pump - メーカー・企業40社の製品一覧とランキング

更新日： 集計期間:Sep 03, 2025～Sep 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

pumpのメーカー・企業ランキング

更新日： 集計期間:Sep 03, 2025～Sep 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 岡三機工 Osaka//Building materials, supplies and fixtures manufacturers
  2. null/null
  3. アーチバック Kanagawa//Building materials, supplies and fixtures manufacturers
  4. 4 日本スプライススリーブ 本社 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 NIPPON PMAC Co., Ltd. Tokyo//Building materials, supplies and fixtures manufacturers
企業ランキングへ

pumpの製品ランキング

更新日： 集計期間:Sep 03, 2025～Sep 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Indoor Air Quality Multi-Sensor 'QNA2700D' アーチバック
  2. Water Heat Source Heat Pump "PMAC System" NIPPON PMAC Co., Ltd.
  3. One-handed portable AC 100V power mortar pump OKP-07M 岡三機工
  4. 4 Wall-mounted air conditioner drain pump 'JM121S/JM122S'
  5. 5 Mortar-filled rebar joint "Slim Sleeve" 日本スプライススリーブ 本社

pumpの製品一覧

1576～1590 件を表示 ／ 全 1855 件

表示件数
Fire pump "Safety Ace"

Fire pump "Safety Ace"

We respond to the increasing demand for "safety" with a rich lineup and reliable features.

We would like to introduce our fire pump "Safety Ace." The pump features an easy-to-read digital ammeter and voltmeter for performance verification. The pressure gauge and compound gauge are standard with a large diameter of φ100. Additionally, the suction tank is resistant to rust and scratches due to high-quality powder coating, ensuring no concerns about corrosion-related holes even after long-term use. 【Features】 <High-Function Microcomputer Control Panel> ■ Standardized circuits for full and low water levels in the suction tank, fire water tank, and replenishment tank. <High-Quality Suction Tank> ■ High-quality coating ■ Electrode-type liquid level detection ■ Compliance with standard specifications for public building construction (special specifications) *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Water supply facilities

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Industrial pump series for management equipment and production equipment.

Industrial pump series for management equipment and production equipment.

Supporting production activities with a rich lineup! We contribute to energy saving in factories.

At Kawamoto Pump, we offer a wide range of "industrial pumps." Our products are designed to handle hot water, cold water, seawater, pure water, and other special liquids, based on stainless steel and resin materials, and are actively used in various production activities. Our pumps, known for their durability and well-received in the equipment market, help reduce maintenance costs, while our pressurized water supply pumps, boasting top-class efficiency in the industry, contribute to energy savings in factories. Please feel free to contact us when you need assistance. 【Line-up for Management Equipment】 ■ Water Intake Pumps: US2 type, KUR2/3 type ■ Pressurized Water Supply Pumps: KFE type ■ Transfer and Circulation Pumps: PSS(2) type, GES type ■ Drainage Pumps: VUS type, WUP4 type ■ Seawater Pumps: GSP3/4 type, GEZ type *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • Water supply facilities

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Rebar processing service

Rebar processing service

We process various types of rebar for civil engineering and construction work, including PC rebar and high-strength rebar!

Our company uses shear cutters, band saws, high-strength bending machines, and high-strength automatic multi-angle bending machines to perform various cutting and bending processes for rebar. We can process up to 350 tons per day, totaling approximately 80,000 tons annually. Additionally, we also handle the processing of pile rebar, which we assemble in our factory and deliver to the site, eliminating the need for equipment to process rebar, assembly space, and storage on-site. 【Our Features】 ■ Capable of processing high-strength SD685 D51 ■ Can bend SD490 D51 with a bending radius of up to 700mm ■ Precision cutting of threaded rebar is possible ■ R bending processing available for D10 to D38 *For more details, please download the PDF or feel free to contact us.

  • Steel bar construction
  • Steel

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FPD Module Automatic Lighting Inspection Device "M-CONTact Series"

FPD Module Automatic Lighting Inspection Device "M-CONTact Series"

Are you having trouble with poor lighting? We will solve it with technology that ensures reliable illumination!

The "M-CONTact Series" is an automatic lighting inspection device that is essential for the automatic operation and inspection of modules that approach completion during the production process, allowing for automatic contact with signal interfaces for FPD modules. With a concept focused on flexibility and development, it achieves automation and labor-saving in small-batch production of various types, as well as efficient use of installation space. By miniaturizing the device size, it can flexibly adapt to layouts that meet specific needs. 【Features】 ■ Technology to ensure reliable lighting: Versatility of inspection targets ■ Flexible response technology: Freedom of configuration and development ■ Appropriate inspection environment technology: Ensured functionality and stability *For more details, please refer to the PDF materials or feel free to contact us.

  • Other measuring instruments
  • Other analytical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Oil Service System Product Catalog

Oil Service System Product Catalog

Achieve ideal work efficiency and labor environment! Centralized management of fuel supply and waste oil, controlled by a system.

This catalog introduces Banzai's "Oil Service System." It focuses on the basic car maintenance task of oil changes, which are repeatable, managing each function from refueling to waste oil disposal in a way that connects them with the shortest possible workflow. This achieves ideal work efficiency and labor conditions. We hope you will find this product useful as part of your service strategy. Please use it for selecting products. [Contents] ■ Refueling System ■ Oil Supply and Waste Oil System ■ Waste Oil System *For more details, please refer to the PDF document or feel free to contact us.

  • Emergency alarm system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-material cosmetic pump contributing to SDGs

Single-material cosmetic pump contributing to SDGs

This is an environmentally friendly product made of 100% plastic.

. Spring PP material . 100% PP material . PCR material can also be used . Liquid output: 1.5cc-4cc

  • 企業：DINOS
  • 価格：Other
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mortar Pump "P13"

Mortar Pump "P13"

A highly durable and practical design! A powerful piston pump supplies various materials.

The P13 is a complete mixing, concrete pumping, and spraying machine equipped with a mixer, pump, and compressor. It is used on various job sites that require high capacity, long lifespan, and low operating costs. It can handle almost all types of sand up to a grain size of 8mm without any issues. Putzmeister's engineers will advise on the details of individual requirements. Please feel free to contact us when needed. 【Features】 ■ A robust and low-maintenance pump for mixed materials produced at various job sites ■ A sturdy and powerful piston pump (KA 230) that can handle sand ■ The discharge volume can be mechanically set to three levels ■ A 170L mixing mixer ensures optimal mixing quality ■ The motor, compressor, and gear drive are well protected *For more details, please refer to the "Special Site" below or feel free to contact us.

  • Concrete Machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mortar Mixer Pump "MP25"

Mortar Mixer Pump "MP25"

Easy and safe transportation is possible! You can insert the rotor into the insertion aid with both hands!

The "MP25" is a mortar mixer pump that allows for comfortable operation since all control and display elements are located on one side. It can handle all pumpable mixed mortars, including ground coat plaster, reinforced mortar, fireproof mortar, and texturing plaster, both indoors and outdoors. The modular group can be easily loaded onto a vehicle or transported to upper floors of a construction site, where hoses can be connected and work can begin. 【Features】 ■ Convenient operation from one side ■ Reinforced frame with insertion aids for warm parts and toolboxes ■ Can be disassembled for convenient assembly without tools ■ Easy and safe transportation ■ Conical mixing pipe *For more details, please refer to the "Special Site" below or feel free to contact us.

  • Concrete Machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Stationary Concrete Pump 'P730'

Stationary Concrete Pump 'P730'

A wide variety of equipment and options available! The three-cylinder engine fully complies with European Stage V emission standards.

The P730 is a compact and powerful stationary concrete pump equipped with a maximum discharge pressure of 55 bar and a discharge capacity of 30 m³/h. It reliably pumps concrete with a maximum aggregate size of 32 mm over long distances. The powerful piston pump is suitable for applications using shotcrete and concrete. Standard features include a protective grill and rubber color. The large hopper (280L) equipped with a splash guard (optional) is effective in preventing concrete splatter. 【Features】 ■ Maximum discharge pressure: 55 bar ■ Maximum discharge capacity: 30 m³/hour ■ Complies with emission standards Stage V ■ Ergonic Output Control (EOC): Discharge control and optimal fuel consumption *For more details, please refer to the "Special Site" below or feel free to contact us.

  • Concrete Machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Stationary concrete pump

Stationary concrete pump

Adaptable to various construction methods! Examples of stationary concrete pump usage and services are included!

This catalog introduces the "stationary concrete pumps" that our company handles. We offer products that are very robust, highly reliable, user-friendly, fuel-efficient, and have a long lifespan. They enable high production in construction, have economical operating costs, and are easy to handle, service, and maintain. Putzmeister continuously trains service technicians, provides a close-knit information network and new equipment, and always strives to meet our customers' needs. Please use this for selecting products. [Contents (partial)] ■ Maximum pumping height / Maximum pumping distance ■ Expertise and support ■ High-rise buildings ■ Bridge construction ■ Underground work *For more details, please refer to the "special site" below or feel free to contact us.

  • Concrete Machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Crawler-type concrete pump BSC1409D PL

Crawler-type concrete pump BSC1409D PL

Self-propelled by crawler type, pile driving work, on-site concrete work, pump for lining concrete work.

The "BSC1409D5 PL" is a crawler-type concrete pump suitable for filling place-driven piles and site-cast concrete work. Since the chassis is mounted on a steel crawler, it can move autonomously, eliminating the need for cranes or transport machinery. Additionally, it can run alongside an earth drill, simplifying logistics on site. Please feel free to contact us when you need assistance. 【Features】 - The chassis is mounted on a steel crawler, allowing for autonomous movement. - Reduces concrete delivery pipes, ensuring high efficiency in concrete filling. - No need for cranes or towing machinery for movement. - Off-Road Law 2014 standard certification (minor exceptions) and EU-STAGE 5 certification. For more details, please refer to the PDF materials or feel free to contact us.

  • Concrete Machinery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Reinforcement construction services

Reinforcement construction services

By being able to streamline the process compared to conventional methods, the cost of rebar work can be reduced!

Our company provides rebar construction services using the prefabricated assembly method. This allows for safe and efficient assembly work, enabling a reduction in the construction process of the structure. By unitizing rebar components in our factory, we can advance the schedule and adequately respond to sites with tight deadlines. Please feel free to contact us if you have any requests. 【Construction Process】 1. In-house factory assembly 2. Collection and storage 3. Transportation to the site 4. Installation at the site *For more details, please download the PDF or contact us.

  • Steel bar construction

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
My Pump Booster Unit 'BP-5N' (Water Supply)

My Pump Booster Unit 'BP-5N' (Water Supply)

Easy to use with an automatic pressure-regulating supply pump! Energy-saving operation allows for a stable supply at 0.5 MPa at all times.

The "BP-5N" is a my pump booster unit equipped with a 200L water storage tank. It can supply a stable pressure of 0.5MPa at all times, unaffected by fluctuations in underground water supply pressure. It provides uniform mixing water without inconsistencies. Additionally, the water storage tank is equipped with a ball valve. Please feel free to consult us when you need assistance. 【Features】 ■ Easy to use with an automatic pressure-regulating pump ■ Provides stable supply of uniform mixing water, ensuring consistency ■ Comes with a 200L water storage tank ■ Energy-efficient operation ■ Equipped with a ball valve in the water storage tank *For more details, please refer to the PDF document or feel free to contact us.

  • image_14.png
  • image_15.png
  • image_18.png
  • image_20.png
  • Water supply facilities

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-lift drainage pump

High-lift drainage pump

High-lift drainage pump for drainage over 20m! Introducing performance curves, dimensional diagrams, and more.

We would like to introduce the high head drainage pumps that we handle. High head pumps are available in types that can be used for drainage heights ranging from approximately 20m to 35m, tailored to match the discharge flow rate. In the PDF materials, you can find performance curves, dimension drawings, dimension tables, and common standard specifications for both 50Hz and 60Hz for the KTV series, KTZ series, and LH series. 【Product Lineup】 ■ KTV Series: Discharge diameters of 50mm and 100mm ■ KTZ Series: Discharge diameter of 100mm ■ LH Series: Discharge diameters of 150mm and 200mm *For more details, please refer to the PDF materials or feel free to contact us.

  • 2023-01-06_13h37_33.png
  • 2023-01-06_13h37_37.png
  • 2023-01-06_13h37_41.png
  • Drainage and ventilation equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultra-high lift drainage pump (drainage)

Ultra-high lift drainage pump (drainage)

Long tunnel, inclined shaft, and vertical shaft drainage! A pump capable of draining up to approximately 160m with a lift of over 40m.

We would like to introduce the ultra-high head pumps that we handle. The ultra-high head pumps are capable of discharging water at a head of 40m or more, up to approximately 160m. They are particularly suitable for drainage in tunnel construction, inclined shafts, vertical shafts, and long-distance relay drainage in main shafts. In the PDF materials, you can find performance curves, dimension drawings, dimension tables, and common standard specifications for 50/60Hz for the LH-W series, LH-6 series, and LH-8 series. 【Product Lineup】 ■ LH-W Series: Discharge diameters of 50mm and 100mm ■ LH-6 Series: Discharge diameter of 150mm ■ LH-8 Series: Discharge diameter of 200mm *For more details, please refer to the PDF materials or feel free to contact us.

  • 2023-01-06_13h37_06.png
  • 2023-01-06_13h37_11.png
  • Drainage and ventilation equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

pumpに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.