エアテックジャパン List of Products and Services

The "Hole Man AT-5" is a water-circulating, vibration-free drill used for drilling into exterior wall tiles and concrete. Because it uses a circulation system, there is no need for scaffolding to draw water or dispose of sludge. Typically, drilling with a vibration-free drill produces about 50 liters of sludge in a day, but with the Hole Man AT-5, this can be reduced to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 ■ Shorter length, more compact and lightweight design that is less likely to topple over on scaffolding ■ High-power motor with improved quietness ■ Customizable for safety and stability with a side handle or for mobility with a compact straight grip ■ Many other advantages! * For product details, please refer to the materials. Feel free to contact us for inquiries.

• Work tools

Core drilling can be performed with a hole diameter of 12.7/14.5/16.5/18.0/24.0 (φ). During temporary setup, a non-vibrating drill "Hole Man AT-5" can create clean holes of 18φ or 16.5φ in tiles, allowing for the dismantling of existing tiles without the need to re-bake them, saving both time and costs. Additionally, there is no concern about efflorescence, enabling construction regardless of seasonal weather. The low-noise, dust-free operation allows for work to be done in office buildings and hospitals without disruption. Since it is a circulation type, there is no need for scaffolding for water collection or sludge disposal. Typically, drilling operations with a non-vibrating drill produce about 50 liters of sludge in a day, but with the Hole Man AT-5, this can be reduced to about 1 kg, making it an environmentally friendly tool. Furthermore, since the coolant used is only tap water, running costs are kept low. Consumables from the Water Smashing AT series can also be used.

• Work tools

Remove the asbestos layer of about 2 to 5 mm using a 19 mm blaze bit, and drilling can be done with a dry vibration drill. This method is easy to implement even for workers accustomed to vibration drills, especially when asbestos is only present on the surface. The work consists of "two processes" of removal and drilling, but since the asbestos-containing waste is only from the wall surface, the amount of asbestos waste can be reduced compared to direct drilling. The waste will be solidified concrete, classified as asbestos-containing industrial waste. For details, please refer to the related link "Research Report on the Removal of Asbestos-Containing Construction Finishing Materials Using Water-Circulation Non-Vibrating Drills - Revised Edition." This is a lightweight and compact design water-circulation non-vibrating drill. It is low-noise and dust-free, allowing construction to be carried out even in office buildings and hospitals while occupied. Since it is a circulation system, there is no need for scaffolding for water collection or sludge disposal. Sludge waste can be reduced to about 1/50, and since the coolant is tap water, running costs can also be kept low. Consumable parts from the Water Smashing AT series can also be used.

• Work tools

It can be used at construction sites in a dedicated hard case with dustproof and waterproof functions. In the event of a fall or impact that causes a fire, it will detect the fire and activate the automatic extinguishing function. *This does not guarantee complete extinguishment. The non-vibrating drill Holeman AT-5 can be used for 440 holes (approximately 1.5 days), and a 1000W grinder can be used continuously for about 1.3 hours. The dustproof and waterproof functions are equivalent to IP53 (based on in-house testing). Dustproof rating (5) means that harmful amounts of dust do not enter the interior (not completely sealed, but does not interfere with the normal operation of the equipment). Waterproof rating (3) means it is protected against water falling from a vertical angle within 60 degrees (can withstand splashes of water from above at an angle).

• Batteries and Capacitors

Direct drilling into asbestos-containing exterior walls and the removal of asbestos finishing materials using dry vibration drill drilling is also possible. Core sampling for asbestos analysis allows for accurate analysis layer by layer, making it suitable for investigation companies. Waste can be mixed with cement using circulating water for concrete solidification. Excess circulating water and cleaning water are stabilized using high molecular water-absorbing polymers. Classification can be processed as asbestos-containing industrial waste. For details, please refer to our company's website for the "Research Report on the Removal of Asbestos-Containing Building Finishing Materials Using Water Circulation Type Vibration-Free Drills - Revised Edition." The "Hole Man AT-5" is a lightweight and compact design water circulation type vibration-free drill. It operates with low noise and dust, allowing construction to be carried out in offices and hospitals while occupied. Since it is a circulation type, there is no need for scaffolding for water collection or sludge disposal. Typically, drilling work with a vibration-free drill produces about 50 liters of sludge per day, but the Hole Man AT-5 can reduce this to about 1 kg, making it an environmentally friendly machine tool. Additionally, the coolant is only tap water, which helps keep running costs down. It is also compatible with the Water Smashing AT series.

• Work tools

Low noise and dust-free, allowing construction to be carried out in places like office buildings and hospitals without disruption. Since it is a circulation type, there is no need for scaffolding to lift water or dispose of sludge. Normally, drilling work with a non-vibrating drill produces about 50 liters of sludge in a day, but with the Holeman AT-5, this can be reduced to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 ■ High-performance exhaust blower enables continuous operation in summer ■ Equipped with an error mode that can handle voltage drops and overloads ■ Shorter length for a more compact, lightweight design that is less likely to tip over on scaffolding ■ Compact storage in a dedicated case ■ High-power motor with improved quietness ■ Stepless speed control for adjusting rotation speed ■ Customizable with a safe and stable side handle or a compact straight grip focused on mobility ■ Uses resin containing metallic powder for a more luxurious feel! ■ No need to purchase parts like grip pipes based on drilling depth or diameter ■ Compatible with consumable parts from the Water Smasher AT series.

• Work tools

The "Neck Roll Pin" is a decorative cap for tile detachment prevention work, made of brass and plastic, which does not rust. We ensure that the product is robust enough to withstand outdoor use exposed to wind and rain by considering the material, the compatibility of the materials, the plating, the adhesion of the paint to the plating, and the manufacturing process, among other factors. 【Features】 ■ Significantly improves work efficiency and aesthetics ■ Used by inserting into a fixed anchor with an injection port ■ The neck bends to align with the tile surface ■ Not affected by the insertion angle of the anchor ■ Coated with baked-on paint *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other fittings
• Fittings construction

This product is a dry wall connecting waterproof joint for neck roll pins that can be used even when there is a space between the outer wall and the structure. It can be used for neck roll pins with hole diameters of 16.5φ and 18φ, and is compatible with 4-inch and W1/2 wall connecting anchors. Additionally, a seal tape to prevent loosening is attached at the time of shipment. 【Features】 ■ Can use scaffolding neck roll pins even when there is a space between the outer wall and the structure ■ Protects the anchor from rust with waterproof putty and rubber ■ The putty bites into the screw threads while the rubber effectively waterproofs the outer circumference of the anchor ■ Long joint of 150mm can be cut on-site to suit the situation ■ Compatible with 4-inch and W1/2 wall connecting anchors * For construction instructions and handling manuals, please contact us. * For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Other fittings
• Fittings construction

The "Wall Connecting Neck Roll Pin Φ18 System" is a waterproof system with a decorative cap designed for wall connecting anchors used in scaffolding. Traditionally, these anchors were simply buried after installation, but this system allows for their reuse during renovations 10 to 15 years later. It prevents rainwater from entering from the outside with a waterproof bolt, without compromising the aesthetic design. We also offer a decorative cap for tile detachment prevention work called "Neck Roll Pin Small Diameter." 【Features】 ■ No need to remove tiles during installation ■ Compatible with stone walls and stone-like tiles that previously could not accommodate scaffolding ■ Wall anchors can be reused during the next renovation ■ Maintains aesthetics by leaving the anchor inside the wall with a decorative cap ■ Prevents water from entering the hole with a waterproof bottle *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Other fittings
• Fittings construction