スペースワークス List of Products and Services

1. Various abnormal temperatures can be detected with zero standby power. (Eco technology) 2. By being able to detect various abnormal temperatures, inspection work and maintenance management can be carried out reliably and safely. 3. Abnormal temperatures of various industrial equipment and electrical devices can be monitored on a daily basis. 4. It can prevent ignition caused by abnormal temperatures of industrial equipment and electrical devices that could lead to a fire. 5. By using shape memory alloy (restoration) and wire (softening) to create a short circuit (contact) between the two wires, abnormal temperatures are detected and converted into a signal. [Set temperature 80°C] 6. It is a simple, easy, and highly accurate eco-technology product with zero standby power due to its switching function. 7. It can detect temperature and signal simultaneously, and the circuit configuration (switching function) is simple and low-cost. 8. Shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 9. The operation is a physical action that does not require power, is free from malfunctions, and can be used swiftly and accurately for many years. 10. Temperature detection can be done directly without the need for measuring instruments. 11. It is non-resettable, allowing for confirmation after activation. (Once detected, it cannot be reactivated. The activated part can be deleted and reconnected.)

• DC Power Supply
• Emergency alarm system
• Solar power generation equipment

■Features of the EOG Sterilization Monitoring Device 1. Allows for easy measurement of EO concentration and EO residual concentration within the EO gas sterilizer. 2. Capable of measuring EO gas concentration in both continuous automatic (monitoring mode) and manual (measurement instruction mode) settings. 3. Enables safe and efficient (cost-effective) sterilization operations by measuring EO concentration. 4. Allows for actual monitoring and evaluation of EOG sterilization, measurement of residual EO concentration and safety evaluation, and record management through external output. 5. Can automatically and continuously measure EO gas concentration in multiple EOG sterilizers with a single EOG monitoring device. 6. Easy to install and move, and is a gas analysis device specifically designed for measuring EO gas concentration. ■Effects of the EOG Sterilization Monitoring Device 1. Complies with the Ministry of Health, Labour and Welfare's requirement for recording ethylene oxide (EO) sterilization conditions. 2. Meets the requirements for inspections by the U.S. FDA (Food and Drug Administration) regarding export approvals for medical devices intended for the U.S. market. 3. Complies with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. 4. Capable of providing detailed reports to clients, such as contract sterilization service providers.

• Welfare and medical equipment
• Barrier-free facilities
• Clean Room

■Features of Various Safety Alarms 1. An eco-friendly product with zero standby power that includes emergency alarms, security alarms, and fire alarms. *Detection temperature (80℃) 2. Capable of various safety measures to prevent accidents and fires before they occur. 3. A fire alarm with security features, adaptable to various industries and applications. 4. Installation and relocation are easy for anyone. 5. Can be moved and installed in various locations. It is compact and lightweight. 6. A product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. ■Features of Fire Memory Sensors / Fire Detection Wires 1. Fire memory sensors use wires and shape memory alloys to short-circuit between two wires to generate a detection signal. 2. Fire detection wires utilize extended wires and multiple shape memory alloys to short-circuit between two wires to generate a detection signal. 3. Simple, easy, and accurate, this eco-technology product has zero standby power with a switching function. 4. Shape memory alloys have permanent memory, are rust-free, and maintain their state once activated. 5. Activation requires no power source, operates physically without false triggers, and can be used accurately and swiftly for many years. 6. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location must be deleted and reconnected.)

• Safety and consumables
• Disaster prevention supplies
• Safety Supplies

■Features of Construction Fire Alarm System 1. This is a construction fire alarm system that combines fire detection wires and alarms. It is an eco-friendly product with zero standby power. 2. By simply extending and wiring the fire detection wires, a wide fire alert area can be established, completing the installation. 3. It can quickly detect fires caused by the use of flammable materials at construction sites. 4. It can be easily installed in areas where flammable materials are used at construction sites. Installation and relocation are simple. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to detect temperature and send a signal. 6. It directly senses temperature and sends signals through physical operation without the need for power sources or measuring devices. 7. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 8. The product integrates numerous shape memory alloys at equal intervals of 0.5m along the wire (set temperature 80°C). 9. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, detect temperature, and send a signal. 10. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 11. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Disaster prevention supplies
• Safety Supplies
• Safety and consumables

■Features of Temperature Detection Sensors for Power Generation 1. Continuously monitors and detects abnormal temperatures in the power supply circuit's wiring. 2. Continuously monitors and detects abnormal heating (abnormal temperatures) in control devices, load devices, and storage batteries. 3. Inspection tasks for electrical circuits can be performed by anyone, ensuring reliable and safe maintenance management. 4. Continuously monitors abnormal temperatures in the electrical equipment of solar power generation systems, preventing equipment damage and fire, thus ensuring safe power supply. 5. Utilizes shape memory alloy (restoration) and wiring (softening) to detect abnormal temperatures (maximum allowable temperature) by short-circuiting (contacting) the two wire cores, generating a signal. [Set temperature 70°C] 6. A simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 7. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 8. Shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 9. Operation is based on physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 10. Direct temperature detection is possible without the need for measuring instruments. 11. Non-resettable, allowing for confirmation after activation. (Once activated by detection / cannot be reactivated. Delete the activation point and change the connection.)

• DC Power Supply
• Power generation equipment
• Solar power generation equipment

■Features of Temperature Detection Sensors 1. Monitors abnormal temperatures of electrical wires on a daily basis and can detect abnormal temperatures. 2. Monitors abnormal temperatures of power (control) equipment and electrical (load) equipment on a daily basis and can detect them. 3. Can be wired similarly to electrical wires in electrical installations. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to detect abnormal temperatures by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is 70°C. 5. A simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. Can detect temperature and signal simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction, and can be used for many years with speed and accuracy. 9. Allows direct temperature detection without the need for measuring instruments. 10. Can be used for indoor and outdoor wiring. 11. Non-resettable, allowing for confirmation after activation. (Once activated by detection / cannot be reactivated. Remove the activated location and change the connection.)

• Lighting outlet equipment
• Power Equipment
• Monitoring and Control Equipment

1. The abnormal temperature of the power circuit's wiring can be monitored and detected on a daily basis. 2. The abnormal heat generation (abnormal temperature) of control devices, load devices, and storage batteries can be monitored and detected on a daily basis. 3. Inspection tasks for electrical circuits can be performed by anyone. Additionally, maintenance management can be carried out reliably and safely. 4. It is possible to prevent fires caused by abnormal temperatures in electrical equipment that could lead to recalls. 5. Safety management for electric vehicles (EVs) is enhanced, allowing for safe driving of electric vehicles (EVs). 6. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between two wires, abnormal temperatures (maximum allowable temperature) can be detected and signaled. [Set temperature 70°C] 7. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 8. It can detect temperature and signal simultaneously, with a simple circuit configuration (switching function) at a low cost. 9. Shape memory alloys have permanent memory, are rust-free, and maintain their shape indefinitely once activated. 10. Operation is a physical action that requires no power, is free from malfunctions, and can be used accurately and swiftly for many years. 11. Temperature detection can be performed directly without the need for measuring instruments. 12. It is a non-reset type that allows for confirmation after operation. (Once activated by sensing, it cannot be reactivated. The activated location can be deleted and connections changed.)

• DC Power Supply
• Power generation equipment
• Solar power generation equipment

■Characteristics of Temperature Detection Lines 1. Abnormal temperatures of electrical wires can be monitored regularly and detected collectively. 2. Abnormal temperatures of power (control) equipment and electrical (load) equipment can be monitored regularly and detected collectively. 3. Wiring similar to that of electrical equipment can be achieved. 4. By utilizing shape memory alloys (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, abnormal temperatures are detected and converted into signals. 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloys have permanent memory, are rust-free, and maintain their state once activated. 8. Operation is a physical action that does not require power, ensuring no malfunction and allowing for swift, precise use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It can be used for indoor and outdoor wiring. 11. It is a non-latching type that allows for confirmation after activation. (Once triggered, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Lighting outlet equipment
• Power Equipment
• Monitoring and Control Equipment

■ Features of the EO Gas Concentration Meter (EOM-3000) 1. It allows easy measurement of EO concentration and residual EO concentration inside EO gas sterilizers. 2. It can perform EO gas concentration measurements in both continuous automatic (monitoring mode) and manual (measurement instruction mode). 3. By measuring EO concentration, safe and efficient (cost-effective) sterilization operations can be conducted. 4. It enables actual monitoring and evaluation of EOG sterilization, measurement of residual EO concentration and safety evaluation, and external output (such as to recorders). 5. It is an EO gas analysis device specialized for EO gas concentration measurement. ■ Effects of the EO Gas Concentration Meter (EOM-3000) 1. It enables compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. 2. It allows for compliance with inspections by the U.S. FDA (Food and Drug Administration) regarding export approvals for medical devices intended for the U.S. market. 3. It enables compliance with ISO requirements for measuring residual EO concentration and the obligation to record ethylene oxide (EO) sterilization conditions. 4. It allows for reporting details to clients such as contract sterilization service providers.

• Welfare and medical equipment
• Cooking facility equipment and supplies

■Features of Abnormal Temperature Sensing Wire 1. Capable of detecting various types of abnormal temperatures. 2. Able to detect abnormal temperatures in industrial equipment, electrical devices, and electrical wiring. 3. Can detect abnormal temperatures early to prevent equipment damage and fires. 4. Allows for regular comprehensive monitoring of abnormal temperatures, ensuring reliable and safe maintenance management. 5. Directly senses temperature through physical operation without the need for power supply or measuring devices, and can detect it as a signal. 6. When the surrounding temperature reaches an abnormal temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 7. A product that integrates multiple shape memory alloys at equal intervals along an extended wire. (Set temperature 80°C) 8. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing temperature and generating a signal. 9. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. A product that meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. 12. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated section can be removed and reconnected.)

• Facility Design
• Other commercial buildings and service facilities

■Features of Ceiling Holes (Construction) 1. Wiring and cabling in the ceiling space can be done from indoors after the ceiling work is completed. 2. Wiring for information communication systems (IT) and various electrical works can be easily done from indoors in the ceiling space. 3. Not only electrical wires, but also piping for air conditioning refrigerants and air ducts can be installed from indoors to the ceiling space. 4. Wiring can be easily done from indoors to the ceiling space without becoming exposed, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 5. Construction time can be reduced by half (1/2) and construction costs can be lowered by one third (1/3), allowing for safe work and easier electrical installations. ■Features of Ceiling Holes (Product) 1. It is a round inspection opening (entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even in ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Piping and electrical wiring materials
• Interior construction

■Features of Ceiling Hole Construction Technology 1. Electrical work (ceiling wiring) can be done from inside after the ceiling construction is completed. 2. Wiring and installation of electrical equipment and various sensors for new construction, renovations, and extensions can be easily done from inside. 3. Wiring and installation of electrical equipment and various sensors can be easily done from inside without exposed wiring, preserving the interior design of the building and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced (by half), and construction costs can be lowered (by one-third), allowing for safe work and easy electrical construction. 5. Connection verification and inspection can be easily performed from inside, making maintenance tasks easier.

• Inspection hatches, manhole covers, and ditch covers
• Interior construction
• Other commercial buildings and service facilities

■Features of the Ceiling Stand 1. The installation of ceiling-mounted detectors, wiring, and fixture mounting can be completed all at once after the ceiling work is finished. 2. Fire testing, operation confirmation, and installation position verification of ceiling-mounted detectors can be done from indoors. 3. Wiring can be done from indoors to the ceiling space without exposed wiring, maintaining the building's aesthetic and providing a good finish. 4. Shortened construction time (by half), reduced construction costs (by one-third), safer work conditions, and easier installation of fire prevention equipment. 5. Maintenance work and fire prevention management become safer and easier.

• Inspection hatches, manhole covers, and ditch covers
• Manhole body
• Other commercial buildings and service facilities

■Features of the Sealing Stand 1. Installation of fire protection equipment, wiring, and mounting of fire detectors can be done collectively after the ceiling work is completed. 2. Wiring in the ceiling and installation of fire detectors for new construction, renovations, and extensions can be easily done from inside the room. 3. Fire tests, confirmation of operation, and verification of installation positions for ceiling detectors can be conducted from inside the room. 4. Wiring and installation of fire protection equipment in the ceiling can be easily done from inside the room without exposed wiring, preserving the interior design of the building and ensuring a neat and tidy finish. 5. Shortened construction time (by half), reduced costs (by one-third), safe work conditions, and easier fire protection equipment installation. 6. Fire tests, confirmation of operation, and verification of installation positions can be conducted from inside the room, making maintenance work safe and easy.

• Inspection hatches, manhole covers, and ditch covers
• Interior construction
• Other commercial buildings and service facilities

■Features of the Sealing Unit (Installation) 1. Wiring in the ceiling space and the installation of wiring devices can be done from inside the room after the ceiling work is completed. 2. Various electrical works for building renovations and extensions can easily be performed from inside the room for ceiling wiring and the installation of wiring devices. 3. Ceiling wiring and the installation of wiring devices can be easily done from inside the room without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. Additionally, maintenance work becomes easier. 4. Construction time can be reduced by half (1/2) and construction costs can be lowered by a third (1/3), allowing for safe work and easier electrical construction. ■Features of the Sealing Unit (Product) 1. It is a round inspection opening (entry point) with wiring devices that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings). 5. The installation or replacement of wiring devices can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection checks and inspections can be performed without removing wiring devices, and the direction and arrangement can be freely changed (by removing the cover) (changing the direction of the cover).

• System ceiling
• Unit and other construction

■Features of the Joint Inspection Opening (Construction) 1. It can be easily installed from indoors onto the ceiling without any discomfort and with a good appearance. 2. It can be installed on the ceiling surface at the connection (joint) location of the wiring in the ceiling space from indoors. 3. The cover can be opened from indoors, allowing for easy inspection and connection work at the joint of the wiring in the ceiling space. 4. By periodically inspecting the connections of the ceiling wiring, which can be a cause of fire, by opening the cover from indoors, it is possible to prevent equipment damage and fires caused by overheating due to overload or poor connections. 5. The cover can be opened from indoors to perform connection replacement work for miswiring or poor connections of the ceiling wiring, without damaging the ceiling finishing materials. 6. It can be used not only for connecting general electrical wiring but also for connecting communication lines in low-voltage work. ■Features of the Joint Inspection Opening (Product) 1. It is a joint inspection opening that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Manhole body
• Other commercial buildings and service facilities

■Features of Ceiling Space Fire Alarm Bracket (Installation) 1. The installation of the fire alarm in the ceiling space can be easily done from indoors, allowing for early detection of ceiling space fires. 2. The cover can be opened from indoors, making it easy to test and inspect the fire alarm in the ceiling space. 3. A fire alarm can also be installed on the cover, enabling coordination between indoor and ceiling space fire alarms. 4. The installation of the ceiling space fire alarm bracket on the ceiling surface can be easily accomplished. 5. It can be installed neatly and unobtrusively without compromising the building's image. 6. Work such as equipment installation, fire testing, and inspections can be safely performed from indoors without entering the ceiling space. ■Features of Ceiling Space Fire Alarm Bracket (Product) 1. This is a ceiling space fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Manhole body
• Other commercial buildings and service facilities

■Features of the Ceiling Hole for Emergency Lights (Installation) 1. Wiring in the ceiling and installation of emergency lights can be done from indoors after the ceiling work is completed. 2. Wiring in the ceiling and installation of emergency lights for new construction, renovations, and extensions can be easily done from indoors. 3. Wiring in the ceiling and installation of emergency lights can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a good finish and appearance. 4. Construction time can be reduced (by half), construction costs can be lowered (by one-third), work can be done safely, and installation of emergency light equipment can be easily performed. Maintenance work can also be easily carried out. ■Features of the Ceiling Hole for Emergency Lights (Product) 1. It is a round inspection opening (entry point) with an emergency light that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. No repair work on ceiling finishing materials or ceiling framing materials is necessary, and specialized contractors are not required. 4. It can be installed on ceilings without framing materials (such as traditional Japanese room ceilings). 5. The installation or replacement of the emergency light can be easily done on the floor instead of the ceiling surface (by removing the cover). 6. Connection verification and inspection can be performed without removing wiring devices, and the direction can be freely changed (by removing the cover) (changing the direction of the cover).

• Inspection hatches, manhole covers, and ditch covers
• Interior construction
• Other commercial buildings and service facilities

■Features of Fire Sealing Holes (Construction) 1. Wiring in the ceiling space and installation of fire equipment can be done from inside after the ceiling work is completed. 2. Wiring and installation of fire equipment for new construction, renovations, and extensions can be easily done from inside. 3. Wiring and installation of fire equipment can be easily done from inside without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced (by half) and construction costs can be lowered (by one-third), allowing for safe work and easy fire equipment installation. 5. Connection verification and inspection can be easily done from inside, making maintenance tasks easier. ■Features of Fire Sealing Holes (Product) 1. It is a fire sealing hole (fire round entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even in ceilings without framing materials (such as traditional Japanese room ceilings). 5. Installation or replacement of fire equipment can be easily done on the floor rather than the ceiling (by removing the cover). 6. Connection verification and inspection can be performed without removing the fire equipment, and the direction can be freely changed.

• Inspection hatches, manhole covers, and ditch covers
• Piping and electrical wiring materials
• Interior construction

■Features of Security Ceiling Holes (Installation) 1. Wiring in the ceiling and installation of security devices can be done from indoors after the ceiling work is completed. 2. Installation of security equipment wiring and devices for new construction, renovations, and extensions can be easily done from indoors. 3. Wiring and installation of security devices can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced (by half) and costs lowered (by one-third), allowing for safe work and easy installation of security equipment. 5. Connection verification and inspection can be easily performed from indoors, making maintenance tasks simpler. ■Features of Security Ceiling Holes (Product) 1. A security ceiling hole (round entry point for security) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. No repair work for ceiling finishing materials or ceiling framing is required, and no specialized contractors are needed. 4. It can be installed even in ceilings without framing (such as traditional Japanese room ceilings). 5. Installation or replacement of security devices can be easily done on the floor rather than the ceiling (by removing the cover). 6. Connection verification and inspection can be performed without removing the security devices, and the direction can be freely changed.

• Inspection hatches, manhole covers, and ditch covers
• Interior construction
• Other commercial buildings and service facilities

■Features of Firefighting Sealing Holes (Construction) 1. Installation of access, piping, and heads in the ceiling space can be done from indoors after the ceiling work is completed. 2. It does not result in exposed wiring, preserving the interior design of the building, and can be finished neatly and attractively. 3. The construction period for sprinkler installation can be shortened (by half), and construction costs can be reduced (by one-third), allowing for safe work. 4. The direction of the heads attached to the cover can be freely changed or replaced. 6. Confirmation and inspection of connections in the ceiling space can be easily done from indoors, making maintenance tasks easier. 7. Installation of access, piping, and heads for sprinkler work in new construction, renovations, and extensions can be easily done from indoors. ■Features of Firefighting Sealing Holes (Product) 1. This is a firefighting sealing hole that can be installed in ceiling finishing materials. 2. It has an attractive appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials. 4. It can be installed in ceilings without substrate materials (such as traditional Japanese room ceilings).

• Disaster prevention fittings

■Features of Gas Leak Detector Bracket (Installation) 1. The gas leak detector can be installed in the ceiling space from inside the room, allowing for early detection of gas leaks in the ceiling. 2. The cover can be opened from inside the room, making it easy to test and inspect the gas leak detector in the ceiling space. 3. The installation of the gas leak detector bracket can be done neatly and easily without compromising the building's image or causing any discomfort. 4. The installation, fire testing, and inspection of the gas leak detector can be safely performed from inside the room without entering the ceiling space. ■Features of Gas Leak Detector Bracket (Product) 1. This is a gas leak detector bracket that can be installed on ceiling finishing materials. 2. It has an attractive appearance and allows for easy one-touch installation. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Gas equipment
• Other commercial buildings and service facilities

■Features of Cockroach Sealing Holes (Installation) 1. Cockroaches in the attic can be exterminated from inside the room. 2. It can be easily installed from inside the room to the ceiling, allowing for the opening of the lid and the placement of extermination supplies in the attic. 3. It can be installed easily and neatly without compromising the building's appearance. ■Features of Cockroach Sealing Holes (Product) 1. It is a ceiling-mounted fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• Inspection hatches, manhole covers, and ditch covers
• Manhole body
• Other commercial buildings and service facilities

■Features of Temperature Memory Sensor 1. It operates through a physical action that does not require power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with electric wires. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing the temperature and generating a signal. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory and is rust-free, maintaining its state permanently once activated. 10. This product meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 11. It is a non-resettable type that allows confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Facility Design

■Features of Temperature Memory Sensor (with terminals) 1. Capable of detecting abnormal temperatures inside various distribution boards, control panels, and operation panels (set temperature 80°C). 2. Capable of detecting abnormal temperatures inside industrial equipment and electrical devices. 3. Operates through physical action without the need for power supply or measuring instruments, directly sensing temperature and generating signals. 4. The operation allows for direct temperature detection through physical action, with a simple circuit configuration that can be produced at a low cost. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 6. Capable of routinely monitoring various abnormal temperatures, ensuring reliable and safe maintenance management. 7. A product that integrates shape memory alloy with a terminal attached to the wire (set temperature 80°C). 8. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 10. A product that meets the performance standards of fixed temperature type detectors (Type 1, 120 seconds) as specified by fire safety regulations. 11. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).

• Facility Design
• Power distribution and control panels

■Features of Temperature Sensing Wire 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for routine monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it can provide extensive monitoring of abnormal temperatures. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed-temperature type detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation (once sensing is activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate a signal through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the collective monitoring of various abnormal temperatures on a daily basis, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates a large number of shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reset. The activated location can be deleted and reconnected.)

• Facility Design

This product is a fire memory sensor with a set temperature of 80°C. It integrates a shape memory alloy attached in a coil shape to a wire. When the surrounding temperature reaches 80°C, the wire softens, and the shape memory alloy constricts the wire (restoring it), creating a short circuit between the two wires to generate a temperature sensing signal (80°C). It is designed to be installed in equipment or locations at risk of fire, alerting the surroundings through alarms and preventing fires in advance, while also providing daily monitoring of fires with an eco-friendly technology product that has zero standby power for its switching function. It is a non-resettable type that allows for confirmation of a fire after activation. This product meets the performance standards of a fixed temperature type detector (Type 1) as specified by fire safety regulations (120 seconds). Set temperature: 80°C. ■ Contact information regarding this matter: 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Facility Design

■Features of Fire Detection Wires 1. By extending the wiring, the fire detection circuit is completed, creating a wide area for fire alert. 2. Wiring in buildings under construction, ships being built, aircraft, and vehicles completes the fire detection circuit. 3. Wiring around the exterior of residential garages, storage sheds, and warehouses completes the fire detection circuit. 4. Wiring in the precincts of temples/shrines and in livestock buildings completes the fire detection circuit. 5. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring devices. 6. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 7. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 8. Utilizing the softening of the wire and the recovery of shape memory alloys, the two wires short-circuit to sense the temperature and send a signal. 9. It is an eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and once activated, it retains its state permanently, allowing for long-term use. 11. This product meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Facility Design
• Imported houses and log houses

■Features of Fire Detection Wire (with Fire Push Button) 1. By simply pulling out and wiring the fire detection wire (with fire push button), the fire detection circuit is completed, creating a fire alert area. The fire detection wire (with fire push button) can be rolled up and moved to the necessary location for wiring. 2. Anyone can wire the fire detection wire (with fire push button) by pulling it out. 3. The fire detection wire (with fire push button) can be wired in places at risk of fire or arson, such as buildings, industrial machinery, and the grounds or buildings of temples/shrines, allowing for fire alert areas ranging from small to large. 4. The fire detection wire (with fire push button) can be wired in outdoor and indoor large facilities, such as forests near residences, parks, public facilities, and event venues, enabling response to extensive fire alert areas. 【Notes】: Features of Fire Detection Wire 1. It is an eco-friendly technology product with zero standby power due to its switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. The operation is a physical action that does not require power, ensuring no malfunctions and allowing for swift and precise use over many years. 4. Direct temperature sensing (temperature detection) can be done without measurement instruments. 5. The fire detection wire can be used for indoor/outdoor wiring. 6. It is a non-reset type that allows for confirmation after activation.

• Facility Design
• Other commercial buildings and service facilities

■Features of Portable Fire Alarm 1. Can be easily installed in areas of the home at risk of fire or arson. 2. By installing it closer to the potential fire outbreak location, it can detect abnormal temperatures associated with fire at an early stage. 3. This product combines a temperature memory sensor with a security alarm. The set temperature is 80°C. 4. It is an eco-friendly product with zero standby power, equipped with both emergency alarms and abnormal temperature alarms. 5. Extremely compact and lightweight for convenient portability. Additionally, it is very easy to handle. 6. Can be freely moved and installed in various locations. 【Reference Note】: Attach commercially available magnetic stickers to the back of the portable fire alarm for very convenient installation. ■Features of Abnormal Memory Sensor 1. The abnormal memory sensor utilizes eco-technology with zero standby power through a switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its state once activated. 3. Operation is a physical action that requires no power supply, ensuring no false activation and allowing for precise and swift use over many years. 4. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted or replaced.) 5. This product meets the performance standards of type 1 fixed-temperature detectors (120 seconds) as specified by fire safety regulations.

• Display (display shelves, display boards, mannequins, etc.)
• Other commercial buildings and service facilities
• Sports related facilities

■Features of the Buddhist Altar Alarm 1. Can be installed on a Buddhist altar or a kamidana to monitor abnormal temperatures. 2. Easy to install (hang or place) on a Buddhist altar or kamidana. 3. A product that combines a security alarm with a temperature memory sensor. The set temperature is 80°C. 4. An eco-friendly product with zero standby power that combines emergency alarms and abnormal temperature alarms. 5. Extremely compact and lightweight for convenient installation. Additionally, it is very easy to handle. 6. In the event of a fire, the case material of the Buddhist altar alarm will deform (melt) and emit an alarm sound for about one minute. 7. A product that meets the performance standards of a fixed temperature detector type 1 (120 seconds) as specified by fire safety regulations. ■Features of the Temperature Memory Sensor 1. The temperature memory sensor utilizes eco-technology with zero standby power through a switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. Operation is a physical action that does not require power, ensuring no false activations and allowing for swift and precise use over many years. 4. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated part must be deleted and reconnected.)

• Other commercial buildings and service facilities
• Sports related facilities

■Features of the Buddhist Altar Alarm 1. This product utilizes eco-friendly technology with zero standby power by connecting a wired temperature memory sensor to the alarm circuit. It detects temperatures at 80°C. 2. It is a product that combines a wired temperature memory sensor with a security alarm. 3. It can detect abnormal temperatures from the Buddhist altar early, preventing fires before they occur. 4. It can be easily installed (hung or placed) on Buddhist altars and Shinto shrines. 5. It is extremely compact and lightweight, making installation convenient. Additionally, it is very easy to handle. 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of the Temperature Memory Sensor 1. The temperature memory sensor is a product that utilizes soluble insulated wire (softening) and shape memory alloy (restoration). 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. It operates physically without the need for a power supply, ensuring no false activations and allowing for swift, accurate use over many years. 4. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated area can be deleted and reconnected.)

• Other commercial buildings and service facilities
• Sports related facilities

[PR Text] ■Features of Travel Portable Alarm 1. Possessing a travel portable alarm allows for safe and secure travel. 2. It can be used for security alarms at travel destinations, emergency alarms for health issues, and abnormal temperature alarms for fires at accommodations. 3. It enables security measures for travel. 4. This product combines a security alarm with a temperature memory sensor, set at a temperature of 80°C. 5. It is an eco-friendly product with zero standby power that integrates security alarms, emergency alarms, and abnormal temperature alarms. 6. Extremely compact and lightweight, making it convenient to carry. Additionally, it is very easy to handle. 7. It can be freely carried/installed (hung, placed, or carried) and used according to various applications. 8. It meets the performance standards of fixed temperature type detectors as defined by fire safety regulations (120 seconds). ■Features of Temperature Memory Sensor 1. The temperature memory sensor employs eco-technology with zero standby power through a switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. The operation is a physical action that does not require power, ensuring no false activations and allowing for precise and swift use over many years. 4. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activation point must be deleted and reconnected).

• Other commercial buildings and service facilities
• Sports related facilities

■Features of the Portable Care Alarm Device 1. It can be attached to the body, bed, or chair, providing a convenient call alarm for caregiving, ensuring safety and peace of mind. 2. It can issue alarms for calls indoors, health issues, and emergencies such as abnormal temperatures associated with fires. 3. It can issue alarms for calls, security, self-defense, and emergencies during rehabilitation or walking. 4. This product combines a fire memory sensor with a call button for security alarms, set at a temperature of 80°C. 5. It is a compact, portable eco-product with zero standby power that incorporates security, emergency, fire, and call functions. 6. It is extremely compact and lightweight, making it convenient to carry, and very easy to operate. 7. It can be freely carried or installed (hung, placed, or carried), allowing for use according to various needs. 8. It is a product that meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations, with a detection temperature of 80°C. ■Features of the Fire Memory Sensor 1. The fire memory sensor employs switching technology for zero standby power, making it eco-friendly. 2. The shape memory alloy has permanent memory and is rust-free, maintaining its state once activated. 3. Activation is a physical action that requires no power supply, ensuring no false activations and allowing for swift, precise use over many years.

• Other commercial buildings and service facilities
• Sports related facilities

■Features of Fire Detection Wire Alarm 1. It can provide abnormal temperature alarms associated with fires in multiple locations using fire detection wire. 2. It can provide abnormal temperature alarms associated with fires in multiple locations such as "between the ceiling and the room" or "between the floor and the room." 3. The fire detection wire can be inserted into gaps between walls, furniture, and electrical appliances to provide abnormal temperature alarms associated with fires. 4. This eco-friendly product can provide abnormal temperature alarms associated with fires with zero standby power using fire detection wire. 5. It is easy to install and move, allowing anyone to set it up. 6. It is a product that integrates multiple shape memory alloys at equal intervals along an extended wire. 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. It can directly sense temperature and signal through physical operation without the need for power supply or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. It can be wired similarly to electrical equipment wiring. 12. It is a product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be deleted and reconnected).

• Sports related facilities

■Features of Residential Arson Detectors 1. Can detect residential arson at an early stage. 2. Easily installed outdoors, in garages, storage sheds, or waste disposal areas of buildings prone to arson. 3. By extending the arson detection wire, a wide area of arson alert can be created. 4. An eco-friendly product that can detect and alert for fires caused by residential arson with zero standby power. 5. Can continuously monitor for fires caused by residential arson. Reliable, safe, and secure. 6. A product that integrates numerous shape memory alloys at equal intervals along the extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires, sensing temperature and generating a signal. 8. The shape memory alloy has permanent memory, is rust-free, and can maintain its function indefinitely after activation, allowing for long-term use. 9. Direct temperature sensing and signaling through physical operation without the need for power supply or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit, sensing temperature and generating a signal. 11. Can be wired similarly to electrical equipment wires, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Other security systems
• Imported houses and log houses

■Features of Plug-Type Fire Alarm 1. Early detection of abnormal temperatures associated with residential fires using a plug sensor (set temperature 80°C). 2. Detection and alarm of abnormal temperatures associated with fires can be done closer to the fire's origin. 3. Early detection of abnormal temperatures associated with fires can help prevent fires before they occur. 4. Can be used and installed under similar environmental conditions as residential outlets (design, construction). 5. Installation or replacement of the plug sensor can be easily done by simply plugging it into the jack with one touch. 6. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (Type 1, 120 seconds). ■Features of Temperature Memory Sensor 1. Combines shape memory alloy with electric wire to create an integrated system that detects temperature by short-circuiting (contact) between the two wire cores when the electric wire softens and the shape memory alloy restores. Set temperature is 80°C. 2. Simple, easy, and accurate with zero standby power consumption due to its switching function, making it an eco-friendly technology. 3. The shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 4. Operation is based on a physical mechanism that requires no power supply, ensuring no malfunctions and allowing for swift, accurate use over many years.

• Other security systems
• Architectural design office

■Features of Plug-Type Fire Alarms for Care Facilities 1. Early detection of abnormal temperatures associated with fires in care rooms can be achieved using plug sensors or plug sensing wires (set temperature 80°C). 2. Detection and alarm for abnormal temperatures associated with fires can be done closer to the fire's origin. 3. Abnormal temperatures associated with fires can be detected early, preventing fires before they occur. 4. Alarms for abnormal temperatures associated with fires and emergency situations can be triggered. 5. Installation and construction (design and installation) can be done under conditions similar to those of residential outlets. 6. Installation or replacement of plug sensors and plug sensing wires can be easily done by plugging into a jack with a single touch. 7. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of Temperature Memory Sensors 1. A shape memory alloy is integrated with a wire, utilizing the softening of the wire and the restoration of the shape memory alloy to create a short circuit (contact) between the two wire cores, thereby sensing temperature and generating a signal. The set temperature is 80°C. 2. It is simple, easy to use, and highly accurate, employing eco-friendly technology with zero standby power through its switching function. 3. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).

• Other security systems
• Architectural design office

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas where there is a risk of dangerous temperatures, allowing for monitoring, alarming, and remote reporting. 3. Continuously monitors various dangerous temperatures in different industries on a daily basis, enabling early detection and safe response. 4. An eco-friendly "Dangerous Temperature Alarm Device" that anyone can easily install with zero standby power. 5. A new type of "Dangerous Temperature Alarm Device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and maintains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated; the activated location must be deleted and reconnected.)

• Alarm panel
• Substation equipment
• Power distribution and control panels

■Features of the Battery Alarm System 1. A temperature sensing wire (70°C) is installed on the outer wall of the battery or the power line, allowing for monitoring and alarming of abnormal temperatures. 2. The abnormal temperature of the battery is continuously monitored on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of battery equipment can be carried out reliably and safely. 4. This is the ideal "Battery Alarm System" for safety measures against abnormal temperatures in batteries. 5. It is a "Battery Alarm System" that combines a compact alarm panel with a temperature sensing wire (70°C). 6. This product meets the performance standards of a fixed temperature type detector (Type 1, 120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (70°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wires and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, has good accuracy, and employs eco-technology with zero standby power through its switching function. 6. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

■Features of the Abnormal Temperature Alarm for Batteries 1. Capable of detecting and alarming for abnormal temperatures in each battery. 2. An eco-technology that can detect and alarm for abnormal temperatures in each battery with zero standby power. 3. Allows for regular centralized monitoring of abnormal heat (abnormal temperatures) in each battery. 4. Battery equipment inspection tasks can be performed by anyone, ensuring reliable and safe maintenance management. 5. Detects abnormal temperatures in each battery and alerts through an alarm to prevent equipment damage and fires. 6. A product that integrates numerous shape memory alloys at equal intervals along an extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. Can be wired similarly to electrical equipment wiring, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Power generation equipment
• Substation equipment
• Power distribution and control panels

■Features of Temperature Detection Sensors for Storage Batteries 1. It can continuously monitor and detect abnormal heat generation (abnormal temperature) of storage batteries. 2. It can continuously monitor and detect abnormal temperatures of wires and electrical equipment in the charging/discharging circuit of storage battery systems. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloy (restoration) and wire (softening) to create a short circuit (contact) between two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature: 70°C] 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and generate signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operation is based on physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once detected, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels

■Features of the Distribution Board Alarm System 1. The system is equipped with temperature sensing wires (80°C) wired into the distribution/control panel, allowing for monitoring and alarm of abnormal temperatures. 2. It continuously monitors the abnormal temperatures of the distribution/control panel equipment, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be conducted reliably and safely. 4. This is the optimal "Distribution Board Alarm System" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "Distribution Board Alarm System" that combines a compact alarm panel with temperature sensing wires (80°C). 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical action without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical wires. It can be used for both indoor and outdoor wiring. 4. The product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, and highly accurate, utilizing eco-friendly technology with zero standby power through its switching function.

• Power generation equipment
• Power distribution and control panels

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between two wires, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates without the need for power, ensuring no malfunction and allowing for swift, precise use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Power generation equipment
• Substation equipment
• Power distribution and control panels