Anchor Method Product List and Ranking from 24 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

Anchor Method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

  1. 弘和産業 本社 Tokyo//Building materials, supplies and fixtures manufacturers
  2. スポリカ 無足場アンカー協会 Tottori//Other construction industries
  3. ＶＳＬ ＪＡＰＡＮ 本社 Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 ケーティービー Tokyo//others
  5. 4 オリエンタル白石 本社 Tokyo//General contractors and subcontractors
Go to Company Ranking

Anchor Method Product ranking

Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.

  1. Patent construction method: No scaffold anchor method スポリカ 無足場アンカー協会
  2. Ground anchor method vs. VSL residual anchor method ＶＳＬ ＪＡＰＡＮ 本社
  3. NAPP anchor method オリエンタル白石 本社
  4. Water-stopping component "packer for ground anchors" 弘和産業 本社
  5. 5 Anchor panel 弘和産業 本社

Anchor Method Product List

31～52 item / All 52 items

Displayed results
SSL Permanent Anchor Method (Expanded Hole Support Type Anchor) Type P and Type M

SSL Permanent Anchor Method (Expanded Hole Support Type Anchor) Type P and Type M

The SSL permanent anchor method consists of two techniques: the P-type and the M-type, which are both expansion pressure types.

The SSL-P type anchor body is suitable for clay and weathered rock, where the anchor fixation part is enlarged, and an anchor body is created inside the enlarged hole using grout. This method ensures the anchor's load capacity based on the bearing strength of the fixed ground in the enlarged section. The SSL-M type anchor body is suitable for soft to medium hard rock, where after enlarging the anchor fixation part, the anchor body is inserted and expanded in the enlarged section, ensuring the anchor's load capacity based on the bearing strength of the fixed ground in that section. NETIS registration number: HR-990015-A.

  • Ground foundation construction method
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Center hole type load cell 'BLWL-B-500KNSA3' rental

Center hole type load cell 'BLWL-B-500KNSA3' rental

Center hole type load cell optimal for measuring loads of earth anchors and tunnel arch supports.

The "BLWL-B-500KNSA3" is a center hole type load cell that is ideal for measuring the tension of anchors. It can measure the loads applied to newly installed earth anchors, PC anchors, and tunnel arch supports. 【Features】 ■ Center hole diameter and outer diameter compatible with Aki-Mos ■ Waterproof structure IP67 (JIS C 0920) suitable for field use ■ Optimal for load measurement of newly installed earth anchors, PC anchors, etc. *For more details, please refer to the catalog or feel free to contact us.

  • Other analytical equipment
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slope Disaster Prevention Method NM Ground Anchor Method

Slope Disaster Prevention Method NM Ground Anchor Method

Permanent anchor method using a lightweight and rust-free new material.

The NM Ground Anchor Method uses carbon fiber strands for the tensioning material, a stainless steel tendon grip for the anchor head, and a composite material reinforced with glass long fibers for the pressure plate, which provides excellent strength, lightness, and durability. It is a permanent anchor method that utilizes a new lightweight and rust-resistant material. It is ideal for anchor construction in harsh corrosive environments such as hot spring areas and volcanic regions. For more details, please download the catalog or contact us.

  • Fiber wall
  • Retaining wall
  • Pile and foundation work
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground Anchor Construction KTB Anchor Method

Ground Anchor Construction KTB Anchor Method

Ground anchor construction KTB anchor method

The KTB anchor method uses a screw-type anchor head for anchoring each strand after "wedge" anchoring, and further anchors it using a ring nut method with the screw-type anchor head, eliminating set loss and enhancing the tightening effect. 【Features】 ○ The KTB anchoring method is a wedge and nut anchoring system, which eliminates losses, allows for free re-tensioning, and enables flexible adjustment of the strand length and number on-site. ○ The tensioning materials used in this method, <SC strand> and <SC unbonded> (fully coated PC steel wire), are materials that significantly enhance the corrosion resistance performance against various corrosive environments for PC steel wire. ● For other functions and details, please contact us.

  • Retaining wall
  • Pile and foundation work
  • Joining and fastening materials
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction Method: U-Turn Removal Anchor Method

Construction Method: U-Turn Removal Anchor Method

Complete removal of PC steel strands that are underground obstacles.

The U-turn removal anchor method is the world's first load-distributing removal anchor developed for pulling out PC steel strands after the installed rock anchors have been used. By adjusting the load-bearing bodies according to the designed anchor force, the PC steel strands are turned back at the tips of each load-bearing body, allowing for uniform tension and fixation across each load-bearing body.

  • Earth retaining wall/foundation reinforcement
  • Earthworks
  • Ground foundation construction method
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Vertical Ground Anchor Method for This Project

Vertical Ground Anchor Method for This Project

Five-layer rust prevention! A highly reliable anchoring method for preventing toppling and uplift in mid- to high-rise buildings.

The "KTB Vertical Ground Anchor Method" uses fully rust-proof strands for tendons, equipped with ultra-rust prevention features, effectively functioning for seismic reinforcement, preventing toppling, and preventing uplift. It reliably transmits the designed anchor force to the ground, forming an extremely safe permanent anchor body. You can choose between two permanent anchor methods: the "KTB Load Distribution Type Permanent Anchor" and the "KTB Tension Type SC Permanent Anchor," both of which have obtained technical review certification from a Ministry of Land, Infrastructure, Transport and Tourism accredited organization. 【Features】 ■ Maintains stable pull-out resistance ■ Excellent corrosion resistance ■ Construction and economic efficiency tailored to ground conditions ■ Ease of maintenance and management ■ Permanent anchor methods with technical review certification For more details, please refer to the catalog or feel free to contact us.

  • Ground foundation construction method
  • Earthquake-resistant construction method
  • Renovation and repair methods
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Post-installed anchor method "After-construction anchor"

Post-installed anchor method "After-construction anchor"

Ideal for reinforcing concrete structures and securing hardware!

"Post-installed anchors" are a type of anchoring method that allows for the installation of hardware with a high degree of adhesion by driving bolts or rebar into a mixture of resin, hardeners, aggregates, and mortar. This method can also be performed underwater. It is mainly suitable for reinforcing concrete structures and securing hardware. Please feel free to contact us if you have any inquiries. 【Features】 ■ Metal anchors ■ Resin anchors ■ Mortar anchors *For more details, please download the PDF or feel free to contact us.

  • Concrete construction
  • Civil Engineering Method
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement of the breakwater using ground anchors.

Reinforcement of the breakwater using ground anchors.

An approach to resilient structures! Proposals from SE for earthquake and tsunami countermeasures.

In this document, SE is proposing the reinforcement of breakwaters using ground anchors as a measure against earthquakes and tsunamis in its environmental disaster prevention projects. The Great East Japan Earthquake that occurred on March 11, 2011, caused significant damage due to tsunamis. Coastal structures of breakwaters that did not anticipate external forces from tsunamis experienced major deformations such as toppling and washing away. On the other hand, breakwaters that demonstrated resilience, even when deformed by wave forces, contributed significantly to disaster reduction by delaying the arrival time of tsunamis to urban areas. Based on these experiences, breakwaters are required to have resilient structures, and our breakwater reinforcement anchor method is introduced as a reference technology in the "Guidelines for Tsunami Resistance Design of Breakwaters." [Contents] ■ Approach to "Resilient Structures" ■ Breakwater Reinforcement Anchor Method ■ SEEE Ground Anchor *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Earth retaining wall/foundation reinforcement
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
KJS Anchor Removal Method

KJS Anchor Removal Method

An extremely efficient and highly reliable construction method! Line removal is possible with mobile cranes and high-speed hydraulic jacks.

The "KJS Removal Anchor Method" uses unbonded PC steel strands, integrating the load-bearing body in a U-turn shape at the underground tip, and combines multiple units in the depth direction to create an anchor body with excellent friction resistance against the supporting ground. The anchor input force is evenly divided by the KJS tensioning device DPH and can be transmitted to the supporting ground. This method is highly efficient and reliable due to its ease of conducting suitability tests and confirmation tests before fixation, as well as the ability to remove PC steel strands using mobile cranes or high-speed hydraulic jacks. 【Features】 ■ The load acting on each load-bearing body is uniform due to the DPH (differential tensioning device). ■ The KJS jack allows for continuous execution of pre-suitability tests, confirmation tests, and subsequent anchor fixation. ■ The tendon components are few, making it economical and excellent in workability. ■ The removal efficiency is significantly improved. *For more details, please refer to the PDF materials or feel free to contact us.

  • Civil Engineering Method
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
KJS residual anchor

KJS residual anchor

Widely adopted at various construction sites! Establishing the excellence of the wedge anchoring method, which boasts superior workability!

The product is a temporary anchor with excellent workability. Named after the initials of the Kowa Jacking System, this anchor has been widely adopted in various temporary construction sites since it obtained a patent as a tensioning method in May 1989, establishing the superiority of the wedge anchoring method. There are three types of free length sections: "Partial Unbonded Type," "Poly Sleeve Type," and "Blue Hose Type." 【Features】 ■ Excellent workability as a temporary anchor ■ Establishment of the superiority of the wedge anchoring method ■ Three types of free length sections available ■ Service life: Rank B ■ Corrosion resistance level: Equivalent to Corrosion Protection Structure I *For more details, please refer to the PDF materials or feel free to contact us.

  • Temporary Construction Materials
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water-stopping component "packer for ground anchors"

Water-stopping component "packer for ground anchors"

Introducing six variations such as free packers and uneven adjustment packers!

The "Ground Anchor Packer" is a waterproofing component that accommodates various applications and anchor locations. With consideration for the environment, there are six variations available, including the "Friction Packer," which securely anchors in rock formations with many cracks, as well as the "Free Packer" and "Uneven Adjustment Packer," which are used when preventing environmental pollution is necessary. Each type is used for different applications and locations. 【Friction Packer Features】 ■ Limited injection ■ Reliable anchoring ■ Excellent durability ■ Wide range of applications ■ Easy construction management *For more details, please refer to the PDF document or feel free to contact us.

  • Waterproofing Agent
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicon chrome steel oil-tempered wire "ITW"

Silicon chrome steel oil-tempered wire "ITW"

Using an accurate control system for heating and cooling! Adjustable to any intensity according to customer requirements.

"ITW" is a high-quality spring steel wire that utilizes high-frequency induction heating technology. Due to rapid and short-time austenitization through high-frequency induction heating, fine crystal grains are obtained, and surface decarburization or oxidation of grain boundaries hardly occurs. Additionally, the synergistic effect of fine quenching structures and high-frequency short-time tempering allows for the simultaneous achievement of high strength and high toughness. [Features] - Minimal surface decarburization and oxidation of grain boundaries - Simultaneous attainment of high strength and high toughness - Adjustable to any desired strength according to customer requirements - Uniform strength is achieved throughout the entire length of the product - Variation in strength between product coils is kept to a very small level *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EPS worm wheel

EPS worm wheel

Realizing cost reduction and quality assurance through integrated production! Composite parts that transmit power with reliable technology.

The "warm wheel for EPS" has a higher bonding strength (adhesion strength) compared to injection molding. The use of resin significantly reduces noise during operation and also contributes to weight reduction. EPS achieves high energy efficiency with a clean drive system powered by an electric motor and optimal, minimal power assistance through electronic control, compared to traditional hydraulic power steering systems. 【Features】 ■ Induction heating technology is applied in the bonding process ■ The use of resin significantly reduces noise during operation ■ Contributes to weight reduction ■ Higher bonding strength compared to injection molding *For more details, please refer to the PDF materials or feel free to contact us.

  • Parts and Materials
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Netsuren "Induction Heating Equipment" High-Frequency Quenching

Netsuren "Induction Heating Equipment" High-Frequency Quenching

We provide a wide range of equipment globally, from fully automatic hardening machines for all applications in automobiles, construction machinery, and industrial machinery to simple manual hardening machines.

We design, manufacture, and engineer equipment and systems to achieve inline induction heating, energy saving, and labor saving in various industrial fields such as automotive, construction machinery, machine tools, steel, chemicals, and home appliances. As service bases, we have locations in Kanagawa and Nagoya, as well as overseas in the United States, China, Indonesia, Mexico, and South Korea, providing global support and services. We commercialize high-frequency power supply devices using SCR, IGBT, MOSFET, and SiC semiconductors, ranging from 0.5 to 400 kHz and 2.5 to 2,000 kW. Additionally, we have practical applications for CAE analysis up to metal transformation and "low (constant) deformation contour quenching technology" for gears and shafts, enabling us to provide equipment with high quality stability in heat treatment. *Induction heating (IH) technology uses green electricity as a heat source and contributes to the reduction of CO2 emissions.

  • others
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-strength spring steel wire "ITW(R)"

High-strength spring steel wire "ITW(R)"

This is a high-strength spring steel wire for high-quality cold forming using high-frequency induction heating. It contributes to weight reduction, starting with automotive suspension springs.

As a pioneer in high-strength spring steel wire for cold forming, we supply it worldwide (Production bases: Japan, China, the United States, Europe). Netsuren "ITW(R)" imparts the necessary mechanical properties to carefully selected materials through high-frequency quenching and high-frequency tempering, and conducts quality assurance over the entire length through eddy current testing for defects and monitoring of heat treatment temperatures. We manufacture in units of one coil, ensuring uniform wire diameter and strength throughout the entire length. Additionally, the variation between product coils is kept to a minimum. 【Features when formed into springs】 - Variation in shape is minimized. - While being high-strength, it allows for the formation of springs with a small D/d ratio. - Both durability and resistance to deformation are at the highest level. - High operating stress can be achieved, enabling weight reduction. - Spring manufacturing through cold forming can significantly reduce CO2 emissions compared to hot forming.

  • others
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Patent construction method "DL (Direct Line) Method"

Patent construction method "DL (Direct Line) Method"

A revolutionary construction method that allows finishing work to be done immediately after construction, enabling a reduction in construction time! Partial repairs are also possible.

The "DL (Direct Line) method" is a patented construction method that, being a dry method, prevents mold growth after installation and shortens construction time. As a modified follow-up method, it alleviates displacement and gaps caused by vibrations, and its adjustable installation makes it easy to use without the need for specialized tools. It is compatible with the interlocking method of ALC panels. 【Features】 ■ A groundbreaking method that allows for partial repairs ■ Compliant with VOC measures, containing no specific chemical substances ■ Enables immediate finishing work after installation, allowing for reduced construction time ■ Allows for partial repairs, such as substrate repairs during renovations *For more details, please refer to the related links or feel free to contact us.

  • Renovation and repair methods
  • Special Construction Method
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin diameter high-strength spring steel wire "ITW(R)"

Thin diameter high-strength spring steel wire "ITW(R)"

It is a high-strength spring steel wire with a small diameter (3.5mm to 5.0mm) for high-quality cold forming, using high-frequency induction heating.

Netsuren "ITW(R)" imparts the necessary mechanical properties to carefully selected materials through high-frequency quenching and high-frequency tempering, and conducts flaw inspection using eddy current testing along the entire length, as well as quality assurance through monitoring of heat treatment temperatures. It is manufactured on a per-coil basis, ensuring uniform wire diameter and strength throughout the entire length. Additionally, the variation between product coils is kept to a minimum.

  • others
  • Anchor Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Anchor Method

Related Categories of Anchor Method

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.