光洋電機 List of Products and Services

[Usage Precautions] - Do not look directly at the light with the naked eye while it is on. Also, ensure that reflected light does not enter your eyes, as it can cause eye pain or vision impairment. - Do not expose your skin directly to ultraviolet rays, as it can cause skin inflammation. - Always use with dedicated equipment. Do not use for general lighting purposes under any circumstances. - Due to the effects of ultraviolet radiation, the degradation of surrounding materials such as resin will occur more quickly than with standard lamps.

• Fluorescent Light Type

Oven lamp / Heat resistant up to 300°C (maximum ambient temperature of 450°C when the lamp is off) For use with shielded lighting fixtures only

• lamp

【Compatible with fluorescent lamps】 ■Model numbers: FG-1E・FG-1P Linear fluorescent lamps: 10W, 15W, 18W, 20W, 30W Circular fluorescent lamps: 15W, 20W, 30W Compact fluorescent lamps: 9W, 13W, 18W, 27W ■Model number: FG-4P Linear fluorescent lamps: 35W, 36W, 40W Circular fluorescent lamps: 40W Compact fluorescent lamps: 36W, 40W

• Fluorescent Light Type

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Halogen bulbs

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Halogen bulbs

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

Single-sided power supply / Built-in power supply type General lighting at ambient temperatures of -20 to +45°C Glass lamp tube with shatterproof function (e.g., for food industry applications) 【Safety Advice】 Not suitable for use with electronic control devices. If appropriate moisture-proof lighting fixtures are used according to the data sheet and installation instructions, outdoor use is also possible. There are limitations to the operating temperature range of the LED tube. If you have any questions about suitability for your application, please measure the surface temperature (Tc) of the product before installation.

• Fluorescent Light Type

- Specifications that allow for the direct use of existing ballasts. - Smooth equipment updates to LED while minimizing on-site burden. - Equivalent brightness with natural light similar to existing compact fluorescent lamps. - Reduced power consumption compared to existing compact fluorescent lamps. - Limited replacement frequency due to a rated lifespan of 30,000 hours. - Lower running costs, contributing to long-term cost reduction. *For product details, please refer to the "Product Catalog" and "Specifications."

• Downlight

● Equivalent to 20W and 40W straight tubes ● Rated input voltage 100-240V ● Dual-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required. ● In some lighting fixtures that use starter tubes, wiring work may not be necessary. (*) For fixtures that use starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a risk of flickering or failure to light due to the condition of the ballast (such as aging). In that case, please remove the dummy starter tube and perform wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use in circuit or emergency lighting fixtures, or in emergency exit light fixtures under any circumstances.

• Fluorescent Light Type

● Equivalent to straight tube 6.55W ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required. ● In some lighting fixtures using starter tubes, wiring work is not necessary for use. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for single-sided power supply.

• Fluorescent Light Type

This is a popular fluorescent lamp designed with an emphasis on cost-effectiveness. According to the international treaty "Minamata Convention on Mercury," the production of fluorescent lamps will end in 2027. We kindly ask you to consider purchasing them soon.

• lamp

According to the international treaty "Minamata Convention on Mercury," the production of fluorescent lamps will end in 2027. We kindly ask you to consider making your purchase soon.

• lamp

- Automatically charges the battery while in use - Automatically lights up like an emergency light when a power outage is detected - Portable with the included switch-equipped socket - Can be used as a flashlight in emergencies by simply gripping the base to turn it on

• Bulb Type

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Bulb Type

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• Bulb Type

Hf32W×2 lamp type (5200lm)・FL40W×1 lamp type (2000lm)

• Fluorescent Light Type

◆Compact fluorescent lamp (EFD), for replacement of incandescent bulbs ◆Brightness equivalent to a 50W incandescent bulb ◆Wide beam type with a 200° beam angle ◆Horizontal insertion downlight ◆Compatible with damp-proof and rain-proof fixtures, sealed fixtures, and insulation installation fixtures ◆Not compatible with dimmers

• Bulb Type

● Input voltage: 100-242V ● Single-side power supply / Built-in power supply type ● Made of polycarbonate ● Slim & user-friendly G13 socket design Adopts the same G13 socket as conventional fluorescent lamps (FL fixtures, Hf fixtures), allowing for direct replacement in existing fluorescent lamp fixtures. The tube diameter is approximately 26mm, making it slim enough to fit smoothly into existing fixtures. *It is necessary to remove the ballast during electrical work. ● Energy efficiency and energy-saving effect This product maintains high efficiency while providing brightness comparable to conventional FL and Hf fluorescent lamps. Specifications can be selected according to the application. ● Rotatable socket for freedom of light direction Without depending on the shape of existing fluorescent lamp fixtures, the socket can be rotated to adjust the angle of light. Light can be directed towards walls or displays as desired. By adjusting the direction of light, it can be utilized efficiently, creating a sense of space. ● Adoption of single-side power supply Wiring adopts a single-side supply. During installation, it is necessary to remove the ballast from the existing fluorescent lamp fixture and connect directly with a single-side power supply.

• Fluorescent Light Type

● Equivalent to 20W straight tube FL20, FLR20 ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but some fixtures using starter tubes can be used without wiring work. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use with circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.

• Fluorescent Light Type

● Equivalent to a 40W straight tube: FL40, FLR40, (FHF32) ● Rated input voltage: 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but in some fixtures using a starter, it can be used without wiring work. (*) For fixtures using a starter, you can use the included dummy starter to avoid wiring work. (*) When using a dummy starter, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using a power factor correction capacitor ballast, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use in circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.

• Fluorescent Light Type

Base (standard designation): G5 Tube diameter: 16 mm 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• lamp

Base (standard designation): G13 Tube diameter: 26 mm 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• lamp

Single-ended four-pin plug-in 2G7 base 865 Cool Daylight 840 Cool White 830 Warm White 827 LUMILUX INTERNA

• lamp

Single-ended four-pin plug-in G24q base 865 Cool Daylight 840 Cool White 830 Warm White 827 LUMILUX INTERNA

• lamp

Single-ended four-pin plug-in 2G11 base 865 Cool Daylight 840 Cool White 830 Warm White 827 LUMILUX INTERNA

• lamp

Single-ended two-pin plug-in G23 & GX23 base 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• lamp

Single-ended two-pin plug-in G24d base 865 Cool Daylight 840 Cool White 830 Warm White 827 INTERNA

• lamp

Beam spread: SP: narrow angle (10°) FL: medium angle (24°) Color temperature: WDL: 3000K

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, a company of the former Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.

• lamp

Equivalent to a standard 60W incandescent bulb - Approximately 80% energy saving - Lifespan about 8 times longer

• lamp

Equivalent to a standard 100W incandescent bulb - Approximately 80% energy saving - Lifespan about 8 times longer

• lamp

Halogen lamp 12V Base G4 Type ST PIN 10 (0.9W) → 64405S (J12V5WS) ST PIN 20 (1.8W) → 64415S (J12V10W-AXS) ST PIN 30 (2.4W) → 64425S (J12V20W-AXS)

• lamp

Halogen lamp 12V Base G4 Type ST PIN 10 (0.9W) → 64405S (J12V5WS) ST PIN 20 (1.8W) → 64415S (J12V10W-AXS) ST PIN 30 (2.4W) → 64425S (J12V20W-AXS)

• lamp