Withcut Back Grinding Tool
High-efficiency finish machining of stainless steel and heat-resistant alloys.
This is an insert for after grinding that is favored by Swiss people who prefer Swiss-made products.
- Company：山田マシンツール
- Price：Other
Inserts - List of Manufacturers, Suppliers, Companies and Products
Inserts Product List
1～7 item / All 7 items
Displayed results
【Cutting Report】HORN S45C Processing Case: Comparison of Chip Formation with Different Breakers
Conducting a comparison test for cutting edge processing! Please refer to this if you are having trouble with chip disposal.
The material being machined this time is S45C, and we performed interrupted cutting using three different types of HORN breakers to compare chip removal. As additional information, we also measured not only the chips but also the arithmetic average roughness Ra (μm) and the maximum height of the profile Pt (μm). The machining was done under the same conditions, with an insert width of 2.0 mm, a cutting speed of 180 m/min, a constant peripheral speed, and a feed rate of 0.08 mm/rev for comparison. Each breaker has different characteristics, and you should be able to see the differences in the chips. *For detailed content of the column, please refer to the related link. For more information, feel free to contact us.
- Company：IZUSHI
- Price：Other
Aluminum manifold crack repair MS method aluminum casting repair cast steel repair
This is a record of repairing cracks in the aluminum exhaust manifold!
【Product PR】 "MS Insert" is a female threaded part designed to repair damaged bolt holes. An insert utilizing a special structure on the outer diameter thread is embedded into the bolt hole area for restoration. It is difficult to pull out and does not put stress on the base material, making it suitable for areas that are constantly exposed to vibrations or at the ends. Compared to conventional products such as spring-type coils and self-tapping items, it improves precision and demonstrates groundbreaking effects in terms of durability. Additionally, by applying it in areas where bolts are frequently attached and detached, permanent measures can be implemented. 【Features】 ■ Difficult to pull out and does not stress the base material ■ Ideal for permanent solutions for threaded holes ■ Can be used to strengthen and restore thread profiles ■ Enables application at the ends → Designed with upward-facing threads that pull the surrounding base material towards the center of the screw from all directions For more details, please contact us or download the catalog.
- Company：日之出水道機器 メカニカルスティッチ部
- Price：Other
Thread hole repair, aluminum thread hole restoration, bolt hole repair, screw thread regeneration method.
Can be used as a permanent solution for broken screw holes! Screw hole repair!
【Product PR】 "MS Insert" is a female threaded part designed to repair damaged bolt holes. An insert utilizing a special structure on the outer diameter thread is embedded into the bolt hole area for restoration. It is difficult to pull out and does not impose a load on the base material, making it suitable for installation in areas that are constantly exposed to vibrations or at the ends. Compared to conventional products such as spring-type coils or self-tapping items, it improves precision and demonstrates groundbreaking effectiveness in terms of durability. Additionally, by pre-installing it in areas where bolts are frequently attached and detached, permanent countermeasures can be achieved. 【Features】 ■ Difficult to pull out and does not impose a load on the base material ■ Ideal for permanent solutions for threaded holes ■ Can be used to reinforce and restore thread profiles ■ Enables installation at the ends → Designed with upward-facing thread profiles that attract the surrounding base material towards the center of the screw from all directions For more details, please contact us or download the catalog.
- Company：日之出水道機器 メカニカルスティッチ部
- Price：Other
Screw hole repair, damaged screw hole re-repair, aluminum screw hole repair.
Permanent measures for repairing screw holes and bolt holes!!
【Product PR】 The "MS Insert" is a female screw part designed to repair damaged bolt holes. It embeds an insert with a special structure applied to the outer diameter screw thread area into the bolt hole, restoring it. It is difficult to pull out and does not put stress on the base material, making it suitable for installation in areas constantly exposed to vibrations or at the ends. Compared to conventional products such as spring-type coils or self-tapping items, it improves precision and demonstrates groundbreaking effectiveness in terms of durability. Additionally, by pre-installing it in areas where bolts are frequently attached and detached, permanent measures can be implemented. 【Features】 ■ Difficult to pull out and does not stress the base material ■ Ideal for permanent measures for screw holes ■ Can be used to strengthen and restore screw threads ■ Enables installation at the ends → Designed with upward-facing screw threads that pull the surrounding base material toward the center of the screw from all directions For more details, please contact us or download the catalog.
- Company：日之出水道機器 メカニカルスティッチ部
- Price：Other
Aluminum manifold repair MS method aluminum casting repair casting foundry technology
This is a record of repairing cracks in an aluminum exhaust manifold! Aluminum casting repair!
【Product PR】 "MS Insert" is a female screw part designed to repair damaged bolt holes. It embeds an insert with a special structure applied to the outer diameter thread section into the bolt hole area for restoration. It is difficult to pull out and does not put stress on the base material, making it suitable for installation in areas constantly exposed to vibration or at the ends. Compared to conventional products such as spring-type coils and self-tapping items, it improves precision and demonstrates groundbreaking effects in terms of durability. Additionally, by pre-installing it in areas where bolts are frequently attached and detached, permanent measures can be implemented. 【Features】 ■ Difficult to pull out and does not stress the base material ■ Ideal for permanent measures for screw holes ■ Can be used to reinforce and restore screw threads ■ Enables installation at the ends → Designed with upward-facing threads that pull the surrounding base material towards the center of the screw from all directions For more details, please contact us or download the catalog.
- Company：日之出水道機器 メカニカルスティッチ部
- Price：Other
I will repair the stripped screw hole.
This is a record of repairing a crack in an aluminum exhaust manifold! Aluminum casting repair!
【Product PR】 The "MS Insert" is a female threaded part designed to repair damaged bolt holes. It involves embedding an insert with a special structure applied to the outer diameter thread into the bolt hole area for restoration. It is difficult to pull out and does not impose a load on the base material, making it suitable for installation in areas that are constantly exposed to vibrations or at the ends. Compared to conventional products such as spring-type coils and self-tapping items, it improves precision and demonstrates groundbreaking effects in terms of durability. Additionally, by pre-installing it in areas where bolts are frequently attached and detached, permanent measures can be implemented. 【Features】 ■ Difficult to pull out and does not impose a load on the base material ■ Ideal for permanent measures for threaded holes ■ Can be used to strengthen and restore thread profiles ■ Enables installation at the ends → The design of the upward-facing thread works to attract the surrounding base material toward the center of the screw from all directions. For more details, please contact us or download the catalog.
- Company：日之出水道機器 メカニカルスティッチ部
- Price：Other
