pump Product List and Ranking from 337 Manufacturers, Suppliers and Companies

Case Study: Visualization of Experimental Wastewater from Research Institutions

Changed the drainage of 57 facilities to a pressurized pump system! Connected to each experimental equipment and routed through overhead piping to the treatment tank.

We have achieved "visualization" that complies with the "Water Pollution Prevention Act" by directly connecting the drainage equipment that previously used buried pipes or submersible pumps to the experimental device or drainage pipe with the Sokuhaikun 2, allowing for pressurized drainage. The pump can be installed near the equipment, operates immediately upon inflow, and stops when inflow ends, eliminating the need for a drainage pit and making visual inspections and responses to potential leaks much easier. 【Features】 ■ No need for a drainage pit ■ The pump is made of cast iron, making it robust and quiet ■ Being tankless, there is almost no foul odor from stagnant water ■ Highly reliable automatic operation with a dedicated control panel and pneumatic switch ■ Can be installed in a short period and at low cost *For more details, please contact us or download the catalog to view.

Company：橋本産業
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example: New tenant with many drainage fixtures

Adopted in a stylish café where you can enjoy freshly brewed coffee made by yourself! Instant drainage for many sinks that cannot be sloped with the Ikai-kun 2.

This is a shop where you can experience delicious "freshly brewed" coffee by setting up numerous sinks for each seating area. Since the sink drainage volume is small and cannot be sloped, we installed the Instant Drain 2 in the store's operational space, allowing for stylish café drainage through centralized pumping. Regular cleaning and maintenance are also conducted. 【Features】 ■ No need for a drainage pit ■ The pump is made of cast iron, making it sturdy and quiet ■ Tankless design minimizes odors from stagnant water ■ Capable of draining multiple fixtures with one unit (drainage load of 10-15 units) ■ Can be installed in a short period and at low cost *For more details, please contact us or download the catalog to view.

Company：橋本産業
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Floor-mounted tankless drainage pressure pump "Sokuhai-kun 2 80A type"

Even without a drainage slope, pumping is possible without a drainage pit! This is a pump that can be directly connected to drainage pipes for toilets, sinks, and more.

Hashimoto Sangyo's "Sokuhai-kun 2" is a floor-mounted, tankless wastewater pressure pump that is ideal for residential homes, stores, clinics, stations, factories, research facilities, and construction sites where drainage gradients cannot be achieved, where the drainage outlet is far away, or where space is limited. A semi-unit type for wastewater, model 80A, which is easy to install and maintain, will soon be available. 【Features of Model 80A】 - Semi-unit type that is easy to install and maintain - Wastewater inlet 80A, general drainage inlet 40A, discharge outlet 50A, vent 40A - Made of cast iron, robust, quiet (41-44 dBA), and hygienic - Single-phase 100V 0.4kW and three-phase 200V 0.75kW models - A variety of special accessories such as wastewater check valves and alternating operation panels are available - Regular inspection contracts and service contracts ensure peace of mind for maintenance *For more details, please contact us or download the PDF to view.

Company：橋本産業
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case Study of the "Water Quality Pollution Prevention Act": Small Instant Drainage Pump "Sokuhai-kun 2"

Case study of the introduction of "visualization" of research wastewater under the Revised Water Quality Pollution Prevention Act!

The "Water Quality Pollution Prevention Act" has been amended to require the visualization of wastewater treatment facilities mixed with chemicals to prevent the leakage of harmful substances. The "Sokuhai-kun II" is a compact immediate discharge pump that has been introduced for the visualization of research wastewater treatment facilities. (Note: Research wastewater refers to rinsing water from experimental equipment after the 3rd or 4th use.) By pumping up the wastewater from the research wastewater sink, we have upgraded the system from a naturally flowing underground buried drainage pipe method to an overhead piping method, achieving the "visualization" of the wastewater treatment facility. We also offer regular maintenance contracts. [Features] ■ Pumping up research wastewater for "visualization" ■ Regular maintenance contracts are also available *For more details, please refer to the PDF document or feel free to contact us.

Company：橋本産業
Price：Other

Drainage and ventilation equipment
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pump Tech

Solve all the problems of pumps that cannot be resolved! Pump specialists will diagnose with care!

"Pump Tech" is a technical center for pumps established by Hashimoto Sangyo, which has been in operation for 10 years. Utilizing the technology, experience, and know-how cultivated over many years as a comprehensive trading company for pumps, our pump professionals are ready to respond to various inquiries, from investigation and diagnosis to maintenance and inspection. If you have concerns such as "the pump is noisy," "I want to change to a direct pressure pump," "the water flow is poor," or "red water is coming out," please contact us immediately. [Features] ■ Detailed diagnosis of any pump ■ Pump doctors available for assistance ■ Proven track record of 700,000 units as a testament to our reliability ■ 60 years alongside pumps *For more details, please refer to the PDF materials or feel free to contact us.

Company：橋本産業
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low Concentration Slurry Pump "SPP Type"

Low concentration general slurry pump! Can be used for industrial wastewater treatment.

The "SPP type" is a low-concentration slurry pump designed for industrial wastewater treatment with low-concentration general slurries. Due to its simple structure, it has fewer parts, making assembly and disassembly easy. The shaft sealing part is standard with a gland packing type, but it can also be changed to a mechanical seal type. 【Features】 ■ Simple structure ■ Fewer parts ■ Easy assembly and disassembly ■ Can be changed to a mechanical seal type *For more details, please refer to the PDF document or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-stage high-pressure slurry pump "SPF type (inverse type)"

For ultra-high pressure and long-distance transport of general slurry! Can be changed to a mechanical seal type!

The "SPF Type (Inverse Type)" is a two-stage high-pressure slurry pump. By adopting a two-stage impeller, it achieves the highest level of discharge pressure among this type of pump. Additionally, due to the inverse shape of the suction inlet, it maintains low pressure at the shaft sealing area while providing high-pressure discharge, enhancing sealing performance. The shaft sealing area comes standard with a gland packing type, but it can also be changed to a mechanical seal type. 【Features】 ■ Adopts a two-stage impeller ■ Inverse shape of the suction inlet ■ Can be changed to a mechanical seal type *For more details, please refer to the PDF document or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery and Sludge Pump "SPD2 Type"

High-efficiency slurry pumps for shallow depths! They excel in wear resistance against high-concentration sludge.

The "SPD2 type" is a pump for transporting and discharging mud, designed to accommodate deep and long-distance excavation work using the mud-water shield method. Based on years of manufacturing experience and design technology, it excels in the passage of gravel generated particularly in underground tunnel construction, as well as in wear resistance against high-concentration mud and the pressure resistance and lifespan of the shaft seal. This product is suitable for shaft depths of 35 and 40 meters or less. 【Features】 ■ Accommodates deep and long-distance excavation work ■ Excellent wear resistance ■ Suitable for shaft depths of 35 and 40 meters or less *For more details, please refer to the PDF materials or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery and Sludge Pump "SPD5 Type"

Corresponds to a shaft depth of 45 to 60 meters! High-efficiency slurry pump for medium depth.

The "SPD5 type" is a pump for the transportation and discharge of sludge for medium to deep depths. It is designed to accommodate deep and long-distance excavation work using the mud water shield method. Based on years of manufacturing experience and design technology, it excels in the passage of gravel generated particularly in underground tunnel construction, as well as in wear resistance against high-concentration sludge and the pressure resistance and lifespan of the shaft seal. This product is suitable for shaft depths of 45 to 60 meters. 【Features】 ■ Accommodates deep and long-distance excavation work ■ Excellent wear resistance ■ Suitable for shaft depths of 45 to 60 meters *For more details, please refer to the PDF materials or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery and Sludge Pump "SPD6 Type"

High-efficiency sludge transport and discharge pump for deep depths! Compatible with shaft depths of 60 to 100 meters!

The "SPD6 type" is a pump for sending and discharging sludge designed for deep excavation. It is suitable for deep and long-distance excavation work using the slurry shield method. Based on years of manufacturing experience and design technology, it excels in the passage of gravel generated particularly in underground tunnel construction, as well as in wear resistance against high-concentration sludge and the pressure resistance and lifespan of the shaft seal. Additionally, this product is compatible with shaft depths of 60 to 100 meters. 【Features】 ■ Supports deep and long-distance excavation work ■ Excellent wear resistance ■ Compatible with shaft depths of 60 to 100 meters *For more details, please refer to the PDF document or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw-type suction vortex pump "HSP type"

Many achievements for wastewater treatment plants, sewage treatment plants, etc. Pumps for sewage and sludge!

The "HSP type" is a single-blade impeller pump for wastewater and sludge, which has been improved from the three-dimensional impeller of our sister model, the spiral mixed flow pump SPW (FSP) type. The shaft sealing structure offers a variety of options and proven performance depending on the application. We also offer "HSPM type" and "HSPH type" with discharge diameters ranging from 100 to 400 mm. 【Features】 ■ A product improved from the three-dimensional impeller of the spiral mixed flow pump SPW (FSP) type ■ Single-blade impeller ■ For wastewater and sludge ■ Proven performance in many applications, including sewage treatment plants and sewage disposal facilities *For more details, please refer to the PDF materials or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multistage spiral pump "MB type"

It is also possible to transport high-temperature water at 120℃ (up to 150℃ depending on conditions)! A lift of up to 350m can be achieved.

The "MB type" is a multi-stage vortex pump designed for direct connection to a 2-pole motor, suitable for small clean water applications. This product can achieve a lift of up to 350m. Additionally, two types of impellers are designed for each diameter to match the applicable flow rate, enabling high-efficiency operation over a wide range. Not only does it satisfy high lift requirements, but it can also transport hot water at temperatures of 120°C (up to 150°C under certain conditions). 【Features】 ■ Direct connection to a 2-pole motor; compact clean water general-purpose type ■ Achieves a lift of up to 350m ■ Two types of impellers designed for each diameter to match applicable flow rates ■ Enables high-efficiency operation over a wide range ■ Capable of transporting hot water at 120°C (up to 150°C under certain conditions) *For more details, please refer to the PDF document or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dual suction spiral pump "MD type"

It is a pump that works in various locations, from water intake and supply to industrial wastewater.

The dual suction spiral pump "MD type" has a low NPSH value and excellent suction performance, making it suitable for various applications from water intake and delivery to industrial wastewater. Additionally, its split casing design allows for easy inspection and maintenance of the rotating parts regardless of the piping. 【Features】 ■ Low NPSH value ■ Excellent suction performance ■ Versatile applications ■ Split casing design ■ Easy inspection and maintenance of rotating parts *For more details, please refer to the PDF document or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gokawa Pump Series Comprehensive Catalog

Featuring slurry pumps that contribute to creating a more comfortable and livable environment.

The "Furukawa Slurry Pump Series Comprehensive Catalog" is the general catalog for pumps from Furukawa Sanki Systems Co., Ltd., which manufactures and sells general industrial machinery. It includes various pumps suitable for general slurry transport and corrosive liquid applications, such as the "Liner Type Slurry Pump SPL" and the "Rubber Liner Dedicated Slurry Pump LK2," as well as the "Single Stage High Pressure Slurry Pump (End Suction Type) SP2H" and the "Two Stage High Pressure Slurry Pump SPF." [Contents] ■ Furukawa Pump Data Sheets (Pump Specifications / Motor Specifications) ■ Liner Type Slurry Pump SPL ■ Single Stage High Pressure Slurry Pump SP2H ■ Two Stage High Pressure Slurry Pump SPF ■ Large Diameter Heavy Concentration Slurry Pump SPD, and others For more details, please refer to the catalog or feel free to contact us.

Company：古河産機システムズ株式会社：古河機械金属グループ
Price：Other

pump
Sewerage facilities
Air compressors, blowers and pumps
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance heat pump "ECU Series"

High-performance heat pump that combines high performance, high reliability, and high durability.

The "ECU Series" is a device that extracts unused heat and waste heat that have been discarded until now, and uses it as an energy source to produce new hot water. Compared to the conventional simple heating method using heat from burning fuel, it contributes to significant reductions in fuel costs and CO2 emissions. 【Features】 ■ Produces hot water up to 95°C ■ Operates with a heat source as low as 12°C ■ High performance, high reliability, high durability ■ Achieves a maximum COP value of 7.59 *For more details, please download the PDF or feel free to contact us.

Company：日本エコソリューションズ
Price：Other

pump
Drainage and ventilation equipment
Water supply facilities
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sanitary Pump "Product Group CS"

Maintenance is easy without special tools. Makes sterilization work easier. Proven results in the food, pharmaceuticals, cosmetics, and chemicals industries! Demonstrations available!

The sanitary pump "Product Group CS" is used in the food, beverage, pharmaceutical, cosmetic, and personal care industries, where cleanliness, sterilization, and hygiene are of utmost importance. It features clean and safe performance, is easy to maintain without the need for special tools, and has a long lifespan due to a uniformly thick stator that eliminates the need for rotational adjustments during sterilization processes. This is a must-see for those struggling with "difficult sterilization processes," "the need for stable transfer flow rates and pressure," and "the requirement to use components that comply with hygiene standards." [Features] *Varies by type ■ CIP/SIP cleaning ■ Adoption of proven hygienic mechanical seals ■ Composed of FDA-compliant, 3-A approved components ■ No special tools required, easy maintenance ■ Easily transfers liquids from low-viscosity to high-viscosity *For more details, please refer to the PDF document or feel free to contact us. *We have a wide range of pumps available, so we can also provide suggestions tailored to your transport materials.

Company：日本シーペックス
Price：Other

pump
Sewerage facilities
Tunnel construction
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Open-type hopper pump [Solving the difficulty of transporting solids!]

Open hopper pumps solve the difficult transportation of various solids such as food ingredients, residues, and livestock waste, contributing to the maximization of plant performance.

The open-type hopper pump is mainly used for high-viscosity media that do not flow. It is equipped with a spiral feed screw at the inlet, allowing for smooth movement within the pump and efficient transfer. 【Features】 ■ The flow rate can be accommodated in the range of 0.5 - 130 m³/hr. ■ The maximum discharge pressure is 4.8 MPa, making it possible to transport to relatively distant locations. ■ The feed hopper can be designed to match the customer's input method. ■ A bridging prevention device can also be installed on the feed hopper. ■ Depending on the characteristics of the raw materials, a BTM type with crushing functionality can also be selected. ■ An optional dry run prevention device (TSE) can be added. ～Exhibition Information [Smart Community Japan]～ Date: June 15 (Wednesday) - June 17 (Friday), 2016, 10:00 - 17:00 Booth: Bio-66 *For details, please request materials or view the PDF data from the download.

Company：日本シーペックス
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low Flow Pump "Product Group D"

A metering pump that ensures accurate dosing with minimal pulsation, such as for drug injection. It can deliver low flow rates of 0.06 L/h and can pump up to 2.4 MPa.

The low-flow pump "Product Group D" allows for accurate measurement and dosing of precise quantities. It can transfer corrosive media, including fluids from low to high viscosity and solids, with low pulsation. Additionally, its compact design allows for installation both vertically and horizontally, and the suction casing can also rotate. 【Features】 ■ Achieves a high self-priming rate of up to 9 m lift even with liquids containing air/gas. ■ Minimal pulsation allows for flow control, eliminating the need for pulsation dampers or corrections. ■ Simple compatibility due to its modular structure. ■ Enables consistent and gentle transfer that is unaffected by pressure. *For more details, please refer to the PDF document or feel free to contact us. *We offer a wide range of pumps, so we can provide suggestions tailored to your transport needs.

Company：日本シーペックス
Price：Other

pump
Sewerage facilities
Tunnel construction
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SEEPEX Service Point

Automatically generate estimates for spare parts! Achieve faster order processing.

The "SEEPEX Service Point" is a product that allows individual access via a QR code attached to the pump. You can directly contact SEEPEX service via email, phone, or live chat. Inquiries about spare parts can also be made with just a tap. It enables the optimization of maintenance processes and digitizes all pump information clearly on-site. 【Service Contents】 ■ Individual access via the QR code attached to the pump ■ Download of product-specific operating manuals ■ Direct contact with SEEPEX service via email, phone, or live chat ■ Inquiries about spare parts can be made with just a tap *For more details, please refer to the PDF document or feel free to contact us.

Company：日本シーペックス
Price：Other

pump
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Comprehensive Catalog Available] Transfer pumps that can be selected according to viscosity and liquid properties.

Customizable according to usage and needs! We will propose suitable transfer pumps based on differences in viscosity, liquid properties, and solid concentration.

This catalog introduces the products handled by Japan SEEPEX Corporation. It details the structural principles of Smart Conveying Technology (SCT), which makes maintenance very easy and significantly improves the lifespan of the rotor and stator, as well as information on block structures, rotor and stator shapes, and more. Additionally, we present the advantages of each item, making it a useful reference. We encourage you to read it. [Contents (partial)] ■ Advantages of SEEPEX pumps ■ Solutions tailored to customer needs ■ About the rotor ■ About the stator ■ About the joints *For more details, please download the PDF or feel free to contact us.

Company：日本シーペックス
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air pressure-driven diaphragm pump "NDS Series"

Excellent maintainability, high explosion and fire resistance, and safety! Three types with different pump diameters are available in the lineup.

The "NDS Series" is a pneumatic diaphragm pump capable of pumping lubricants, hydraulic oils, cutting oils, as well as waste oils and waste liquids. Equipped with an accumulator, it absorbs discharge pulsation, allowing for smoother discharge. There is no risk of burnout due to overload, and it excels in maintenance. We offer three types with different pump diameters and discharge volumes per cycle. 【Features】 ■ High explosion and fire resistance for safety ■ Direction of discharge and suction ports can be freely changed ■ Discharge volume can be easily adjusted ■ Self-priming, so no priming water is required *For more details, please refer to the PDF materials or feel free to contact us.

Company：日建
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiently grind and polish! "Polygon Band & Drum"

The grinding cloth captures the workpiece broadly on the surface, improving work efficiency by about three times!

The "Polygon Band & Drum" from Ichiguchi is a band and drum designed for high-efficiency grinding and polishing by shaping the abrasive cloth into a multi-blade band configuration. Compared to existing flap wheels that perform grinding and polishing operations at the tip of the abrasive cloth, the polygon band allows work to be done on the surface of the abrasive cloth. This significantly improves workability. 【Features】 ■ Captures the workpiece as a surface rather than a point, greatly enhancing work efficiency (approximately three times) ■ The multi-blade shape provides an air-cooling effect, resulting in less heat accumulation in the workpiece ■ With a dedicated drum attachment, one-touch conversion to the required grit size is possible ■ Industrial waste weight is reduced to one-third, making it environmentally friendly We are currently offering a trial kit for the "Polygon Band & Drum." Take this opportunity to experience its usability and work efficiency! For more details, please contact us or download the catalog.

Company：イチグチ
Price：Other

Unit and other construction
others
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiently grind and polish! "Polygon Band Mini & Drum"

Band and drum that reduces working time by about 1/5 - the waste after product consumption is surprisingly minimal!

The "Polygon Band Mini & Drum" from Ichiguchi is a band and drum that efficiently grinds and polishes using the surface of abrasive cloth. Compared to existing flap wheels that perform grinding and polishing tasks with the tips of the abrasive cloth, the polygon band allows work to be done on the surface of the abrasive cloth. This significantly improves work efficiency. 【Features】 ■ Work can be done on the surface of the abrasive cloth → Faster than micro flaps! → Reduces work time to about 1/5 ■ The amount of waste after use is surprisingly low → Waste weight can be reduced to 1/5 ■ Small hole burrs can be easily removed ■ Easily achieves hairline finishing on iron, aluminum, and stainless steel We are currently offering a trial kit of the "Polygon Band Mini & Drum." Take this opportunity to experience its usability and work efficiency! For more details, please contact us or download the catalog.

Company：イチグチ
Price：Other

Work tools
others
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated diaphragm pump "ALBIN PUMP AD"

Reduce air consumption by 35% compared to conventional models! Ultra-compact, long-life Albin diaphragm pump.

The "ALBIN PUMP AD" is a revolutionary pump that breaks the conventional wisdom of traditional diaphragm pumps. With a new design structure, it minimizes pulsation (reducing it by 70% compared to conventional models), features a super compact design, extends the lifespan of the diaphragm, and reduces air consumption (electricity costs). Maintenance can be performed in just a few minutes while connected to the piping. 【Features】 ■ Air Pivot Valve (Air Drive Section) Reduces air consumption by 35% compared to conventional models! Solves the intermediate stop problem. Achieves efficient air control and suppresses air consumption. ■ Flap Valve (Liquid Contact Section) Installation angles can be freely adjusted—upside down, sideways, or vertically. Long lifespan with no clogging or issues associated with ball valves. ■ Flexible Diaphragm Suspension No vibrations during liquid transport, allowing for installation without securing the pump. Minimizes flow loss during re-sending, achieving a compact pump design. *For more details, please contact us or download the PDF for more information.

Company：Gadelius Industry K.K.
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Albin Tube Pump "ALBIN PUMP ALP"

It is an electric-driven pump with a self-supply capability of up to 6 meters and can also operate dry.

The Alvin tube pump may not always be installed in the appropriate location, so its self-priming capability and dry running function may be required. However, many electrically driven pumps find it difficult to achieve both of these performances. The ALP tube pump, while being electrically driven, has a maximum self-priming capability of 6 meters and can also operate dry. 【Features】 - Excellent self-priming capability, dry running possible - Seal-less structure for easy maintenance - Accurate reproducibility - Wide range of applications - Reversible rotation direction For more details, please contact us or download the catalog.

Company：Gadelius Industry K.K.
Price：Other

pump
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Waterco Sand Filter

Known for its impressive performance and reliability, it is recognized across industries worldwide.

Designed with the highest quality fiberglass using the latest technology. Long-term trouble-free operability. The distinctive multi-port bubble features a hexagonal valve with Rince Mode.

Company：アオイヤマト
Price：100,000 yen-500,000 yen

Pool equipment related
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wet-type single-screw small extruder 'ME-110INV' <for laboratory and trial use>

Excellent sanitary properties and compact! Here is a proposal for a high-torque, low-speed rotary single-screw extruder.

The "ME-110INV" is a compact extruder suitable for laboratory and trial use in the food, cosmetics, and pet food industries. In the 50Hz area of Eastern Japan, it operates at 16 revolutions per minute, while in the 60Hz area of Western Japan, it operates at 20 revolutions per minute. However, users can adjust the rotation speed between 12rpm (40Hz) and 23rpm (70Hz) according to the material's hardness and working speed. The nozzle die can be easily exchanged according to the application, and the extruding screw section can be completely disassembled for cleaning. 【Features】 - Compact size, ideal for small-scale production in research and development (laboratory, food, cosmetics applications) - The nozzle die can be easily exchanged according to the application (two sizes included as standard) - The extruding screw section can be completely disassembled for cleaning - Users can adjust the rotation speed between 12rpm (40Hz) and 23rpm (70Hz) *For more details, please refer to the related links or feel free to contact us.

Company：チヒロ東京営業所
Price：500,000 yen-1 million yen

others
pump

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sensor-type automatic drainage submersible pump UOX series

Energy-saving, labor-saving, and long-lasting underwater pump with capacitive sensor and microcontroller control.

The sensor reliably detects water using capacitive technology. It can be flexibly bent, making it effective in narrow spaces. Microcontroller control eliminates the distinction between the operation and stop sensors. After installation, when power is turned on, if the water level is between the start and stop positions, it will lower the water level to the stop position. A trial operation check can be performed after installation. If connected to power, it will operate once a week even when there is no water, reducing the risk of malfunction due to sticking of sliding parts and rust in contact areas. We also offer a sister product, the float type UOY series. There are sensor-type "DOX" for wastewater submersible pumps and float-type "DOY" series as well.

Company：櫻川ポンプ製作所
Price：100,000 yen-500,000 yen

Piping and insulation
Manhole body
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[NETIS Registration] Capacitive Automatic Drainage Submersible Pump UEX Series

NETIS registration. Next-generation automatic drainage submersible pump equipped with a microcontroller, capacitive sensors, and flexible sensor wires.

UEX Series NETIS Registered Product Submersible Pump ■ Automatic operation start with capacitive sensor Adopts a capacitive sensor that detects the conductivity of water, achieving stable water level detection. ■ Flexible sensor cable Allows for easy setting of the operation start water level without the use of tools. ■ Anti-seizing function If the operating state is not reached, the built-in microcontroller determines a 24-hour stop state and operates for 1.5 seconds to prevent seizing of sliding parts. ■ Automatic stop according to conditions The built-in microcontroller continuously calculates the operating conditions, achieving energy-saving operation by reducing the frequency of dry running starts. ■ Vortex impeller The gap between the impeller and casing is wide, preventing a sudden drop in lift due to impeller wear. NETIS (New Technology Information System) Registration Number: No.KK-130042-A

Company：櫻川ポンプ製作所
Price：Other

Piping and insulation
Water Treatment
Erosion control works
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra High Lift Submersible Pump U Ultra High Lift Series

Achieved an astonishing lift of up to 200 meters with a single unit.

We will not be outdone by other companies in raising water to greater heights. The highest grade can transport water up to 200 meters. Based on our experience in tunnel construction, we have adopted a cylindrical shape to minimize the maximum diameter as much as possible. The number of parts is small, resulting in a simple structure that is easy to maintain.

Company：櫻川ポンプ製作所
Price：Other

Piping and insulation
Bridge Construction
Tunnel construction
pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

pump Product List and Ranking from 337 Manufacturers, Suppliers and Companies | IPROS

pump Manufacturer, Suppliers and Company Rankings

pump Product ranking