ユニオンシステム List of Products and Services

This is an introduction to a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story kindergarten made of steel. The project is a single-story kindergarten with a steel frame, featuring a building with a floor plan measuring 53m x 30m. It is located in the suburbs, where a relatively large site was available, allowing for a single-story layout. To apply for a single-story structure, we conducted manual calculations to verify the establishment of the rigid floor assumption for the roof section and the "stress transfer" in the frame sections. Additionally, we held preliminary meetings to discuss the feasibility of obtaining building confirmation for a single-story structure. Although the roof surface is unique, further examination allowed us to demonstrate cohesive behavior. 【Practical Overview】 ■ Use: Kindergarten ■ Structural Type: Steel Frame ■ Number of Stories: 1 ■ Design: Nanto Architectural Planning (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a two-story steel bank branch. The two-story steel structure has a maximum height of 9.5 meters, with a floor plan shaped like the letter L, and the elevation is designed to have a large roof that slopes from the R floor to the second floor in the long side direction. Additionally, the slope shape of the large roof was modeled using node vertical movement and node unification to account for beams spanning layers. 【Practical Overview】 ■ Purpose: Bank branch ■ Structural Type: Steel ■ Number of Floors: 2 ■ Design: Structural FACTORY Co., Ltd. (Fukuoka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a one-story columbarium constructed with S, RC, and SRC structures. The floor plan is regular, and the roof shape is designed to be a deformed rectangle with an eccentric top. Additionally, the outer walls of the columbarium are made of RC walls (partly serving as retaining walls due to the sloped site), and the steel columns to which the RC walls are attached are designed as encased columns (SRC columns). 【Case Overview】 ■ Purpose: Columbarium ■ Structural Type: S + RC + SRC ■ Levels: 1 floor ■ Design: Structural FACTORY Co., Ltd. (Fukuoka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the structural calculation software 'Super Build/SS7' applied to a single-story nursery made of steel (S construction). The design features a hyperbolic plane with symmetrically arranged arcs, connected by a roof with a height of 3.0 meters between the hyperbolas. Additionally, the metal sheet roof is treated as a flexible floor under the assumption that the rigid floor assumption does not hold, and the rigidity of the roof surface is evaluated as horizontal braces. 【Example Overview】 ■ Purpose: Nursery ■ Structural Type: Steel (S construction) ■ Number of Stories: 1 ■ Design: Structural FACTORY Co., Ltd. (Fukuoka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a two-story steel structure nursery with a penthouse. This project is a two-story nursery (approximately 26.5×17.15m) with a trapezoidal floor plan that fits the site. A notable feature is the large atrium in the central part, designed to bring in natural light to the first-floor hall area. 【Case Overview】 ■ Use: Nursery ■ Structural Type: Steel Structure ■ Levels: 2 stories above ground, 1 penthouse ■ Design: Case Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a three-story steel structure plant building. The first floor serves as an outdoor equipment storage area enclosed by a fence, while the second and third floors feature a deck slab with a free access floor, covered by a folded plate roof and walls. The columns are made of square steel pipes, and a two-way frame structure with a 2×2 span is adopted. The rigidity of the deck slab ensures that the second and third floors are rigid floors. 【Example Overview】 ■ Purpose: Plant building ■ Structural Type: Steel structure ■ Number of Floors: 3 ■ Design: Sunyu Building Engineering Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the structural calculation software 'Super Build/SS7' applied to a 5-story rental apartment building made of reinforced concrete (RC). The building has a rectangular floor plan and is situated on the east and south sides adjacent to roads (the south side is a two-way road), with setbacks on both sides. Both directions employ a frame structure, with slits in the walls within the frame, and the corridors are supported by cantilever beams, extending out from the main framework. 【Case Overview】 ■ Purpose: Rental Apartment ■ Structural Type: Reinforced Concrete (RC) ■ Number of Floors: 5 ■ Design: Kyuritsu Design Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the structural calculation software 'Super Build/SS7' for a steel-framed automobile dealership. This project is a two-story automobile dealership with a building footprint of 39.8m x 10m, featuring a canopy measuring 17.3m x 15m. While the structure is a simple form of pure steel frame with a straightforward footprint, it has unique characteristics typical of automobile dealerships, such as the differing heights at which the canopy and eaves attach compared to the showroom roof. [Case Study Overview] ■ Purpose: Automobile dealership ■ Structural Type: Steel frame ■ Number of Stories: 2 ■ Design: Nippon Kensetsu Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

This is an introduction to a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story maintenance factory made of steel (S construction). The columns are square steel pipes, the beams are H-shaped steel, with 2/3 of the roof being a parking lot (RC slab) and 1/3 being a folded plate roof, and the basic grid is 6.5m x 8.5m. The structural form became a pure frame structure as it was not possible to place effective vertical braces in the design. 【Case Overview】 ■ Purpose: Maintenance Factory ■ Structural Type: Steel Construction (S construction) ■ Number of Floors: 1 ■ Design: Nippon Kensetsu Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

This is an introduction to the practical example of the structural calculation software 'Super Build/SS7' used for a two-story steel-framed pediatric clinic. The building is a newly constructed two-story clinic, with a request to aesthetically emphasize the braces, making the proper arrangement of braces essential in the structural planning. The entrance is located at the southeast corner of the building, and from there, the second floor features an L-shaped atrium, creating a sense of openness. 【Example Overview】 ■ Purpose: Pediatric clinic ■ Structural Type: Steel-framed ■ Number of Floors: 2 ■ Design: Mov Structural Design Co., Ltd. (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 5-story steel factory building. This property features two three-dimensional warehouses inside, with the fourth floor having a very high ceiling of 8.5 meters, and a specification that includes equipment platforms in the middle of the floor. Additionally, the areas where equipment is placed and the three-dimensional warehouse section create a void space, resulting in many locations where the rigid floor assumption does not hold. 【Case Study Overview】 ■ Purpose: Factory ■ Structural Type: Steel ■ Number of Floors: 5 ■ Design: Nakano Fudo Construction Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a four-story educational and cultural facility constructed with a combination of steel (S) and steel-reinforced concrete (SRC). This building primarily serves as a library, with the first and second floors facing an existing building to the south, while the third and fourth floors face a river flowing to the north of the site. The entire building is designed as a strength-type structure that ensures the required amount of walls (braces) and columns to satisfy Structural Calculation Route 1 in both directions on all floors. 【Case Study Overview】 ■ Purpose: Educational and cultural facility ■ Structural Type: S + SRC ■ Number of Floors: 4 ■ Design: Mikami Architectural Office Co., Ltd. (Ibaraki Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' used for a 19-story office building constructed with RC and SRC structures. Initially, a pentagonal office building was planned on a small site to maximize the sky ratio using PCa and PC. Due to the scale, performance evaluation was necessary, and ultimately, we aimed for time history response analysis. From the perspective of data linkage, we consistently utilized tools related to the foundation, from the creation of the announcement wave to response analysis. 【Example Overview】 ■ Use: Office Building ■ Structural Type: RC + SRC (PCa + PC) ■ Stories: 19 ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 12-story above-ground and 1-story below-ground office building made of reinforced concrete (RC). The design utilizes the irregular shape of the site, maintaining a 500mm setback, which directly translates into the building's floor plan. Structurally, it features two volumes that rise and connect in between, creating a cohesive structural plan. Additionally, columns are placed in the center of spans where there are no existing piles, and these columns are connected by cantilever beams, forming a three-dimensional framework with orthogonal columns and a moment-resisting frame. [Case Study Overview] ■ Use: Office Building ■ Structural Type: RC (PRC) ■ Levels: 12 above ground, 1 below ground ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the consistent structural calculation software 'Super Build/SS7' used for a two-story certified children's facility made of steel. This project involves a two-story steel structure with a gable roof, where the key design points are how to handle wind pressure on the large beams spanning both sides of the atrium and how to address buckling. For the wind pressure and buckling restraint of the large beams on the atrium sides, a triangular frame (three layers) was incorporated under the roof, utilizing node unification between the three-layer and two-layer frames to create a structure that serves both wind pressure and buckling restraint. 【Example Overview】 ■ Purpose: Certified Children's Facility ■ Structural Type: Steel ■ Number of Stories: 2 ■ Design: Yoshio Design Co., Ltd. (Kanagawa Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a waste treatment facility constructed with S, RC, and SRC structures. This project is a 4-story waste treatment facility made of RC, S, and SRC, with a chimney rising from the roof, planned to reach GL +49.0m at the top of the chimney. Additionally, since there is an atrium within the main rigid floor, we planned to create a rigid floor by incorporating RC slabs and horizontal braces in the horizontal plane. 【Case Overview】 ■ Purpose: Certain waste treatment facility ■ Structural Type: S + RC + SRC ■ Levels: 7 stories above ground, 1 basement, 7th floor penthouse ■ Design: Yamada Architectural Structural Office Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a two-story steel structure factory. This building is a two-story steel factory being constructed in Aichi Prefecture, with a rectangular floor plan measuring 100m in the X direction and 80m in the Y direction. As it will serve as a manufacturing facility for production equipment, the second-floor slab is designed to accommodate heavy equipment installation and forklift traffic, with a standing seam roof and a reinforced concrete floor slab on the second floor. 【Case Overview】 ■ Purpose: Factory ■ Structural Type: Steel Structure ■ Number of Stories: 2 ■ Design: Morimoto Structural Design Office, Inc. (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a 5-story steel-framed office building. This building is planned for a company headquarters located near the Okazaki Interchange in Okazaki City, Aichi Prefecture. The building faces a main road and features a gate-type frame over 15 meters high that covers the entire office area, along with an object that penetrates all floors, creating a symbolic facade that catches the eye when passing by. 【Case Study Overview】 ■ Use: Office ■ Structural Type: Steel Frame ■ Number of Floors: 5 ■ Design: Morimoto Structural Design Office, Inc. (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' used for a 10-story above-ground and 1-story underground office building made of steel. Due to the constraints of the site shape, the floor plan was designed with a main structure that bears seismic forces measuring 6.5m x 10.7m, with a staircase and other structures that do not bear seismic forces measuring 2.7m x 5.5m attached to it. Additionally, since the underground first floor was created within a pit, it was not included in the modeling as a floor; instead, it was treated as a foundation beam with an upper added layer, and piping and other installations were placed in the added layer. 【Example Overview】 ■ Use: Office Building ■ Structural Type: Steel ■ Levels: 10 stories above ground, 1 story underground ■ Design: Structural Form Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for university facilities constructed with a combination of steel (S) and reinforced concrete (RC). This building is a three-story above ground (S) plus one basement (RC) university facility that takes advantage of the sloped and stepped construction site. Due to the slope and steps of the construction site, part of the structure is underground, and the underground portion is planned as a reinforced concrete structure with seismic walls in a frame structure. 【Example Overview】 ■ Use: University Facility ■ Structural Type: S + RC ■ Levels: 3 stories above ground, 1 basement (4 stories above ground structurally) ■ Design: Sanjugo Architectural Institute Co., Ltd. (Toyama Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for steel-framed commercial facilities. This building is a two-story commercial facility with a steel frame, covering approximately 4,500 m², with the sales area being a single-story structure. The transportation area is partially two stories. Both directions are designed with a rigid frame structure, using Route 3 for the design, and the foundation employs the TNF construction method. 【Case Study Overview】 ■ Purpose: Commercial facility ■ Structural Type: Steel frame ■ Number of Stories: 2 ■ Design: Sigma Koken Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a three-story commercial facility constructed with steel (S) and partially cross-laminated timber (CLT). This building primarily serves as a commercial facility for the exhibition and sale of automobiles, with an attached automotive maintenance workshop in the back. The facade features slender post columns, and the main seismic elements are designed as a frame structure using 500mm square steel pipe columns set back from the facade, ensuring that thick members do not appear on the outer perimeter. 【Case Study Overview】 ■ Use: Commercial facility ■ Structural Type: Steel (S) + Partially Cross-Laminated Timber (CLT) ■ Stories: 3 ■ Design: Hiraiwa Structural Planning LLC (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the consistent structural calculation software 'Super Build/SS7' for CFT-constructed apartment buildings. This project is a 29-story, 110-meter tall CFT apartment building, designed as a hybrid damping structure with viscous damping walls (VDW) and damping columns as damping members. The structural form is a pure frame structure, with viscous damping walls placed in the common areas of the standard floor and steel damping columns located within some of the unit boundary walls, designed to absorb energy from wind and earthquakes, thereby improving livability and seismic resistance. 【Example Overview】 ■ Use: Apartment building ■ Structural Type: CFT ■ Stories: 29 ■ Design: Kamikawachi Design Co., Ltd. (Saitama Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for steel frame plant buildings. This building is a two-story steel structure factory measuring 74m × 73m with a height of 13m, featuring an automated warehouse inside. As it is intended for factory use, the structure has a large open space from the bottom. The columns are square steel pipes, and the beams are H-shaped steel. The basic grid is between 6.0m and 7.5m, and due to the high floor height of approximately 7m and the placement of heavy equipment on the second floor, the structural form was planned as a braced frame structure. 【Example Overview】 ■ Purpose: Plant building (factory) ■ Structural Type: Steel structure ■ Number of Floors: 2 ■ Design: CRESS FEED Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the structural calculation software 'Super Build/SS7' for S steel frame automated parking lots. Since the floor is a composite slab, we assumed a rigid floor and created a three-dimensional analysis model, with column-beam braces designed as H-shaped steel, where all horizontal forces are supported by braces. This product allows for input in a diagonal spiral format, enabling connections between layers to create an input that closely resembles the actual model. 【Example Overview】 ■ Application: Certain automated parking lot ■ Structural Type: S steel frame ■ Number of Floors: 10 ■ Design: CRESS FEED Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for steel frame factories. This building is a single-story factory with a gable roof that has a gentle slope of 3/100, measuring 7m x 10 spans in the X direction and 17m x 2 spans in the Y direction. The columns are made of cold-formed square steel tubes, and the beams are made of H-shaped steel, creating a frame structure in both the X and Y directions. The building serves as a temporary storage space for construction steel materials and processed building frameworks. 【Case Study Overview】 ■ Purpose: Factory ■ Structural Type: Steel Frame ■ Number of Floors: 1 ■ Design: Komura Architectural Office (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for tenant buildings constructed with S, RC, SRC, and W structures. This building is a tenant building with 1 basement floor and 12 above-ground floors, featuring a mixed structure of elevations and floor plans. The main feature of this project is that out of the 12 above-ground floors, the upper 4 floors are designed as wooden structures, creating an open wooden and wood-based space above 40 meters. 【Example Overview】 ■ Use: Tenant building ■ Structural type: S + RC + SRC + W ■ Levels: 12 above-ground floors, 1 basement floor ■ Design: Shimizu Structural Planning Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the structural calculation software 'Super Build/SS7' for S-frame daycare centers. The daycare center is planned as a single-story building consisting of three branched structures, with a central hall connecting three buildings in a floor plan measuring approximately 20m x 30m in three directions. Creating the overall model was challenging, such as setting coordinates for the dummy street of Yamagata ramen, but we were able to create the model visually by using 3D diagrams and grid input. 【Example Overview】 ■ Purpose: Daycare Center ■ Structural Type: S-frame ■ Floors: 1 floor ■ Design: Stralismo First-Class Architectural Office (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a four-story elementary school building made of steel and reinforced concrete. This is a reconstruction plan for an elementary school building located along the Sai River in Kanazawa City, Ishikawa Prefecture, featuring an RC structure with a swimming pool on the roof in a heavy snowfall area. The U-shaped floor plan is designed to avoid the existing gymnasium and takes into account the impact of rain and snow on the building throughout the year in the Hokuriku climate. The floor plan is structured to avoid structural division of the building through expansion. [Example Overview] - Purpose: Elementary school building - Structural Type: Steel and reinforced concrete - Number of Floors: 4 - Design: bananaLab (Kyoto Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' used for a four-story reinforced concrete office building. This building features a pilotis-style entrance on the first floor, accommodation on the second and third floors, and office space on the fourth floor. Due to the shape of the site and shadow regulations, the height of the building was determined, and to keep the floor heights low while providing flexible spaces on the second, third, and fourth floors, a beamless design was adopted, utilizing flat slabs. 【Example Overview】 ■ Use: Office ■ Structural Type: Reinforced Concrete ■ Number of Floors: 4 ■ Design: Raft Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a 13-story hotel constructed with reinforced concrete (PRC). The second floor and above are planned with either two guest rooms per floor or one room, while the first floor is designed as an entrance hall with a space for light snacks, creating an open and spacious environment. By incorporating a dummy layer on the first floor and unifying nodes, we modeled diagonal members to achieve the intended design. 【Example Overview】 ■ Purpose: Hotel ■ Structural Type: Reinforced Concrete (PRC) ■ Number of Floors: 13 ■ Design: JSD Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story commercial facility made of steel (S construction). All three buildings are planned as steel structures, adopting a pure moment-resisting frame to allow for flexibility and adaptability in the interior space. Building B is designed as an indoor play facility, featuring a large open space with a single span. To accommodate the large roof at different levels associated with Building B, we set the roof side as a dummy layer and conducted the analysis by subordinating it to the main structure. 【Case Study Overview】 ■ Use: Commercial facility ■ Structural Type: Steel construction (S construction) ■ Levels: 1 floor ■ Design: JSD Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a 5-story steel structure factory. In a new construction project for an electrical equipment manufacturing factory, there is a 3-story steel frame building with a penthouse, featuring a large atrium on the second floor, as well as an atrium that extends from the first to the third floor for an automated warehouse. The building has a direct foundation. At the front, there are canopies at different levels of 10m and 6m, and on the first floor, there is a lower roof with varying ceiling heights, which allowed us to utilize the function for specifying dummy layers. 【Example Overview】 ■ Purpose: Factory ■ Structural Type: Steel Structure ■ Number of Floors: 5 ■ Design: Kawai Architectural Design Office (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for an S-shaped warehouse and factory. The warehouse and factory is a single-story steel frame building, with 18 spans in the X direction and 3 spans in the Y direction. The superstructure is a system building, and we only handled the foundation design. The upper stress calculated using a different system building-specific software was temporarily saved in Excel, edited to match the cell configuration for special loads (sheet input) for stress calculations, and then pasted using copy and paste. 【Case Study Overview】 ■ Purpose: Certain warehouse and factory ■ Structural Type: Steel structure ■ Number of Floors: 1 ■ Design: Mori Structural Design Co., Ltd. (Miyagi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for steel frame logistics warehouses. The building in question is a three-story steel frame logistics warehouse constructed in Toyota City, Aichi Prefecture, with a plan shape of 169m in the X direction, 119.5m in the Y direction, a maximum height of 22.599m, and a total floor area of 56,670m². Regarding the foundation structure, since it was a mix of direct foundation and pile foundation, we created two models and proceeded while exchanging data. 【Case Overview】 ■ Purpose: Logistics Warehouse ■ Structural Type: Steel Frame ■ Number of Floors: 3 ■ Design: Earth Field Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the structural calculation software "Super Build/SS7" for a two-story wooden single-family house. This wooden two-story house, built using the frame construction method, has a total floor area of approximately 70m², a eaves height of about 6.5m, and a maximum height of about 9.0m. It is classified as a Type 4 special exception building for the purpose of building confirmation applications. Typically, wooden houses under the Type 4 special exception do not require structural calculations and only involve wall quantity calculations. However, for this building, we utilized the "SS7 Op. Wooden Frame" function to conduct an overall structural check. 【Example Overview】 ■ Purpose: Single-family house ■ Structural Type: Wooden ■ Levels: 2 stories ■ Design: MUSA Research Institute Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the structural calculation software 'Super Build/SS7' used for a two-story children's welfare facility made of reinforced concrete (RC). This building primarily serves as a children's center and after-school club. To consider the surrounding environment and segment the volume, the roof is arranged to have four independent sections. A notable feature is that different roof levels have been set to satisfy the required ceiling heights for each room. Additionally, the second-floor area includes an external terrace that connects the sections around a central courtyard atrium. 【Example Overview】 ■ Purpose: Children's welfare facility, etc. ■ Structural Type: Reinforced Concrete (RC) ■ Number of Floors: 2 ■ Design: Goi Architectural Institute Co., Ltd. (Ishikawa Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a four-story mixed-use commercial facility constructed with steel (S) and reinforced concrete (RC). This building is planned to include multiple retail units (SF2 triangular dry roof), an office building (SF4 octagonal frame dry roof), a parking structure (SF4 self-parking roof solar equipment frame dry roof), and an RC studio building (RCF2 inner child method). The project is designed with structural spans of 28 meters in the X direction, 33 meters in the Y direction, and 17 layers in height, allowing for the entire building to be modeled by incorporating dummy layers and numerous passages. 【Case Study Overview】 ■ Use: Mixed-use commercial facility ■ Structural Type: Steel (S) + Reinforced Concrete (RC) (Inner child method: both upper and lower structures are S with Exp.J) ■ Levels: 4 stories ■ Design: Terui Structural Office (Hiroshima Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the consistent structural calculation software 'Super Build/SS7' for SRC construction offices. In this project, we examined the structural strength of a 9-story above ground and 1-story below ground SRC building during its demolition, which was carried out using demolition machinery from the upper floors. The aim was to select the appropriate machinery that fits within the structural strength limits while varying the load capacity of the demolition machinery, as well as to plan the placement of slab reinforcement supports during this process. 【Case Study Overview】 ■ Purpose: Office (Demolition Work) ■ Structural Type: SRC Construction ■ Levels: 9 stories above ground, 1 story below ground ■ Design: Wyatt Architectural Planning (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the structural calculation software 'Super Build/SS7' for S steel warehouses. This building is a two-story steel structure used as a warehouse, with a plan size of 82 meters on the long side and 32 meters on the short side. Modeling and structural calculations were performed for the main structural framework, which was utilized for member design. Additionally, the calculation output function allowed for the creation of calculation documents related to the main framework, all done using this product. 【Example Overview】 ■ Use: Warehouse ■ Structural Type: Steel ■ Number of Stories: 2 ■ Design: Nose Architectural Structure Laboratory Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the integrated structural calculation software "Super Build/SS7" for offices and hotels. This is a mixed-use facility with offices on the 1st to 3rd floors and a hotel on the 4th to 13th floors. The top floor (13th floor) features a large public bath, and the plan includes an open-air bath with a view of the sea. It has a steel structure measuring 46.9m in the X direction and 19.6m and 12.2m in the Y direction. 【Example Overview】 ■ Use: Office/Hotel ■ Structural Type: Steel Structure ■ Floors: 13 ■ Design: RIA Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce an example of the consistent structural calculation software "Super Build/SS7" for hotels. This building is the eastern wing of a hotel complex (west wing, east wing, parking structure) planned in Okinawa Prefecture. The first floor is a restaurant, floors 1 to 17 are for accommodation (hotel), and the 18th floor features a large public bath. It is an 18-story building with a height of 59.8 meters. Construction is currently underway, with completion scheduled for the end of 2025. 【Example Overview】 ■ Use: Hotel ■ Structural Type: Reinforced Concrete ■ Stories: 18 ■ Design: Shige Architecture Structural Design Office (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the integrated structural calculation software "Super Build/SS7" for clean rooms and offices. This building is a two-story steel structure factory being constructed in Shiga Prefecture. The floor plan shape is a rectangle measuring 60m in the X direction and 32m in the Y direction. The floor heights are 5.60m for the first floor and 3.90m for the second floor. As it will serve as a maintenance factory for production equipment, the first-floor slab is designed to accommodate the installation of a clean room and the movement of forklift vehicles. The roof is a folded plate, and the second-floor slab is a composite deck slab. [Case Study Overview] - Purpose: Clean room and office - Structural Type: Steel structure - Number of Stories: 2 - Design: At Planning Co., Ltd. (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the consistent structural calculation software "Super Build/SS7" for hospitals. We considered the construction steps for expansion, demolition, and renovation, planning to ensure that inpatients and staff can always receive treatment and operate on the premises. We are planning multiple buildings, but we will describe a newly constructed reinforced concrete building measuring 35.5m x 45m with four floors. 【Case Study Overview】 ■ Purpose: A certain hospital ■ Structural Type: Reinforced Concrete ■ Number of Floors: 4 ■ Design: Shimizu Corporation, Nagoya Branch Structural Design Department (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software

We would like to introduce a case study of the structural calculation software "Super Build/SS7" used for a health check center. The building is a single-story health check center with a simple exterior featuring two sloped roofs. Inside, the design utilizes the two sloped roofs to create a central plaza (waiting area) with a ceiling height of 7 meters that crosses the center of the building. Additionally, by exposing wooden beams in the ceilings of the central plaza and entrance, the design allows visitors to feel the presence of natural wood, aiming to create a facility that provides comfort and healing to those who visit. 【Case Study Overview】 ■ Purpose: Certain Health Check Center ■ Structural Type: Reinforced Concrete (RC) ■ Number of Floors: 1 ■ Design: Shimizu Corporation, Nagoya Branch Structural Design Department (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

• Architectural Design Software