更新日： 集計期間:Apr 22, 2026～May 19, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Apr 22, 2026～May 19, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Apr 22, 2026～May 19, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
271～300 件を表示 ／ 全 1841 件
The pump body is made of corrosion-resistant aluminum and reinforced plastic, making it a lightweight and durable pump.
If you have any questions regarding the introduction below, please feel free to contact us.
Ultra-high pressure hydraulic equipment air-driven hydraulic pump
A high-efficiency hydraulic pump that drives the pump with air and simultaneously reuses the exhausted air for the pump's operation.
Ultra-high pressure hydraulic equipment air-driven hydraulic pump
Durable, double-acting air cylinder type one-shot air hydro booster.
Ultra-high pressure hydraulic equipment hydraulic pump
The pump body is made of corrosion-resistant aluminum and reinforced plastic, making it lightweight and highly durable.
High-pressure clamp hydraulic equipment hydraulic pump
This is a continuous discharge hydraulic pump that converts compressed air into high-pressure oil based on the area ratio of the air piston to the hydraulic piston. For more details, please contact us or refer to the catalog.
Compared to conventional products, the handle operation force is reduced by 20%. A newly designed hand pump that has greatly innovated in every aspect.
●We have successfully reduced the latest design concept's handle operation force by 20% compared to conventional models, while ensuring safety and durability, which are the most important factors. ●The extremely light handle operation force has enabled a previously unmatched lightness of feel, allowing for pressurization up to 70MPa.
By adjusting the input air pressure with the air regulator, the hydraulic pressure can be easily adjusted.
The Turbo II Air Driven Hydraulic Pump (Explosion-Proof Type) "PA※G Series (PATG/PAMG/PACG)" is a highly efficient hydraulic pump that drives the pump with air and simultaneously reuses the exhausted air for the pump's drive (turbo). It is available in a foot-operated pedal type for single-acting cylinders and a manual switch valve type that can operate both single-acting and double-acting cylinders. 【Features】 ◯ By adjusting the input air pressure with an air regulator, the hydraulic pressure can be easily adjusted. ◯ The pump comes with a steel mounting bracket. ◯ The 2.1L tank is made of plastic, while the 3.8L tank is made of steel. For more details, please contact us or download the catalog.
This is an air-driven hydraulic pump that increases the input air pressure to 65 times and 123 times hydraulic pressure.
The double action booster pump "ZAJ065/ZAJ123" is a high-efficiency air-driven hydraulic pump that continuously discharges through the reciprocating action of two hydraulic pistons. The high-cycle reciprocating motion of the air and hydraulic pistons allows for continuous hydraulic discharge, and as it approaches the set pressure, the reciprocating motion reduces to a low cycle. When the set pressure is reached, the motion of the air pump automatically stops as the air pressure and hydraulic pressure balance each other. If the hydraulic pressure decreases, the air pump automatically activates to replenish the hydraulic pressure in the circuit. 【Features】 ◯ The air consumption of the pump during balance stop is "zero" → Achieves energy savings with no rise in oil temperature or power loss ○ Increases input air pressure to 65 times and 123 times the hydraulic pressure ○ Hydraulic pressure can be adjusted with an air regulator for input air ○ Oil-free pump that does not require a lubricator for input air ○ If the discharge volume and tank oil volume are insufficient, there is a twin pump type with the discharge volume of two pumps and an effective oil volume of 12 liters. For more details, please contact us or download the catalog.
Lightweight and compact! The built-in sealed bladder tank allows for use in all directions, 360°.
We would like to introduce the 'XC-1201MB / XC-1401MB' that we handle. We offer the "XC-1201MB" compatible with single-acting cylinders and the "XC-1401MB" compatible with double-acting cylinders. It combines the high-power motor drive of an electric pump with the lightweight design of a portable hand pump, allowing for easy handling on-site due to its cordless feature, and it boasts an excellent design. 【Features】 ■ The lightweight body comes with a portable handle and a detachable shoulder strap. ■ The built-in completely sealed bladder tank can be used in all directions, 360°. ■ A powerful battery provides excellent work speed and working time. ■ The pump body is made of highly durable, high-strength fiberglass and reinforced composite materials. *For more details, please refer to the PDF document or feel free to contact us.
High efficiency through innovative design! Precise operation with speed control via dial adjustment.
The "E Series E-Pulse" is an electric hydraulic pump that achieves high efficiency through innovative design, maintaining a constant power output of the motor across the entire pressure range. With speed control via dial adjustment, it accurately operates hydraulic tools and cylinders, and features a pendant and cord winding function for added convenience. It comes standard with a convenient oil filling port, oil level gauge, and automatic breather. 【Features】 ■ High discharge oil volume efficiency relative to operating pressure ■ Stable control enabled by a DC24V power regulator ■ Smooth operation of cylinders and tools with minimal pulsation thanks to six pistons ■ Durable aluminum housing ■ Long lifespan achieved with a high-efficiency permanent magnet direct drive motor *For more details, please refer to the PDF document or feel free to contact us.
Prevents oil leakage during transport and intrusion of dust from the outside! Lightweight and easy to use, hydraulic pump for single-acting cylinders.
The "PA-133 Series" is an explosion-proof air-driven hydraulic pump that can be operated and installed in any directional position. In the case of a single-acting spring return cylinder, simply operating the foot pedal allows the single-acting cylinder to advance, maintain hydraulic pressure after stopping, and then retract. The completely sealed oil tank without an air vent prevents oil leakage during transport and keeps dust from entering from the outside. 【Features】 ■ Lightweight and easy to use ■ The swivel joint at the pump oil outlet facilitates the movement and operation of the pump ■ The completely sealed oil tank without an air vent prevents oil leakage during transport and keeps dust from entering from the outside ■ There are mounting groove holes on the base of the pump *For more details, please refer to the PDF document or feel free to contact us.
The oil tank uses a completely sealed bladder rubber type! The pump can be installed in any direction.
The "XA Series" is a variable displacement type, making it easy to control speed and positioning. It is an explosion-proof rotary air motor-driven hydraulic pump. It generates ultra-high pressure hydraulic fluid, accurately controls the fluid, and realizes the three elements of ergonomics-based operability with Enerpac's XVARI technology. We offer various types and variations, including "models with hydraulic gauges," "valves for double-acting cylinders," "models with 2L oil tanks," and "pedal safety guards." 【Features】 ■ The oil tank uses a completely sealed bladder rubber type. ■ The pump can be used in any installation orientation. ■ A pedal lock is standard equipment at the center of the pump. ■ The foot pedal of the pump can be used without fatigue. ■ The pressure adjustment valve is located on the back of the body, allowing for easy external adjustment. *For more details, please refer to the PDF materials or feel free to contact us.
External proper hydraulic pressure adjustment is possible! A product certified under the European explosion-proof standard ATEX95 that can be used in environments with explosion hazards.
The "ZA4 Series" is a high and low pressure two-stage discharge hydraulic pump equipped with a 3kW rotary air motor. With the pressure adjustment valve included with the manual hydraulic switching valve, proper hydraulic pressure can be adjusted externally. This product is certified to the European explosion-proof standard ATEX95, making it suitable for use in environments with a risk of explosion due to fire or electrical sparks. 【Features】 ■ Equipped with a 3kW rotary air motor ■ Allows for external adjustment of proper hydraulic pressure ■ The heat exchanger can warm the exhaust to prevent pump freezing and further cool the hydraulic fluid (optional) ■ All models come standard with an oil level gauge in the reservoir tank *For more details, please refer to the PDF materials or feel free to contact us.
ATEX certified to meet operational environment compliance requirements! Suitable for use in tight scaffolding and work passages.
The "LAT Series" is a hydraulic pump that can be operated solely by air in harsh work environments that require explosion-proof performance. It has a mass that can be carried by one worker and a compact shape, making it suitable for use in narrow or cramped scaffolding, work passages, pipe racks, and lifts. Additionally, the hydraulic pump with a three-piston design achieves the highest level of tightening and loosening speed, allowing for cost reduction without delaying work. 【Features】 ■ ATEX certified, meeting work environment compliance requirements ■ Mass that can be carried by one worker and a compact shape ■ Standard roll cage to protect air equipment and the pump body ■ Pendant switch operable by air with a 4.5m cord ■ Equipped with a certified 100mm calibrated gauge *For more details, please refer to the PDF document or feel free to contact us.
All equipment operates seamlessly without interruption! A case study in public infrastructure construction projects.
The KiwiRail project by Downer will permanently improve the country's major trunk railway network, allowing for the transportation of more freight. The Enerpac PUJ-1201E hydraulic electric pump is equipped with a two-stage pump operation to reduce cycle times and enhance productivity. It was used in combination with the Enerpac thin lock ring cylinder, which is employed to support the load of the cantilever section. "The name Enerpac is synonymous with safety and reliability. All the equipment provided for the project functioned seamlessly without interruption," we have received this feedback. [Case Overview] ■ Customer: Downer, Jonel Hydraulics (New Zealand) ■ Products: RCH and RC series cylinders, ZE, ZU, and PUJ series pumps ■ Results: All functioned normally without failure *For more details, please refer to the PDF document or feel free to contact us.
High performance and high efficiency! Equipped with a manual valve model, capable of controlling the speed of tools and cylinders.
The "XC2 Series" is a cordless hydraulic pump equipped with a high-performance brushless motor that enhances productivity with high flow rates and achieves durability twice that of brush motors. Being cordless eliminates the need for extension cords and generators that produce noise and exhaust. The model with a 4-liter oil capacity can be used for high-capacity applications or multiple cylinders. It is compatible with the Enerpac Connect app, allowing access to tool and work information. 【Features】 - Cordless, eliminating the need for extension cords and generators that produce noise and exhaust - Sealed oil tank design prevents leaks and allows use in any orientation - The model with a 4-liter oil capacity can be used for high-capacity applications or multiple cylinders - Compatible with the Enerpac Connect app for access to tool and work information *For more details, please download the PDF or feel free to contact us.
Continuous control of expulsion is performed, allowing for accurate high-speed and low-speed control.
The "TXV" discharges only the necessary amount of oil for each operation through load sensing, controlling the maximum pressure. As a result, compared to fixed displacement pumps, it eliminates overheating of the hydraulic oil and reduces noise. Since only the required power is used, it extends the lifespan of the equipment and reduces energy consumption, making it an environmentally friendly system overall. Accurate operation is possible as the appropriate amount of oil is continuously controlled, whether the movement is fast or slow. 【Applications】 Forestry machinery, garbage collection vehicles, de-icing agent spreaders, construction vehicles, etc. 【Main Features】 ○ Compact design allows direct attachment to PTO ○ Prevention of hydraulic oil overheating ○ Reduction of energy consumption ○ Low pulsation, low noise ○ High pressure ○ High self-priming performance, etc. ● For more details, please contact us or download the catalog.
Aluminum body gear pumps and many other items listed!
In the Casappa general catalog of TOHTO Corporation, we offer a wide range of products tailored to various applications, including the aluminum body gear pump motor "POLARIS Series," the cast iron body gear pump motor "POLARIS 'PH' Series," and the aluminum body gear flow divider "POLARIS Series." 【Featured Products】 ○ Aluminum body gear pump motor ○ Cast iron body gear pump motor ○ Aluminum body gear flow divider ○ Cast iron body gear flow divider ○ Fixed displacement axial piston pump motor For more details, please contact us or download the catalog.
It protects the circuit from overload pressure with two built-in relief valves.
The "S6CV" series is a variable displacement piston pump for closed circuits. This pump is of the swash plate type and can optionally be equipped with a through drive. This type of pump is specially designed for hydraulic transmissions in closed circuits. The pump discharge flow is proportional to the shaft speed and the angle of the swash plate. The discharge increases as the angle of the swash plate increases from zero to maximum. Since the angle of the swash plate tilts to the opposite side as it passes through zero, the direction of the pump discharge also changes. With the new design, the maximum operating pressure can reach up to 400 bar (5800 psi). 【Features】 - Various control options available - Equipped with two built-in relief valves to protect the circuit from overload pressure - Built-in gear-type charge pump with three selectable discharge volumes - Multiple accessories can be attached (hydraulic compensators, electric cut-off valves, flushing valves, etc.) - The shaft can withstand a constant radial and axial load - Comes with an externally operable maximum discharge limit mechanism - Pumps in this series can be installed in any orientation ● For more details, please contact us or download the catalog.
"MD10V" series made of aluminum housing
The "MD10V 14/18" is a variable displacement axial piston pump for closed circuits, with an aluminum housing. The discharge volume is variable and determined by the angle of the swash plate. The direction of oil flow is bi-directional. Each pump is equipped with a built-in feed pump to compensate for internal leakage and maintain the main circuit, as well as to generate control pilot pressure. All pumps come with a preset relief valve and can supply either single or double pumps. 【Features】 ○ The following controls are possible: - Manual control (without spring center) - Manual control (spring return type) - Electric impulse control, etc. ○ Two options and two types of external pump mounting through-drive options: - Pressure filter - Through-drive Bosh Gr.1 / Gr.2 - Through-drive SAE “A” 9T - 16/32 - DP ○ The shaft is equipped with bearings to withstand both radial and axial loads. ○ Can be mounted in any direction. ● For more details, please contact us or download the catalog.
For truck applications! This high-pressure series can be used at a maximum instantaneous pressure of 500 bar for all types! It is resistant to contamination and suitable for harsh environments!
The "PA/PAC/PAD" series consists of piston pumps made up of three ranges. All types can be used for truck applications, with a continuous operating pressure of 5800 psi (400 bar) and a peak pressure of 7252 psi (500 bar)! Thanks to its unique design, it provides a robust solution and long lifespan for high-pressure hydraulic applications in trucks. 【Features】 ○ Three types for high-pressure truck specifications - PA: Single flow/twin flow (supports different flow rates) - PAC: The most compact in the series, single/twin flow - PAD: Low pulsation with 10 pistons, compact, twin flow (supports different flow rates) ○ Unique design allows for use in clockwise/counterclockwise rotation without any action required from the customer ○ Two shaft seals positioned at the front of the pump - Outer: Designed to withstand high temperatures from the gearbox - Inner: Matches the requirements for hydraulic shaft seals ○ Flexible tube to discharge dirt and high-pressure wash water that passes through the outer seal ○ High efficiency with a volumetric efficiency of over 90% proven in testing labs ● For more details, please contact us or download the catalog.
Capable of handling various fluids without noise! An ideal transfer pump for lubrication, filtration, and cooling.
The "2VHL Continuum Series" is a transfer pump designed to handle various fluids without noise. It features a helical rotor from the highly efficient pump "Continuum," which boasts excellent noise-free and energy-saving performance. It is optimal for processing medium to high-viscosity fluids, and its dimensions and flange are designed to be compatible with existing gear pumps. 【Features】 ■ Smooth pressure increase ■ High-efficiency operation ■ Noise-free operation ■ Energy-saving effect *For more details, please refer to the PDF document or feel free to contact us.
Compact and lightweight, can be carried with one hand, powered by AC100V, and features an adjustable discharge volume mortar pump! Ideal for small injections and spraying!
Compact, lightweight, high-performance mortar pump with excellent discharge capacity! 【Features】 1. Compact, lightweight, and high performance Achieves a 45% reduction in weight and a 68% increase in discharge capacity compared to our conventional models. Designed for one-handed portability, suitable for urban construction with space constraints. 2. Discharge volume can be adjusted continuously with AC100V power supply Allows for various construction methods with stepless volume adjustment. 3. One-touch band system for securing discharge and suction couplings! Contributes to reduced labor during maintenance such as tube replacement! Tube replacement videos for the same product are available on the Okasan Kikou YouTube channel. 4. Options for vertical, horizontal, and hopper configurations Multiple layout variations are available for installation with a hopper. *For more details about the product, please feel free to contact us. Okasan Kikou Co., Ltd. Official Website http://www.okasankikou.co.jp/
A small mortar pump with a hopper. The discharge amount can be freely adjusted even with a 100V power supply! There are two types available for injection and spraying applications!
There are variations focused on pressure for spraying applications and on discharge volume for grout injection, allowing for selection according to the intended use.
![Inverter Variable Speed Grout Injection [Mortar Pump] OKG-35E](https://image.www.ipros.com/public/product/image/be7/2000099711/IPROS99500171261017565155.png?w=280&h=280)
A versatile mortar pump capable of handling various construction methods such as grout injection and mortar spraying!
The mortar pump allows for a wide range of adjustments with a minimum discharge of 3.8 to a maximum of 45.0 L/min, and a maximum discharge pressure of 3.5 MPa, thanks to its inverter variable speed. It can be used for various construction methods, including grout injection for seismic reinforcement, PC grout injection for bridge superstructures, and mortar spraying for cross-section repairs. This versatile machine can perform multiple roles, enabling a reduction in the number of units required. 【Features】 ■ Equipped with an inverter ■ Maximum discharge pressure: 3.5 MPa ■ Discharge volume: Minimum 3.8 - Maximum 45.0 L/min ■ Compatible with a wide variety of materials ■ Remote control, hoses, pressure gauges, and other products can be shared with our company’s products *For details, please download the PDF or contact us.
◆Dedicated design for integration into residential foundation improvement plants◆
◆Feature 1◆ Pursuit of compact size, lightweight, and high functionality ◆Feature 2◆ Standard equipped with emergency operation mode EDM during inverter errors ◆Feature 3◆ Options for safety and multifunctionality are available for selection
Engine mixer for cement milk production, ideal for small-scale semi-flexible pavement construction.
■Feature 1: Mixing, transporting, and spreading can be consolidated into one machine. ■Feature 2: Conventional hand mixers, mixing buckets, carts, and generators are not needed. ■Feature 3: It adopts the OKASAN-RING (Patent No. 4981003), which ensures uniform mixing without inconsistencies.
Achieves stable discharge with an integrated electric agitator.
Ideal for small-scale slope and embankment repairs! Agitator-integrated mortar spraying pump OKG-75ME-A Would you like to use a mortar pump for the repair of small-scale slopes to solve the following issues? 【Common problems with conventional mortar spraying plants】 1. The road in front of the slope is narrow, making it impossible to install the plant. 2. I want to set up the plant and close the road, but there are no alternative routes for traffic. 3. Noise and dust control measures are necessary due to the proximity of residential houses. 4. The transportation costs for bringing in and out the plant equipment are high. 5. Private slope repair work is small-scale, making it cost-prohibitive. Using fresh mortar increases material costs, but the reduced number of equipment can lead to cost savings. ★ Adoption points, pouring volume, slope height, etc. are included. 1. Slope repair work where two-way traffic is not possible and cannot be closed. 2. Slope repair work near residential houses requiring dust and noise control measures. 3. Slope preservation work where the road width in front is too narrow for two-way traffic. 4. All equipment can be transported in and out with one 4-ton unic truck. 5. Slope preservation work where there is no space to mix on-site next to the railway. 6. Private slope repair work in areas densely populated with residential houses.
![IPROS10382629569681387356_140x140[1].png](https://image.www.ipros.com/public/product/image_extension/dd1/666248/IPROS6340158274236619181.png?w=280&h=280){kind=small}
![IPROS13762861094041195468_140x140[1].png](https://image.www.ipros.com/public/product/image_extension/cbe/666249/IPROS8436227463434631802.png?w=280&h=280){kind=small}
![IPROS11448356236977977824_140x140[1].png](https://image.www.ipros.com/public/product/image_extension/e6d/666250/IPROS1303266673159331413.png?w=280&h=280){kind=small}
![IPROS5080913690952187819_140x140[1].png](https://image.www.ipros.com/public/product/image_extension/cb0/666251/IPROS8398789358517208848.png?w=280&h=280){kind=small}
A double arm that rotates in the opposite direction for materials that take time to mix! A mortar mixer that can be used for "on-site mixing" with fast-setting, early strength, and high-strength mortars!
Our company is a specialized manufacturer of machines for the civil engineering and construction industry, focusing on "mixing and delivering" equipment such as mortar pumps and grout mixers. We offer a wide range of mortar pumps and mixers, providing products that cater to various civil engineering and construction methods. In particular, the Double Arm Mixer STW Series excels with special mortars that are highly viscous, have low water content, or contain a lot of fibers, as it features outer and inner blades that rotate in opposite directions to forcibly move the materials. Currently, in addition to the Double Arm Mixer STW Series, we are also offering a comprehensive catalog of on-site mortar mixers, including the latest model, the High-Speed Mortar Mixer STH Series, free of charge.
A wide range of products is available to match various civil engineering and construction methods, including small cross-section repair mortar spraying.
Our company is a specialized manufacturer of machines for the civil engineering and construction industry, focusing on "mixing and delivering" equipment, primarily "mortar pumps" and "grout mixers." In particular, we offer a wide range of mortar pumps with products that match various civil engineering and construction methods. We are currently providing a "Method Variation Catalog" that summarizes proven "methods" using mortar pumps based on discharge volume and pressure, allowing you to identify the compatible models. [Introducing the categories of methods featured in the catalog] ■ Resin injection ■ Stone masonry repair mortar injection ■ Box culvert injection ■ Small cross-section repair mortar spraying ■ Seismic reinforcement non-shrink grout injection ■ Ceramic-based fireproof coating material spraying ■ Bridge PC grout injection ■ Large cross-section repair mortar spraying ■ Seismic mortar injection for power poles, telegraph poles, and electrified poles ■ Liner plate backfill mortar injection ■ Slope and embankment mortar spraying ■ Ground anchor and rock bolt injection ■ Pipe rehabilitation backfill grout injection ■ Residential foundation and ground improvement ■ Tunnel and thrust backfill grout injection *For more details, please refer to the materials. Feel free to contact us with any inquiries.
