光洋電機 List of Products and Services

● Equivalent to 20W straight tube FL20, FLR20 ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but some fixtures using starter tubes can be used without wiring work. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use with circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.

● Equivalent to a 40W straight tube: FL40, FLR40, (FHF32) ● Rated input voltage: 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but in some fixtures using a starter, it can be used without wiring work. (*) For fixtures using a starter, you can use the included dummy starter to avoid wiring work. (*) When using a dummy starter, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using a power factor correction capacitor ballast, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use in circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.

● Input voltage: 100-242V ● Single-side power supply / Built-in power supply type ● Made of polycarbonate ● Slim & user-friendly G13 socket design Adopts the same G13 socket as conventional fluorescent lamps (FL fixtures, Hf fixtures), allowing for direct replacement in existing fluorescent lamp fixtures. The tube diameter is approximately 26mm, making it slim enough to fit smoothly into existing fixtures. *It is necessary to remove the ballast during electrical work. ● Energy efficiency and energy-saving effect This product maintains high efficiency while providing brightness comparable to conventional FL and Hf fluorescent lamps. Specifications can be selected according to the application. ● Rotatable socket for freedom of light direction Without depending on the shape of existing fluorescent lamp fixtures, the socket can be rotated to adjust the angle of light. Light can be directed towards walls or displays as desired. By adjusting the direction of light, it can be utilized efficiently, creating a sense of space. ● Adoption of single-side power supply Wiring adopts a single-side supply. During installation, it is necessary to remove the ballast from the existing fluorescent lamp fixture and connect directly with a single-side power supply.

Single-sided power supply / Built-in power supply type General lighting at ambient temperatures of -20 to +45°C Glass lamp tube with shatterproof function (e.g., for food industry applications) 【Safety Advice】 Not suitable for use with electronic control devices. If appropriate moisture-proof lighting fixtures are used according to the data sheet and installation instructions, outdoor use is also possible. There are limitations to the operating temperature range of the LED tube. If you have any questions about suitability for your application, please measure the surface temperature (Tc) of the product before installation.

● Equivalent to 20W and 40W straight tubes ● Rated input voltage 100-240V ● Dual-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required. ● In some lighting fixtures that use starter tubes, wiring work may not be necessary. (*) For fixtures that use starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a risk of flickering or failure to light due to the condition of the ballast (such as aging). In that case, please remove the dummy starter tube and perform wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use in circuit or emergency lighting fixtures, or in emergency exit light fixtures under any circumstances.

● Equivalent to straight tube 6.55W ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required. ● In some lighting fixtures using starter tubes, wiring work is not necessary for use. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for single-sided power supply.