エアテックジャパン List of Products and Services

Low noise and dust-free, allowing construction to be carried out in places like office buildings and hospitals without disruption. Since it is a circulation type, there is no need for scaffolding to lift water or dispose of sludge. Normally, drilling work with a non-vibrating drill produces about 50 liters of sludge in a day, but with the Holeman AT-5, this can be reduced to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 ■ High-performance exhaust blower enables continuous operation in summer ■ Equipped with an error mode that can handle voltage drops and overloads ■ Shorter length for a more compact, lightweight design that is less likely to tip over on scaffolding ■ Compact storage in a dedicated case ■ High-power motor with improved quietness ■ Stepless speed control for adjusting rotation speed ■ Customizable with a safe and stable side handle or a compact straight grip focused on mobility ■ Uses resin containing metallic powder for a more luxurious feel! ■ No need to purchase parts like grip pipes based on drilling depth or diameter ■ Compatible with consumable parts from the Water Smasher AT series.

The "Hole Man AT-5" is a water-circulating, vibration-free drill used for drilling into exterior wall tiles and concrete. Because it uses a circulation system, there is no need for scaffolding to draw water or dispose of sludge. Typically, drilling with a vibration-free drill produces about 50 liters of sludge in a day, but with the Hole Man AT-5, this can be reduced to around 1 kg, making it an environmentally friendly machine tool. Additionally, since the coolant is only tap water, running costs are kept low. 【Features】 ■ Shorter length, more compact and lightweight design that is less likely to topple over on scaffolding ■ High-power motor with improved quietness ■ Customizable for safety and stability with a side handle or for mobility with a compact straight grip ■ Many other advantages! * For product details, please refer to the materials. Feel free to contact us for inquiries.

The "Wall Connecting Neck Roll Pin Φ18 System" is a waterproof system with a decorative cap designed for wall connecting anchors used in scaffolding. Traditionally, these anchors were simply buried after installation, but this system allows for their reuse during renovations 10 to 15 years later. It prevents rainwater from entering from the outside with a waterproof bolt, without compromising the aesthetic design. We also offer a decorative cap for tile detachment prevention work called "Neck Roll Pin Small Diameter." 【Features】 ■ No need to remove tiles during installation ■ Compatible with stone walls and stone-like tiles that previously could not accommodate scaffolding ■ Wall anchors can be reused during the next renovation ■ Maintains aesthetics by leaving the anchor inside the wall with a decorative cap ■ Prevents water from entering the hole with a waterproof bottle *For more details, please refer to the PDF materials or feel free to contact us.

This product is a dry wall connecting waterproof joint for neck roll pins that can be used even when there is a space between the outer wall and the structure. It can be used for neck roll pins with hole diameters of 16.5φ and 18φ, and is compatible with 4-inch and W1/2 wall connecting anchors. Additionally, a seal tape to prevent loosening is attached at the time of shipment. 【Features】 ■ Can use scaffolding neck roll pins even when there is a space between the outer wall and the structure ■ Protects the anchor from rust with waterproof putty and rubber ■ The putty bites into the screw threads while the rubber effectively waterproofs the outer circumference of the anchor ■ Long joint of 150mm can be cut on-site to suit the situation ■ Compatible with 4-inch and W1/2 wall connecting anchors * For construction instructions and handling manuals, please contact us. * For more details, please refer to the PDF materials or feel free to contact us.

Core drilling can be performed with a hole diameter of 12.7/14.5/16.5/18.0/24.0 (φ). During temporary setup, a non-vibrating drill "Hole Man AT-5" can create clean holes of 18φ or 16.5φ in tiles, allowing for the dismantling of existing tiles without the need to re-bake them, saving both time and costs. Additionally, there is no concern about efflorescence, enabling construction regardless of seasonal weather. The low-noise, dust-free operation allows for work to be done in office buildings and hospitals without disruption. Since it is a circulation type, there is no need for scaffolding for water collection or sludge disposal. Typically, drilling operations with a non-vibrating drill produce about 50 liters of sludge in a day, but with the Hole Man AT-5, this can be reduced to about 1 kg, making it an environmentally friendly tool. Furthermore, since the coolant used is only tap water, running costs are kept low. Consumables from the Water Smashing AT series can also be used.