畑中産業 List of Products and Services

"New Sand Block" is a pre-mixed sand mortar that has been improved for use as a base layer for blocks, foundations, and RC (reinforced concrete) surfaces. Its moderate viscosity, trowel spreadability, and ease of trowel sliding enhance work efficiency and reduce fatigue. 【Standard Mix】 ○ New Sand Block: 1 bag ○ HS Morubon: 1 kg ○ Water: Approximately 11 liters For more details, please contact us or download the catalog.

"Styrene-based New Sand Mortar" is a pre-mixed lightweight mortar made from styrene sand and cement. Since on-site mixing is not required, it can speed up plastering work. There is no worry about styrene scattering in the wind, and a stable quality base coat mortar can be obtained. 【Coating Thickness and Application Area】 ○ 4mm thickness: 8.1 m² ○ 6mm thickness: 5.5 m² For more details, please contact us or download the catalog.

Exterior Wall Special Lightweight Pre-Mixed Mortar "PH Mortar" is a pre-mixed mortar that has a low occurrence of cracks. It is easy to apply in a follow-up coating. It is ideal as a base for brush application, painting, and spraying. 【Coating Thickness and Application Area】 ○ Coating Thickness: 5mm, Application Area: 5.0m² ○ Coating Thickness: 10mm, Application Area: 2.5m² ○ Coating Thickness: 15mm, Application Area: 1.7m² For more details, please contact us or download the catalog.

Lightweight premixed mortar "PH Mortar L" is a mortar that has a low occurrence of cracks. It is easy to apply in a follow-up coat. It is ideal as a base for brush application, painting, and spraying. 【Coating Thickness and Coverage Area】 ○ Coating Thickness: 5mm, Coverage Area: 5.2m² ○ Coating Thickness: 10mm, Coverage Area: 2.6m² ○ Coating Thickness: 15mm, Coverage Area: 1.7m² For more details, please contact us or download the catalog.

"Waterproof Kiso Mortar" is a pre-mixed waterproof mortar for foundations that prevents efflorescence by eliminating water absorption in the mortar. It contains a special waterproofing agent. It is lightweight, easy to work with, and allows for easy troweling. [Features] - No secondary efflorescence - Lightweight - Contains a special waterproofing agent For more details, please contact us or download the catalog.

New Kiso Mortar is a lightweight pre-mixed mortar that emphasizes a brushed finish and is ideally formulated with only inorganic aggregates. It is lightweight and easy to work with, allowing for easy brushed and troweled finishes. 【Coating Thickness and Application Area】 ○5mm 4.4m² ○10mm 2.2m² For more details, please contact us or download the catalog.

The 'Thick Coating Mortar for Floors' is a finishing material specifically designed for repairing rain damage after concrete pouring and for renovating old floor surfaces. It boasts excellent compressive strength, adhesion strength, and abrasion resistance, making it suitable for vehicle and lift traffic. Resin finishes such as epoxy and urethane are also compatible. It offers good workability and allows for a smooth finish. 【Specifications】 ○ Mixing yield: 15ℓ ○ Standard coating thickness: 5–10mm ○ Coverage area: 5mm - 3m² 10mm - 1.5m² For more details, please contact us or download the catalog.

"Floor Thin Coating Mortar" is a finishing material specifically designed for indoor concrete surfaces, ideal for repairing rain damage after concrete pouring or renovating old floors. It boasts excellent compressive strength, adhesion strength, and abrasion resistance, making it suitable for vehicle and lift traffic. Resin finishes such as epoxy and urethane are also compatible. It offers good workability and allows for a smooth finish. 【Specifications】 ○ Mixing yield: 16ℓ ○ Standard application thickness: 1–3mm ○ Coverage area: 2mm, 8m² For more details, please contact us or download the catalog.

Our company offers the ultra-fast hard mortar and paving material "HS Pat Katamar." It is very convenient for fence and carport construction. 【Features】 ■ No need for temporary fixing ■ No mixing required as water is added ■ No salt content, making it less likely for posts to rust ＼ For more details, please check by downloading the catalog ／

The new lightweight aggregate "H·S Sand" for undercoat mortar uses fine particles of expanded plastic as the main aggregate, which is blended with adhesives, thickeners, and water-retaining agents in the factory. It is a new lightweight aggregate used for plastering undercoat mortar. 【Features】 ■ Excellent adhesion in addition to preventing cracks and peeling ■ Energy-saving plastering material ■ Usable for a wide range of applications from thin to thick coatings ■ Lightweight and easy to apply, significantly improving work efficiency ＼ For more details, please check by downloading the catalog ／

"H・S Mild Sand II" is a lightweight aggregate for cement mixing that uses calcium carbonate foam as its main raw material. It effectively absorbs and disperses the drying shrinkage of concrete structures and topcoat mortars, preventing delamination and cracking of finishing materials. It can be applied in thin layers or built up with multiple coats, allowing for easy adjustment of thickness. With moderate elasticity, it provides uniform pressure from troweling and excellent adhesion. 【Features】 ○ High work efficiency ○ Fatigue reduction effect ○ Cost reduction For more details, please contact us or download the catalog.

An essential material in Japanese architecture, lime plaster. 'HS Tile Lime Plaster' breathes new life into this traditional world. By utilizing new materials, performance has been significantly improved. It keeps buildings strong and beautiful for a long time. Available in two colors: black and white. 【Features】 ■ High Adhesion ⇒ Exhibits excellent adhesion to various roofs such as clay tiles and glazed tiles! ■ Low Water Absorption ⇒ Characterized by low water absorption, making it resistant to cold and freeze damage. ■ High Strength ⇒ Stronger against bending and compression than traditional lime plaster, with excellent seismic resistance. ■ Stability ⇒ Minimal length changes due to shrinkage, ensuring stable physical properties. *For more details, please contact us or download the catalog below.

The Yamato Shikkui Series "Undercoat" is a primer for interior finishing materials. 【Features】 ■ Just add water and mix ■ Prevents resin, stains, and discoloration ■ Improves adhesion of finishing materials ■ Smooth application of finishing materials due to moisture control ＼ For more details, please check by downloading the catalog ／

"Daiwa Shikkui" is an interior and exterior white wall material that is ideally blended with high-quality funori and kusa using high-purity slaked lime. It can be used not only for interior and exterior applications but also for roof plaster. Additionally, please note that when applying externally, it should be done in areas such as under eaves where it is less exposed to rain. [Features] - Ideally blended high-purity slaked lime with high-quality funori and kusa - Usable for both interior and exterior applications as well as roof plaster *For more details, please download the PDF or feel free to contact us.

Thank you very much for your continued support. We are pleased to present the latest version of our comprehensive catalog, focusing on exterior products from Hatanaka Sangyo Co., Ltd. Our product range, which combines the texture of natural materials with high functionality, excels in aesthetics, workability, and durability, making it suitable for a wide range of applications, including residential, public facilities, and commercial spaces. Hatanaka Sangyo has a history of over 50 years and provides products that support the creation of "comfortable and beautiful spaces" from Nara to the entire country. We hope you find this catalog helpful for your space design and construction. If you have any questions or requests, please feel free to contact us. We look forward to your continued support. Sincerely.

Main Features of Harmonita Turf Neo ●Significantly reduces static electricity Ultra-fine static electricity suppression fibers are sewn in approximately 21,000 places per cubic meter. This suppresses the generation of uncomfortable static electricity due to friction, achieving a comfortable user experience. ●Fluffy texture with ultra-high-density stitching The grass fibers, made from a combination of straight thread (PE) and crimped thread (PP), support each other to exhibit high uprightness and resilience. The touch feel is also outstanding. ●C-shaped grass fibers for softness and resistance to flattening The grass fibers are C-shaped, balancing softness and shape retention. They look natural and replicate the texture of real grass. ●High durability and workability with urethane backing processing The grass fibers are resistant to shedding, and cutting is easy. The underside is coated with a special coating, providing a structure that is strong against wear and deterioration. ●Passed various tests Cleared flame retardancy tests, weather resistance tests (2,000 hours = approximately 10 years equivalent), abrasion resistance tests (exceeding FIFA standards), heavy metal tests, and more.

This is a kit that allows you to experience our design mortar "KORT." As a first step towards the high-end finishing material "KORT," we have commercialized a small area kit (0.8 to 1.0 square meters). It can be used for wall accents, kitchen counters, and furniture remakes. We offer 22 colors, and sample boards in your desired color are also available. Please try it as an easy, reliable, and satisfying experience set! The design mortar "KORT" is an environmentally friendly design mortar that replaces some of the cement and silica fume with recycled materials. It features a fine texture that expresses sedimentary rock, with a smooth and silky touch. Its characteristic is the changing appearance and durability over time. We have achieved realistic quality and low cost through domestic production. **Features** - A fine-textured design mortar that expresses sedimentary rock - A collection of particles that creates a naturally elegant space - A smooth and silky touch - A rich variety of colors and textures to freely express your individuality - Changing appearance and durability over time

Fence and carport post construction, How "no-mixing mortar" can change the job site— We have summarized the answer in an easy-to-understand comic. "HS Pat Katamal" is a super-fast hardening mortar that requires no mixing and hardens in as little as 5 minutes. It is a "friend of the job site" that allows both newcomers and veterans to achieve the same quality finish. 【Points Explained in the Comic】 - Why can the construction period be significantly shortened just by not mixing? - The secret to simple procedures that even novice workers won't get confused by. - Reasons why the burden is greatly reduced even for older workers and small teams. - Time-saving benefits that are supported in urban areas and exterior construction. 【Check it out in the comic first!】 You can understand it faster and more intuitively than reading text. This material has received positive feedback for being easy to understand as it directly depicts the challenges faced on the job site.