澁谷工業 List of Products and Services

This machine generates superheated steam at a maximum temperature of 300°C and fills the interior, allowing food to be heated in a continuous baking process under extremely low oxygen conditions.

• others

We are pleased to hear that you are doing well. We would like to express our sincere gratitude for your continued support. We are excited to announce that our company will be exhibiting at the "13th High-Performance Plastics Exhibition - Plastic Japan" (Makuhari Messe). We will be showcasing the following equipment at our booth, and although we know you are busy, we would be delighted if you could stop by. * Inline Continuous Powder-Liquid Mixing and Dispersion System * Tabletop Inline Dispersion Device * Small Ultrasonic Dispersion Device * Ultrasonic Generator These products utilize continuous mixing and dispersion technology, which significantly improves production efficiency compared to traditional batch methods. All of our staff are looking forward to welcoming you to our booth. [Event Information] * Dates: October 29 (Tuesday) to October 31 (Thursday), 2024 10:00 AM to 6:00 PM (until 5:00 PM on the final day) * Booth Number: Hall 6, Booth Number 35-26 (Plastic Japan Area) * For more details about the exhibition, please refer to the related links. You can download the PDF for more information or feel free to contact us.

• others

We powerfully clean and strip dirt using a combination of media such as baking soda and high-pressure water. Our unique nozzle allows for wet blasting cleaning that effectively removes dirt while minimizing damage to the items being treated. Since it is attached to a vehicle, it can be transported anywhere. If you are struggling with paint stripping, rust, or stubborn dirt, we can conduct tests at our factory. Please contact us.

• others

This machine is a commercial cleaning device equipped with a high-pressure water pump and a high-efficiency boiler, capable of removing dirt with high-pressure hot water. It is portable and can be taken anywhere thanks to its wheels. The nozzle employs our unique Natural Mix Air Jet method, which allows for more powerful dirt removal without using a compressor by automatically drawing in air. Additionally, the wide nozzle enables extensive cleaning in a short time. We accept cleaning tests at our factory. If you are struggling with stubborn oil stains, mold, or rust removal, please feel free to contact us.

• others

With consideration for the environment, the "CMC Dissolution Energy-Saving Equipment" eliminates the need for heating devices required for dissolution, allowing for faster dissolution compared to conventional stirring equipment. We are showcasing a working model at the secondary battery exhibition, which is ongoing until today. Please feel free to come and take a look!

• others

This is an inline solid-liquid mixing and dispersion system for inks (paints). It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated through our plant business, we provide tailored solutions to meet diverse needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating lumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We offer total engineering solutions tailored to user needs. *We are currently providing materials that introduce examples of equipment combinations such as slurry-type and batch-type systems.

• others

This is an inline solid-liquid mixing and dispersion system for electronic materials. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated through our plant business, we provide tailored solutions to meet diverse needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating lumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We offer total engineering solutions tailored to user needs. *We are currently providing materials that introduce examples of equipment combinations such as slurry and batch systems.

• others

This is an inline solid-liquid mixing and dispersion system for battery materials. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated through our plant business, we provide tailored solutions to meet diverse needs. 【Features】 1. Our unique dispersion system enables the mixing and dispersion of fine powders in a short time without generating clumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We offer total engineering solutions tailored to user needs. *We are currently providing materials that introduce examples of equipment combinations such as slurry-type and batch-type systems.

• others

This is an inline solid-liquid mixing and dispersion system for resin materials. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated in the plant business, we provide tailored solutions to meet diverse needs. 【Features】 1. Our unique dispersion system enables the mixing and dispersion of fine powders in a short time without generating lumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We offer total engineering solutions tailored to user needs. *We are currently providing materials that introduce examples of equipment combinations such as slurry and batch systems.

• others

This is an inline solid-liquid mixing and dispersion system for adhesives. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated through our plant business, we provide tailored solutions to meet diverse needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating lumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We offer total engineering solutions tailored to user needs. *We are currently providing materials that introduce examples of equipment combinations such as slurry-type and batch-type systems.

• others

This is an inline solid-liquid mixing and dispersion system for adhesives, resin materials, battery materials, electronic materials, inks, and paints. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated in the plant business, we respond individually to various needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating lumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We provide total engineering tailored to user needs. *We are currently offering materials that introduce examples of equipment combinations such as slurry and batch systems. We will also be exhibiting at BATTERY JAPAN, which will be held from February 28 (Wednesday). You can see the actual equipment, so please come visit us.

• others

The SPF4125 model "Falcon-S48" supports a processing range of 1250mm x 1259mm and can handle a wide range of general structural rolled steel materials (SSS materials) with thicknesses from 0.1mm to 12mm. The full cover of the main body is equipped with a sliding mechanism, allowing for manual or automatic opening and closing via a handle, enabling the loading and unloading of workpieces from three sides and the top. Furthermore, by incorporating a self-manufactured laser oscillator with an output of 2 kilowatts into the processing machine body, it achieves one of the smallest installation areas in the industry for laser processing machines of the same size, measuring 2490mm in width, 4940mm in depth, and 2306mm in height. Additionally, a pull-out chip bucket is provided at the bottom, making it easy to handle leftover materials such as chips that fall from the table.

• others

Shibuya Industrial Co., Ltd. will be exhibiting at "MF-TOKYO 2023," which will be held at Tokyo Big Sight from July 12 (Wednesday) to July 15 (Saturday), 2023. We will be unveiling our new 2D fiber laser processing machine, "SPF4125," designed for a processing area of 4'×8'. This ultra-compact device features a processing range of 1250×2550mm and has a 2Kw oscillator built into the main body of the machine. During the exhibition, we will conduct live demonstrations with narration. We invite you to experience the processing performance firsthand. Additionally, we are showcasing our lineup of fiber laser processing machines! You can view them immediately from the link below [PDF Download]. 【Exhibition Overview】 ■ Dates: July 12 (Wednesday) to July 15 (Saturday), 2023 ■ Hours: 9:00 AM to 5:00 PM (until 4:00 PM on the last day) ■ Location: Tokyo Big Sight, East Hall 7 ■ Booth Number: 7-10 ■ Exhibited Products: 2D Fiber Laser Processing Machine "SPF4125/SFX2000D" *For more details, please refer to the related links or feel free to contact us.

• Special Construction Method

The "FWL1500SH" is a fiber laser welding machine with a swing function designed for handheld torch use. It is equipped with a 1500W oscillator, allowing it to weld thicker materials than the FWL1000SH. With the addition of the swing head, it is capable of welding materials with gaps. It consumes less power, reducing running costs, and features a space-saving, compact design. It allows for continuous oscillation, resulting in a clean bead and achieving excellent welding strength and penetration depth. 【Features】 - Capable of welding materials with gaps due to the swing head - Achieves excellent welding strength and penetration depth - Allows for continuous oscillation to obtain a clean bead - Consumes less power, reducing running costs - Minimal consumables and easy maintenance - Space-saving, compact design - Built-in chiller

• others

The "HCP Series" is a versatile hydraulic press that excels in a variety of applications. It achieves top-class rigidity and can accommodate special specifications (optional). Additionally, the adoption of a sequencer makes it easy to support automation. Please feel free to contact us when you need assistance. 【Features】 ■ Energy-saving achieved through inverter control ■ Easy automation support due to the adoption of a sequencer ■ Significantly improved operability with the use of a touch panel ■ Achieves top-class rigidity ■ Special specifications can be accommodated (optional) *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "NSN Series" is a deep-drawing hydraulic press equipped with an NC die cushion (20 levels) as standard. The idling stop function achieves energy savings and also reduces the amount of operating oil used. Additionally, options such as a "slide knockout device" and "low-pressure die cushion" are available. 【Features】 ■ Pressure speed can be set to 5 levels ■ NC die cushion (20 levels) ■ Motion monitor function that allows monitoring of conditions during forming ■ Repeated stop accuracy at the lower limit position is within ±0.2mm of the set value (after several demo operations) ■ Energy savings achieved through the idling stop function, reducing the amount of operating oil used ■ Equipped with a warm-up operation mode *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce our cold forging hydraulic press, the 'NCH Series'. The repeat stop accuracy at the bottom dead center position is within ±0.2mm of the set value (after several demo operations). Additionally, the idling stop function achieves energy savings. Please feel free to contact us when you need assistance. 【Features】 ■ Pressure speed can be set in five stages ■ Equipped with a motion monitor function that allows monitoring of conditions during forming ■ Repeat stop accuracy at the bottom dead center position is within ±0.2mm of the set value (after several demo operations) ■ The idling stop function achieves energy savings and reduces the amount of operating oil used ■ Equipped with a warm-up operation mode *For more details, please refer to the PDF document or feel free to contact us.

• others

The SPF4112 model "FALCON-S/Fiber" is a fiber laser processing machine that integrates a 2KW fiber laser oscillator and control unit into the main body of the machine, achieving a compact footprint of 2.45m, making it space-saving and ultra-compact. Compared to the carbon dioxide lasers that have been the mainstream in laser processing machines, fiber lasers do not require laser gas and are energy-efficient, enabling low running costs. Additionally, due to the difference in wavelength, high-speed processing of thin steel plates and cutting of highly reflective materials such as aluminum and brass have become easier. This machine is a user-friendly model that emphasizes "ease of use" by incorporating customer feedback. To improve operability, it features a larger monitor, a unified layout of operation switches, and a rotary control panel, making it adaptable to any work scene. Furthermore, the processing restart function helps reduce the workload for customers. This processing machine meets various needs, including installation space, workability, processing capability, and reduction of processing time!

• others

The "SPF6030/SFX3000" is a 2D fiber laser processing machine that enables low-cost processing through air cutting. It is suitable for high-speed cutting of thin non-ferrous metals such as copper and aluminum. There is no need for optical axis adjustment, significantly improving maintenance. Compared to carbon dioxide laser processing machines, it does not require laser gas and consumes less power, greatly reducing running costs. 【Features】 ■ Supports small-lot production of various types ■ Suitable for high-speed cutting of thin non-ferrous metals such as copper and aluminum ■ Greatly reduces running costs due to no need for laser gas and lower power consumption ■ Significantly improves maintenance with no need for optical axis adjustment ■ Enables low-cost processing through air cutting *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SLA Series" is a laser ablation processing machine capable of processing fluororesin films and polyimide films without burning. With a robust frame and a highly reliable galvanometer scanner, it achieves high-precision processing. It can perform fine engraving on the surfaces of various materials. Equipped with an ultra-short pulse laser oscillator (picosecond, nanosecond), it enables processing of metals, resins, ceramics, and more while minimizing thermal effects. 【Features】 ■ Equipped with an ultra-short pulse laser oscillator (wavelength: green laser, UV laser) ■ Capable of processing metals, resins, ceramics, etc., with minimized thermal effects ■ Achieves high-precision processing with a robust frame and a highly reliable galvanometer scanner ■ Enables high-quality cutting of laminated materials such as flexible printed circuits (FPC) ■ Capable of processing fluororesin films and polyimide films without burning ■ Allows for fine engraving on the surfaces of various materials *For more details, please refer to the related links or feel free to contact us.

• others

The "SPL Series" is a carbon dioxide laser processing machine that achieves high-speed and high-quality cutting of die boards. The "SPL3827D model" features an automatic air vice that suppresses material wobble and tilt. It is a high-precision model compatible with large cardboard and LCD film die cutting. In addition, we offer the "SPL3821D model," which significantly improves smoke exhaust capability with a new push-and-pull smoke exhaust mechanism, as well as the "SPL2321D model" and "SPL2425R model." 【Features of the SPL3827D model】 ■ High-precision model compatible with large cardboard and LCD film die cutting ■ High-rigidity frame that enables stable processing of large die boards ■ Automatic air vice that suppresses material wobble and tilt *For more details, please refer to the related links or feel free to contact us.

• others

The SCF5113 model is a 3D fiber laser processing machine that adds a high-precision three-dimensional drive axis for ultra-precision machining. It features a high-speed moving table that operates at 50 meters per minute. The all-in-one structure, which incorporates the oscillator and CNC device, achieves a space-saving design. By adopting offline teaching (optional), setup time can be significantly reduced. 【Features】 ■ Achieves a minimum cutting width of 60μm (when equipped with SFX500) ■ Utilizes a high-speed moving table operating at 50 meters per minute ■ All-in-one structure with built-in oscillator and CNC device ■ Capable of flat processing with a flat processing table ■ Significant reduction in setup time through the adoption of offline teaching ■ Additional non-contact guiding axis can be added *For more details, please refer to the related links or feel free to contact us.

• others

The "SPF2305A/SPF3907A" is a fiber laser processing machine equipped with a compact table that achieves ultra-precise machining. With a single-mode fiber laser that has excellent beam quality, it achieves a cutting width of 40μm. Compared to carbon dioxide lasers and pulsed YAG lasers, it significantly reduces power consumption and maintenance costs. The "SPF3907A" realizes high motion performance through linear motor drive. 【Features】 ■ Excellent beam quality with a single-mode fiber laser ■ Achieves a cutting width of 40μm ■ Significantly reduces power consumption and maintenance costs ■ High motion performance achieved through linear motor drive (SPF3907A) *For more details, please refer to the related links or feel free to contact us.

• others

The "SPF4300 model" is an energy-efficient machine that reduces power consumption by over 60% compared to carbon dioxide lasers, resulting in low running costs. We offer the "SPF4320A," which is suitable for processing non-ferrous metals such as stainless steel, aluminum, and copper, and the "SPF4330," which features an anti-reflective light design to support stable operation. With a single-mode fiber laser that has excellent beam quality, high-speed and high-quality processing is possible. 【Features】 - High-speed and high-quality processing enabled by a single-mode fiber laser - Capable of processing non-ferrous metals such as copper, copper alloys, and aluminum - Power consumption reduced by over 60% compared to carbon dioxide lasers - Energy-efficient machine with low running costs *For more details, please refer to the PDF document or feel free to contact us.

• others

"Jubei" is a carbon dioxide laser processing machine that supports three-dimensional processing with six-axis control. By thoroughly streamlining the focus and head section, the approachability for deep-drawing work has significantly improved. Stable quality processing is possible due to the W-axis control of the nozzle at the tip of the processing head. It employs a high-precision rotary axis that is fully compatible with offline teaching (optional), reducing correction work and improving work efficiency. 【Features】 ■ High-precision rotary axis fully compatible with offline teaching ■ Reduces correction work and improves work efficiency ■ Thoroughly streamlined focus and head section ■ Significantly improved approachability for deep-drawing work ■ Stable quality processing enabled by W-axis control of the nozzle at the tip of the processing head *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FALCON-S" is a laser processing machine that integrates various functions into an ultra-compact body. The control unit is stored beneath the processing table, achieving space-saving design. The residual material removal pan provided on the processing table allows for easy removal of processing debris. With the standoff control that widens the gap between the processing head and the workpiece during piercing, it suppresses spatter generated during piercing and prevents damage to the focus lens and nozzle. 【Features】 ■ Ultra-compact design with built-in laser oscillator and CNC unit ■ High dust-proof fully closed cover (optional) to maintain a good working environment ■ User-friendly machine that is easy to use ■ Excellent cost performance *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our ultra-precision carbon dioxide laser processing machine, 'SILAS-SAM'. It widely accommodates precision processing of thin plates, such as ceramics processing and resin sheet cutting in the resin industry. The open mirror structure makes mirror maintenance easy. We offer the "SPL3905," which achieves high-speed and precise processing with linear drive, and the "SPL2305," which realizes precision processing with stable beam quality. 【Features】 ■ Wide compatibility for precision processing of thin plates ■ Adoption of a compact table significantly reduces machine installation space ■ Open mirror structure allows for easy mirror maintenance ■ Automatic operation is possible when combined with loaders/unloaders *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Musashi HP-E Series" is a carbon dioxide laser processing machine designed for thin plates and small workpieces. Various laser oscillators (rated output of 200, 400, and 2000W) can be selected according to the processing requirements. It features a space-saving, compact design and employs a processing table with excellent accessibility. 【Features】 ■ Compatible with thin plates and small workpieces ■ Various laser oscillators can be selected according to processing requirements ■ Space-saving, compact design ■ Processing table with excellent accessibility *For more details, please refer to the related links or feel free to contact us.

• others

The "Musashi Sixth Generation Series" is a carbon dioxide laser processing machine that is easy to maintain due to its open mirror structure. It achieves high quality and low running costs, reducing the consumption of assist gas (N2) by approximately 30% during SUS non-oxidative cutting (compared to our conventional models). Additionally, the new push-and-pull mechanism improves dust collection efficiency by 30%. 【Features】 ■ Achieves high quality and low running costs ■ Reduces assist gas (N2) consumption by approximately 30% during SUS non-oxidative cutting ■ Easy maintenance due to the open mirror structure ■ New push-and-pull mechanism improves dust collection efficiency by 30% *For more details, please refer to the related links or feel free to contact us.

• others