pump Product List and Ranking from 337 Manufacturers, Suppliers and Companies | IPROS

Last Updated: Aggregation Period:May 27, 2026~Jun 23, 2026
This ranking is based on the number of page views on our site.

pump Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:May 27, 2026~Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. 岡三機工 Osaka//Building materials, supplies and fixtures manufacturers
  2. null/null
  3. サンエー工業 Tokyo//Facility Design Office
  4. 4 川本製作所 Aichi//others
  5. 5 アクアシステム 本社、須越工場、AQUASYSTEM(中国、タイ、ベトナム) Shiga//others

pump Product ranking

Last Updated: Aggregation Period:May 27, 2026~Jun 23, 2026
This ranking is based on the number of page views on our site.

  1. Smash Pump "KRBN Type" サンエー工業
  2. Water Heat Source Heat Pump "PMAC System" NIPPON PMAC Co., Ltd.
  3. Fire pump "Safety Ace Series KTY type" 川本製作所
  4. 4 Mortar-filled rebar joint "Slim Sleeve" 日本スプライススリーブ 本社
  5. 5 Wall-mounted air conditioner drain pump 'JM121S/JM122S'

pump Product List

961~990 item / All 1844 items

Displayed results

Air Pressure Pump APDS-1s/APDS-1.5s

[Sanitary Product / Heller Joint Specification] For the large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record for food use (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Vacuum Pump "APDQ1-25"

Collection of cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums for oil use.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely sucks volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum cans, suction only, no discharge ●Equipped with an anti-static grounding wire *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is sucked in through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air vacuum pump "APDQ1-25AS"

Collection of cutting fluids, waste oils, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ● Safely suction volatile and flammable liquids ● Cost-effective with low failure rates, reducing expenses ● Low air consumption, energy-saving ● Acceptable for small amounts of foreign substances ● Continuous operation possible ● Automatic stop when full ● Easy adapter installation (bag nut type) 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed negative pressure type for suction only, discharge not possible ● Equipped with an anti-static grounding wire *only for G and AS ● Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside through the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and draws in external air 5. Liquid is suctioned through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vacuum Pump APDQS-25SUS/APDQS-32SUS

[For solvents, acids, and alkalis] A separate type air vacuum pump for transferring high-viscosity liquids in large volumes, capable of disassembly and cleaning!

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary specifications with hygienic fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separation of the pressure reduction section (G3/4) and the suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently recover without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. * Please contact the contractor for disposal methods.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure & Vacuum Pump APDX1-25

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire (for G and AS only) ●Built-in float ball for leak prevention function

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure & Vacuum Pump APDX1-25G

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Equipped with an electrostatic discharge grounding wire (for G and AS only) ●Built-in float ball for leak prevention function

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air motor type chemical drum pump CHD-20APP (V/N)

[For Solvents / Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20APP (For Solvents) CHD-20APPV (For Solvents / with Ball Valve) CHD-20APPN (For Solvents / with Gun Nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Diaphragm Pump DF4D-20AS/DF6D-20AS (SUS)

Air-operated diaphragm pump capable of transferring high-viscosity oils and flammable liquids to high places or over long distances for solvent/drum use.

"DF Series" *AS, SUS DF4D-20AS (for solvents / for drums) DF6D-20AS (for solvents / for drums) DF6D-20SUS (for solvents / for drums) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Can be used without sealing the drum ◎ Powerful discharge "Benefits" ● Efficient transfer of high-viscosity liquids ● Safe transfer of flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability "Features" ● Dedicated to JIS standard 200L closed drums (large plug G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated diaphragm pump DF4H-15G/DF6H-20G

For oil, kerosene, light oil, and gasoline / both ends of the hose: High-viscosity oils and flammable liquids can also be transported to high places or long distances.

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air piston drum pump "PST-20G"

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air piston drum pump "PST-20SUS"

A pump suitable for transferring liquids with a viscosity of 20,000 cP or less! A high-lift pump with a discharge height of 50m (equivalent to ISO 1,000).

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Maximum lift capacity of 50m ●Piston-type pump (with pulsation)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air motor type centrifugal pump ACHD/ACHH/ACH-20AL

Air-operated handheld pump for kerosene and light oil, suitable for use in explosion-proof areas, easy to carry, designed for drum cans with hoses on both ends.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a type for drums with hose connection "Mechanism of the Centrifugal Pump" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radial Pin Piston Type AMH1D/AMH1H/AMH1-20FC

Radial piston vane pump, suitable for use in explosion-proof areas and easy to carry! For transferring liquids from tanks or drums such as kerosene and light oil.

**AMVH Series** AMH1-20FC (for oil, kerosene, diesel, biodiesel / pump only) AMH1D-20FC (for oil, kerosene, diesel / for drums) AMH1H-20FC (for oil, kerosene, diesel / hose at both ends) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in types for drums and hose connections **Mechanism of Radial Piston Motor** A motor that operates by alternately compressing air into three pistons. With three pistons built in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) within a height and distance of 15m.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric Drum Pump EVD-100/200/12/100H

An electric drum pump that is relatively high viscosity oil for electric types, ideal for transporting to high places.

**EVD Series** EVD-100 (For Oil / 100V) EVD-200 (For Oil / 200V) EVD-12 (For Oil / 12V) EVD-100H (For Oil / 100V) *Not suitable for kerosene, light oil, solvents, etc.* ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable **Benefits** ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000 cP **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Power supply options include AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes *Please be careful as the motor may burn out and cause failure* ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric Hand Pump EMH/EMHH-20FC/EMH-20SUS

For transferring low viscosity oils such as kerosene, light oil, and biodiesel! Electric handheld pump.

**EMH Series** EMH-20FC (for oil, kerosene, diesel, biodiesel / pump only) EMH-20SUS (for oil, kerosene, diesel, biodiesel, solvents / pump only) EMHH-20FC (for oil, kerosene, diesel / both ends with hose) **Advantages** ● Continuous operation possible ● Can transfer kerosene and diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with a relief valve (0.1MPa), vane pump ● Various customizations available for drum cans and hose connections *Note: The SUS type cannot be used with water or solvents.* **Mechanism of EMH Pump** The center of the pump body is slightly offset from the center of the impeller, creating a structure where the movable vanes extend due to centrifugal force. It adopts a principle of operation that increases pressure by reducing the volume with the vanes. Additionally, the EMH series uses Teflon and fluorine for the packing, allowing for the transfer of biodiesel.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric Chemical Drum Pump CHD-20HP (V/N)

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Complies with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for an air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric pump EVPH56-100 (ATN/K24/K24ATN)

Portable electric hand pump! Fast transfer of kerosene and light oil.

**EVP Series** EVPH56-100 (for kerosene and light oil / both ends with hose) EVPH-56ATN (for kerosene and light oil / both ends with hose / with auto-stop gun) EVPH-56K24 (for kerosene and light oil / both ends with hose / with flow meter) EVPH-56K24ATN (for kerosene and light oil / both ends with hose / with auto-stop gun and flow meter) ◎ Flow meter and auto-stop gun specifications ◎ Customizable **Benefits** ● Maximum discharge rate of 46L per minute ● Various applications available with flow meter and auto-stop gun options ● Continuous operation possible **Features** ● Designed specifically for JIS standard 200L closed drums (large plug G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in drum can type with hose connection ● Spiral type centrifugal pump **Mechanism of Vane Pump** The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. It adopts a principle of operation that increases pressure by reducing the volume with the vanes.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand Rotary Pump HR-2B

[For Oil] Manual pump that works great even in emergencies! For transferring low-viscosity liquids.

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Advantages》 ●Easy operation by simply turning the handle ●No power supply needed ●Can be used with A heavy oil and low viscosity oil (below 500cP) ●Very useful in emergencies and disasters 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●No strainer *The material of the hose during replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It is used as a pump that discharges by manual rotation, making it easy to operate.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand Rotary Pump HRD-25SUS/SUSH/SUSHM

Hand-cranked pump that performs exceptionally well even in emergencies! Made of all stainless steel, perfect for dispensing organic solvents.

**HRD Series** HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● No power supply needed ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● High volatility liquids can be safely handled with a sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters **Features** ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40-mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.*

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand Rotary Pump HRP-25III (H/HM)

Hand-cranked pump that performs exceptionally well even in emergencies! Lightweight body made of resin, suitable for dispensing organic solvents.

**HRP Series** HRP-25III (for solvents) HRP-25IIIH (for solvents / with hose) HRP-25IIIHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with a specific gravity (below 1.1) ● Safe for highly volatile liquids with a sealed adapter (HRP-25III HM) ● Great for emergencies and disasters **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and bending them excessively may cause tearing.*

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manual Hand Piston Pump S-L / S-LH-1

Just by moving the handle up and down, you can transfer high-viscosity liquids.

"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (below 10,000 cP) with a specific gravity of 1.5 or less ● Can portion winter oils that become hard (S-L series) ● Very useful in emergencies and disasters "Features" ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * Pull the handle slowly for high-viscosity liquids ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600 cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600 cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated vacuum pump APPQOAS

【For solvents / Liquid only】Collect low-viscosity liquid into open pails.

◎Simple structure, no worries about breakdowns ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated vacuum pump APPQ

【For oil / liquid only】Collect low-viscosity liquid into a closed pail can.

◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less likely to break compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated vacuum pump APPQG

[For kerosene and light oil / Liquid only] Collect low-viscosity liquid into a closed pail.

◎Simple structure that is trouble-free ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air-operated vacuum pump APPQAS

【For solvents / Liquid only】Collect low-viscosity liquid into a closed pail.

◎Simple structure with no risk of failure ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Diaphragm Pale Pump DF4P-15AS/DF4P-15SUS

Quickly transfer low-viscosity liquids for solvents.

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ● Efficiently transfers medium-viscosity liquids ● Usable with flammable liquids and small amounts of foreign matter ● Ideal for horizontal and high-lift transfer 《Features》 ● Continuous operation possible ● Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pail Pump APP-C-AL/APP-C-SUS

Pulsation-free discharge during carrier movement! Due to high pressure, injection and spraying are also possible.

《APP-C Series》 APP-C-AL (for oil) APP-C-SUS (for solvents) ◎ Compatible with different diameter cans, including pails and drums ◎ Suitable for high-viscosity liquids ◎ Efficient liquid discharge without waste 《Benefits》 ● For high-viscosity liquids (below 5,000 cP) ● Minimal residual liquid, no pulsation ● Can transfer to high places or long distances under high pressure 《Features》 ● Sealed pressurized type, for discharge only ● Entirely pressurizes pails and drums ● Continuous operation possible ● Lifting capacity of 30m ● Usable with air compressors of 1 horsepower (0.75 kW) or more

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Diaphragm Pump HDO-20ALA/(25)ALB/ALOZ

A manual hand diaphragm pump that is ideal for transporting fuel and water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

**HDO Series** HDO-20ALA (For oil, kerosene, light oil, and water / Hose nipple specification) HDO-20(25)ALB (For oil, kerosene, light oil, and water / Screw connection specification) HDO-20ALOZ (For oil, kerosene, light oil, and water / Coupler connection specification) ◎ For emergency water supply pump ◎ Easy to operate **Benefits** ● Performance of 8m suction (no priming required) and 8m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil **Features** ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble **Applications** ● Water supply and drainage pump for disaster situations ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge and emergency equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand diaphragm pump HDO-32ALB/HDO-40ALB

[Oil, kerosene, light oil, and water / screw connection specification] For transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ●Performance of 5m suction (no priming required) and 7m discharge ●Can be used in locations without power supply ●Can handle high-viscosity liquids and waste oil 《Features》 ●Made of aluminum ●Handle can be replaced every 90° ●Easy to disassemble and assemble 《Applications》 ●Water supply and drainage pump for emergencies ●Emergency waste liquid pump for facilities such as factories ●Pump for construction and civil engineering work ●Fuel supply pump for various vehicles and machinery ●Maintenance for machinery and various facilities ●Bilge pump and emergency standby equipment for ships and boats ●Rainwater utilization system for households ●Used cooking oil collection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand diaphragm pump ST-HDOS-32ALB/40ALB

【For oil, kerosene, diesel, and water / Screw connection specification】 Ideal for transferring fuel or water in places without power or during emergencies! Despite being a manual pump, it has excellent suction capability.

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows work to be done while standing 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Collection of used cooking oil 《As an emergency pump》 ● Can suction up to the 2nd or 3rd floor of a building ● Usable for refueling emergency power supplies on building rooftops ● For transferring toilet water or water tanks in emergencies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration