椿本マシナリー List of Products and Services

The "AFH/AFHK series" is a precision planetary gearbox for servo motors that can suppress temperature rise. The "AFH series" offers 7 types (with reduction ratios from 3 to 100), and the output shaft is available in four types: S1 without key, S2 with key, S3 spline shaft, and S4 hollow output shaft. The "AFHK series" has 22 types of orthogonal reduction ratios (from 4 to 10,000). The backlash is highly precise at 2 to 3 minutes. 【Features】 ■ High torque ■ Long lifespan ■ Low noise *For more details, please refer to the PDF document or feel free to contact us.

• others

The "AH/AHK Series" is a high-precision reduction gear for servo motors that can accommodate a wide range of applications. The "AH Series" features high precision with a backlash of 1 to 2 arc minutes. Additionally, the "AHK Series" offers a high reduction ratio of up to 1/10000 through a combination of planetary and hypoid gears. Flanged shafts are also available as optional components. 【Features】 ■ Low noise ■ Optimized moment of inertia ■ Suppression of temperature rise ■ Long lifespan ■ Compatible with various motor shaft diameters ■ Optimized output torque *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "P2/P2R series" is a reduction gear for servo motors that can reduce backlash. Compared to the conventional P series, it achieves approximately 25% weight reduction (only for the parallel axis P2). Additionally, the miniaturization and high precision of internal components have resulted in a smaller internal moment of inertia. 【Lineup (excerpt)】 ■PS2 ■PE2 ■PA2 ■PG2R ■PN2R *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "AFX/AFXR series" is a high-precision planetary gearbox that uses stainless steel for the case body and output shaft. Thanks to the high-precision helical planetary gears, the engagement rate is increased, allowing for an even load balance and achieving quiet operation. The output shaft employs double-row angular contact ball bearings, enabling high load capacity against thrust and radial loads. 【Features】 ■ High rust resistance, corrosion resistance, suitable for clean environments ■ High efficiency and compact design ■ Low backlash ■ Wide variety ■ Standardized flanges compatible with various servo motors *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "High Precision Rack & Pinion" is a product with various specifications that can be selected, including quality grade, material, heat treatment, processing method, and coating. It features a high-precision specification achieved through gear grinding. There are two types: spur gears and helical gears, and three types of materials: carbon steel, alloy, and stainless steel. Additionally, the manufacturer designs and produces these products independently. Please feel free to contact us when you need assistance. 【Features】 ■ High load capacity ■ High speed ■ Low noise ■ Long lifespan ■ Short delivery time *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Crane Safety Regulations" and "Labor Safety and Health Regulations" mandate the inspection of lifting equipment before starting work. The use of unsuitable slings is also prohibited. For safety, please ensure that slings are inspected before use, and dispose of any belts that have deep cuts or significant wear. Even if there is no visible damage or abnormalities, dispose of items that exceed the following usage periods: - For indoor use: items that have been in use for more than 7 years. - For constant outdoor use: items that have been in use for more than 3 years.

• others

We would like to introduce the products of Apex Dynamics that we handle. Our lineup includes "high-precision rack and pinion," high-precision planetary gear reducers "AFX/AFXR series PAT-B compatible models," and servo motor gear reducers "P2/P2R series," among others. Please feel free to contact us if you have any inquiries. 【Partial Lineup】 ■ High-precision rack and pinion ■ High-precision planetary gear reducers "AFX/AFXR series PAT-B compatible models" ■ Servo motor gear reducers "P2/P2R series" ■ High-precision gear reducers for servo motors "AH/AHK series" ■ Precision planetary gear reducers for servo motors "AFH/AFHK series" *For more details, please feel free to contact us.

• others

The "RollerDrive RW Series" is a welding machine positioner that possesses the durability to withstand the impact of high-speed rotation positioning and emergency stops required for heavy objects in welding machines. It features a large-diameter hollow hole at the center of the output shaft, making it easy to wire and pipe to the equipment mounted on the output shaft, and allows for a compact installation by taking advantage of its slim body characteristics. It is composed of an output shaft integrated with an input shaft and roller follower. 【Features】 ■ Ultra-fast positioning (180° indexing time): 1.5 Sec/2000kg ■ Large-diameter hollow hole: 360mm ■ Slim body: 295mm *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive SP Series" is a welding positioner that achieves high efficiency through rolling transmission. By mechanically reducing the speed of the servo motor, it provides powerful torque, rigidity, and stability, while also enabling output motion that faithfully follows input control commands due to its unique preloading mechanism that eliminates zero backlash. It is an innovative FA motion control unit that also features ease of use, such as a standard large-diameter hollow shaft. 【Features】 ■ Load capacity: 300kg to 3,600kg ■ Large diameter hollow hole: φ245mm (SP360) ■ Slim body: 190mm (SP030 to SP060) ■ Repetition accuracy: ±0.03mm (SP030 to SP120) ■ Good stability allowing for reduced takt time ■ Durability that withstands the impact of emergency stops *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Variax opus2 series" is a general-purpose servo feeder for pressing that emphasizes basic performance and cost. Compared to the high-end Variax OPUS1 series, it is lightweight and compact. The upper and lower roll drive enables stable material feeding (for wide materials, thin materials, and soft materials) with low grip force. The large opening and removable cover on the bottom significantly improve the cleaning of the rolls. 【Features】 ■ Suitable for motor core manufacturing lines for home appliances ■ Global support for languages and services ■ High-speed stroke *For more details, please refer to the PDF document or feel free to contact us.

• others

The "LinerUnit CS Series" is a straight drive device that can transport 300 kg loads over 4 meters in 3.5 seconds with a motor capacity of 0.75 kW. It adopts a new mechanism that moves in a straight line on a rail by rotating a screw-shaped cam powered by a servo motor. This device enables the transportation of heavy materials and large multifunctional robots in production environments, contributing to the advanced automation of production lines and improved productivity. 【Features】 ■ Excellent durability ■ Easy and quick recovery ■ Capable of creating various movements, such as combining straight and rotational motions ■ Space-saving of up to 50% *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "SANDEX FEEDER SL Series" is a parts transport device that applies precision elliptical vibration, fully controlled by a cam. The performance and stability provided by extremely accurate vibrations offer benefits to production sites, enhancing the efficiency and added value of automated production. All models feature elliptical vibration, enabling high-speed and high-efficiency transport characteristics that accommodate various supply speeds. 【Features】 ■ Improved operating rate with constant amplitude and high stability ■ Low noise characteristics due to cam drive, significantly improving the working environment ■ Ability to keep the height of the device low due to flat product shapes ■ Recoil elimination through a damping mechanism (DSU) *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

The "SANDEX FN Series" is an ultra-compact oscillating handler for rotary/linear motion, designed to adapt to production systems that are downsizing. It incorporates the know-how from various cam units developed so far, achieving high reliability, high speed, and high precision. The turning angle has been set to 180°, and the maximum operating speed has significantly increased to 200 rpm. 【Features】 ■ Timing cams and sensors can be optionally mounted on the input shaft. ■ Torque limiters can be optionally mounted on the output shaft. ■ Induction motors can be optionally mounted. ■ Suitable for handling small components. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "SANDEX FEEDER" operates with a motor frequency of 61.6Hz and has a precise elliptical vibration feed time of 3 seconds. The variation in powder discharge amount was measured when the feeder was operated with a timer, repeatedly starting and stopping in the same cycle. The chute shape is 210mm in length and has a U-shaped groove, made of aluminum. 【Feeder Specifications】 ■ Model: SL25 ■ Amplitude in transport direction: 1.0mm ■ Amplitude in vertical direction: 0.2mm ■ Vibration trajectory: Horizontal ellipse *For more details, please refer to the PDF document or feel free to contact us.

• others

"LinerDrive" is a weight work transport package with a maximum load capacity of 1,000 kg. It features a unique linear drive mechanism unit that applies cam technology, along with guides, servo motors, and controllers packaged together. We propose the transport and positioning of heavy objects weighing 350 kg (LRS350) and 1000 kg (LRS1000) at a high level of precision. 【Features】 ■ Basic rail length is 3m, with extension rails of 1.8m ■ Reduced tact time due to excellent stabilization ■ Long strokes accommodated by connecting extension modules to the basic module ■ Easy setup and operation with a dedicated controller *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

The "Servo-dex EVR1 Series" is a motor core transfer molding drive device suitable for the manufacturing press line of motor cores for hybrid vehicles, PHEVs, and EVs. By directly connecting a high-performance servo motor, it drives the transfer stacking at high speed and high torque, while allowing for free setting of the transfer angle. By suppressing vibrations during stops and achieving high-precision positioning, it reduces the maintenance of molds. 【Features】 ■ High-end model pursuing high speed, high precision, and multifunctionality ■ Ensures reliability through a unique vibration absorption structure ■ Supports arbitrary transfer angle settings and skew processing of motor cores ■ Achieves optimization of the motor core line by combining servo feeders and servo dex (transfer devices) *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Variax opus" is a feeding device that contributes to improved productivity and yield with its high-performance servo motor suitable for material feeding operations. With dual roll drive, it enables stable material feeding with low grip force. Additionally, there is a high-rigidity bearing structure for the transfer device "Servo-dex EVR" that withstands belt tension. 【Features】 ■ World-class performance ■ Capable of feeding wide materials, thin materials, and soft materials ■ Significantly improves the cleaning ability of the rolls *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Variax" is a product that effectively combines a cam mechanism and servo control technology, resulting in excellent performance. Developed in 1976 with the aim of streamlining adjustment tasks for feeding devices, such as changes in feed length and material thickness due to changes in setup work, while achieving high-speed and stable feeding. In response to various demands in the press processing industry, we focused on developing high-performance high-speed feeding devices, resulting in a product lineup that is faster, more precise, and easier to operate. 【Product Lineup (Excerpt)】 ■ VUC Series: Uncoiler ■ VR Series: Servo Feeder ■ VG/VGX/V Series: Cam-type Feeding Device ■ VSC/VLC Series: Loop Controller ■ EVR1/2 Series: Stacking Device *For more details, please refer to the PDF document or feel free to contact us.

• others

Sankyo Manufacturing Co., Ltd. is a manufacturer of automation technology and services that develops various products achieving high precision, high speed, and high efficiency movements through relentless refinement of cam technology. With increasing recognition, we support the manufacturing sites of diverse industries such as automotive, food, and semiconductors through our products. While focusing on product development, we are also actively enhancing our production and service systems and expanding into overseas markets. 【Products】 ■ RollerDrive ■ Sandex ■ Variax ■ LinerUnit ■ Machine Tools ■ System Integration *For more details, please refer to the PDF materials or feel free to contact us.

• Secondary steel products

"TORQUE LIMITERS" are overload protection devices that can accurately transmit torque. They have no backlash and high rigidity, with precise return positions after overload disconnection, and can detect overloads. They employ a unique mechanical torque disconnect mechanism using ball & ball pockets and roller & roller pockets. 【Features of the TF Series】 ■ Can be directly mounted on tables, sprockets, pulleys, arms, etc. ■ Standardized small series ■ Minimum disconnect torque of 0.3 N·m ■ Have a long history, abundant track record, and high reliability ■ Suitable for Sundex D, DU, DR, and P series *For more details, please refer to the PDF document or feel free to contact us.

• others

The "TORQUE LIMITERS TF/TNF/TC Series" are overload protection devices with high precision in cutoff torque and easy torque adjustment. We offer a flange type "TF Series" with a compact and efficient design, accurate torque transmission, and excellent operating characteristics, as well as a high-frequency type "TNF Series" that minimizes internal hysteresis losses. Additionally, we have a coupling type "TC Series" that possesses high rigidity in the direction of rotation. 【Features】 ■ Excellent cutoff torque precision ■ Easy adjustment of cutoff torque ■ Simple recovery operation after release ■ One-point setting ■ Excellent environmental resistance *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Servo-dex EVR2 Series" is a transfer mold drive device suitable for the press line for manufacturing motor cores for air conditioners and general-purpose motors. By suppressing vibrations during stops and achieving high-precision positioning, it reduces the maintenance of molds. It can be easily controlled with timing signals, enabling various control patterns. 【Features】 ■ Ensures reliability through a unique vibration absorption structure ■ Supports arbitrary transfer angle settings and various control patterns ■ Improves mold lifespan through high-precision positioning ■ Combination of servo feeder and servo dex (transfer device) ■ Achieves optimization of motor core lines *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RCD Series" is a CNC rotary table designed to meet the demands of machine tool manufacturers for faster (high speed) and more accurate (high precision) performance. Equipped with our zero-backlash reduction mechanism, "RollerDrive," it allows for faithful operation without disruption from external forces, unlike gears or torque motors. There is no degradation of internal components over long-term use, nor any aging changes in precision, and it boasts excellent durability, eliminating the need for regular calibration or adjustment. 【Features】 ■ No backlash (play) ■ High precision and efficiency ■ Preloaded for high rigidity ■ Reduced positioning time with clamp press processing ■ No aging degradation in precision, maintaining initial accuracy over long periods *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive(R) RA/RU/RW series" is a product that incorporates performance that cannot be achieved by a motor alone into a compact body. Power is transmitted from the input shaft to the output shaft via a roller follower, and the rolling transmission of the roller follower eliminates wear caused by meshing while maintaining the initial precision over a long period. A major feature of this product is that the unique preloading mechanism of the roller gear cam mechanism completely eliminates backlash generated by meshing, allowing for output motion that faithfully follows control commands. [Features] ■ RA: A high-end model that condenses roller drive technology into a highly manageable form. ■ RU: A versatile model that can be used for various applications. ■ RW: A high-performance model designed for heavy-load positioners. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive MR Series" is an ultra-compact zero-backlash positioner. It features a mechanism born from the pursuit of excellent functionality and performance. By mechanically reducing the speed of the motor, it achieves stability while also enabling zero backlash through a unique preloading mechanism, allowing for output motion that faithfully follows the input control commands. 【Features】 ■ The roller gear cam and roller follower eliminate backlash through unique preload adjustment ■ Maintenance-free ■ High flexibility in motor selection ■ Compatible with all orientations *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RGR Series" is a zero-backlash positioner born from the pursuit of excellent functionality and performance. Outstanding movement achieved through zero-backlash technology. Thanks to a backlash-free reduction mechanism enabled by rolling transmission and preload adjustment, it realizes high levels of precision, responsiveness, and rigidity, delivering stable performance over long periods. 【Features】 ■ Achieves high output torque with a compact servo motor ■ Strong against high loads and uneven loads ■ Lightweight and slim body *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive(R) RU Series" is a FA motion control unit that achieves exceptional movement through zero-backlash technology. By mechanically reducing the servo motor's speed, it gains tremendous torque, rigidity, and stability, while the unique preloading mechanism allows for backlash-free operation, enabling output actions that faithfully follow input control commands. This innovative product also features high efficiency and wear-free operation through rolling transmission, compact design due to the orthogonal layout of input and output shafts, and standard large-diameter hollow shafts, making it user-friendly. 【Features】 ■ Achieves high-load drive with a compact motor ■ Redesigned internal structure, cast iron housing, and high-rigidity output bearings ■ High freedom in selecting servo motors ■ Usable even in harsh environments *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RU Series" is a high-rigidity positioning unit that achieves high-load drive with a compact motor. It features a lineup of high reduction specifications using a unique reduction gear, allowing for significant driving force even with small servo motors. Additionally, it can accommodate a wide range of servo motor sizes, and the servo motors can be easily attached by coupling, making it simple for first-time users to install. 【Features】 ■ Achieves high-load drive with a compact motor ■ High flexibility in selecting servo motors ■ High rigidity ■ Usable even in harsh environments *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RA Series" is a high-precision zero-backlash positioner that enhances the performance of various FA devices. By mechanically reducing the speed of the servo motor, it achieves tremendous torque, rigidity, and stability, while also enabling faithful output motion in response to input control commands through its unique preloading mechanism that eliminates backlash. Additionally, it features high efficiency and wear-free operation due to rolling transmission, as well as a compact design with a standard large-diameter hollow shaft layout for the input and output axes, making it an innovative FA motion control unit that is easy to use. 【Features】 ■ Preloading - Completely eliminates backlash by making contact in a preloaded state with a wedge-shaped roller follower. - Adjustable via a mechanism on the input shaft side. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RGV Series Standard Model" is a lightweight and compact zero-backlash positioner that is strong against high loads and uneven loads. Thanks to a backlash-free reduction mechanism achieved through rolling transmission and pre-load adjustment, it realizes high levels of precision, responsiveness, and rigidity, providing stable performance over long periods. The compact design with a perpendicular layout of the input and output shafts, along with a large diameter hollow hole, ensures the expected long lifespan through the rolling transmission feature of this mechanism. 【Features】 ■ A wide range of reduction ratios and sizes available ■ Achieves high output torque with a small servo motor ■ Strong against high loads and uneven loads ■ Lightweight and compact *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Variax OPUS1 Series" is a high-performance servo feeder suitable for the manufacturing lines of motor cores for hybrid vehicles, PHEVs, and EVs. By integrating a high-performance servo motor and roll into a single structure, it achieves world-class performance. The drive servo motor operates with a unique cam curve, and both the upper and lower roll drives and the release mechanism also utilize servo motors and cam curves, enabling compatibility with thin sheets and soft materials. 【Features】 ■ High-end model pursuing high speed, high precision, and multifunctionality ■ Communication function allows for situation monitoring from a distance ■ Excellent operability and security system ■ Diverse display functions *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Cam Balancer" is a torque compensation device designed to be mounted on the input shaft of a cam-type indexing device (Sundex). It improves the output characteristics such as input characteristics from the motor to the input shaft and positioning accuracy, bringing the indexing operation closer to an ideal state. It was developed with the aim of completely offsetting the variable torque, which is considered to be the cause of common issues such as backlash and rotational irregularities in the input drive system. Essentially, a spring-type torque compensation device is employed, and a significant feature is the ability to set two notch values for the offset torque. 【Features】 ■ Standardization of cam shaft torque, resulting in reduced peak torque ■ Reduction in peak current allows for downsizing of the drive motor ■ Minimal influence from backlash and deflection in the input system ■ Decreased rotational irregularities of the cam shaft, resulting in a smaller backlash coefficient *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "Variax VG Series" is a high-speed gripper that achieves the gripping and feeding motion by combining four cam mechanisms to grasp and send materials. Unlike the common roll feed method that rolls materials to feed them, this gripping method utilizes static friction, that is, the maximum friction force, allowing for a reliable grip and feed. Additionally, it accommodates various feeding conditions such as feeding of irregular shapes and soft materials, fine feeding, ultra-high-speed feeding, and secondary processing feeding, which are considered difficult with the roll feed method. 【Features】 ■ A wide variety of models and sizes available, allowing for selection based on feeding conditions ■ Capable of ultra-high-speed feeding at up to 3,600 min-1 (VG15H) ■ Configuration suitable for irregular shapes and secondary processed materials ■ Compatible with connectors, IC lead frames, terminals, beverage cans, and more *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Technology

The "Liner Unit" is a cam-type linear drive device that achieves high-speed, high-power, and long stroke. Thanks to the excellent stability provided by the cam mechanism, it can handle sudden acceleration and deceleration, improving productivity through reduced cycle times. It can be used for the sliders of welding robots and handling robots. 【Features】 ■ Excellent stability due to the cam mechanism, capable of handling sudden acceleration and deceleration, and high-speed operation ■ Space-saving design by placing the drive on the rail ■ Long strokes are possible with connected rails, with no length restrictions ■ Multiple drives can be installed on a single rail ■ Achieves ±20μm precision through the cam mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Picking robots (shelf transport robots, arm picking robots)

The "Variax V Series" is a cam-type roll feed device that pursues ultra-high speed and high precision. It features a high-performance cam-type variable roll feed using a sector roll and four cam mechanisms, achieving outstanding feeding accuracy, operability, and workability. Incorporating innovative new technologies such as dual roll drive, parallel adjustment function for rolls and clamps, and an absolute digital counter system that accurately displays feeding length, it is widely used in press operations around the world. 【Features】 ■ Exceptional reliability due to cam drive ■ Easy and reliable adjustment of feeding length, material thickness, and grip force with button operation ■ Equipped with parallel adjustment function for rolls and clamps ■ Suitable for punching motor cores and producing connectors and lead frames ■ Has a long history and extensive track record *For more details, please refer to the PDF document or feel free to contact us.

• Processing Technology

The "SPC40/SPC50/SPC63" is a hydraulic-free APC unit that is high-speed, energy-efficient, and maintenance-free. By enabling high-speed pallet exchange, it reduces processing time, and the high-strength cam mechanism achieves maintenance-free long life. It is possible to reduce running costs without hydraulic systems. Please feel free to contact us if you have any inquiries. 【Features】 ■ High productivity - Reduces processing time with high-speed pallet exchange ■ Reliability - Proven track record with many machine tool manufacturers *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

This document introduces the "RollerDrive" product for factory automation (FA) applications. It provides detailed descriptions of features and structure, comparisons of series such as RGV and RGR, and examples of applications, using photos and tables. The content is designed to be easy to reference when selecting products. Please feel free to download and take a look. 【Contents (partial)】 ■Features ■Structural explanation ■Comparison of RollerDrive series for FA ■Application examples ■RollerDrive size lineup *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RSR Series" is a CNC rotary table designed for compact and lightweight small machining centers. With a maximum of 24+2 ports for rotary joints, it supports automation fixtures for seating, clamping, lifting, and accommodates multiple workpieces. It enables machining of large workpieces with #30MC, contributing to the automation of mass production and improved productivity. 【Features】 ■ Maximum 24+2 ports for rotary joints - Supports automation fixtures for seating, clamping, lifting, and accommodates multiple workpieces ■ 90-degree indexing / clamping press processing in as little as 0.46 seconds - Reduces non-cutting processing time due to high rotation speed and hydraulic brake-less operation *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RollerDrive RGV Series" is a zero-backlash positioner that can be made dustproof and waterproof. It has durability to withstand repeated harsh operations due to its roller gear cam mechanism, and it is maintenance-free thanks to rolling transmission and grease sealing. The large hollow diameter makes wiring easy, allowing for the installation of servomotors from various manufacturers. 【Features】 ■ Dustproof and waterproof capabilities (standard IP54 equivalent, optional IP67) ■ Durability to withstand repeated harsh operations due to the roller gear cam mechanism ■ Maintenance-free with rolling transmission and grease sealing ■ Easy wiring due to the large hollow diameter (Hollow diameter of RGV125 is Φ120mm) *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

"SANDEX" is a comprehensive catalog of products handled by Sankyo Seisakusho Co., Ltd. It includes detailed descriptions, explanations, product specifications, peripheral devices, and handling methods, presented with photos and diagrams. The content is designed to be easy to reference when selecting products. Please feel free to download and take a look. [Contents] ■A Explanation ■B Product Specifications ■C Peripheral Devices ■D Handling *For more details, please refer to the PDF document or feel free to contact us.

• Roller Jack

We conduct "strength verification" of the adhesive and attachment surfaces at the construction site. The target jig is "Round Jig 90ΦM12," and investigations for bolt diameters "M10/M12" are also possible for jigs other than the target jig. The maximum load is 6kN, and in response to the needs of the site, we have introduced a "tensile testing machine." 【Features】 ■ Easy investigation ■ Target jig: Round Jig 90ΦM12 (Part No. M90M-B12-125) ■ Compatible with bolt diameters M10 and M12 ■ Investigations for bolt diameters "M10/M12" are also possible for jigs other than the target jig *For more details, please refer to the PDF materials or feel free to contact us.

• Environmental Survey

Yasushin Co., Ltd. originally started as a stone shop called "Ishi no Sugita." Witnessing the devastation of tombs collapsed during the Great Hanshin-Awaji Earthquake, we developed and sold earthquake-resistant measures for tombs, known as "Yasushin Hakamo," and have numerous construction achievements. Currently, our products are also used in famous stone lanterns at temples across the country. 【Business Activities】 ■ Development and sales of "Yasushin Hakamo" ■ Development and sales of "Yasushin Adjuster" *For more details, please refer to the PDF materials or feel free to contact us.

• Earthquake-resistant construction method

This document introduces a preliminary diagnosis regarding the usability of the Anshin Adjuster. As part of the target object section, we have included a chart with criteria such as "the center of gravity of the object does not change" and "jacking up/lifting is possible." The content is designed to be easy to reference when introducing the product. Please feel free to contact us if you have any requests. 【Included Content (Partial)】 ■ The center of gravity of the object does not change ■ Jacking up/lifting is possible ■ There is space at the base of the object to attach a fixture ■ The object has existing adjusters at its base *For more details, please refer to the PDF document or feel free to contact us.

• Earthquake-resistant construction method

This document introduces a preliminary assessment of the usability of the seismic adjuster. As part of the flooring section, it includes a chart addressing whether "the environment allows for the removal of water and oil during installation" and "the floor is not tatami or carpet," among other considerations. The content is designed to be easily referenced when introducing the product. Please feel free to contact us if you have any requests. 【Included Content (Partial)】 ■ The environment allows for the removal of water and oil during installation ■ The floor is not tatami or carpet ■ The floor is not painted ■ The floor material is concrete, P-tile, asphalt, epoxy, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Earthquake-resistant construction method

The "RII square-shaped fixture" is an adjuster that can withstand seismic intensity level 7. The installation time is just 60 seconds, and it is easy to remove when relocating. We offer two types of existing bolt diameters: M12 and M16. It is suitable for those who feel the need for earthquake countermeasures such as "the equipment itself is lightweight, so there is no need for anchor fixation" and "I want to install it easily and cheaply." 【For customers like these】 ■ The equipment itself is lightweight, so there is no need for anchor fixation ■ I want to install it easily and cheaply ■ It is heavy equipment, but a slight effect to prevent shifting is sufficient ■ Easy to remove when relocating *For more details, please refer to the PDF document or feel free to contact us.

• Earthquake-resistant construction method