朝日塗工 List of Products and Services

Here is an example of an automotive-related factory located in Shizuoka Prefecture. The area is 2200m2, and the entire floor of the factory was painted. The finish turned out well, and we received very positive feedback. Please feel free to contact us when you need our services. 【Case Overview】 ■ Shizuoka Prefecture, Automotive-related Factory ■ Work Content: Floor Painting ■ Area: 2200m2 *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Here is an example of a meat processing factory located in Chiba Prefecture. Construction was carried out using the U-Crete method manufactured by BASF Japan. The image shows a thickness comparison with a cigarette box. The floor has been renovated to approximately 7mm thick, with heat resistance of about 130 degrees and high durability. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Chiba Prefecture, Meat Processing Factory *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Here is an example of a renovation project for a vinegar brewing factory located in Koto Ward. The factory floor was coated using the U-Crete method from BASF Japan. The concrete floor was carefully ground down to ensure there were no height differences with the surrounding areas. Please feel free to contact us if you have any inquiries. 【Project Overview】 ■ Koto Ward, Renovation of a vinegar brewing factory ■ Work details: Floor coating ■ Area: Approximately 100m2 ■ Heat resistance specification: Heat resistant up to 130℃ *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Here is an example of a research building from the Japan Aerospace Exploration Agency. The area is approximately 150m², and we were commissioned to paint the floors and walls. Asahi Coatings has received high praise from many customers. We will continue to strive to be a good partner for our customers, so please feel free to contact us when needed. 【Case Overview】 ■ Japan Aerospace Exploration Agency Research Building ■ Work Details: Floor and wall painting ■ Area: Approximately 150m² *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a food-related company in Tokyo and would like to introduce a case where we implemented the U-Crete method. We carried out the construction by properly performing polishing and surface preparation. Our company frequently receives requests for the U-Crete method from food-related companies and food processing factories. Please feel free to contact us when you need our services. 【Case Overview】 ■ Food-related company in Tokyo *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Here is a case study of a comprehensive academic institution in Tokyo. The flooring of the facility had deteriorated over time, and we received a request for repainting. After grinding the substrate and treating the cracks, we finished the work using the epoxy thick coating method. Please feel free to contact us when you need our services. [Case Overview] ■ Comprehensive Academic Institution, Tokyo *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where we received a request for new construction of a tenant building and carried out the work at Asahi Coating. One of the characteristics of the tenant building was that there were many obstacles, making the waterproof painting a very challenging task. Therefore, we carried out the work carefully, resulting in a beautiful finish that pleased our customer. Please feel free to contact us when you need our services. 【Case Overview】 ■New Construction (Tenant Building Rooftop Waterproofing and Renovation Work) *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where we were requested to apply flooring at two factory facilities of an industrial waste treatment plant. U-Crete is highly durable and can withstand harsh areas where heavy machinery is in operation. This particular site required a coating thickness of 12mm to 25mm, demanding exceptional impact resistance. U-Crete flooring applications can be utilized in various fields, not limited to food factories. Please feel free to contact us when you need our services. 【Case Overview】 ■ Industrial Waste Treatment Plant - A facility for collecting and compressing empty cans (juice cans and coffee cans) - A collection facility for compressing sorted materials ■ Flooring Method - U-Crete FL 20mm specification *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Here is a case study of the flooring installation at a newly established craft beer factory in Kanagawa. Since it is intended for heavy use, we received requests to prioritize durability and proceeded with the installation. The color of the flooring is gray. We focused on heat resistance, chemical resistance, and corrosion resistance during the installation. Please feel free to contact us when you need our services. 【Case Overview】 ■Yorokko Beer Factory, Kamakura City, Kanagawa Prefecture ■Flooring Method ・Eucolite UD200SR 6mm specification, Eucolite RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We have received a request for the construction of a new school lunch center in Mobara City, Chiba Prefecture, and we are currently carrying out the flooring work. Our company undertakes public works projects. If you have any concerns regarding flooring installation, please feel free to let us know. We accept projects primarily in Kashiwa City, Chiba Prefecture, as well as in Tokyo and Kanagawa. 【Project Overview】 ■ New construction of a school lunch center in Mobara City, Chiba Prefecture *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where a special material that hardens even at -25°C was used in a large freezer, without changing the freezer's temperature to room temperature and while maintaining it at -25°C. The entrance and exit of the freezer are prone to damage due to the frequent temperature fluctuations. Concrete is also affected by heat cycles. If the freezer were to be changed to room temperature, it would require the removal of stored items, but by conducting the work without changing to room temperature, we were able to complete the construction without significantly impacting the customer's operations. At Asahi Coating, we provide various proposals tailored to our customers' situations and requests. If you have any concerns regarding floor coating or the Eucrete method, please feel free to consult us. [Case Overview] ■ Construction in a large freezer at -25°C *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where the Youcleat method was adopted for the new construction of Hotel Route Inn, which is being expanded nationwide. The Youcleat method uses a water-based rigid urethane as the main material for the flooring, making it a high-performance flooring material suitable for food-related factory floors due to its excellent heat resistance, mold resistance, and chemical resistance. It also has low odor during construction, which has received positive feedback. Additionally, Asahi Coating also offers construction using the "Youcleat PBM Mold Prevention Specification." Please feel free to consult us regarding construction for factories that prioritize mold prevention and antibacterial properties. [Case Overview] ■ Hotel Route Inn ■ Flooring Method - Youcleat UD200SR 6mm Specification, Youcleat RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request for the installation of line markings and stop signs at the Ota Market of the Tokyo Metropolitan Central Wholesale Market, and we would like to introduce a case where the U-Crete method was used for the installation. In the fruit and vegetable market, large trailers frequently enter and exit, which poses a problem where conventional paint would quickly peel off and wear away. Therefore, the U-Crete method was evaluated for its toughness and adopted for this project. The U-Crete method is a flooring system that excels in toughness and durability. It is recommended for situations that anticipate heavy use or where durability is a priority, so please feel free to consult us. 【Case Overview】 ■ Tokyo Metropolitan Central Wholesale Market, Ota Market *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where we received a request for the construction of a rice cracker factory (confectionery packaging line) in Nagaoka City, Niigata Prefecture. The construction was carried out using "BASF MasterTop 1430." The key point of this construction is the complete protection of the machinery. The substrate preparation involved the complete removal of the old coating using a large grinding and polishing machine. No matter how excellent the paint used is, if any of the previous coating remains or if there are issues with the construction method, the benefits of the paint cannot be maximized. If you are facing any issues with floor construction in your building, please consult Asahi Coating first. 【Case Overview】 ■ Nagaoka City, Niigata Prefecture - Rice Cracker Factory Floor Coating ■ Floor Coating Method ・BASF MasterTop 1430. *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We are pleased to introduce our undertaking of repairs for the Chiba Prefectural Meat Public Corporation. This area was constructed by our company about five years ago, but cracks have appeared due to earthquakes, and we received a request for repairs this time. Since this is a place where beef and pork carcasses are stored, we completely enclosed the area with a tent-like structure to avoid dust. This type of protection is sometimes used in food manufacturing environments. The existing coating was applied with "Eucolite UD200SR" at a thickness of 7-8mm, making the chipping process quite challenging. After manually chipping away the old coating completely, we adjusted the substrate using a large grinding and polishing machine. After thorough polishing, we applied the finish with "Eucolite UD200SR." [Case Overview] ■ Floor repair work for Chiba Prefectural Meat Public Corporation ■ Flooring method ・Eucolite UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce the construction requested by a food manufacturing factory in Akihabara, Niigata Prefecture. The old coating was 10mm thick and was removed manually, a process known as hand chiseling. After that, diamond polishing was carried out. The method used is "Ucrete UD200SR 10mm specification." By completely removing the coating, we can take advantage of the benefits of the Ucrete method. Since this is a food manufacturing factory, we have taken proper precautions and preparations for the construction. If you wish to improve the hygiene and durability of the factory floor, please consult Asahi Coatings. 【Case Overview】 ■ Food manufacturing factory in Akihabara, Niigata Prefecture - Floor coating construction ■ Floor coating method ・Method: Ucrete UD200SR 10mm specification *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Nishikawa Co., Ltd. and completed the flooring at their Katsura factory in Chiba Prefecture. The Katsura factory is a seafood processing facility, and they were concerned about mold due to working in a windowless environment. Asahi Coating proposed anti-mold measures. The flooring was installed using "Eucolite PBM0.5," and the walls were similarly treated with Eucolite. Additionally, there was a sloped area within the factory, and we were also asked to level that slope. Typically, this work would take a week, but by utilizing the properties of the resin, we were able to resolve the slope in just one day, thus shortening the construction period. [Case Overview] ■ Nishikawa Co., Ltd. Katsura Factory, Katsura City, Chiba Prefecture ■ Flooring Method ・Eucolite PBM0.5 *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We have been commissioned by the Chiba Prefectural Meat Public Corporation for regular maintenance work as part of preservation construction. The scope of work is approximately 200m² and involves a large animal cooling room (a refrigerator used to cool and store cut beef carcasses). The Euclite method is often requested primarily in the food sector, but it is currently receiving very high evaluations in various fields outside of food factories in terms of durability and chemical resistance. Please feel free to contact us when you need our services. 【Case Overview】 ■ Chiba Prefectural Meat Public Corporation Euclite Preservation Work *For more details, please refer to the PDF materials or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

A customer who had been using conventional epoxy resin flooring requested a stronger flooring solution. We conducted test installations in two areas with severe depressions and uneven surfaces. The finished surface is nearly flat, making forklift operation safer. For situations with frequent impacts on the floor from machinery, or where forklifts, trucks, and large trailers operate within factories or premises, we recommend flooring using the U-Crete method. Asahi Coatings accepts requests for U-Crete method flooring installations. Please feel free to contact us when you need assistance. [Case Overview] ■ Kashiwa City, Chiba Prefecture - Flooring installation at a building hardware manufacturing factory *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We have received a request for the U-Crete construction at a food processing factory located in Ota Ward, Tokyo. As part of the surface preparation, we are removing the old paint, performing diamond grinding, and grooving, and finishing with "U-Crete UD200SR." Asahi Coating has received many requests for flooring construction in food processing factories. If you have any concerns regarding flooring construction or U-Crete installation, please feel free to contact us. 【Case Overview】 ■ Ota Ward, Tokyo - Food Processing Factory ■ Flooring Method ・ U-Crete FL ・ U-Crete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request for renovation work from a restaurant located in Ryogoku, Sumida Ward, Tokyo. After surface preparation, we finished with "Euclea UD200SR," and the baseboards were installed with "DP Top." Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Restaurant in Ryogoku, Sumida Ward, Tokyo ■ Flooring construction method ・Euclea UD200SR ・DP Top *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We have received a request for repair work on the foundation joint of the factory. Despite multiple repairs, damage continues to occur due to cracks, so this time you requested construction with high strength. We are finishing with "Eucurete FL" to enhance strength during the construction. [Case Overview] ■ Factory ■ Flooring Method: Eucurete FL *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Here is an example of a construction project for a meat processing factory located in Yokohama City, Kanagawa Prefecture. We received a request to replace the baseboard molding and connect it to the flooring and coating. We have removed the existing baseboards and backfilled with quick-setting mortar, and the finish is 'U-Crete RG'. 【Project Overview】 ■ Meat Processing Factory in Yokohama City, Kanagawa Prefecture ■ Flooring Method: U-Crete RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request for renovation work on the office, and we carried out the construction. From substrate treatment to finishing, Asahi Coating was in charge, and later, the installation of the baseboards was also carried out. Our company specializes in U-Crete method and floor coating work, primarily in Kashiwa City, Chiba Prefecture, so please feel free to contact us when needed. 【Case Overview】 ■ Certain Office ■ Floor Coating Method ・U-Crete MF ・Master Top 1430P *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a food company in Nakano, Tokyo. We carried out the construction using the U-Crete method. Due to the presence of steps, unevenness, and slopes, we performed corrective work and treated the uneven surfaces. The construction for this case was divided into two phases, with the second phase including substrate treatment and slope correction along the walls. By carefully performing substrate treatment and polishing, we maximize the effectiveness of U-Crete, resulting in a floor with excellent durability. [Case Overview] ■ Food company in Higashi-Nakano, Tokyo ■ Flooring method: U-Crete FL *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received an inquiry from a chemical manufacturing company in Chuo-ku, Tokyo. It was reported that the slope area has sunk due to the weight of forklifts, as it is made of asphalt. We are currently conducting repair work on the slope area. We performed the repairs using "Eucolite FL" to ensure it can withstand the weight of the forklifts. 【Case Overview】 ■ Chemical manufacturing company in Chuo-ku, Tokyo ■ Flooring method: Eucolite FL *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received an inquiry from a food processing manufacturer in Koga City, Ibaraki Prefecture. We carefully performed the surface preparation and used "Euclea UD200SR" for the flooring material. One of its features is that, since the main component is water-based urethane, it allows for a beautiful seamless matte finish. Additionally, not only does it look good, but it also offers high chemical resistance and slip resistance even in harsh temperature environments, making it easy to clean. Another flooring material, "Euclea MF," also has water-based urethane as its main component, but its uniqueness lies in its hygiene and long lifespan, which can reduce maintenance costs for our customers. [Case Overview] ■ Food processing manufacturer in Koga City, Ibaraki Prefecture ■ Flooring construction method ・Euclea UD200SR ・Euclea MF *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received an inquiry from a food processing manufacturer in Funabashi City, Chiba Prefecture. By using the U-Crete method, it is possible to finish floors that excel in heat resistance, impact resistance, mold resistance, and chemical resistance, which are important in food processing factories. This method particularly demonstrates its true value in hygienic environments such as those in food and pharmaceutical industries. As Asahi Coating has extensive experience in constructing hygienic and durable floors essential for food factories, companies facing issues with floor damage or aging are welcome to consult us. [Case Overview] ■ Food processing manufacturer in Funabashi City, Chiba Prefecture *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received an inquiry from a food processing manufacturer in Ota Ward, Tokyo. First, we removed the clinker tiles commonly used outdoors, and then we applied a leveling coat to raise the surface by the thickness of the tiles and treated it with Euclite FL. Euclite FL combines the durability of water-based rigid urethane with the toughness of concrete, making it a water-based rigid urethane floor repair and leveling material that can withstand frequent traffic from heavy loads. It is an excellent flooring material for food warehouses, like the one in this case, where heavy loads are frequently moved. Asahi Coatings employs the Euclite method, which can withstand harsh temperature environments such as freezers. Companies operating in factories with significant temperature fluctuations, such as food and pharmaceutical factories, are welcome to reach out for consultation. 【Case Overview】 ■ Food processing manufacturer in Ota Ward, Tokyo ■ Flooring method: Euclite FL *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received an inquiry from a food processing manufacturer in Ota City, Tokyo. First, we removed the clinker tiles, which resulted in a significant amount of industrial waste. After removing the tiles, we performed diamond polishing, and then applied a base coat to the areas where unevenness was noticeable. Next, we raised the height by 20mm using "Eucolite FL," and finished it with "Eucolite UD200SR." [Case Overview] ■ Food processing manufacturer in Ota City, Tokyo ■ Flooring construction method - Eucolite FL - Eucolite UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

Renovation work in the refrigerated corridor at the Tokyo Metropolitan Meat Market, Shinjuku Station side meat center, and a case of floor surface repair on part of the baseboard. First, treatment is performed on the substrate. By polishing and cutting into the details, the condition is prepared. Then, repairs are made at the junction with the floor using "UD200SR," and the rising part is constructed with "Eucolite RG." Additionally, work is done on the baseboard section with "Eucolite DP Top," completing the project. 【Case Overview】 ■ Tokyo Metropolitan Meat Market, Minato Ward, Tokyo ■ Flooring construction method ・Eucolite RG ・Eucolite UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

This is a request from Hanazono Service Co., Ltd. in Nagaoka City, Niigata Prefecture. We received a request from this customer in 2019 as well, and they have once again requested our services. The location is a waste intermediate processing facility, and the method used was 'Eucleet FL'. [Case Overview] ■ Hanazono Service Co., Ltd., Nagaoka City, Niigata Prefecture ■ Flooring method: Eucleet FL, 20-30mm *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where we repaired the liquid-proofing section of the plant equipment installed on the rooftop of Fuji Oil Co., Ltd. at their request. First, we performed surface preparation. We removed all FRP adhesion, resulting in the complete exposure of the structural surface. After that, we carried out the flooring work (using U-Crete RG), but this was quite complicated, making it a challenging task. However, even in the confined space, our highly skilled staff successfully completed the work. Asahi Coating offers flooring painting and other services primarily in Kashiwa City, Chiba Prefecture, and has experience in a wide range of locations, including factories and commercial facilities, so you can feel confident in entrusting us with your projects. [Case Overview] ■ Fuji Oil Co., Ltd., Mihama Ward, Chiba City ■ Flooring Method: U-Crete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We undertook construction at the Environmental Building of the University of Tokyo, Kashiwa Campus. For this project, we used epoxy instead of U-Crete due to design considerations. First, we completely removed the old paint film for substrate preparation and performed diamond polishing. Then, we applied a solvent-based primer as a base coat on the floor, followed by a mid-coat using solvent-free epoxy and putty. Finally, we applied a thick coating method for the top coat, completing the floor. For the walls, after surface preparation, we applied a water-based synthetic resin emulsion sealer and painted twice with an environmentally friendly synthetic resin emulsion paint. Although we used epoxy this time, we also accommodate various methods including U-Crete. Customers looking for flooring construction in environments where hygiene is a priority are welcome to consult Asahi Coating. [Case Overview] ■ Kashiwa City, Chiba Prefecture, University of Tokyo, Kashiwa Campus ■ Flooring Method: Epoxy *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Hakimma Warehouse for the construction of their warehouse floor, and we would like to introduce a case where we repaired a cracked floor using the U-Crete method. Inside the warehouse, there are many moving objects such as people, forklifts, and towing vehicles, so unevenness and cracks in the floor can lead to accidents and are very dangerous. Therefore, if you notice any abnormalities in the floor, we recommend performing maintenance on it. When conducting regular floor maintenance, please contact Asahi Coating, which has extensive experience in various warehouse flooring applications. 【Case Overview】 ■ Hakimma Warehouse ■ Flooring Method: U-Crete Method *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Nonaka Manufacturing Co., Ltd. and would like to introduce a case of partial floor repair. First, we removed the deteriorated flooring and then applied a coating to the floor. By using the U-Crete method for the coating, we were able to enhance the durability of the floor and prevent the progression of deterioration such as cracking. If you are experiencing increased tripping hazards due to the deterioration and unevenness of your factory floor, please feel free to contact us. [Case Overview] ■ Nonaka Manufacturing Co., Ltd. ■ Floor Coating Method: U-Crete Method *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request for repairs from Tokai Pickles regarding "Kokuuma Kimchi." At this site, the surface is peeling. We applied the U-Crete method to address the surface peeling. Since coated floors deteriorate over time, if the flooring is peeling, it compromises its original function. Asahiko Coating also offers maintenance for coated floors, so please feel free to consult us. 【Case Overview】 ■ Tokai Pickles Ibaraki Factory, Ibaraki Prefecture ■ Flooring Method: U-Crete Method *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Goto Motors and would like to introduce a case of floor construction using the U-Crete method. The site was in very poor condition, with an uneven and shaky floor. As a result of careful construction, the outcome was satisfactory to the client. Asahi Coating is also capable of repairing severely deteriorated floors. Customers who wish to have repairs done using a coated floor are welcome to consult with Asahi Coating. 【Case Overview】 ■ Goto Motors ■ Floor construction method: U-Crete MF * For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case where we received a request for floor coating construction from Utec and carried out the work. Before the construction, the floor paint was peeling, exposing the ground underneath. First, we used a chipping machine for grinding, and then we applied the floor coating using the U-Crete method. We successfully finished with a flat and beautiful gray floor. Regular maintenance of the coated floor can help maintain its beautiful appearance and high practicality. If you are considering maintenance for your coated floor, please feel free to consult Asahi Coating. 【Case Overview】 ■ Utec ■ Coating Method: U-Crete Method (UD200SR) * For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from the Meat Public Corporation located in Chiba Prefecture. We are currently working on the flooring portion of a new facility, which involved correcting the water slope. Asahi Niko has extensive experience in construction for food companies that require hygienic flooring. If you are considering flooring construction, please feel free to contact Asahi Niko in Kashiwa City, Chiba Prefecture. [Case Overview] ■ Chiba Prefecture Meat Public Corporation ■ Flooring Method: Eucrete Method (UD200SR) *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce the construction of the "Epoxy Thick Coating Method" requested by Yamai Electric in Chiba Prefecture. Epoxy resin excels in "durability," "wear resistance," and "aesthetic appearance," making it a commonly used flooring material in various environments such as factories and public facilities. In this construction, we carefully prepared the surface and successfully finished it beautifully. Asahi Coating has extensive experience in epoxy thick coating methods for flooring. If you are considering flooring or floor painting for factories or various facilities, please feel free to consult with us. 【Case Overview】 ■ Yamai Electric, Chiba Prefecture ■ Flooring Method: Epoxy Thick Coating Method *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from the Fujiseiyu Chiba Factory in Chiba City, Chiba Prefecture. We are working with the "U-Crete UD200SR + Line" method. We carefully applied the flooring to ensure there are no inconsistencies in quality, resulting in a beautiful finish. U-Crete UD200SR is a high-performance flooring material that uses water-based rigid polyurethane, excelling in chemical resistance, slip resistance, and extreme temperature conditions. Additionally, its seamless and smooth finish makes cleaning easy, which is another feature. 【Case Overview】 ■ Fujiseiyu Chiba Factory, Chiba City, Chiba Prefecture ■ Flooring Method: U-Crete UD200SR + Line Method *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from the Fuji Oil Chiba Plant and carried out construction work using the "U-Crete UD200SR" method. First, we prepared the surface by polishing the floor to ensure its condition. Next, we painted the areas that were different in color first, and then applied the U-Crete UD200SR coating to the entire floor. The U-Crete method has a low possibility of mold growth and bacterial proliferation, making it very effective in terms of hygiene. [Case Overview] ■ Fuji Oil Chiba Plant, Chiba City, Chiba Prefecture ■ Flooring Method: U-Crete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We conducted construction work inside JR Shinagawa Station, located in Minato-ku, Tokyo. First, we polished the floor and filled in the recessed areas with putty. Once the base was prepared, we applied a primer, followed by a finishing coat to complete the job. Asahi Niko has extensive experience in flooring construction, including the Euclide method. We will propose suitable construction methods that meet our customers' needs, so if you are considering floor maintenance for factories or facilities, please contact Asahi Niko. 【Case Overview】 ■ Location: JR Shinagawa Station, Minato-ku, Tokyo ■ Flooring Method: Rigid Urethane *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Maniha Foods located in Maebashi City, and we carried out construction work using "Eucalite UD200SR+RG." Before starting the work, we conducted protective measures, then began polishing the floor, carefully working on narrow areas such as gutters using a small chipping machine. After completing the substrate treatment, we applied the Eucalite method to the floor and gutters. Asahi Coating, located in Kashiwa City, Chiba Prefecture, has extensive experience in Eucalite method construction. Customers considering flooring for factories and facilities are welcome to consult with us. [Case Overview] ■ Maniha Foods, Maebashi City, Gunma Prefecture ■ Flooring Method: Eucalite UD200SR+RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor