pump×古河産機システムズ株式会社：古河機械金属グループ - List of Manufacturers, Suppliers, Companies and Products

pump Product List

1～15 item / All 22 items

Displayed results
Single-stage high-pressure slurry pump "SP2H type"

Single-stage high-pressure slurry pump "SP2H type"

We also offer stainless steel products for corrosion resistance!

The "SP2H type" is a single-stage high-pressure slurry pump designed for the high-pressure and long-distance transport of general slurries. The pump nozzle is of the end-top type. The wetted parts are made of high-chromium cast iron, which is standard for wear resistance, but stainless steel is also available for corrosion resistance. Additionally, the shaft sealing part is standard with a gland packing type, but it can be changed to a mechanical seal type. 【Specifications】 ■ Discharge diameter: 40 to 100 mm ■ Flow rate: 0.1 to 4.5 m³/min ■ Total head: 30 to 70 m *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single-stage high-pressure slurry pump "RSP type (inverse type)"

Single-stage high-pressure slurry pump "RSP type (inverse type)"

It can be used for pressure application in filter presses and for long-distance transportation.

The "RSP Type (Inverse Type)" is a single-stage high-pressure slurry pump. Due to its inverse suction port, it maintains low pressure at the shaft seal area while achieving high-pressure discharge, enhancing sealing performance. The standard shaft seal is a gland packing type, but it can also be changed to a mechanical seal type. The discharge capacity ranges from 0.1 to 1.0 m³/min. 【Features】 ■ Pump for high-pressure, long-distance transport of general slurries ■ Can be changed to a mechanical seal type *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-clogging sludge pump "SPN Series"

Non-clogging sludge pump "SPN Series"

Easy maintenance and surprisingly long-lasting! Smoothly transports handling liquids.

The SPN series is a dedicated pump for transporting a wide range of sludge, waste, and viscous slurries. With a casing that has a large flow area and a specially shaped impeller, the new design allows for smooth transportation of sludge. The materials used for the impeller and front cover are made from a high-chromium cast iron developed independently based on years of extensive experience and achievements, resulting in an incredibly durable structure. 【Features】 ■ No worries about clogging ■ Maintains initial performance ■ No liquid leakage at the gland area ■ Easy disassembly, assembly, and maintenance ■ Requires minimal installation space ■ Excellent wear resistance *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Horizontal Axis Spiral Flow Pump "FSP/SPW Series"

Horizontal Axis Spiral Flow Pump "FSP/SPW Series"

A sturdy structure without waste! It guarantees quiet operation and a long lifespan.

The "FSP/SPW Series" is a horizontal axis spiral vortex pump designed based on fluid theory and hydraulic fundamental experiments. It features a three-dimensional screw-shaped impeller and a casing with a large vortex chamber cross-section, allowing it to smoothly pass through even when mixed with debris or sediment. Additionally, its efficient and robust structure guarantees quiet operation and a long lifespan. 【Features】 ■ High pump efficiency ■ Non-clogging structure ■ High durability ■ Easy maintenance ■ Structure that allows for easy inspection *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pump with solid material crushing mechanism "FD Series"

Pump with solid material crushing mechanism "FD Series"

Reduce total running costs! A pump and crusher combined with crushing and pumping functions!

The "FD Series" is a cutting pump that omits processes such as tanks and pumps, reducing total running costs. This product features an advanced crushing mechanism with four crushing blades, allowing for powerful and uniform crushing of solids. The two-stage sealing mechanism prevents liquid leakage for extended periods. Additionally, it comes standard with inspection ports in two locations: the suction cover and the casing, making maintenance easy. The clearance of the crushing blades can be easily adjusted using an adjustment handle without disassembling the pump. 【Features】 ■ Combines crushing and pumping functions ■ Flexible crushing size with advanced crushing mechanism ■ Extensive grid lineup ■ Excellent durability ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spiral pump "MCIS type / MCHS type"

Spiral pump "MCIS type / MCHS type"

Well-balanced low-noise design and a sturdy structure with no waste.

The "MCIS type / MCHS type" is a vortex pump capable of transporting hot water up to 100°C for clean water applications. The impeller is available in two types: closed type and semi-open type. Additionally, by freely combining the structure and materials of the wetted parts according to the intended use, it can accommodate a wide range of applications from clean water to special liquids, refrigerants, and heat transfer fluids. 【Features】 ■ Wide adaptability ■ Economical ■ High reliability ■ Easy maintenance ■ Impeller available in both closed type and semi-open type *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multistage spiral pump "MR2 type"

Multistage spiral pump "MR2 type"

Outstanding durability and economy! A compact and lightweight pump that is easy to handle!

The "MR2 type" is a multi-stage centrifugal pump designed for clean water, directly connected to a 4-pole motor. This product can achieve a lift of up to 120 meters. Additionally, it is compact and lightweight, making it easy to handle. Furthermore, it boasts excellent durability and cost-effectiveness, along with many other outstanding features. 【Features】 ■ 4-pole motor direct connection, suitable for clean water ■ Achieves a lift of up to 120 meters ■ Compact and lightweight ■ Easy to handle ■ Outstanding durability and cost-effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-priming spiral pump "MS type"

Self-priming spiral pump "MS type"

Robust structure and high self-priming capability industrial pump! You can achieve high efficiency!

The "MS type" is a self-priming vortex pump with unparalleled self-priming performance and high efficiency. This product not only boasts high suction capability but also excels in mechanical reliability, ease of handling, and economic efficiency, making it a high-quality pump. We offer a wide variety of options to meet diverse applications. 【Features】 ■ High suction capability ■ High mechanical reliability ■ Ease of handling ■ Excellent economic efficiency ■ Options available in "standard type," "all iron," and "stainless steel" *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tunnel construction slurry pump "SPD Series"

Tunnel construction slurry pump "SPD Series"

Clear strength and durability! Furukawa's shield construction pumps supporting the shield method.

The "SPD Series" is a shield pump that meets the demands for "robustness" and "durability" required for high water pressure, large cross-section, and long-distance construction at great depths. The newly designed SPD7 series features the Super Hybrid Seal 3, which significantly enhances the pressure resistance performance of the well-regarded Super Hybrid Seal from SPD6. For tunnel construction slurry pumps, we also offer the "FDS Series," a crushing pump that addresses blockage issues caused by soil and clay. 【Features】 ■ High-pressure casing: Combines toughness and wear resistance to withstand great depths and high water pressure ■ High-performance impeller: Pursues high lift, wear resistance, non-blocking, and high efficiency ■ Sturdy shaft and bearings: High reliability and long bearing life ■ High-rigidity frame: Built robustly to reduce vibrations ■ Space-saving: Can be installed in narrow tunnels For more details, please refer to the catalog or feel free to contact us.

  • Bridge Construction
  • Other civil engineering works
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dehydrated cake transport double-acting piston pump "PT Series"

Dehydrated cake transport double-acting piston pump "PT Series"

Powerful & Smart! Piston Pump for Transporting Dewatered Cake at Wastewater Treatment Plants

The "PT Series" is a piston pump developed for transporting dewatered cake, based on the technology of concrete delivery pumps with a proven track record in NATM method concrete spraying machines. It is smartly controlled by a self-designed hydraulic circuit unit for high-pressure delivery using a power piston. It achieves efficient and smooth continuous delivery with a double-acting piston. 【Features】 ■ Sealed piping structure to prevent odor leakage ■ Flexible routing design for piping transport, allowing for transport in narrow spaces ■ Robust design that withstands high pressure, enabling stable operation over the long term ■ Easy maintenance with a hopper opening and closing mechanism ■ Unique mechanism to suppress vibration and noise For more details, please refer to the catalog or feel free to contact us.

  • Piping and insulation
  • Sewerage facilities
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Efficiency Energy-Saving Slurry Pump SPL e-Performance

High Efficiency Energy-Saving Slurry Pump SPL e-Performance

Newly designed e-e impeller adopted! High efficiency, economical, and easy maintenance slurry pump.

The "SPL e-Performance" is a high-efficiency, energy-saving slurry pump that employs a newly developed e-e impeller optimized through CFD analysis of the internal flow within the pump, achieving up to an 11-point improvement in maximum pump efficiency compared to our conventional models. Additionally, it features a design that reduces losses caused by vortices and friction as the slurry passes through components like the impeller, resulting in a maximum reduction of 19% in shaft power, which is a factor affecting power consumption, compared to conventional models. 【Features】 ■ High efficiency ■ Cost-effectiveness, energy saving ■ Long lifespan ■ Easy maintenance For more details, please refer to the catalog or feel free to contact us.

  • pump
  • Tunnel construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low concentration self-priming slurry pump "KP Series"

Low concentration self-priming slurry pump "KP Series"

Ideal for water treatment plants and more! Low-concentration slurry pump with self-priming structure.

The "KP Series" is a slurry pump developed by consolidating half a century of experience and technology, featuring a groundbreaking self-priming structure designed for low concentration applications. It is designed to meet user needs, significantly reducing handling effort as much as possible. It is also very effective for long hours of operation. 【Features】 ■ Excellent maintainability ■ Compatible with low concentration slurries, long lifespan ■ Standard adoption of water-free mechanical seals ■ Choice of connection methods ■ Adoption of oil-free bearings For more details, please refer to the catalog or feel free to contact us.

  • Air compressors, blowers and pumps
  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rubber Liner Type Slurry Pump "LK2 Series"

Rubber Liner Type Slurry Pump "LK2 Series"

Excellent corrosion resistance and wear resistance, enabling reduced maintenance and cost savings!

The rubber-lined slurry pump "LK2 Series" enhances its well-established abrasion resistance and features an acid-resisting liner, making it suitable for acidic environments. Thanks to its rubber liner structure, it can be used for various liquid types, slurry liquids, and wastewater across different industries. Additionally, the back vane and the centrifugal force of the expeller create a depressurization effect that prevents liquid leakage. It excels in abrasion resistance and corrosion resistance, with rubber materials selectable according to the liquid type. The shaft sealing structure can also be chosen based on the liquid type and operating environment, and being fully domestically produced, it offers robust parts supply and after-sales service. 【Features】 ■ The liquid-contacting part has a split liner structure, allowing for the replacement of only the worn components due to abrasion. ■ Gap adjustments can be easily made from the outside, maximizing delivery efficiency while ensuring the impeller is fully utilized without waste. ■ A mechanism is provided to prevent liquid leakage around the rotating shaft during operation and when stopped, offering an optimal combination. ■ The shaft-integrated bearing can be easily disassembled and assembled with just the tightening of a nut. *For more details, please refer to the PDF document or feel free to contact us.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rubber Liner Type Slurry Pump "LK2 Series"

Rubber Liner Type Slurry Pump "LK2 Series"

Excellent corrosion resistance and wear resistance, enabling reduced maintenance and cost savings!

The rubber-lined slurry pump "LK2 Series" enhances its well-established wear resistance and features an acid-resistant liner, making it suitable for acidic applications. Its rubber liner structure allows it to be used with various liquids, slurries, and wastewater across different industries. Additionally, the back vane and expeller create a centrifugal force that prevents liquid leakage. It excels in wear resistance and corrosion resistance, and the rubber material can be selected according to the liquid properties. The shaft sealing structure can also be chosen based on the liquid properties and operating environment. Being purely domestically produced, it offers robust parts supply and outer service. 【Features】 ■ The liquid contact part has a split liner structure, allowing for the replacement of only the worn components due to abrasion. ■ Gap adjustments can be easily made from the outside, maximizing pumping efficiency while ensuring the impeller is used efficiently. ■ A mechanism is provided to prevent liquid leakage around the rotating shaft during operation and when stopped, offering an optimal combination. ■ The shaft-integrated bearing can be easily disassembled and assembled with just the tightening of a nut. *For more details, please refer to the PDF document or feel free to contact us.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low Concentration Slurry Pump "SPP Type"

Low Concentration Slurry Pump "SPP Type"

Low concentration general slurry pump! Can be used for industrial wastewater treatment.

The "SPP type" is a low-concentration slurry pump designed for industrial wastewater treatment with low-concentration general slurries. Due to its simple structure, it has fewer parts, making assembly and disassembly easy. The shaft sealing part is standard with a gland packing type, but it can also be changed to a mechanical seal type. 【Features】 ■ Simple structure ■ Fewer parts ■ Easy assembly and disassembly ■ Can be changed to a mechanical seal type *For more details, please refer to the PDF document or feel free to contact us.

  • pump
  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to pump

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.