スペースワークス List of Products and Services

■Features of Temperature Sensing Wires for Electric Cables 1. Attach temperature sensing wires for electric cables to the cables using spiral tubes or similar methods to monitor abnormal temperatures in the cables. 2. Attach temperature sensing wires for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in the electric equipment's cables, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Allows for safety management of electric equipment even by individuals who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Enables direct temperature sensing and signaling through physical operation without the need for power sources or measuring devices. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 3. Can be wired similarly to electric cables. Additionally, it can be used for both indoor and outdoor wiring.

• Power generation equipment
• Substation equipment
• Power distribution and control panels

■Features of the Abnormal Temperature Monitoring Panel 1. Enables safe unmanned operation of industrial machinery and equipment in factories. 2. Detects abnormal temperatures in industrial equipment, cuts off the power circuit, and prevents damage to equipment and fires in advance. 3. Allows for continuous daily monitoring of abnormal temperatures in factory industrial equipment, ensuring reliable and safe maintenance management. 4. Can cut off the power circuit at abnormal temperatures regardless of the main power capacity (load capacity). 5. An eco-friendly abnormal temperature monitoring panel with zero standby power. The electrical circuit configuration is simple and can be produced at a low cost. 6. Can be installed in factory industrial machinery and equipment, serving as safety management equipment during ISO updates. ■Features of the Temperature Detection Sensor 1. Combines and integrates shape memory alloy with electric wires, using the softening of the wire and the restoration of the shape memory alloy to detect temperature by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is the maximum allowable temperature of the wire. (60℃・75℃) 2. Simple, easy, and accurate, with a switching function that utilizes eco-friendly technology with zero standby power. 3. The shape memory alloy has permanent memory and is rust-free, maintaining its state once activated. 4. Operates without the need for power through physical action, ensuring no malfunction and allowing for swift, precise use over many years. 5. Non-resettable, allowing for confirmation after activation.

• Other security systems
• Architectural design office

■Features of the Abnormal Temperature Control Device 1. It can detect abnormal temperatures in industrial machinery, cut off the power circuit, and prevent equipment damage and fires before they occur. 2. It allows for continuous monitoring of abnormal temperatures in industrial machinery, ensuring reliable and safe maintenance management. 3. The power circuit can be cut off due to abnormal temperatures regardless of the main power capacity. 4. It enables safe unmanned operation of industrial machinery in factories. 5. It can be installed in industrial machinery in factories as a safety management device during ISO updates. 6. It is an eco-friendly abnormal temperature control device with zero standby power. ■Features of the Temperature Sensing Wire 1. It utilizes extended wires (softening) and numerous shape memory alloys (restoration) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures and generating a signal. The set temperature is 80°C. 2. It is a simple, easy-to-use product with good accuracy, featuring a switching function that allows for zero standby power. 3. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 4. The operation is a physical action that requires no power, ensuring no malfunctions and allowing for swift, accurate use over many years. 5. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated area must be deleted and reconnected). 6. It is a product that meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations.

• Other security systems
• Architectural design office

■Features of the Abnormal Temperature Alarm 1. Can be installed on household appliances and industrial equipment in factories to provide an abnormal temperature (80°C) alarm. 2. Enables early detection of abnormal temperatures, preventing equipment damage and fires. 3. Allows for regular monitoring of abnormal temperatures, ensuring reliable and safe maintenance management. 4. Can be easily installed on household appliances, industrial equipment, and appliances that may be subject to recall. 5. The abnormal temperature alarm is an eco-friendly product with zero standby power due to its switching function. 6. The temperature memory sensor directly senses temperature and generates signals through physical operation without the need for power or measuring instruments. 7. The temperature memory sensor is a product that integrates shape memory alloy into a coil shape with electrical wires. 8. The temperature memory sensor detects temperature by short-circuiting the two wires (softening) and shape memory alloy (restoration) to generate signals. 9. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 10. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Other commercial buildings and service facilities
• Sports related facilities

■Features of Industrial Abnormal Temperature Alarm System 1. It can detect abnormal temperatures in industrial equipment early, preventing damage and fires. 2. It allows for daily centralized monitoring of abnormal temperatures in various industrial machines. 3. By installing it on each industrial device, maintenance management of the entire factory can be carried out reliably and safely. 4. It is an eco-technology that can detect and alarm abnormal temperatures in various industrial machines with zero standby power. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and send a signal. 6. It can directly sense temperature and send signals through physical operation without the need for power supply or measuring instruments. 7. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 8. It is a product that integrates numerous shape memory alloys at equal intervals of 0.5m along the wire. 9. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing temperature and sending a signal. 10. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 11. It is a product that meets the performance standards of fixed-temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Other security systems

■Features of the Reel-Type Fire Alarm System 1. It is a portable fire alarm (reel-type fire alarm) that can be easily installed and moved by anyone. 2. By pulling out the fire detection line from the reel and wiring it, a fire alert area is created, completing the installation. The fire detection line can be rewound onto the reel, and the main body of the reel can be moved to the desired location for installation. 3. It can be installed in any location without restrictions, and both the equipment and installation costs are extremely low. 4. An automatic fire alarm system that corresponds to the progress of construction in buildings under construction can be easily established. 5. It can be easily installed by anyone, not just specialized technicians. 【Notes】: Features of the Fire Detection Line 1. It is an eco-friendly technology product with zero standby power due to its switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. The operation requires no power supply, is based on physical movement, and can be used for many years with no false activations, providing quick and precise responses. 4. Temperature sensing (temperature detection) can be done directly without the need for measuring instruments. 5. The fire detection line can be used for both indoor and outdoor wiring. 6. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated section must be removed and reconnected.)

• Disaster prevention fittings
• Safety and consumables

■Features of Handheld Fire Alarms 1. Can be installed in accordance with the progress of construction on buildings or ships under construction. 2. Wiring can be done closer to areas at risk of fire or arson in homes, apartments, buildings, and factories, making installation and relocation easy. 3. Wiring can be done closer to areas at risk of fire or arson in livestock barns, making installation and relocation easy. 4. By extending fire detection lines outdoors and indoors, the fire detection circuit is completed, creating a fire alert area. 5. Can be easily installed in areas at risk of fire or arson. Designed for private use as a fire alarm. 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of Temperature Sensing Lines 1. Simple, easy, and accurate, this eco-friendly product features zero standby power with a switching function. 2. Shape memory alloys have permanent memory, are rust-free, and maintain their state once activated. 3. Operation is based on physical action without the need for power, ensuring no malfunctions and allowing for swift, precise use over many years. 4. Non-resettable, allowing for confirmation after activation.

• Other security systems
• Architectural design office

■Features of the Safety Alarm 1. It can issue emergency alarms during accidents or health issues, as well as fire alarms after the use of open flames. 2. This product combines a security alarm with a fire memory sensor, set at a temperature of 80°C. 3. It is a compact, portable, eco-friendly product with zero standby power that integrates both emergency and fire alarms. 4. Extremely compact and lightweight, making it convenient to carry, and very easy to operate. 5. It can be freely carried and installed (hung, placed, or carried), allowing for versatile usage according to needs. 6. It can be easily installed in areas at construction sites where there is a risk of fire. 7. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of the Fire Memory Sensor 1. The fire memory sensor employs switching technology for zero standby power, making it eco-friendly. 2. The shape memory alloy has permanent memory and is rust-free, maintaining its state once activated. 3. The operation requires no power supply and is based on physical action, ensuring no false activations and allowing for precise and reliable use over many years. 4. It is a non-resettable type, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated area must be deleted and reconnected).

• Safety Supplies
• Disaster prevention supplies
• Safety and consumables

【Main Features】 1. Easy operation allows for the measurement of EO gas concentration and EO residue concentration within the EO sterilizer. 2. Measurement of EO concentration can be performed in both continuous automatic (monitoring mode) and manual (measurement instruction mode) settings. 3. By measuring EO concentration, safe and efficient (cost-effective) sterilization operations can be conducted. 4. Real-time monitoring and evaluation of EOG sterilization, measurement of residual EO concentration and safety evaluation, and record management via external output are possible. 5. This is an EO gas analysis device specialized for measuring EO concentration. 【Main Effects】 1. Compliance with the Ministry of Health, Labour and Welfare's requirement for recording ethylene oxide (EO) sterilization conditions. 2. Ability to respond to inspections by the US FDA (Food and Drug Administration) regarding export approvals for medical devices intended for the US market. 3. Compliance with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. 4. Ability to provide detailed reports to clients such as sterilization contractors. For inquiries regarding this matter: 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp

• Cooking facility equipment and supplies
• Ski related facilities

【Main Features】 1. Measurement of EO gas concentration and residual EO concentration in the EO sterilizer with simple operation. 2. Measurement of EO concentration in accordance with the sterilization process (measurement analysis). 3. Recording of EO concentration in accordance with the sterilization process, with date, time, and concentration printed by the recorder or printer. 4. Measurement of EO concentration can be performed in continuous automatic (monitoring mode) and manual (measurement instruction mode) modes. 5. Safe and efficient (cost-effective) sterilization operations can be conducted. 6. Objective monitoring and evaluation of EOG sterilization / measurement of residual EO concentration and safety evaluation / record management. 【Main Effects】 1. Compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. 2. Compliance with U.S. FDA (Food and Drug Administration) inspections related to export approval for medical devices intended for the U.S. market. 3. Compliance with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. 4. Compliance with reporting details for clients such as contract sterilization service providers. ■ Contact Information for Inquiries 2-2-8 Minami Tsutsuji-ga-oka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Cooking facility equipment and supplies
• Ski related facilities

【Main Features】 1. Easy operation for measuring EO gas concentration and EO residual concentration inside the EO sterilizer. 2. Measurement of EO concentration in accordance with the sterilization process (measurement analysis). 3. Recording of EO concentration in accordance with the sterilization process, with date, time, and concentration printed by the recorder or printer. 4. Measurement of EO concentration [continuous automatic (monitoring mode) and manual (measurement instruction mode)]. 5. Safe and efficient (running cost) sterilization work by measuring EO concentration. 6. Objective monitoring and evaluation of EOG sterilization / measurement of residual EO concentration and safety evaluation / record management. 【Main Effects】 1. Compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. 2. Compliance with US FDA (Food and Drug Administration) inspections related to export approval for medical devices to the United States. 3. Compliance with ISO obligations for measuring residual EO concentration and recording ethylene oxide (EO) sterilization conditions. 4. Compliance with reporting details for clients such as sterilization contractors. ■ Contact Information for This Matter 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Cooking facility equipment and supplies
• Ski related facilities

1. Continuous automatic measurement of the EO concentration in multiple EOG sterilizers can be performed, allowing for recording and measurement of EO residual concentration. 2. It can accommodate six EOG sterilizers, allowing for the selection of any number of units and prioritization as desired. 3. Objective monitoring and evaluation of EOG sterilization, rapid measurement and safety evaluation of residual EO concentration, as well as management of these records can be performed. 4. Management of sterilization and safety can be easily conducted, enabling safe and efficient (cost-effective) sterilization operations. 【Main Effects】 (A) Compliance with the Ministry of Health, Labour and Welfare's obligation to record ethylene oxide (EO) sterilization conditions. (B) Compliance with inspections by the U.S. FDA (Food and Drug Administration) regarding export approvals for medical devices intended for the U.S. market. (C) Compliance with ISO requirements for measuring residual EO concentration and recording obligations for ethylene oxide (EO) sterilization conditions. (D) Compliance with reporting details to clients such as contract sterilization service providers. (E) Easy compliance with the above items (A) to (D). ■ Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Cooking facility equipment and supplies
• Ski related facilities