devices

■Features ● Instead of the switches that have been casually pressed by hand, this can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-style pedal that detects pressure from either side. ● Comes with a "protective cover" to prevent accidental activation due to falling objects.

• Security Sensor Systems
• Security devices

■Features ● Instead of the switches that have been casually pressed by hand, this device can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-style pedal that detects pressure from either side. ● It comes with a "protective cover" to prevent accidental activation due to falling objects.

• Security Sensor Systems
• Security devices

■For emergency calls in the bathroom or toilet ■Pull the transmitter's cord or press the transmitter's call button to alert the receiver, which will sound an alarm. ■The tabletop receiver notifies you with a flash and melody. The notification time can be adjusted. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach when a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for everyday life. ● Powered by two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless, no wiring required ■Uses low-power radio waves, eliminating the need for wiring, making it easy to install not only in the bathroom but also in various locations around the home. ■Operation ● When the pull cord is pulled or the call button is pressed, a red light flashes to notify receivers within 100m. ■Radio wave reach distance is approximately 100m in line of sight (between transmitter and receiver) ■The transmitter's radio wave reach distance is approximately 100m in line of sight. ■Distance can be extended using a relay.

• Security Sensor Systems
• Security devices

■For emergency calls in the bathroom or toilet ■Pull the transmitter's cord or press the transmitter's call button to alert the receiver, which will sound an alarm. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach when a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for daily life. ● The power source uses two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless, no wiring required ■Uses low-power radio waves, eliminating the need for wiring, allowing for easy installation in various locations within the home, not just the bathroom. ■Operation ● When the pull cord is pulled or the call button is pressed, a red light flashes to notify receivers within 100m. ■Radio wave reach distance is approximately 100m in line of sight (between transmitter and receiver) ■The transmitter's radio wave reach distance is approximately 100m in line of sight. ■Extension of radio wave reach distance ■By installing a relay unit (RTX-100), the radio waves can be relayed up to 2 times (for 2 units), extending the radio wave reach distance.

• Security Sensor Systems
• Security devices

■For emergency calls in the bathroom or toilet ■Pull the transmitter's cord or press the transmitter's call button to alert the receiver, which will sound an alarm. ■The tabletop receiver notifies you with a flash and melody. Notification time can be adjusted. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach if a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for everyday life. ● Powered by two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless and no wiring required It uses low-power radio waves, eliminating the need for wiring, making it easy to install in various locations within the home, not just the bathroom. ■Operation ● When the pull cord is pulled or the call button is pressed, a red light flashes to notify receivers within 100m. ■Radio wave reach is approximately 100m in line of sight (between transmitter and receiver) The transmitter's radio wave reach is about 100m in line of sight. Distance can be extended using a relay device.

• Security Sensor Systems
• Security devices

■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - EC-2P(T): TX-122, HC-350 set - EC-2P(KE): TX-122, RXF-60K set - EC-2P: TX-122, HC-300 set ■Transmitters that can be selected according to purpose ●TX-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure for everyday use. ●TX-122 A pendant-type transmitter (not waterproof) that sends a signal when both buttons on the sides are pressed simultaneously. ■Receivers that can be selected according to purpose ●HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification time can be selected from seven options ranging from 3 seconds to 120 seconds, including "continuous." The transmission range of the transmitter is approximately 100 meters in line of sight.

• Security Sensor Systems
• Security devices

■Emergency Call Set The emergency call set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on either side simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification time can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in an unobstructed view.

• Security Sensor Systems
• Security devices

■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - EC-2P(T): TX-122, HC-350 set - EC-2P(KE): TX-122, RXF-60K set - EC-2P: TX-122, HC-300 set ■Selectable Transmitters for Various Uses ●TX-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ●TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ●HC-350 (Tabletop Receiver) This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification time can be selected from seven options ranging from 3 seconds to 120 seconds, including a "continuous" option. The transmission range of the transmitter is approximately 100 meters in clear line of sight.

• Security Sensor Systems
• Security devices

■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on either side simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The alert duration can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in line of sight. ● RXF-60K (Portable Receiver) Compact and lightweight, rechargeable with a dedicated charger included. The radio frequency is already registered.

• Security Sensor Systems
• Security devices

■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - EC-2P(T): TX-122, HC-350 set - EC-2P(KE): TX-122, RXF-60K set - EC-2P: TX-122, HC-300 set ■Selectable Transmitters for Various Uses ●TX-110 ■A pendant-type transmitter that is easy for elderly individuals to press even in emergencies. It has a waterproof structure for everyday use. ●TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ●HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. It allows you to choose from eight melodies or chimes and visually alerts you with a built-in flashlight. The notification duration can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in clear line of sight. ●RXF-60K (Portable Receiver) Compact and lightweight, it is rechargeable and comes with a dedicated charger. The radio frequency is already registered.

• Security Sensor Systems
• Security devices

■Emergency Call Set ■The Emergency Call Set offers six combinations with two types of transmitters and three types of receivers. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) ■ It can be used immediately by simply plugging the included AC adapter into an outlet. ■ You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. ■ The notification time can be selected from seven options ranging from 3 seconds to 120 seconds, including "continuous." ■ The transmission range of the transmitter is approximately 100 meters in line of sight. ● RXF-60K (Portable Receiver) ■ Compact, lightweight, rechargeable, and comes with a dedicated charger.

• Security Sensor Systems
• Security devices

■What is an Access Call? ■It is a wireless system that can transmit signals from a transmitter to a receiver via radio waves. ■The system uses weak radio waves, with a transmission range of about 8 meters, making it suitable for situations where location identification is necessary. ■No radio wave registration is required, and there are no limitations on the number of transmitters and receivers. ■Applications and Operation ■This system is designed for use in places like senior housing, where the access call transmitter can be carried and used to call for help by pressing a button in emergencies. It is suitable for sending signals within individual rooms or when location identification is needed. (Note) (Note: Multiple receivers are required) ■Features ●It is a receiver for weak radio waves. ●It clearly notifies with a flash and melody. The melody can be selected up to 8 tones based on the channel code settings of the transmitter. ●Notification times can be set to 3 seconds, 10 seconds, 30 seconds, or continuous. ●It has a sensitivity adjustment feature that can be set to 16 levels. ●It has a rainproof structure, allowing installation in semi-outdoor areas. ■16 Code Combinations ■The receiver and transmitter can be combined in 16 different ways. Using address codes can prevent radio wave interference.

• Security Sensor Systems
• Security devices

■Easy operation with large buttons ■Adopted large push buttons that are easy to operate for the elderly. ■Up to 10 emergency contacts can be registered ■When reporting, it will redial up to 9 times to a maximum of 10 registered contacts. (Reporting ends with one answer operation from one location.) ■Optional message addition is possible ■During reporting, it will notify with an 'optional (voice recording up to 15 seconds) + fixed (about 6 seconds, selectable from 16 types)' message. ■System expansion is possible with 6 contact inputs and 2 control outputs ■It has 6 input points for reporting activation, 1 powered output for LED display, and 1 voltage-free contact output that can also be used for remote control. ■A talkable wireless push button (optional item) is available ■You can use up to 8 optional subunits 'Talkable Wireless Push Button [TPC-30]'. (Radio reach distance: approximately 20m in line of sight) ■Register 3 frequently called numbers to the one-touch button By pressing the one-touch button on the main unit, it will automatically dial without lifting the receiver, allowing for hands-free conversation directed towards the main unit.

• Security Sensor Systems
• Security devices

■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency contact or calling purposes. ●It can be used by clipping it onto items you want to be notified about when they are moved. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily installed using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of the ON/OFF status.) ●The transmitter uses two AA alkaline batteries and can last for about 5 years (if sending signals 10 times a day). It has a low battery notification feature. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip-on string has a safety feature that detaches when a certain amount of force is applied.

• Security Sensor Systems
• Security devices

■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency contact or calling. ●It can be used by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of ON/OFF.) ●The transmitter uses two AA alkaline batteries, which can last for about 5 years (if transmitting 10 times a day). It also has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip-on string has a safety feature that detaches when a certain amount of force is applied.

• Security Sensor Systems
• Security devices

■Features ● The transmitter and receiver are registered as a set with a drop detection system, so they can be used immediately. ● Install the visible string sensor in areas where you want to monitor movement or detect danger; when the string is pulled and detached, it sends a low-power radio signal to notify the receiver within 100 meters. ● Equipped with an "on/off switch," allowing staff or family members to temporarily turn off the signal transmission by switching it to "off." ● Up to 50 additional transmitters can be registered. 〈Usage Examples〉 1. Clip it to the curtain door in a senior care facility to notify when the curtain is opened or closed (clip). 2. Detect entry and exit at entrances, hallways, emergency stairs, outward-opening doors, or rooms without doors (string). 3. Attach it to the bed frame to notify when someone gets out of bed (string). 4. Clip it to pants to notify when someone stands up from a wheelchair or similar (clip).

• Security Sensor Systems
• Security devices

■Features ● The transmitter and receiver are registered as a set with a drop detection system, so they can be used immediately. ● Attach the visible string sensor to areas where you want to monitor wandering or potential dangers; when the string is pulled and detached, it sends a low-power radio signal to notify the receiver within 100 meters. ● Equipped with an "on/off switch," allowing staff or family members to temporarily turn off the signal transmission by switching it to "off." ● Up to 30 additional transmitters can be registered. 〈Usage Examples〉 1. Clip it to the curtain door in a senior care facility to notify when the curtain is opened or closed (clip). 2. Detect entry and exit at entrances, hallways, emergency stairs, outward-opening doors, or rooms without doors (string). 3. Attach it to the bed frame to notify when someone gets out of bed (string). 4. Clip it to pants to notify when someone stands up from a wheelchair (clip).

• Security Sensor Systems
• Security devices

■Detecting wandering of the elderly ■Quickly catch it ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you through a receiver set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering of the elderly is detected, the receiver installed within 100 meters alerts you with chime sounds and lamp indicators. ■Installable anywhere without location restrictions ■The sensor is battery-operated, allowing installation in places without power supply. ■Additionally, it is wireless, eliminating the need for wiring work, and it is compact and unobtrusive. ■Battery life ■The battery life of the transmitter has been extended to 1.5 times. (It has increased from 2 years to 3 years compared to conventional products, based on 100 transmissions per day.) ■Selectable receivers for various applications ●HC-350 (Tabletop receiver): ■This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. ■You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. ■The notification duration can be selected from 7 options ranging from 3 seconds to 120 seconds, as well as a "continuous" option.

• Security Sensor Systems
• Security devices

■Quickly catch wandering elderly individuals ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you through a receiver set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with chime sounds and lamp indicators. ■Installable anywhere without location restrictions ■The sensors are battery-operated, allowing installation in places without power supply. ■Additionally, they are wireless, eliminating the need for wiring work, and they are compact and unobtrusive. ■Receivers that can be chosen according to purpose ●HC-350 (Tabletop Receiver): ■This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. ■You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. ■Notification duration can be selected from 3 seconds to 120 seconds, with 7 options and a "continuous" mode. ■The transmission range of the transmitter is approximately 100 meters in line of sight.

• Security Sensor Systems
• Security devices

■Detecting wandering of the elderly ■Quickly catch it ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you through a receiver installed within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering of the elderly is detected, the receiver installed within 100 meters alerts you with a chime sound and lamp display. ■Installable anywhere without location restrictions ■The sensor is battery-operated, allowing installation in places without power. ■Additionally, it is wireless, eliminating the need for wiring work, and it is compact and unobtrusive. ■Battery life ■The battery life of the transmitter has been extended to 1.5 times. (This is an increase from 2 years to 3 years for conventional products, based on 100 transmissions per day.) ■Selectable receivers according to usage ●HC-350 (Tabletop receiver): ■This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. ■You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight.

• Security Sensor Systems
• Security devices

Quickly catch wandering elderly individuals Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you through a receiver set up within 100 meters. This helps protect the safety of the elderly and reduces the burden on their caregiving families. Installable anywhere without location restrictions The sensors are battery-operated, allowing installation in places without power. Additionally, they are wireless, eliminating the need for wiring work, and are compact and unobtrusive. Receivers can be selected according to purpose ● HC-350 (Tabletop Receiver): This tabletop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from 8 different melodies or chimes, and it visually notifies you with a built-in flashlight. The alert duration can be selected from 7 options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in clear line of sight. ● RXF-60K (Portable Receiver): This rechargeable model comes with a dedicated charger and includes a nurse call strap. It is already registered for radio transmission. It is ultra-compact, palm-sized, and can notify you using both a buzzer sound and a vibrator.

• Security Sensor Systems
• Security devices

■Quickly catch wandering seniors ■Sensors installed near exits quickly detect the movements of wandering seniors and notify you through receivers set up within 100 meters. ■This helps protect the safety of seniors and reduces the burden on their caregiving families. ■Notification through sound and light ■When a senior's wandering is detected, the receiver installed within 100 meters alerts you with a chime sound and lamp display. ■Install anywhere without restrictions ■The sensor is battery-operated, allowing installation in places without power. ■Additionally, it is wireless, eliminating the need for wiring work, and it is compact and unobtrusive. ■Battery life ■The battery life of the transmitter has been extended to 1.5 times. (This is an increase from 2 years to 3 years for conventional products, based on 100 transmissions per day.)

• Security Sensor Systems
• Security devices

■Quickly detect wandering elderly individuals ■Sensors installed near exits quickly capture the movements of wandering elderly individuals and notify you through receivers set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with melodies and flashes. ■Installable anywhere without location restrictions ■The sensors are battery-operated, allowing installation in places without power. ■Additionally, they are wireless, eliminating the need for wiring work, and they are compact and unobtrusive. ■Wandering Notification Detection Set ■We offer a lineup of combinations with two types of transmitters and three types of receivers, totaling six variations.

• Security Sensor Systems
• Security devices

■Features ● This is a combination product of the seating sensor "BSP-33," the transmitter with jack "HC-116(B)," the tabletop receiver "HC-350," and the portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) ■Seating Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) ■Dedicated Transmitter with Jack ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

• Security Sensor Systems
• Security devices

Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● It is pre-registered for radio frequency settings so that it can be used immediately. ● If the user gets off (or falls from) the wheelchair, it will notify you with a receiver installed within 100 meters. (However, the distance may be shorter depending on surrounding conditions, such as inside reinforced concrete buildings.) Seat Sensor - Daily life waterproof specification ● Detection output: No-voltage a contact (when pressed) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● External dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) Dedicated Jack-equipped Transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

• Security Sensor Systems
• Security devices

■ Door and Window Sensor Transmitter ● It comes with a switch that staff or family members can use to turn it on and off. ● It can be easily installed on sliding doors or hinged doors (screws and double-sided tape included). ■ It includes double-sided tape that "leaves no residue after removal." This allows for easy installation and removal without damaging the installation surface. ● The transmitter is powered by batteries, so there is no need for electrical work. ● It uses a dedicated lithium battery for long life (approximately 8 years with 20 transmissions per day). ■ Portable Receiver ■ It is rechargeable and comes with a dedicated charger. It is ultra-compact and palm-sized. ■ It can notify using both a buzzer sound and a vibrator. ■ You can select the notification time (20 seconds / 2 minutes / 5 minutes / 10 minutes). It features an easy-to-understand LCD display that can optionally show a 3-digit channel number. ■ Relay Device (Optional) RTXF-300 It relays low-power radio waves and transmits signals up to 100 meters in line of sight. Multiple relay devices can be added as needed.

• Security Sensor Systems
• Security devices