1~45 item / All 47 items
Displayed results
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationContact this company
Contact Us Online1~45 item / All 47 items
"SUS630" is a representative steel of the precipitation hardening stainless steel, combining corrosion resistance and high strength. After solution heat treatment (solid solution heat treatment) at 1020 to 1060°C, precipitation hardening heat treatment (aging heat treatment) is applied to precipitate a Cu-rich phase, resulting in high strength and high hardness. This document includes "an example of chemical composition," as well as "heat treatment standards" and "hardness conversion tables" presented in tables. We encourage you to read it. [Contents (partial)] ■ Example of chemical composition ■ Example of physical properties ■ Heat treatment standards ■ Example of mechanical properties ■ Hardness conversion table *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis product is particularly used for billet top rollers (foot rollers) and has a proven track record. "Silicoroy A2" is an all-round type stainless steel that contains approximately 3.5% high silicon in its chemical composition. Silicon contributes to properties such as heat resistance, oxidation resistance, hardness, strength, and corrosion resistance. Due to the approximately 3.5% Si content, it is relatively strong against high-temperature oxidation. 【Features】 ■ Heat resistance ■ Corrosion resistance: Relatively high corrosion resistance against water and strongly acidic powders ■ Fracture toughness (heat check resistance): Minimal occurrence of heat cracks during repeated high temperature to rapid cooling, excellent resistance to crack propagation ■ High-temperature corrosion wear resistance: Superior overall performance contributes to the longevity of the rollers *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationSilicoroilab Co., Ltd. supports your development and provides development assistance, helping to improve development speed, reduce development costs, and assist with promotions. This document includes topics such as "The Eternal Theme of Engineers," "Key Points in Product Development and Prototype Production," and "Company Overview." We encourage you to read it. [Contents (partial)] ■ The Eternal Theme of Engineers ■ Needs of Silicoroil ■ Key Points in Product Development and Prototype Production ■ Services of Silicoroilab ■ Concept ■ Company Overview *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Precipitation-hardened silicon alloy" is applied as a special mold material that utilizes the balance of hardness and corrosion resistance, as well as the mechanism of precipitation hardening. In this document, applications for ultra-precision parts are featured, including "slit coater nozzles (T-die lip)" and "the effects of precision molds and cross forging." We invite you to read it. [Contents (partial)] ■ Slit coater nozzles (T-die lip) ■ Effects of precision molds and cross forging ■ Measurement results of residual austenite in Silicon Alloy XVI *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe "special nut" is a nut designed to prevent loosening, which generates friction torque that strongly compresses the threads of the bolt due to the internal spring action (SUS301), thereby preventing free rotation. This document includes the "friction and wear characteristics" measured using a pin-on-disk type friction and wear testing machine, which assesses friction force and wear amount, as well as a "seizure test using the special nut" conducted for the purpose of comparing practical seizure phenomena. We encourage you to read it. [Contents (partial)] ■ Friction and Wear Characteristics - Conditions for pin-on-disk friction and wear tests - Hardness of test specimens - Combinations of friction and wear tests and test results ■ Seizure Test Using Special Nut - Testing method - Test results *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIn this document, we present technical information such as "the relationship between test temperature and tensile strength" and "the relationship between test temperature and yield strength" using graphs. Additionally, as a method for the "high-temperature corrosion test," test specimens were placed inside a combustion furnace, operated for a certain period, and then removed to investigate the degradation status of each material. We encourage you to read it. 【Contents (partial)】 ■ High-temperature characteristics ■ Oxidation weight gain ■ Heat check characteristics (1) ■ Heat check characteristics (2) ■ High-temperature corrosion test *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Silicoloy B2" is a two-phase stainless steel with corrosion resistance equivalent to or greater than SUS316, while "Silicoloy D" is an austenitic stainless steel with hot strength equivalent to SUS310S, and it also excels in high-temperature oxidation resistance and heat check resistance (thermal shock resistance). This document includes examples of "corrosion resistance of Silicoloy," as well as "high-temperature corrosion resistance" and "corrosion resistance against various industrial chemicals." Please take a moment to read it. [Contents (partial)] ■ Example of chemical composition ■ Example of mechanical properties ■ Example of physical properties ■ Example of microscopic structure ■ Various characteristics of Silicoloy B *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationSilicoalloy (Silicoalloy A2, Silicoalloy XVI) exhibits an excellent balance of hardness and corrosion resistance. This document includes examples of "corrosion resistance of silicoalloy" using tables and graphs, as well as "5.0% hydrochloric acid (HCl) corrosion test" and "example of corrosion resistance after surface modification." We encourage you to read it. [Contents (partial)] ■ Example of corrosion resistance of silicoalloy ■ 5.0% hydrochloric acid (HCl) corrosion test ■ 5.0% sulfuric acid (H2SO4) corrosion test ■ 5.0% nitric acid (HNO3) corrosion test ■ 200ppm sodium hypochlorite solution (NaClO) corrosion test *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationPrecipitation-hardened stainless steel undergoes a different heat treatment process compared to quenched steel, achieving high hardness at relatively low temperatures. This results in fewer issues such as heat treatment distortion, dimensional changes, cracking, and oxidation scale adhesion, making it effective for improving processing processes. In this study, we investigated the dimensional changes caused by heat treatment in precipitation-hardened stainless steel and martensitic stainless steel. This document includes information on "Dimensional Changes in Stainless Steel Heat Treatment," as well as "Surface Modification Techniques" and "Tempering Colors (Oxidation Scale) after Aging Heat Treatment." We encourage you to read it. [Contents (partial)] ■ Dimensional Changes in Stainless Steel Heat Treatment - Testing Methods - Dimensional Changes in Precipitation-Hardened Stainless Steel - Appearance after Heat Treatment *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Silicoloy XVI" is an improved steel type of Silicoloy A2 that possesses a well-balanced combination of high strength, high hardness, corrosion resistance, heat resistance, wear resistance, and seizure resistance, achieving a maximum hardness of HRC 54 or higher (around 55 to 58) as a precipitation-hardened stainless steel. This document includes "an example of chemical composition," "an example of two-stage aging treatment," and "methods for improving toughness (Bend Test: simple bending test)," among other content. Please take a moment to read it. [Contents (partial)] ■ Example of chemical composition ■ Example of physical properties ■ Example of mechanical properties ■ Example of specifications for Silicoloy XVI *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Silicoroy A2" is a precipitation-hardened stainless steel that contains a large amount of Si (silicon) as one of its chemical components. It possesses a well-balanced combination of high strength, high hardness, corrosion resistance, heat resistance, wear resistance, and anti-seizing properties, making it versatile. This document includes examples of "chemical components," "standards of Silicoroy A2," and "microscopic structure and intermetallic compounds," presented in tables. We encourage you to read it. [Contents (partial)] ■ Example of chemical components ■ Example of physical properties ■ Example of mechanical properties ■ Example of standards for Silicoroy A2 ■ Microscopic structure and intermetallic compounds ■ Heat treatment characteristics *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationSilicon (Si), which was considered an impurity, has been actively utilized as a substitute for carbon (C), and by precipitating finer intermetallic compounds, a new material has been born. This document includes sections such as "What is Silicoroy?", "Advantages of Silicoroy", "Types of Silicoroy", and "An Example of the Chemical Composition of Silicoroy". Please take a moment to read it. [Contents (partial)] ■ What is Silicoroy? ■ Advantages of Silicoroy ■ Types of Silicoroy ■ What is Precipitation Hardening Stainless Steel? ■ Balance of Hardness and Corrosion Resistance *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes a comparison of precipitation-hardened stainless steel and various types of stainless steel in seizure tests. Using a pin-on-disk type friction and wear testing machine, we measured the seizure resistance of various materials and heat treatments. Under low-speed, high-load (step-type) testing conditions, we measured the friction coefficient and investigated the load (contact pressure) at which the friction coefficient sharply increases. We encourage you to read it. 【Contents (partial)】 ■ Seizure test (pin-on-disk) ■ Test conditions ■ Shape of test specimens ■ Types of test specimens (disks) and their heat treatment states ■ Combinations of seizure tests and test results *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes a comparison of various stainless steels in pitting potential measurement tests, focusing on precipitation-hardened stainless steels. We present test results for "SUS304," "SUS440C," "SilicoLOY A2," "SilicoLOY XVI," and others in graphical format. We invite you to read it. 【Contents】 ■Test specimens ■Natural potential ■Pitting potential (10μA) ■Pitting potential (100μA) ■Test results (graphs) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes a comparison of single specimens and test bodies assembled with bolts and nuts in a dissimilar metal contact corrosion test, as well as comparisons of precipitation-hardened stainless steel and various types of stainless steel. The test bodies with bolts and nuts were combined and immersed in tap water at 65°C, and for comparison, single specimens (plate-shaped test pieces) were also evaluated. After 45 days of immersion, the test pieces were removed and photographs were taken. Please take a moment to read it. 【Contents】 ■ Test Method ■ Test Equipment ■ Test Specimen (Single) ■ Test Specimen (Bolt-Nut Combination) ■ Test Results (Single) ■ Test Results (Bolt-Nut Combination) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes various heat treatment conditions for precipitation-hardened systems in Charpy impact tests and comparisons of different types of stainless steel. We present photographs of the appearance after testing, including "Silico Alloy XVI" and "SUS420J2." The testing machine used was a Charpy impact testing machine (Shimadzu Corporation 300J testing machine). We encourage you to read it. [Contents] ■ Testing Equipment ■ Shape of Test Specimens ■ Shape of Test Specimens (Appearance Photos) ■ Test Specimens and Heat Treatment ■ Test Results ■ Appearance After Testing *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes the S-S curves (stress-strain curves) from tensile tests, various heat treatment conditions for precipitation hardening systems, and comparisons of different types of stainless steel. The testing machine used is a precision universal testing device (Shimadzu AG-100KND). We present test results for "Silicoalloy A2-ST," as well as "Silicoalloy A2-OAG520" and "SUS630-H900." We invite you to read it. 【Contents】 ■ Testing equipment ■ Shape of test specimens ■ Test results ■ S-S curves (stress-strain curves) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes a comparison of various heat treatment conditions for precipitation hardening systems in salt spray tests, as well as the aging changes of various stainless steels and high alloys. The testing equipment used is a composite cycle testing machine (CYP-90D manufactured by Suga Test Instruments Co., Ltd.). Appearance photographs were taken after 0, 5, 24, 48, 72, 96, and 240 hours, and weights were measured before the test and after 240 hours. Please take a moment to read it. [Contents] ■ Testing methods, testing equipment, specimen shapes, specimens ■ Appearance after testing (aging changes) ■ Appearance after testing (before and after cleaning) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document includes a comparison of various heat treatment conditions for precipitation hardening systems, various stainless steels, and high alloys in friction and wear characteristic tests (ball-on-disk, pin-on-disk). Using a ball-on-disk type friction and wear testing machine, we measured the friction force and wear amount. The specific wear rate was calculated using the mass loss method, and a comparison of the specific wear rates for different material combinations was conducted. We invite you to read it. [Contents (partial)] ■ Friction and wear characteristic tests (ball-on-disk, pin-on-disk) ■ Test conditions ■ Types of balls (test pieces) ■ Shape of test pieces ■ Appearance of test pieces ■ Types of test pieces (disks) and heat treatment conditions *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis document introduces the use of precipitation-hardened silicoalloys. It includes topics such as "Heat Treatment Characteristics/Precipitation Hardening," "Examples of Silicoalloy Applications/High Hardness × Corrosion Resistance," and "New Process Design/Localized Softening Treatment." Silicoalloys harden by precipitating Si-based intermetallic compounds, excelling in the balance of hardness and corrosion resistance. [Contents (partial)] ■ What is Silicoalloy? ■ Heat Treatment Characteristics/Precipitation Hardening ■ Tribological Properties/Pin-on-Disk Wear Test ■ Examples of Silicoalloy Applications/High Hardness × Corrosion Resistance ■ Heat Resistance/High-Temperature Hardness *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Silicoroy XVI" is a precipitation-hardened stainless steel that excels in the balance of high hardness and high corrosion resistance. In addition to a high-silicon, ultra-low carbon composition, it features a new mechanism that precipitates hard intermetallic compounds, making it a new material distinct from hardened steel types. It possesses high hardness equivalent to 56-58 HRC and corrosion resistance comparable to SUS304. Additionally, we offer "Silicoroy metal powder," suitable for powder bed fusion (metal 3D printing) and thermal spraying. [Features] - High functionality with high hardness and high corrosion resistance → Precipitation of hard intermetallic compounds from ultra-low carbon, Si-based materials - Low dimensional changes during heat treatment → Increased hardness through low-temperature aging heat treatment - Suppression of aging changes due to ultra-low residual austenite → Ultra-low carbon content of 0.02% - Flexibility in heat treatment design → Easy fine-tuning of hardness *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIn recent years, issues such as aging changes and deformation in precision parts have become a concern. This time, with the aim of understanding the various characteristics of different materials and heat treatment conditions, we investigated the amount of residual austenite and residual stress using a micro-area X-ray stress measurement device (Auto MATE, manufactured by Rigaku Corporation). For more details, please download and view the catalog. 【Classification and Materials of Test Specimens (Partial)】 ■ Tool Steel (Material: SKD11) ■ Martensitic (Material: SUS420J2) ■ Martensitic (Material: SUS440C) ■ Precipitation Hardening (Material: SUS630) ■ Precipitation Hardening (Material: SilicoLOY A2) ■ Precipitation Hardening (Material: SilicoLOY XVI) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis is an introduction to the hardness reduction test of age-hardened materials after holding at 700°C. The aim is to investigate the hardness reduction in a short-term high-temperature holding environment, such as during brazing. Test specimens that have undergone aging treatment were placed in an electric furnace (atmospheric furnace) held at 700°C, and hardness measurements were conducted after removing them at various set times and returning them to room temperature. Additional aging treatment (460°C×4hr/AC) was performed on the same test specimens, followed by re-measurement. For more details, please download and view the catalog. [Test Specimens] - Material: Silicoalloy XVI (round bar) φ28mm×10mm, cut into four pieces - Solution treatment: 1050°C/WQ - Pre-aging: 200°C×2hr/AC - Age-hardening heat treatment: 460°C×12hr/AC - Polishing finish: Polished with waterproof paper #400 (oxide scale removed) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe will introduce the 5.0% NaCl (saltwater) immersion test for "Silicoroy." First, the test solution is prepared with 5% saltwater, and the test specimens are produced from each material under various heat treatment conditions. The surface roughness is adjusted using waterproof sandpaper #400, and degreasing is performed with acetone. Each material is immersed in 5% saltwater at room temperature for 192 hours, and the presence or absence of any occurrences is investigated. For more details, please download and view the catalog. [Test Specimens (Partial)] ■ Silicoroy A2-AG ■ Silicoroy XVI-DAG ■ Silicoroy AC1-AG ■ SUS630-H900 ■ Maraging Steel-ST *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe will introduce the corrosion resistance test of "Silicoroi." First, prepare a test solution of 6% hydrochloric acid and ferric chloride solution. The test specimens are produced from various materials under different heat treatment conditions. The surface roughness is adjusted using waterproof sandpaper #400, and degreasing is performed with acetone. Then, each material is immersed in the 6% hydrochloric acid and ferric chloride solution at room temperature for 96 hours, and the weight changes before and after the test are measured using a precision balance to determine the corrosion rate. For more details, please download the catalog and take a look. [Test Specimens (Partial)] ■SUS304 ■SUS316L ■SUS420J2 ■SUS440C ■SUS630-H900 *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationTo compare practical seizure phenomena, we conducted seizure tests using special nuts. The special nuts are designed to prevent loosening and generate friction torque that prevents free rotation by applying strong pressure on the threads of the bolt through the internal spring action (SUS301). Generally, they are used with lubricants, but this time we applied them in a non-lubricated state for the seizure tests and compared various materials. For more details, please download and view the catalog. [Test Method] ■ Tighten the special nuts onto bolts of each material (M17×40, pitch 1.0) (screw in with a wrench and unscrew) ■ Conduct seizure evaluation *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationOur company conducted an evaluation of the seizure resistance of bolts and nuts. We performed a comprehensive comparative test using various materials, the presence or absence of surface treatment, types of surface treatment, and the presence or absence of high-temperature oxidation tests, based on the anti-seizure treatment test methods. The test types correspond to the anti-seizure treatment test standards of the Japan Water Works Association JWWA G 113 and G 114. For details such as test results, please download and view the catalog. 【Test Conditions (Partial)】 ■ Tightening Torque: 100 N·m ■ Nut Movement Distance During Tightening: 5–10 mm (Target Value) ■ Number of Tightening Cycles: 5 ■ Test Specimen Size: Hex Bolt and Nut, M16×90 (Partially Threaded) ■ Test Specimen Material: SUS304J3, Silicoloy A2 (OAG), SUH660 (ST) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe will introduce the laser heat treatment tests of "Silicoloy." Laser heat treatment technology can minimize thermal effects on the base material compared to high-frequency heat treatment, allowing for localized hardening or softening. By combining the heat treatment characteristics of the precipitation-hardened Silicoloy with laser heat treatment (localized solid solution heat treatment), we aim to establish a new process design. This time, we conducted evaluation tests using the moving solid solution method and high-speed rotating solid solution method. For details of the tests, please download the catalog. 【Moving Solid Solution Test Conditions】 ■ Laser Oscillator: LDF4000 ■ Beam Shape: 11mm × 6mm ■ Absorber: Present ■ Moving Speed: 20cm/min ■ Upper Limit Output: 1000W-1200W *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe will introduce the friction and wear characteristics testing of laser cladding (ball-on-disk). Using a ball-on-disk type friction and wear testing machine, we measured the friction force and wear amount. The specific wear rate was calculated using the mass loss method, and a comparison of the specific wear rates for each material combination was conducted. For detailed information about the test, please download the catalog. 【Test Conditions】 ■ Lubrication: Dry (no lubrication) ■ Test Temperature: Room temperature ■ Ball: 3/8in, SUS440C, SUJ2 ■ Load: 9.8N (1kgf) ■ Friction Speed (Rotational Speed): 12.6m/min (400rpm) ■ Friction Time: 600sec *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIt has been found that the addition amount of WC (tungsten carbide) to the Silicoroy XVI powder should be below 30%. This time, we investigated the appropriate conditions for laser cladding when the WC powder addition amounts were set at 20% and 30%. For details of the tests, please download and view the catalog. 【Test Conditions (Partial)】 ■ Beam Shape: 5mm × 5mm ■ Laser Output: 1000, 1150, 1250, 1500, 1750, 2000, 2500, 2700 ■ Base Material: Silicoroy A2, 50mm × 50mm × 13mm ■ Metal Powder: Silicoroy XVI (gas-atomized) ■ Powder Particle Size: -106/+63μm ■ Test Content: 1-layer build-up, 2-layer build-up, 3-layer build-up *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIt has been found that Silicoloy XVI powder is a material that is very easy to laser cladding, but there are challenges regarding its wear resistance in abrasive wear. Therefore, this time we investigated the various properties resulting from the composite effect of Silicoloy XVI powder and WC powder (tungsten carbide). For more details, please download and view the catalog. 【Test Conditions (Partial)】 ■ Beam Shape: 5mm x 5mm ■ Laser Output: 1250W ■ Base Material: SUS304, 50mm x 50mm x 10mm ■ Metal Powder: Silicoloy XVI (gas-atomized) ■ Powder Particle Size: -106/+63μm *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationLaser cladding technology can minimize the thermal impact on the base material, enabling low dilution, low distortion, fine, and thin overlay applications. By applying the high corrosion resistance, high hardness, wear resistance, and good fluidity of "Silicoloy" to laser cladding, we aim to establish a new process design. This time, we conducted evaluation tests using metal powder of the precipitation-hardened Silicoloy through laser cladding. For more details, please download and view the catalog. 【Test Conditions (Partial)】 ■ Beam Shape: 5mm × 5mm ■ Laser Output: 2700W ■ Base Material: SUS304, 50mm × 50mm × 10mm ■ Metal Powder: Silicoloy XVI (Gas Atomized) *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Silicoloy" has composite properties of heat resistance, corrosion resistance, wear resistance, and high-temperature oxidation resistance, contributing to a reduction in the frequency of roller replacements, maintenance, and overall cost reduction. "Silicoloy A2" is an all-round stainless steel that contains approximately 3.5% high silicon in its chemical composition. Silicon contributes to properties such as heat resistance, oxidation resistance, hardness, strength, and corrosion resistance. Rollers made of Silicoloy A2 are particularly used for top rollers (foot rollers) for billets and have a proven track record. 【Features of Silicoloy】 ■ Corrosion resistance: Relatively high corrosion resistance against water and strongly acidic powders. ■ Fracture toughness (heat check resistance): Minimal occurrence of heat cracks from repeated high temperature to rapid cooling, with excellent resistance to crack propagation. ■ High-temperature corrosion wear resistance: Superior overall performance, contributing to the longevity of rollers. *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration"Silicoroy B2" and "Silicoroy D" are high-silicon stainless steels that contain a large amount of Si (silicon) as one of their chemical components. "Silicoroy B2" is a duplex stainless steel (austenitic-ferritic) that has higher strength than austenitic stainless steels and possesses corrosion resistance equivalent to or greater than SUS316. On the other hand, "Silicoroy D" is an austenitic stainless steel with hot strength equivalent to SUS310S. This document compiles data primarily on corrosion-resistant alloys and heat-resistant alloys, and we hope it will assist you in your development efforts. [Contents (partial)] ■ Introduction ■ Example of chemical composition ■ Example of mechanical properties ■ Example of physical properties ■ Example of microscopic structure *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe precipitation-hardened silicon alloy can achieve localized high hardness depending on the application. When both hardness and toughness are required, localized solution heat treatment can be performed, and aging heat treatment can be implemented to achieve high hardness only in the necessary areas. Unlike high-frequency quenching, precipitation-hardened silicon alloys do not become highly hardened after high-frequency heat treatment. Since sufficient machining can be done after high-frequency heat treatment (solution treatment), the design flexibility is increased. For more details, please download and view the catalog. [Examples of Localized High Hardness Products] ■ Special Shafts - Only the tip and sliding parts are hardened to high hardness (HRC50 and above) - The overall structure maintains toughness (HRC35) ■ Bridge Bearing Rollers - Only the surface of the rollers is hardened to high hardness (HRC50 and above) - The overall structure maintains toughness (HRC35) *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe document is an example of a pin-on-disk friction and wear test (dry). The results vary depending on the material combinations and test conditions. Photos of wear scars that illustrate the effects of surface modification and the wear scars when the disk is made of SUS440C are included. Additionally, there is a table summarizing examples of thermal processing conditions for precision machining processes, so please take a moment to read it. [Contents Included] ■ Test Conditions ■ Specific Wear Rate when the disk is SUS440C ■ Specific Wear Rate and the effect of surface modification ■ Wear Scars (when the disk is SUS440C) ■ Wear Scars (effect of surface modification) ■ Precision Machining Process *For more details, please refer to the PDF document or feel free to contact us. *Detailed information on friction and wear characteristics is included in the following catalogs: [Catalog] Silicoroy Technical Handbook (118P), Chapter 8 [Catalog] Silicoroy Technical Handbook Pro1 (164P), Chapters 3 & 9 [Catalog] Silicoroy Technical Handbook Pro2 (106P), Chapter 4 [Catalog] Silicoroy XVI MAST Hard-on Plate Technical Document, Chapters 3 & 5
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationPrecipitation-hardened stainless steel achieves high hardness through relatively low-temperature heat treatment, resulting in fewer issues such as distortion, cracking, and oxidation scale attachment compared to quenched steel. This contributes to the simplification of the processing process and shorter delivery times. Precipitation-hardened silicoalloy is characterized by minimal dimensional changes during aging heat treatment and surface modification treatment at temperatures below 500°C. Silicoalloy resolves processing process issues. For more details, please download and view the catalog. 【Heat Treatment Features】 ■ Quenched Steel: Quenching and Tempering - Rapid cooling from high temperatures (water cooling or oil cooling) can easily lead to distortion and cracking. - Dimensional changes occur, necessitating finishing processes. ■ Precipitation-Hardened Aging Heat Treatment / Two-Step Aging Treatment - Air cooling from relatively low temperatures makes distortion and cracking less likely. - Dimensional changes occur, necessitating finishing processes. *For more details, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationGenerally, martensite in iron alloys that do not contain carbon is soft and highly ductile, but on the other hand, it has low strength, and since there is almost no carbon present even after tempering, carbide precipitation hardening is not possible. Instead of carbides, fine precipitate particles of intermetallic compounds are dispersed to enhance strength, as seen in precipitation-hardened stainless steels like SUS630 and SUS631, as well as ultra-high strength steels like maraging steel. Among silico-alloy steels, "Silico-Alloy A2" and "Silico-Alloy XVI" utilize a precipitation hardening mechanism, particularly characterized by the refined matrix structure of "Silico-Alloy XVI," which has hard intermetallic compounds precipitating. For more details, please download and view the catalog. 【Precipitation-Hardened Silico-Alloy】 ■ Silico-Alloy A2 ■ Silico-Alloy XVI *For more information, please refer to the PDF materials or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIntroducing the advantages and types of the all-around stainless steel "Silico Alloy (precipitation hardening type)" that combines multiple properties in a single steel. It excels in the balance between hardness and corrosion resistance, and high hardness can be achieved through low-temperature heat treatment. There are four types of steel, ranging from high strength to high hardness, corrosion resistance, and heat resistance. 【Advantages】 ■ Combines multiple properties in a single steel ■ Excellent balance between hardness and corrosion resistance ■ High hardness achievable through low-temperature heat treatment (aging hardening characteristics) ■ High degree of freedom in heat treatment design ■ Silico Alloy is a niche new material *For more details, please refer to the PDF document or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationIn the development of applications for silicone, fundamental research is important. We provide fundamental research and various testing content tailored to the applications.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationSilicoroy is a new material that was born from the research of Japanese researchers who, after many years of study, were the first in the world to elucidate the mechanism of high-strength high-silicon steel (Journal of the Japan Iron and Steel Institute, Vol. 28, No. 9 "The Birth of High-Silicon Tough Steel," Emeritus Professor Keiichi Ota, Kansai University). While inheriting the DNA of an indomitable research spirit, the current "precipitation-hardened high-silicon Silicoroy" has been developed.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationA comprehensive catalog that explains the all-around stainless steel "Silico Alloy," which combines multiple characteristics in a single steel. We offer several catalogs, including a digest version, a technical catalog, and one for professionals.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationA comprehensive catalog that explains the all-around stainless steel "Silico Alloy," which combines multiple properties in a single steel. We offer various catalogs, including a digest version, technical catalog, and professional edition.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe document includes detailed test data on laser cladding using Silcolloy XVI metal powder (laser overlay processing), a new laser cladding technology with Silcolloy XVI + WC (tungsten carbide) dispersion, laser heat treatment (local solution heat treatment), seizure tests, pitting resistance tests, and measurements of residual austenite and residual stress. It also includes comparative materials for Silcolloy and various types of stainless steel.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThe usage of the extracted hardening system silicone alloy "presentation," metal powders, wear tests, salt spray tests, mechanical properties (tensile tests, impact tests), dissimilar metal contact corrosion tests, pitting potential, seizure tests, etc., are detailed with test data. Comparison materials for silicone alloys, various stainless steels, and high alloys are provided.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration