soft×ユニオンシステム - List of Manufacturers, Suppliers, Companies and Products

Structural Calculation Software Example | 5-Story Steel Building Factory

Here is an example where input and analysis were carried out smoothly without the need for any modeling!

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a 5-story steel structure factory. In a new construction project for an electrical equipment manufacturing factory, there is a 3-story steel frame building with a penthouse, featuring a large atrium on the second floor, as well as an atrium that extends from the first to the third floor for an automated warehouse. The building has a direct foundation. At the front, there are canopies at different levels of 10m and 6m, and on the first floor, there is a lower roof with varying ceiling heights, which allowed us to utilize the function for specifying dummy layers. 【Example Overview】 ■ Purpose: Factory ■ Structural Type: Steel Structure ■ Number of Floors: 5 ■ Design: Kawai Architectural Design Office (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | Steel Structure 1-Story Commercial Facility

A commercial facility consisting of three independent buildings! The large roof side is set as a dummy layer, subordinating it to the main body for analysis.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story commercial facility made of steel (S construction). All three buildings are planned as steel structures, adopting a pure moment-resisting frame to allow for flexibility and adaptability in the interior space. Building B is designed as an indoor play facility, featuring a large open space with a single span. To accommodate the large roof at different levels associated with Building B, we set the roof side as a dummy layer and conducted the analysis by subordinating it to the main structure. 【Case Study Overview】 ■ Use: Commercial facility ■ Structural Type: Steel construction (S construction) ■ Levels: 1 floor ■ Design: JSD Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | 13-Story RC Hotel

Introduction of a structural plan that supports the upper seismic wall with a 500mm thick arch wall on the first floor.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a 13-story hotel constructed with reinforced concrete (PRC). The second floor and above are planned with either two guest rooms per floor or one room, while the first floor is designed as an entrance hall with a space for light snacks, creating an open and spacious environment. By incorporating a dummy layer on the first floor and unifying nodes, we modeled diagonal members to achieve the intended design. 【Example Overview】 ■ Purpose: Hotel ■ Structural Type: Reinforced Concrete (PRC) ■ Number of Floors: 13 ■ Design: JSD Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ 4-Story Elementary School Building with Steel and Reinforced Concrete Construction

Using dummy layers, node unification, node movement, etc.! Model almost as it is in reality and design with consistent calculations.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for a four-story elementary school building made of steel and reinforced concrete. This is a reconstruction plan for an elementary school building located along the Sai River in Kanazawa City, Ishikawa Prefecture, featuring an RC structure with a swimming pool on the roof in a heavy snowfall area. The U-shaped floor plan is designed to avoid the existing gymnasium and takes into account the impact of rain and snow on the building throughout the year in the Hokuriku climate. The floor plan is structured to avoid structural division of the building through expansion. [Example Overview] - Purpose: Elementary school building - Structural Type: Steel and reinforced concrete - Number of Floors: 4 - Design: bananaLab (Kyoto Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Examples │ Steel Structure + Reinforced Concrete Structure + Steel Reinforced Concrete Structure + Wooden Structure Tenant Building

Out of the 12 floors above ground, the upper 4 floors are planned to be wooden! Above 40 meters, an open wooden and timber space expands.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for tenant buildings constructed with S, RC, SRC, and W structures. This building is a tenant building with 1 basement floor and 12 above-ground floors, featuring a mixed structure of elevations and floor plans. The main feature of this project is that out of the 12 above-ground floors, the upper 4 floors are designed as wooden structures, creating an open wooden and wood-based space above 40 meters. 【Example Overview】 ■ Use: Tenant building ■ Structural type: S + RC + SRC + W ■ Levels: 12 above-ground floors, 1 basement floor ■ Design: Shimizu Structural Planning Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | Steel Structure 1-Story Factory

A single-story factory with a gently sloping gable roof! A structure that can withstand expansion.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for steel frame factories. This building is a single-story factory with a gable roof that has a gentle slope of 3/100, measuring 7m x 10 spans in the X direction and 17m x 2 spans in the Y direction. The columns are made of cold-formed square steel tubes, and the beams are made of H-shaped steel, creating a frame structure in both the X and Y directions. The building serves as a temporary storage space for construction steel materials and processed building frameworks. 【Case Study Overview】 ■ Purpose: Factory ■ Structural Type: Steel Frame ■ Number of Floors: 1 ■ Design: Komura Architectural Office (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | 29-Story CFT Apartment Building

A 29-story, 110-meter tall CFT-constructed apartment building! Planned as a hybrid vibration control structure.

We would like to introduce an example of the consistent structural calculation software 'Super Build/SS7' for CFT-constructed apartment buildings. This project is a 29-story, 110-meter tall CFT apartment building, designed as a hybrid damping structure with viscous damping walls (VDW) and damping columns as damping members. The structural form is a pure frame structure, with viscous damping walls placed in the common areas of the standard floor and steel damping columns located within some of the unit boundary walls, designed to absorb energy from wind and earthquakes, thereby improving livability and seismic resistance. 【Example Overview】 ■ Use: Apartment building ■ Structural Type: CFT ■ Stories: 29 ■ Design: Kamikawachi Design Co., Ltd. (Saitama Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ Steel Structure + Part CLT Structure 3-Story Commercial Facility

An example of smoothly advancing foundation design by modeling the entire structure down to the foundation!

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a three-story commercial facility constructed with steel (S) and partially cross-laminated timber (CLT). This building primarily serves as a commercial facility for the exhibition and sale of automobiles, with an attached automotive maintenance workshop in the back. The facade features slender post columns, and the main seismic elements are designed as a frame structure using 500mm square steel pipe columns set back from the facade, ensuring that thick members do not appear on the outer perimeter. 【Case Study Overview】 ■ Use: Commercial facility ■ Structural Type: Steel (S) + Partially Cross-Laminated Timber (CLT) ■ Stories: 3 ■ Design: Hiraiwa Structural Planning LLC (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Examples │ Steel Structure + Reinforced Concrete Structure University Facilities

The upper part of the building is planned with a pure frame structure made of steel, and the foundation is designed with pile foundations as an example.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' for university facilities constructed with a combination of steel (S) and reinforced concrete (RC). This building is a three-story above ground (S) plus one basement (RC) university facility that takes advantage of the sloped and stepped construction site. Due to the slope and steps of the construction site, part of the structure is underground, and the underground portion is planned as a reinforced concrete structure with seismic walls in a frame structure. 【Example Overview】 ■ Use: University Facility ■ Structural Type: S + RC ■ Levels: 3 stories above ground, 1 basement (4 stories above ground structurally) ■ Design: Sanjugo Architectural Institute Co., Ltd. (Toyama Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | S-Structure 10-Story Above Ground, 1-Story Below Ground Office Building

Proposal for seismic-resistant structure! The result is a frame structure, planned as a building with four columns.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' used for a 10-story above-ground and 1-story underground office building made of steel. Due to the constraints of the site shape, the floor plan was designed with a main structure that bears seismic forces measuring 6.5m x 10.7m, with a staircase and other structures that do not bear seismic forces measuring 2.7m x 5.5m attached to it. Additionally, since the underground first floor was created within a pit, it was not included in the modeling as a floor; instead, it was treated as a foundation beam with an upper added layer, and piping and other installations were placed in the added layer. 【Example Overview】 ■ Use: Office Building ■ Structural Type: Steel ■ Levels: 10 stories above ground, 1 story underground ■ Design: Structural Form Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ 5-Story Steel Office Building

A plan where the entire structure is tilted diagonally! The office area has a parallelogram layout with dimensions of 18.5m in both the X and Y directions.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a 5-story steel-framed office building. This building is planned for a company headquarters located near the Okazaki Interchange in Okazaki City, Aichi Prefecture. The building faces a main road and features a gate-type frame over 15 meters high that covers the entire office area, along with an object that penetrates all floors, creating a symbolic facade that catches the eye when passing by. 【Case Study Overview】 ■ Use: Office ■ Structural Type: Steel Frame ■ Number of Floors: 5 ■ Design: Morimoto Structural Design Office, Inc. (Aichi Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | S-Type 2-Story Certified Children's Center

A design that incorporates wall braces to suppress deformation! Braces are also arranged to reduce eccentricity.

We would like to introduce an example of the consistent structural calculation software 'Super Build/SS7' used for a two-story certified children's facility made of steel. This project involves a two-story steel structure with a gable roof, where the key design points are how to handle wind pressure on the large beams spanning both sides of the atrium and how to address buckling. For the wind pressure and buckling restraint of the large beams on the atrium sides, a triangular frame (three layers) was incorporated under the roof, utilizing node unification between the three-layer and two-layer frames to create a structure that serves both wind pressure and buckling restraint. 【Example Overview】 ■ Purpose: Certified Children's Facility ■ Structural Type: Steel ■ Number of Stories: 2 ■ Design: Yoshio Design Co., Ltd. (Kanagawa Prefecture) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example | RC Structure 12-Story Above Ground, 1-Story Below Ground Office Building

Can accommodate irregular shapes! By performing horizontal load capacity calculations, we design results that are close to the initial image.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 12-story above-ground and 1-story below-ground office building made of reinforced concrete (RC). The design utilizes the irregular shape of the site, maintaining a 500mm setback, which directly translates into the building's floor plan. Structurally, it features two volumes that rise and connect in between, creating a cohesive structural plan. Additionally, columns are placed in the center of spans where there are no existing piles, and these columns are connected by cantilever beams, forming a three-dimensional framework with orthogonal columns and a moment-resisting frame. [Case Study Overview] ■ Use: Office Building ■ Structural Type: RC (PRC) ■ Levels: 12 above ground, 1 below ground ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ 19-Story Office Building with RC and SRC Construction

Planning a super high-rise using PC construction on a small site! Introducing a memorable project.

We would like to introduce an example of the integrated structural calculation software 'Super Build/SS7' used for a 19-story office building constructed with RC and SRC structures. Initially, a pentagonal office building was planned on a small site to maximize the sky ratio using PCa and PC. Due to the scale, performance evaluation was necessary, and ultimately, we aimed for time history response analysis. From the perspective of data linkage, we consistently utilized tools related to the foundation, from the creation of the announcement wave to response analysis. 【Example Overview】 ■ Use: Office Building ■ Structural Type: RC + SRC (PCa + PC) ■ Stories: 19 ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Structural Calculation Software Example │ 5-Story Steel Structure Factory (with Internal Three-Dimensional Warehouse)

Planned with a pure frame structure instead of a brace structure! An example where the excavation depth was planned to be as shallow as possible.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 5-story steel factory building. This property features two three-dimensional warehouses inside, with the fourth floor having a very high ceiling of 8.5 meters, and a specification that includes equipment platforms in the middle of the floor. Additionally, the areas where equipment is placed and the three-dimensional warehouse section create a void space, resulting in many locations where the rigid floor assumption does not hold. 【Case Study Overview】 ■ Purpose: Factory ■ Structural Type: Steel ■ Number of Floors: 5 ■ Design: Nakano Fudo Construction Co., Ltd. (Tokyo) *For more details, please download the PDF or feel free to contact us.

Company：ユニオンシステム
Price：Other

Architectural Design Software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

soft×ユニオンシステム - List of Manufacturers, Suppliers, Companies and Products

soft Product List

Structural Calculation Software Example | 5-Story Steel Building Factory

Structural Calculation Software Example | Steel Structure 1-Story Commercial Facility

Structural Calculation Software Example | 13-Story RC Hotel

Structural Calculation Software Example │ 4-Story Elementary School Building with Steel and Reinforced Concrete Construction

Structural Calculation Software Examples │ Steel Structure + Reinforced Concrete Structure + Steel Reinforced Concrete Structure + Wooden Structure Tenant Building

Structural Calculation Software Example | Steel Structure 1-Story Factory

Structural Calculation Software Example | 29-Story CFT Apartment Building

Structural Calculation Software Example │ Steel Structure + Part CLT Structure 3-Story Commercial Facility

Structural Calculation Software Examples │ Steel Structure + Reinforced Concrete Structure University Facilities

Structural Calculation Software Example | S-Structure 10-Story Above Ground, 1-Story Below Ground Office Building

Structural Calculation Software Example │ 5-Story Steel Office Building

Structural Calculation Software Example | S-Type 2-Story Certified Children's Center

Structural Calculation Software Example | RC Structure 12-Story Above Ground, 1-Story Below Ground Office Building

Structural Calculation Software Example │ 19-Story Office Building with RC and SRC Construction

Structural Calculation Software Example │ 5-Story Steel Structure Factory (with Internal Three-Dimensional Warehouse)

Search Keywords Related to soft