Ultrasonic thickness gauge(0.01mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

Ultrasonic thickness gauge Product List

16～30 item / All 41 items

Displayed results
Ultrasonic Thickness Gauge 'DM4' [Rental]

Ultrasonic Thickness Gauge 'DM4' [Rental]

This is a device designed for general thickness measurement on equipment such as plants that can only be measured from one side.

**Features** - DUAL MULTI function: Measures the thickness of the substrate coated with just one button. - When using the DUAL MULTI function, it can measure the substrate thickness of approximately 2 to 30 mm over paint, plastic coatings, etc. - Optimal measurement sensitivity can be adjusted with automatic sensitivity adjustment/manual sensitivity adjustment (Lo/Med/Hi/Auto). - Upper and lower limit settings available (with LED alarm). - Comparison mode (Dif Mode) displays the difference between the set reference thickness and the measured thickness. - Pocket-sized for one-handed operation. - All functions can be easily operated with fewer keys. - Backlit display that is large and easy to read. - Frequency selection through band filters that match the frequency of the probe. - Automatic gain adjustment. - Automatic identification of DIALOG intelligent probes. - Minimum value detection (25 times per second) with minimum capture mode.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'HPX DL+' for GFRP, CFRP, and Rubber

Ultrasonic Thickness Gauge 'HPX DL+' for GFRP, CFRP, and Rubber

The most powerful ultrasonic thickness gauge in Dakota. Capable of measuring the thickness of GFRP, CFRP, rubber, high-density polyethylene, and cast metals.

The HPX DL+ is the most powerful ultrasonic thickness gauge developed for high-damping materials by Dakota. It measures the thickness of materials such as glass fiber and carbon fiber reinforced plastics (GFRP and CFRP), rubber, high-density polyethylene (HDPE), and cast metals. It also supports thickness measurement of composite materials over 100mm. It features a built-in 4GB data logger, allowing measurement data to be easily transferred and displayed on a PC using the included USB cable. It can also be powered via a mobile battery or a USB connector from a computer. ■ Features - A powerful ultrasonic thickness gauge for high-damping materials (GFRP, CFRP, rubber, etc.) - Supports thickness measurement of composite materials over 100mm - Newly developed low-frequency transducer with excellent transmission power at 500kHz - Filter optimized for measuring high-damping materials - Large capacity data storage (4GB) and USB power supply *For more details, please refer to the PDF document or contact us.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge '37DL PLUS' [Rental]

Ultrasonic Thickness Gauge '37DL PLUS' [Rental]

Even if the surface is coated or painted, it has many features that allow for easy measurement of the original metal thickness.

**Features** - The patented THRU-COAT technology allows for the measurement and display of the thickness of metal and coating using a single bottom echo. - The temperature compensation function adjusts the material sound velocity in response to changes in material temperature. - The average/minimum mode saves the average or minimum thickness measurement values. - The A-scan display has improved contrast and visibility, achieving a brighter display. - A wide range of dual and single transducers (contact type, delay line type, immersion type) are available for use. - The EMAT transducer can measure the thickness of iron without using a coupling medium from surfaces with scale buildup. - Grid point flags (minimum, maximum, alarm, A-scan) can be selected. - The grid file can be expanded by adding columns or rows or changing the direction of increase. - The file-based alphanumeric data logger allows for a maximum of 32 characters in the file name and up to 20 characters in the ID number.

  • Measurement and analysis equipment leasing and rental
  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electromagnetic Ultrasonic Thickness Gauge 'UT-3M-EMA'

Electromagnetic Ultrasonic Thickness Gauge 'UT-3M-EMA'

No need to apply a catalyst, measurement can be done directly without removing the oxide film (rust, scale) with a grinder, and it is also ideal for measuring the thickness of the base material of coatings.

The UT-3M-EMA is a high-performance electromagnetic ultrasonic thickness gauge that uses electromagnetic ultrasonic transducers (EMAT). Unlike conventional ultrasonic thickness gauges, it does not require the application of a couplant (contact medium), allowing for easy measurement of metal thickness. In addition to multiple manual measurement modes suitable for professional use, it also features a simple measurement mode for beginners, making it easy for anyone to use right away. It has a measurement range of 1.2 to 200 mm and includes multiple measurement modes such as single echo and echo-echo, accommodating various measurement applications. Furthermore, it features a clear 3.5-inch high-precision display, allowing for stress-free use even during long inspections. ■ Features - Measurement range of 1.2 mm to 200 mm (iron) - No need for couplant (contact medium, liquid) application - Easily measures the thickness of the substrate (base material) of painted materials - Can measure without removing oxidation coatings (rust, scale) with tools like grinders - Includes manual measurement modes as well as a simple measurement mode for beginners - Data management software is included as standard *For more details, please refer to the PDF document or contact us.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'MVX Ver.2'

Ultrasonic Thickness Gauge 'MVX Ver.2'

All-round model equipped with A scope and independent 2 gates, usable for various purposes.

The MVX Ver.2 is a high-end model of an ultrasonic thickness gauge equipped with an A-scope. It allows for measurements while confirming echoes, even in inspection targets prone to noise, such as cast iron, FRP, and severely corroded piping, ensuring reliable detection of the bottom echo. The measurement range is from 0.63 to 1,000 mm in pulse-echo mode and from 2.5 to 50 mm in echo-echo mode (measuring the base material thickness without removing the coating). It features various functions such as A/B scope display, independent dual gates, alarm mode, scan mode, and USB power supply. It has a built-in 4GB data logger, allowing for easy transfer and display of measurement data on a PC. ■ Features - A-scope display showing ultrasonic waveforms and B-scope display showing cross-sectional images - An astonishing measurement range of 0.63 mm to 1,000 mm (steel equivalent) - Echo-echo mode for measuring base material thickness without removing the coating - Screen update at 25 times per second, with ultra-fast measurements of 250 times per second in scan mode - Multi-stage sensitivity adjustment function - USB power supply function - IP65 dustproof and drip-proof performance with a 2-year warranty *For more details, please refer to the PDF document or contact us.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'CMX Ver.2 / CMX DL Ver.2'

Ultrasonic Thickness Gauge 'CMX Ver.2 / CMX DL Ver.2'

Simultaneously measure the film thickness and the thickness of the base material, completely renewing the hardware to significantly improve measurement accuracy and range.

CMX Ver.2 is a revolutionary ultrasonic thickness gauge that can measure not only the thickness of the base material but also the film thickness simultaneously. It has been reborn as Ver.2 with a complete overhaul of the internal hardware while maintaining its exterior, significantly improving measurement accuracy, range, and processing speed. In addition to the existing features such as B-scope display, sensitivity adjustment, automatic zero point adjustment, temperature compensation, and scan mode (high-speed sampling & minimum/maximum hold function), it now includes an astonishing measurement range of 0.63mm to 1,000mm, TDG (Time-Dependent Gain) technology, and USB power supply functionality. The CMX DL Ver.2 is equipped with 4GB of internal memory, allowing measurement values to be saved in the main unit. ■ Features - Revolutionary ultrasonic thickness gauge capable of measuring film thickness - Astonishing measurement range of 0.63mm to 1,000mm (equivalent to steel) - High-precision thickness measurement using multi-echo mode - Screen update at 25 times per second, and ultra-fast measurement at 250 times per second in scan mode - Multi-stage sensitivity adjustment function - USB power supply functionality - IP65 dust and drip-proof performance and a 2-year warranty *For more details, please refer to the PDF document or contact us.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'TI-56H (for High Temperature)' [Rental]

Ultrasonic Thickness Gauge 'TI-56H (for High Temperature)' [Rental]

It is an ultrasonic thickness gauge that can be measured simply by applying the probe from one side and allows for non-destructive measurement.

【Features】 ■ You can start using it immediately by simply adjusting the zero point and sound speed. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ Thanks to the sound speed memory, once the sound speed is adjusted, the set sound speed value is retained even when the power is turned off, and no further adjustments are needed until the material of the test specimen changes. ■ The coupling mark is displayed on the LCD screen to check whether the ultrasound is being correctly received, allowing you to determine if the measurement is normal. ■ It is compact and lightweight, powered by a single AA alkaline battery, making it suitable for long-term use in the field.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision Ultrasonic Thickness Gauge 'PZX-7 Series'

Precision Ultrasonic Thickness Gauge 'PZX-7 Series'

Next-generation precision ultrasonic thickness gauge achieves stable measurements in 0.001mm increments.

The PZX-7 series is a precision ultrasonic thickness gauge capable of measuring materials as thin as 0.15mm with a resolution of 0.001mm. With newly designed signal processing technology, it achieves overwhelming high precision and measurement range compared to the conventional PX-7 series. It features a variety of functions including single-point and dual-point calibration, scan mode, alarm mode, differential thickness measurement mode, sensitivity adjustment, sound velocity measurement mode, and USB power supply capability. Additionally, it is equipped with a pulse-echo mode that supports a measurement range of 2mm to 900mm, allowing for precise thickness measurements of both thin and thick materials. The PZX-7DL can store up to 10,000 measurement values. ■ Features - High-resolution thickness gauge with 0.001mm display - Astonishing measurement range from 0.15mm to 900mm - Sound velocity measurement mode for various materials including resin and cast iron - Ideal size for Japanese people, who have smaller hands compared to Westerners - Supports both AA batteries and USB power supply - IP65 dustproof and drip-proof performance with a 5-year warranty

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'TI-55F (for Castings)' [Rental]

Ultrasonic Thickness Gauge 'TI-55F (for Castings)' [Rental]

This is an improved ultrasonic thickness gauge for measuring the thickness of castings. It can measure the thickness of castings made of iron, aluminum, and other materials, as well as their products.

This is an improved ultrasonic thickness gauge for measuring the thickness of castings. It can measure the thickness of castings made of iron, aluminum, and their products.

  • Structural Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'AD-3253B' [Rental]

Ultrasonic Thickness Gauge 'AD-3253B' [Rental]

Measuring the thickness of homogeneous metals and non-metals is possible! Thickness gauge using ultrasound.

The "AD-3253B" is an ultrasonic thickness gauge that can measure the thickness of homogeneous metals and non-metals that allow ultrasonic waves to pass through. If the speed at which ultrasonic waves travel through the material (i.e., the speed of sound) is known, the thickness can be easily measured. 【Features】 ■ Utilizes ultrasonic waves ■ Measures thickness of metals and non-metals ■ Allows for easy thickness measurement * For more details, please download the PDF or feel free to contact us.

  • Other measuring instruments
  • Measurement and analysis equipment leasing and rental

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'TI-56F (for Castings)' [Rental]

Ultrasonic Thickness Gauge 'TI-56F (for Castings)' [Rental]

It is an ultrasonic thickness gauge that can be measured simply by applying the probe from one side and can measure non-destructively.

- You can start using it immediately just by performing zero point adjustment and sound speed adjustment. - The auto power-off function automatically turns off the power if no operation is performed for more than 3 minutes. - Thanks to the sound speed memory, once you adjust the sound speed, the set sound speed value is retained even when the power is turned off, and no further sound speed adjustment is needed until the material of the test specimen changes. - The coupling mark is displayed on the LCD screen, allowing you to check whether the ultrasound is being received correctly and to determine if the measurement is normal. - It is compact and lightweight, powered by a single AA alkaline battery, allowing for long-term use in the field.

  • Structural Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'UDM-580DL' [Rental]

Ultrasonic Thickness Gauge 'UDM-580DL' [Rental]

An ultrasonic thickness gauge with a built-in data logger that allows thickness measurement over coatings. It is the definitive instrument for measuring the thickness of corroded areas.

■KHK certified product ■Thickness measurement is possible over various coatings. ■Stable measurements can be made against back-side corrosion. ■Built-in data logger allows for data processing on a computer. ■Large LCD display with backlight. ■Can record up to 6400 data points. ■Alternating measurements are possible, considering work efficiency.

  • Structural Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'UDM-1100' [Rental]

Ultrasonic Thickness Gauge 'UDM-1100' [Rental]

Pocket-type ultrasonic thickness gauge specifically designed for special resins such as FRP, plastic, and rubber. An excellent thickness gauge that cuts out unnecessary noise.

■One-touch operation: Thickness can be measured from one side ■Easy operation: No specialized knowledge or skill required ■Stable display: Built-in μCPU for enhanced performance ■Easy-to-read display in dark places: Large LCD with EL backlight ■Compact and lightweight: Pocket-sized with a body weight of only 290g

  • Structural Survey

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'TI-56K (for Thin Materials)' [Rental]

Ultrasonic Thickness Gauge 'TI-56K (for Thin Materials)' [Rental]

It is an ultrasonic thickness gauge that can be measured by simply applying the probe from one side and can perform non-destructive measurements.

【Features】 ■ You can start using it immediately by simply adjusting the zero point and sound speed. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ Thanks to the sound speed memory, once you adjust the sound speed, it retains the set sound speed value even when the power is turned off, eliminating the need for further adjustments until the test material changes. ■ The coupling mark displayed on the LCD screen allows you to check whether the ultrasound is being received correctly, helping you determine if the measurement is normal. ■ It is compact and lightweight, powered by a single AA alkaline battery, allowing for long-term use in the field.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Thickness Gauge 'TI-55K (for Thin Materials)' [Rental]

Ultrasonic Thickness Gauge 'TI-55K (for Thin Materials)' [Rental]

It is an ultrasonic thickness gauge that can be measured simply by applying the probe from one side and can perform non-destructive measurements.

【Features】 ■ Just by performing zero point adjustment and sound speed adjustment, it can be used immediately. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ With the sound speed memory, once the sound speed is adjusted, the set sound speed value is retained even when the power is turned off, and no further sound speed adjustment is needed until the material of the test specimen changes. ■ A coupling mark is displayed on the LCD screen to check whether the ultrasound is being received correctly, allowing for a judgment on whether the measurement is normal. ■ Compact and lightweight, it can be used for extended periods in the field with just one AA alkaline battery.

  • Non-destructive testing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Ultrasonic thickness gauge

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.