pump Product List and Ranking from 337 Manufacturers, Suppliers and Companies

Grease supply dedicated filling pump [KGP series]

The one for pails is manual, while the one for drums is electric. The drum version allows for easy drum replacement without a follower plate.

When replenishing grease in the grease pump tank, always use a dedicated filling pump for grease. If you refill grease from the top of the tank, it can cause air entrapment and contamination with foreign substances, leading to potential problems. The filling pump can be easily attached and detached from the grease pump's filling port using a quick coupling. *Generally, this is limited to our products, but we also accept adapters for pumps from other manufacturers. For drum cans, we use a stirring blade method without a follower plate. This allows for minimal residual grease and makes it easy to replace the drum can.

Company：広和
Price：Other

Transport machinery
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quick Dry Mortar "Kanmoru Quick"

Quick-setting, quick-drying type! It accelerates the hydration reaction of cement with a special formulation to develop strength.

"Dry Molquick" is a premixed mortar that achieves approximately 10N/mm² in 3 hours and has long-term strength comparable to cement mortar. It is easy to use; just add water. It is suitable for urgent construction projects. It can be used for general mortar work such as concrete repairs, column filling, and indoor and outdoor floors and walls. [Features] ■ Achieves approximately 10N/mm² in 3 hours ■ Long-term strength comparable to cement mortar ■ Suitable for urgent construction projects *For more details, please refer to the PDF materials or feel free to contact us.

Company：陽光物産
Price：Other

Mortar and plaster materials
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We have started a rental service for water pumps!

Would you like to rent a submersible pump along with REPCS materials? We have a wide range of pumping equipment tailored to meet your needs and piping routes.

We are pleased to announce that underwater pumps are now available for rent along with REPCS materials. (REPCS is a temporary piping rental system that considers the environment by minimizing waste.) Please feel free to use this service during droughts or when replacing installations.

Company：明和工業
Price：Other

Piping materials (copper pipes, cast iron pipes)
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Custom Hydraulic Jack Manufacturing - Equipped with Hydro Post Air-Type Hydraulic Pump

Custom-made products tailored to the site! Equipped with 50T/100T hydraulic pump (modified)

Yamashita Machine handles a custom-made hydraulic jack product called "50T/100T Hydro Post Air Type Hydraulic Pump Equipped (Modified)." We manufacture custom products tailored to the specific needs of the site. Upon request, we develop products that are more efficient and user-friendly for the site, assisting your company in improving efficiency, reducing labor, and cutting costs. For more details, please refer to our catalog or feel free to contact us.

Company：山下マシーン
Price：Other

Work tools
Prime movers, torque converters, hydraulic equipment, generators
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The tool most needed on site: Various manual hydraulic pumps.

Yamashita Machine provides the tools that are most needed on-site.

Yamashita Machine provides "various manual hydraulic pumps" as the tools most needed on site. Our company also manufactures custom products tailored to the specific needs of the site. Upon request, we develop products that are more efficient and user-friendly for the site, assisting your company in improving efficiency, reducing labor, and cutting costs. 【Features】 ■ A lineup that meets the needs of various sites, from ultra-lightweight models to heavy-use options ■ Supports the site with a variety of products, including electric pumps and high-efficiency air-driven hydraulic pumps For more details, please refer to the catalog or feel free to contact us.

Company：山下マシーン
Price：Other

Prime movers, torque converters, hydraulic equipment, generators
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The tool most needed on site: self-propelled bolt tightening machine (board pressing machine)

Yamashita Machine provides the tools that are most needed on-site.

Yamashita Machine provides the "self-propelled bolt tightening machine (board press machine)" as the tool most needed on site. We also manufacture custom products tailored to the specific needs of the site. Upon request, we develop products that are more efficient and user-friendly for the site, assisting your company in improving efficiency, reducing labor, and cutting costs. For more details, please refer to our catalog or feel free to contact us.

Company：山下マシーン
Price：Other

Prime movers, torque converters, hydraulic equipment, generators
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Source Heat Pump "ASPAC System"

Flexibly adapts to various buildings! High-efficiency air conditioning system with integrated indoor and outdoor units!

The "ASPAC System" is an air conditioning system that utilizes an air-source heat pump unit, which integrates both the outdoor and indoor units. Since the outdoor and indoor units are combined, there is no need for outdoor unit installation, refrigerant piping work, or refrigerant charging on-site. By taking in outside air through the intake and exhaust vents on the exterior wall, it allows for air conditioning and energy-saving cooling with fresh outside air while providing ventilation. We offer ceiling-mounted wall-through units and floor-mounted wall-through units tailored to the building's purpose. 【Features】 ■ Completely individual air conditioning system ■ Precisely responds to fluctuations in heating and cooling loads on a room-by-room basis ■ Energy-efficient air conditioning system ■ No need for a machine room or shaft due to the integrated indoor and outdoor units ■ Long lifespan due to manufacturer maintenance *For more details, please refer to the PDF materials or feel free to contact us.

Company：NIPPON PMAC Co., Ltd.
Price：Other

Heating and cooling equipment and facilities
others
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Column] The Difference Between Grinding and Polishing

Stainless steel columns from Taiwa Industry, experts in stainless steel processing! Introducing polishing.

Generally, when thinking of the surface of stainless steel, one might imagine a silvery-white appearance like that of silver or aluminum. However, depending on the processing method, stainless steel can also be finished to a shiny, beautiful mirror (mirror finish) that reflects one's face. There are various methods such as applying liquids or powders, covering with a thin film, or immersing in chemical baths, and the correct answer is that any of these processing methods can achieve a mirror finish. So, what are the differences among them? For more details, please refer to the related links below. *The detailed content of the column can be viewed through the related links. For more information, please feel free to contact us.*

Company：太華工業
Price：Other

others
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

<Demo unit available> Chemical metering pump 'Qdos Series'

Ideal for precise delivery of liquid medications and additives! Significant cost reduction is possible, including a review of the front and rear equipment!

The Qdos series is a chemical dosing pump that enables accurate and reproducible dispensing of fluids with various viscosities, thanks to its unique design featuring a patented ReNu pump head. It is ideal for environments where precise dosing is required, such as pH adjustment in water treatment and the addition of coagulants. It also has a proven track record in the injection of chemical additives for electroplating. The pump allows for extremely accurate fluid delivery, unaffected by suction conditions. The Qdos pump reduces the need for auxiliary devices before and after the pump, promising significant cost savings. 【Features】 - Maintains the set flow rate even with changes in suction pressure. A reliable dosing pump. - Easy-to-use interface for straightforward operation. - Reduces chemical costs. - Safe maintenance. - Pump replacement in seconds (maintenance without tools). - Easy maintenance. *For more details, please refer to the catalog or feel free to contact us.

Company：Watson-Marlow（ワトソンマーロー）東京本社、大阪支社
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

<New Product / Demo Unit Available> Sign Pump Series Certa

In response to customer requests, we now support CIP and SIP! Introducing the new wave of sign pumps, "Certa."

A new member has joined the lineup of sign pumps: Certa. Certa maintains the characteristics of sign pumps that do not break solid materials and can transfer high-viscosity liquids, while also accommodating the highly requested CIP in the food industry. The number of parts has been significantly reduced! It is now possible to perform CIP in a short time without any dead space. If you are looking for CIP and SIP compatibility, choose "Certa." If you require disassembly and cleaning capability, opt for the "Sign Pump MR Series." From now on, you can choose a sign pump that suits your specific application. *Please also take a look at the Sign Pump MR (MasoSine) series.

Company：Watson-Marlow（ワトソンマーロー）東京本社、大阪支社
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

<Demo unit available> Bredel Hose Pump

The "Bredel" hose pump is suitable for slurry and harsh environments. It is ideal for the transfer of cement, ceramics, paint, and sludge!

Bredel hose pumps have high abrasion resistance and can transport slurries that are difficult to transfer with other pumps. They can also handle high-pressure transfers of up to 1.6 MPa. Today, over 100,000 Bredel hose pumps are in operation worldwide. With an operating pressure of 1.6 MPa and flow rates of up to approximately 100 m³/hr, they are suitable for demanding applications across a wide range of industries. Chemicals: Acids, alkalis Wastewater treatment: Lime, kalic, sodium hypochlorite, ferric chloride, and precipitates Paints & pigments: Feed for dispersion mills, pigments, and latex Pulp & paper: Dyes, sizing agents, yield enhancers, titanium dioxide Mining: Tailings slurry, precipitates, and reagents Ceramics & glass: Powders and clays for ceramics, bricks, and tiles Construction: Cement, coatings, sprayed concrete, colorants, and aggregates Printing & packaging: Varnishes, inks, coatings, and adhesives Food & beverage: CIP applications, wine, beer, dairy products, baking, seasonings, and additives Textiles: Fibers, dyes, acids OEM: Various pumps available for system suppliers For model-specific data, please download the attached data sheet.

Company：Watson-Marlow（ワトソンマーロー）東京本社、大阪支社
Price：Other

pump
Concrete Machinery
Reinforced concrete construction
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mechanical rebar joint 【EG joint (butt joint type)】

Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.

The 【EG Joint (Splice Type)】 is a mechanical rebar joint that connects rebar ends joined by friction welding with screws, using a coupler and tightened with a lock nut. It does not require special skills, allowing for a reduction in construction time. Since it is groutless, temperature management is unnecessary, and there is no industrial waste produced. 〇 Obtained the performance evaluation standard for rebar joints【Grade A】 in the 2007 edition of the Structural Technical Standards for Buildings (Evaluation Number by the Japan Architectural Center: BCJ Evaluation-RC 0001-04) 〇 Confirmed the performance of the joint alone as【Grade SA】 in the "Guidelines for Rebar Anchorage and Joints [2007 Edition]" by the Japan Society of Civil Engineers *For more details, please contact us. 【Features】 ○ Sizes D13 to D51, Steel Grades SD295 to SD490 ○ No grout material needed; just tighten with a torque wrench ○ Easy construction enables a reduction in construction time ○ Compact and fits well ○ High reliability as all stress transfer occurs through steel 〇 Can be used as a lightning rod conductor for RC structures 〇 No industrial waste produced as no grout material is used 〇 No ultrasonic inspection required For more information, please contact us or download the catalog.

Company：合同製鐡株式会社
Price：Other

others
grout
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Airless Set: 'S-Flow' & '40C50 Pump'

High-efficiency pump that maximizes energy efficiency, suitable for 1.5L/min! Made of stainless steel and compatible with a wide range of liquids!

The "AIRLESS 40C50" is a paint pump suitable for airless applications, designed to be economical with low air consumption. It is a high-efficiency pump that maximizes energy efficiency and is suitable for 1.5L per minute. Additionally, it features a dead zone-free design for quick cleaning and product switching. 【Features】 ■ Thick suction and high compression ratio ■ All wetted parts are made of stainless steel ■ Simple design significantly reduces the number of parts *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

others
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-viscosity pump "Rexon Pump"

Easy maintenance with a minimal component configuration! For automobiles, civil engineering machinery, and solar energy!

The "Lexon Pump" is an air-driven pump for high-viscosity materials in a single component. With continuous high discharge volume, painting time is reduced compared to cartridge-based painting. It is also easy to use, just like cartridge-based painting. It has a simple structure with few components, making maintenance easy. 【Features】 ■Improves productivity ■Suitable for high-viscosity materials up to 100 centipoise ■Modular design ■Simple structure ■Cost reduction *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

others
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Paint circulation pump "FLOWMAX piston pump"

Maintenance-free! Expert in paint dispensing solutions.

The "FLOWMAX Piston Pump" features a stylish design and a low component count reverse system that allows for quick switching, making it a medium-output, low-pressure paint circulation pump that supplies a consistent material for painting applications. A turbo air motor for 24-hour daily operation is also available. This air motor comes in three sizes and optimizes air consumption while providing product supply at the correct pressure required for high-quality finishes. 【Features】 ■ Designed for sensitive materials and abrasives ■ Extended service life ■ Leak-free: bellows design ■ Easy to use: no lubrication required ■ Extended service life: single lip GT seal that offsets wear *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

others
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated double diaphragm pump '01D140'

Pump designed for air spray applications for fluid transport at a 1:1 ratio and small-scale circulation systems.

The "01D140" is a pneumatic double diaphragm pump designed for fluid transport and small-scale circulation systems equipped with multiple guns. Thanks to its compact design, integration into painting systems is very easy. Its advanced structure ensures high-speed flushing, and the pump functions perfectly in high-speed color change systems. 【Features】 ■ High performance ■ Compact design ■ Suitable for high-frequency color changes ■ High durability and reliability ■ Reduces lifetime costs *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating Pump "30C25 Air Mix"

A design that minimizes pulsation for excellent finishing! Different air motors prevent pump frosting.

The "30C25 Air Mix" is a compact paint pump suitable for transporting a variety of types of paints and materials, ranging from low to medium viscosity. It features an optimized volume fluid section to achieve minimal material loss and facilitate quick color changes. We offer various options to meet all customer requirements. 【Features】 ■ Different air motors prevent pump frosting ■ Design minimizes pulsation for excellent finish ■ Large foot valve for handling medium viscosity materials ■ Easy and rotatable outlet fitting for quick maintenance ■ Air leak monitoring for high-speed control *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating Pump "35C50 Air Mix"

A simple design with a small number of parts considering maintainability! Introducing the air mix pump.

The "35C50 Air Mix" is a paint pump equipped with a very powerful air motor. It can supply paint pressure to air mix or airless S-flow guns up to a maximum. With minimized low air consumption, it can pump paint viscosities from 20 cps to 5,000 cps. 【Features】 ■ Balanced air motor for quiet and stable supply ■ Design without dead zones for quick color changes ■ Capable of starting and cleaning at low pressure (0.6 bar) ■ Simple rotary joint to fit various configurations ■ Integrated cartridge without dead zones *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric Pump for Paint Circulation 'ePCS'

Powerful yet compact design, highly efficient and dynamic! High precision and stable paint delivery.

The "ePCS" is a product that provides stable high-precision pressure and paint flow despite its small installation area. It maximizes the power and characteristics of the electric motor. The system has different cams for each piston. In addition to very stable pressure and flow, it optimizes the flow of paint. Furthermore, there are no springs in the valves, allowing for a low-shear circulation of the paint. 【Features】 ■ Two separate cams provide stable pressure and flow ■ High efficiency and low energy consumption ■ Fast response time optimizes paint pressure levels ■ Compact design suitable for small installation areas in paint kitchens ■ Leak indicator allows operation until breakdown *For more details, please refer to the PDF document or feel free to contact us.

Company：サメス
Price：Other

Work tools
others
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Diaphragm Pump "Prima 01D100"

Extremely durable and long-lasting! A double-structured diaphragm pump with a 1:1 pump ratio.

The "Prima 01D100" is a suitable solution for supplying spray systems in the wood, metal, and plastic industries. This paint pump is compatible with solvent or water-based materials and is also compatible with electrostatic air spray equipment. There is a version for abrasive materials such as glaze applications, equipped with a PU diaphragm, ensuring quick priming, consistent pulsation-free application, and ease of operation due to the pump's design. 【Features】 ■ Simple and efficient ■ Minimizes pulsation to the extreme with Leg Pro ■ Highly durable and long-lasting ■ User-friendly ■ Usable for both manual and automatic spraying in the general industrial market *For more details, please refer to the PDF materials or feel free to contact us.

Company：サメス
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wood Vacuum Pressure Impregnation Device "SKB Type"

Eliminate wasted injection liquid and time! A wood vacuum impregnation device with easy operation via a touch panel.

The "SKB type" wood vacuum pressure impregnation device exhibits the best performance for injecting preservatives, insecticides, dyes, and more into wood. Pressure is stopped once the pre-set flow rate is reached. Since the pressurization process can be configured based on both flow rate and pressurization time, there is no waste of liquid or time. You can choose between the "liquid pressure method," which uses a pressure pump for pressurization with the injected liquid, and the "air pressure method," which uses compressed air from a compressor. We will design according to the customer's requirements. We also offer the "KY type" insizing machine as a partner for the impregnation device. 【Features】 ■ Eliminates liquid waste with flow meter settings ■ Choice of pressurization methods ■ Easy operation with a touch panel ■ Accommodates various needs *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：ヤスジマ
Price：Other

others
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wood Vacuum and Pressure Impregnation Device (Wet Type)

Injecting chemicals to add value to wood! Possible treatments include anti-corrosion, anti-termite, fireproofing, and flame retardant!

In the wood vacuum and pressure impregnation device, air inside the wood is removed, and a chemical solution is injected into that space to treat the wood. There are two treatment methods: one is the liquid pressure method, where the impregnation tank is filled with the chemical solution and pressurized using a pump, and the other is the air pressure method, which uses a compressor to pressurize with air. 【Features】 ■ Since the injection amount can be managed by setting the flow meter, there is no waste of the chemical solution due to excessive injection. (Applicable only to the liquid pressure method) ■ Options can be added to meet customer needs and the characteristics of the chemical solution, such as heating the solution and a piping cleaning system. *For more details, please feel free to contact us.

Company：ヤスジマ
Price：Other

others
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

pump Product List and Ranking from 337 Manufacturers, Suppliers and Companies | IPROS

pump Manufacturer, Suppliers and Company Rankings

pump Product ranking