pump - メーカー・企業337社の製品一覧とランキング | イプロス

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

pumpのメーカー・企業ランキング

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 岡三機工 Osaka//Building materials, supplies and fixtures manufacturers
  2. null/null
  3. サンエー工業 Tokyo//Facility Design Office
  4. 4 川本製作所 Aichi//others
  5. 5 アクアシステム 本社、須越工場、AQUASYSTEM(中国、タイ、ベトナム) Shiga//others
企業ランキングへ

pumpの製品ランキング

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Smash Pump "KRBN Type" サンエー工業
  2. Water Heat Source Heat Pump "PMAC System" NIPPON PMAC Co., Ltd.
  3. Fire pump "Safety Ace Series KTY type" 川本製作所
  4. 4 Mortar-filled rebar joint "Slim Sleeve" 日本スプライススリーブ 本社
  5. 5 Wall-mounted air conditioner drain pump 'JM121S/JM122S'

pumpの製品一覧

871～900 件を表示 ／ 全 1841 件

表示件数
[Case Study] Elimination of Foreign Matter Contamination During Concentrated Juice Transfer

[Case Study] Elimination of Foreign Matter Contamination During Concentrated Juice Transfer

Eliminating foreign matter contamination with existing rotary pumps! A case study from a food manufacturer.

The food manufacturer was transferring concentrated fruit juice (with a maximum viscosity of 20,000 mPa·s) from the raw material tank to the filling machine tank at a flow rate of 2 tons per hour. However, the existing rotary pump generated wear particles from the mechanical seal, which sometimes mixed into the liquid, leading to the need for frequent disassembly and inspection, presenting various challenges. For solutions to the challenges and requests, please download and view the PDF document. 【Customer's Challenges and Requests】 ■ Disassembly exposed the system to outside air, increasing the risk of bacterial growth with each inspection. ■ Specialized maintenance personnel were required, and the replacement parts were expensive, resulting in high maintenance costs. ■ Wear particles from the pump's mechanical seal sometimes mixed into the liquid, necessitating frequent disassembly and inspection. *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] High-pressure injection of 90°C high-temperature liquid into an extrusion molding machine.

[Case Study] High-pressure injection of 90°C high-temperature liquid into an extrusion molding machine.

We have resolved the request to use a pump for injecting additives into a resin extrusion molding machine! Here is a case study from a resin product manufacturer.

The resin product manufacturer requested to use a pump to inject additives into the resin extrusion molding machine. However, there were challenges such as "a pressure of over 5MPa is required at the injection point" and "the viscosity increases when the liquid temperature drops, so it needs to be maintained at 70-90°C." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ A pressure of over 5MPa is required at the injection point ■ Pulsation in the pump causes uneven injection, so a continuous and consistent amount needs to be injected ■ The viscosity increases when the liquid temperature drops, so it needs to be maintained at 70-90°C ■ Due to high temperature and high pressure, safety measures are necessary ■ It should be movable rather than fixed to one location *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Circulation of 75% sulfuric acid at high temperature for an extended period at a constant flow rate.

[Case Study] Circulation of 75% sulfuric acid at high temperature for an extended period at a constant flow rate.

We have resolved the request to circulate sulfuric acid in the laboratory's experimental line! Here is a case study from a chemical plant manufacturer.

The request from the chemical plant manufacturer was to circulate sulfuric acid at a temperature of 150°C and a concentration of 75% in the laboratory's experimental line. However, there were challenges such as wanting to "maintain a constant flow rate" and that "there were no products from other companies that met the conditions." Please download the PDF document to see the solutions to the challenges and requests. 【Customer's Challenges and Requests】 ■ Want to maintain a constant flow rate ■ Due to the need for high corrosion resistance, they prefer PTFE lining for the material ■ Assuming operation for about 10 hours a day ■ There were no products from other companies that met the conditions *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Transferring solvent-based slurry at a flow rate of 50L per minute and measuring the flow rate.

[Case Study] Transferring solvent-based slurry at a flow rate of 50L per minute and measuring the flow rate.

We have resolved the request to transfer organic solvents containing micro-particles of a few microns! Here is a case study from a petrochemical manufacturer.

The request from the petrochemical manufacturer was to transfer organic solvents (diglyme) containing micro-particles of a few microns. Furthermore, they requested that "the flow rate be 50L/min and the discharge pressure be 0.5MPa" and that "they want to monitor and record the actual flow rate." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ Flow rate of 50L/min and discharge pressure of 0.5MPa are required ■ They want to monitor and record the actual flow rate *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Solving Wear from High Concentration Slurry and Improving Coating Precision

[Case Study] Solving Wear from High Concentration Slurry and Improving Coating Precision

To solve the challenge of needing to supply liquid at a constant flow rate to ensure a uniform coating surface, we introduce a case study from an electronic components manufacturer.

The electronic component manufacturer was using a gear-type pump to supply a slurry-like high-viscosity liquid (3000 mPa·s) to the coating machine. However, there were issues such as "the slurry particles getting clogged in the pump, causing it to stop" and "severe wear on the pump, leading to a decrease in flow rate in a short time." For solutions to these issues and requests, please download and view the PDF document. 【Customer's Issues and Requests】 ■ The slurry particles got clogged in the pump, causing it to stop. ■ There was severe wear on the pump, leading to a decrease in flow rate in a short time. *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Sharpening Particle Size Distribution through Dispersion Process with Bead Mill

[Case Study] Sharpening Particle Size Distribution through Dispersion Process with Bead Mill

We will introduce a case where the bias of beads can be suppressed, resulting in a sharp particle size distribution!

At the material manufacturer, dispersion was carried out using a bead mill to micronize ceramics. However, there were challenges such as "the beads are unevenly distributed in the disperser due to pump pulsation, leading to over-dispersion" and "beads flowing out from the exit side of the bead mill, which can get caught in the pump and cause abnormal stoppage." For solutions to these challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ The beads are unevenly distributed in the disperser due to pump pulsation, leading to over-dispersion. ■ Beads can flow out from the exit side of the bead mill, getting caught in the pump and causing abnormal stoppage. ■ Due to small-batch production of various types, frequent liquid changes are necessary, resulting in a high cleaning frequency. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Achieving reduced high-pressure injection time and extended lifespan for filter presses.

[Case Study] Achieving reduced high-pressure injection time and extended lifespan for filter presses.

Solved the issue of pump wear caused by particles in the liquid, which required frequent parts replacement! Introduction of a delivery case.

At the water treatment plant manufacturer, sludge was being fed into a filter press (pressure filter) using a high-pressure pump for dewatering. However, with the existing pump, issues arose such as "when the filter becomes clogged and pressure rises, the pump's flow rate decreases, leading to longer dewatering times." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ When the filter becomes clogged and pressure rises, the pump's flow rate decreases, resulting in longer dewatering times. ■ The pump wears out due to particles in the liquid, requiring frequent parts replacements. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Halving the Electricity Costs of Electrolyte Circulation Pumps

[Case Study] Halving the Electricity Costs of Electrolyte Circulation Pumps

Solving the problem of poor energy efficiency and high electricity costs! Introducing a case study from an aluminum processing manufacturer.

At the aluminum processing manufacturer, sulfuric acid in the electrolyte solution is circulated by a pump during the anodizing process of aluminum. They are using a special alloy spiral pump, which has the issue of "poor energy efficiency and high electricity costs." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ Poor energy efficiency and high electricity costs *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Reducing Maintenance Load for High-Temperature Hydrofluoric Acid Transfer Pumps

[Case Study] Reducing Maintenance Load for High-Temperature Hydrofluoric Acid Transfer Pumps

Troubles such as liquid leakage have been resolved! Introducing a case study from a steel manufacturer.

At the steel manufacturer, high-temperature nitric acid is being transported within the steelworks. Traditionally, PFA-lined pumps were used, but there were issues such as "the lining peeling off or pinholes opening due to temperature and pressure changes, leading to corrosion of the pump and liquid leakage." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ The lining peels off or pinholes open due to temperature and pressure changes, causing the pump to corrode and liquid to leak. ■ The structure of the mechanical seal is complex and requires considerable adjustment. ■ Wear and liquid leakage frequently occur due to slurry retention. ■ The maintenance burden is significant. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Achieving Significant Improvement in Thin Film Coating Quality and Substantial Reduction in Waste Liquid Volume

[Case Study] Achieving Significant Improvement in Thin Film Coating Quality and Substantial Reduction in Waste Liquid Volume

A uniform coating can now be achieved! Introducing case studies from material manufacturers.

At the material manufacturer, during the manufacturing process of functional films, an adhesive was supplied to the coating machine via a pump for laminating the films. However, there were issues such as "the existing pump has unstable delivery volume, resulting in uneven coating thickness" and "the amount of waste has reached approximately 10 million yen annually." For solutions to the issues and requests, please download and view the PDF document. 【Customer's Issues and Requests】 ■ The existing pump has unstable delivery volume, resulting in uneven coating thickness. ■ If there is insufficient coating liquid, air bubbles form, leading to defective products, so the delivery volume is set higher. ■ Excessively supplied coating liquid cannot be reused and is discarded, leading to waste amounting to approximately 10 million yen annually. *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Study] Improving Workability and Coating Quality in Small-Volume Painting

[Case Study] Improving Workability and Coating Quality in Small-Volume Painting

Measurement and control using flow meters is now possible! Here we introduce examples from contract processing manufacturers.

At the contract manufacturing company, paint is supplied to the spray gun via a pump on the small parts painting line, and traditionally, air-driven diaphragm pumps have been used. However, there have been issues such as "we want to measure and control the actual flow rate, but due to pulsation, it cannot be accurately measured with a flow meter." For solutions to the challenges and requests, please download and view the PDF materials. [Customer's Challenges and Requests] ■ When the pressure in the piping increases due to nozzle clogging or changes in paint viscosity, the pump's discharge volume decreases, necessitating the adjustment of pressure by operating back pressure valves, pressure reducing valves, and air supply valves. ■ We want to measure and control the actual flow rate, but due to pulsation, it cannot be accurately measured with a flow meter. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Continuous spectral measurement for long durations, which was not possible with a syringe pump, is now achievable.

[Example] Continuous spectral measurement for long durations, which was not possible with a syringe pump, is now achievable.

One pump to handle various conditions! Introducing a case study adopted by a private university!

At the private university (Faculty of Science and Engineering), solvents containing pharmaceutical materials (such as methanol and diethyl ether) were being pumped and analyzed using spectroscopy. However, since a syringe pump was being used, there were issues such as "the amount that can be continuously delivered is limited by the syringe capacity." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ The amount that can be continuously delivered is limited by the syringe capacity. ■ To conduct long-duration continuous experiments, it is necessary to refill the syringe with liquid periodically. ■ Setting and calibrating the flow rate takes time. ■ It is necessary to switch between pumps and syringes depending on the flow rate. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-pressure injection of boiler chemicals and resin molding line, non-pulsating plunger pump PL.

High-pressure injection of boiler chemicals and resin molding line, non-pulsating plunger pump PL.

A pulsation-free quantitative supply pump ideal for high-pressure injection of boiler chemicals, additive injection into resin molding lines, and other chemical injections into high-pressure lines.

The Takumina precision pump offers the "Smooth Flow Pump," a problem-solving pump that addresses all issues and complaints related to pumps, from research and development to process lines! The 'PL' plunger type is the ideal pump for high-pressure injection of boiler chemicals, additive injection into resin molding lines, and chemical injection into other high-pressure lines. **Main Features** - **No flow reduction due to pressure fluctuations**: The check valve mechanism prevents flow reduction even with pressure variations. - **Easy maintenance**: No need for an accumulator or cushion tank to eliminate injection inconsistencies. The contact parts are minimal, making disassembly and cleaning easy. - **No need for dampers or accumulators**: Accumulators can be slow to respond and require careful force management, but the Smooth Flow Pump responds quickly, eliminating the hassle of pressure adjustments and maintenance. - **Significant reduction in trouble factors**: By omitting the mixing process in the tank, the occurrence of accidents and failures is minimized. - **Simple piping, cost-effective & space-saving**: Compared to pulsating pumps, the discharge side piping can be narrower, resulting in less loss of transferred chemicals and greater economic efficiency. - **Excellent responsiveness**: Instant response for flow adjustments. It discharges immediately upon starting and has no liquid dripping when stopped.

  • Drainage and ventilation equipment
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Sodium hypochlorite injection dedicated medication pump DCLPW・CLPW

Sodium hypochlorite injection dedicated medication pump DCLPW・CLPW

A dedicated machine for injecting sodium hypochlorite with peace of mind. Equipped with an inline automatic air release mechanism and an air block mechanism for double blocking!

This is a gas-lock-free type pump specifically designed for sodium hypochlorite injection. 【Main Features】 ■ Automatic air venting mechanism that reliably eliminates sucked-in air Adopts a special valve seat mechanism (patented) that facilitates air venting. Even if air mixes into the pump head or is generated within the pump head, it is automatically and reliably eliminated. It also quickly removes air during restart after long periods of inactivity or during low-speed operation. ■ Air block mechanism that prevents air from mixing into the pump head (only for DCLPW) The DCLPW is equipped with an air block mechanism that prevents air mixing. Even if up to 15cc of air is injected at once, no air will mix into the pump head. ■ Pump head structure that minimizes air retention The flow path within the pump head is minimized to reduce dead space, decreasing the amount of air mixing and retention while increasing the compression ratio, making it easier to discharge air. ■ Transparent acrylic head for easy visibility of the pump head interior The transparent acrylic head allows for immediate visibility of the pump's operating condition, as well as the state of air mixing and retention. ■ Sodium hypochlorite-specific injection nozzle to prevent clogging at the injection point The injection nozzle developed specifically for sodium hypochlorite prevents backflow of raw water and crystallization or clogging due to reactions with raw water at the injection point.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Clean, safe, and easy to handle! Carbon dioxide pH neutralization device 'NAC'

Clean, safe, and easy to handle! Carbon dioxide pH neutralization device 'NAC'

Clean, safe, and easy to handle! Takumina's carbon dioxide pH neutralization device 'NAC'.

Takumina's carbon dioxide pH neutralization device 'NAC' safely, easily, and economically neutralizes the pH of boiler wastewater using carbon dioxide! ~Main Features~ ■ No generation of harmful substances, clean pH neutralization using carbon dioxide generally does not produce corrosive gases or harmful substances, making it very clean. ■ No concern for secondary pollution, safe Compared to neutralization treatment using sulfuric acid or hydrochloric acid, the device is simpler. It is easy to handle, poses less risk, and is a safe facility with no concern for secondary pollution. ■ No complicated handling, easy Using a carbon dioxide cylinder (non-siphon type) eliminates the need for complicated handling. The gas is extracted in gaseous form from the cylinder, so no vaporization device is required. ■ High mixing efficiency achieved with unique internal control technology The newly adopted Takumina mixer significantly improves the mixing efficiency of carbon dioxide. ■ Easy operation and maintenance Operation is simple, and maintenance is easy. Additionally, various safety designs and alarm mechanisms are provided to enhance the reliability of the system. ■ Space-saving and easy installation The main unit requires a compact installation space of 600×600mm and can be used both indoors and outdoors. Furthermore, there is no need for a stirring tank, as treatment can be performed with this device alone.

  • Water Treatment
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Scale Watcher Introduction Case Study] Water Treatment Equipment for Leisure Facilities

[Scale Watcher Introduction Case Study] Water Treatment Equipment for Leisure Facilities

35% reduction in pool chlorine input! Introducing case studies on the effects of implementing a light industrial water treatment system.

We would like to introduce the case study of the introduction effect of the frequency modulation electromagnetic field water treatment device "Scale Watcher" handled by B-Tep Co., Ltd. In leisure facilities, the excessive use of chlorine disinfectants resulted in a strong chlorine odor, skin irritation, clogging of filter cartridges, and problems due to decreased capacity from the hardening of filter media. After installing this product, the solubility of chlorine improved, making it easier to maintain the concentration standards. The usage of chlorine disinfectants was reduced by 35%, and the odor was also mitigated, creating a more comfortable environment. Additionally, the processing capacity of the filters significantly improved, and backwashing of the filter media became easier. Furthermore, it contributes to the improvement of environments in golf course sprinklers and bathrooms/toilets. [Case Study] ■ Installed in a leisure facility (pool) ■ Issues - Strong chlorine odor and concerns about skin irritation due to excessive use of chlorine disinfectants - Decreased capacity due to clogging of filters and hardening of filter media - Increased costs due to more frequent replacements ■ Introduction Effects - 35% reduction in the use of chlorine disinfectants - Significant improvement in filter processing capacity - Easier backwashing of filter media *For more details, please refer to the PDF document or feel free to contact us.

  • ろ過フィルターの延命効果.jpg
  • 砂ろ過材の改善効果.jpg
  • Water Treatment
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Japan Kanomax Gilair Plus

Japan Kanomax Gilair Plus

Japan Kanomax Co., Ltd. (Chairman Minoru Kano) began selling the Gile Air Plus in Japan starting February 2012.

The "Gilu Air Plus" is a revolutionary pump that allows for constant flow control suction across a wide flow range of 20 to 5000 mL by switching flow modes. It also enables switching between constant flow and constant pressure modes, making it possible to perform various sampling purposes with a single pump. Additionally, its compact and lightweight design allows for stress-free use as a personal sampler, reducing the burden of portability. There are three models available in the lineup. The basic model is equipped with essential features such as timer settings, program settings, and a fault function (pause function) for situations where normal sampling cannot be performed, and it comes standard with a NiMH rechargeable battery. The data logging model adds data logging and PC connectivity to the basic model. The STP model includes all the features of the data logging model, along with the ability to measure temperature/pressure and perform flow correction.

  • Other measuring instruments
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Standard Type Dry Vacuum Pump KRF Series

Standard Type Dry Vacuum Pump KRF Series

Orion Machinery/Vacuum Pump. Achieves safe design, low operating noise, and long lifespan. Environmentally friendly next-generation pump.

■Safe design, environmentally friendly, CE marking compliant. ■Low operating noise, with a noise reduction of 3dB (compared to conventional models) due to quiet design. ■30% longer lifespan due to the adoption of new material blades (compared to conventional models). ■Compliant with RoHS directive.

  • Air compressors, blowers and pumps
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Large Standard Dry Vacuum Pump KRF Series

Large Standard Dry Vacuum Pump KRF Series

Orion Machinery/Vacuum Pump. Safe design and low operating noise achieved. Environmentally friendly next-generation pump.

■Safe design, environmentally friendly, CE marking compliant. ■Low operating noise, with a noise reduction of 3dB (compared to conventional models) due to quiet design. ■10% increase in lifespan due to the adoption of new material blades (compared to conventional models). ■Compliant with RoHS directive.

  • Air compressors, blowers and pumps
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Combination Package Type Dry Vacuum Pump CBXP Series

Combination Package Type Dry Vacuum Pump CBXP Series

Orion Machinery/Vacuum Pumps. Enhanced product lineup through packaging series. Various combinations such as vacuum-blower, vacuum-vacuum, blower-blower, etc.

■Enhanced product lineup through packaging series. We have prepared 19 models with various combinations such as vacuum-blower, vacuum-vacuum, and blower-blower. ■Achieved low operating noise. Reduced by 3 to 5 dB compared to our conventional models. ■Equipped with proven standard pumps, improving maintainability.

  • Air compressors, blowers and pumps
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Directly Coupled High Vacuum Dry Pump KHF Series

Directly Coupled High Vacuum Dry Pump KHF Series

Orion Machinery/Vacuum Pumps. CE marking compliance is part of the standard lineup.

■CE marking compliant (Type 04,01B). ■Continuous operation possible at the set pressure. ■Blade replacement is easy (compared to KHA series). ■High operating vacuum level, ideal for replacing ejectors and for automatic machines (such as assembly machines) for small components like electronic parts.

  • Air compressors, blowers and pumps
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High Vacuum Dry Vacuum Pump KHA Series

High Vacuum Dry Vacuum Pump KHA Series

Orion Machinery/Vacuum Pump. Continuous operation is possible at a pressure of 8 kPa or lower.

■Continuous operation is possible at a pressure of 8 kPa or lower. ■The operating vacuum level is high, making it ideal for automatic machines for small components such as electronic parts (e.g., mounting machines).

  • Air compressors, blowers and pumps
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High Vacuum Dry Vacuum Pump KHH

High Vacuum Dry Vacuum Pump KHH

Orion Machinery / Vacuum Pump. Achieves continuous operation at high vacuum of 1.3 kPa [abs] in a dry state.

■Can be used continuously under conditions of an absolute pressure of 1.3 kPa or lower, making it ideal for various industries that require high vacuum. ■It is a compact type directly connected to the motor flange. ■It operates quietly and has a long lifespan.

  • Air compressors, blowers and pumps
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Deep well submersible pump SP

Deep well submersible pump SP

Grundfos pump. A groundwater supply pump made of corrosion-resistant stainless steel.

The SP submersible pump product range is renowned for its high efficiency and reliability. All SP pumps are made from corrosion-resistant stainless steel and can be used for various applications. The SP pumps are manufactured with cutting-edge fluid design to provide optimal efficiency during peak demand. They also promise long-term cost savings and reliable operation for all applications. Features of the SP product range include high efficiency, motor burn-out protection (through a combination of sensors and protective devices), and easy maintenance. A complete monitoring and control system allows for continuous optimization of the pump system.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Natural Energy Compatible Pump System SQ Flex

Natural Energy Compatible Pump System SQ Flex

Grundfos pump. The SQ Flex system is a water supply system based on renewable energy such as solar and wind energy.

The SQ Flex pump is an environmentally friendly water supply solution equipped with a permanent magnet motor that efficiently utilizes natural energy. It provides the perfect water supply solution for remote areas with water shortages and unstable or no power supply. The SQ Flex is a complete intelligent system that goes beyond just a pump. The pump has built-in electronic components, allowing it to operate on DC power without the need for an external conditioner. You can choose from 10 different pump sizes. The 4 types of helical rotor pumps are designed for applications requiring high lift, while the 6 types of vortex pumps are suitable for applications requiring high flow rates.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
3-inch deep well submersible pump SQE

3-inch deep well submersible pump SQE

Grundfos pump. It is a compact design pump with excellent efficiency, capable of handling lift heights of up to 200 meters.

The SQE3-inch submersible pump allows you to choose a model that meets your individual requirements across a wide range of performance. It is a compactly designed 3-inch multi-stage centrifugal pump that can be installed in boreholes smaller than the pump dimensions. The SQE pump has built-in electronic components, making installation and operation very easy, and we promise reliable and stable water supply. The pump, equipped with a permanent magnet motor, features a flexible and compact design that ensures excellent efficiency and can handle lift heights of up to 200 meters. By using the "SQEP," which combines the SQE pump with a surface control unit, constant pressure water supply is possible.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Vertical multi-stage spiral pump CR/CRN

Vertical multi-stage spiral pump CR/CRN

Grundfos pumps. Suitable for almost all industrial solutions. The modular structure allows for a wider range of applications.

The standard CR pump, which has a wide range of products, is suitable for almost all industrial solutions. Additionally, its modular structure allows it to accommodate a broader range of applications. The standard CR pump is available in four materials: cast iron, two different types of stainless steel, and all titanium. It offers 11 different flow ranges, a maximum pressure of 50 bar, various shaft seals, rubber materials, and supply voltages. Although the pump components are affected by various liquids or harsh operating conditions, they can be optimized for specific applications and designed for special requirements.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Booster Module BM

Booster Module BM

Grundfos pump. Used for boosting, liquid transfer, and circulation within systems under high static pressure.

The high-pressure booster module can be used for applications such as pressurization, liquid transport, and circulation within systems under high static pressure. It is adopted in reverse osmosis systems for household water supply, hospitals, laboratories, the chemical industry, the electronics industry, and the metal industry. It can also be used in the chemical industry, zinc plating industry, painting factories, as well as in the metal and mineral industries.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Immersion-type coolant pump MTR

Immersion-type coolant pump MTR

Grundfos pump. Used for the circulation of coolant liquids in various machine tools, circulation of cleaning liquids in cleaning devices, and for various filtration devices.

The immersion-type coolant pump MTR can be used for circulating coolant liquids in various machine tools, circulating cleaning liquids in cleaning devices, and for various filtration devices. It is designed to be installed directly on the tank, with the pump section immersed in the liquid used in the tank. A wide range of flow rates and pressures, as well as immersion lengths, can be selected due to the rich combination of pump sizes and impeller stages.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-stage immersion coolant pump MTD

Multi-stage immersion coolant pump MTD

Grundfos pump. It is an ideal product for transferring dirty liquids generated during the machining process of machine tools to a filtration system.

The MTD immersion-type multi-stage coolant pump for dirty liquids is an ideal product for transferring dirty liquids generated during the machining process of machine tools to a filtration system. It features a semi-open impeller that can transport dirty liquids containing foreign substances such as solids, chips, and shavings, with a maximum size of up to 25mm.

  • pump
  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

pumpに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.