mortar Product List and Ranking from 106 Manufacturers, Suppliers and Companies

Cross-section repair material RF thick application mortar

Even if you chase and layer it on, it can be applied thickly without difficulty! It excels in various performances such as compression and waterproofing.

"RF Thick Coating Mortar" is a polymer cement mortar for thick repairs that contains nitrite-based rust prevention materials, consisting of the premixed powder "RF Thick Coating Powder" and the SBR latex additive "RF Thick Coating Additive." It is used as a repair material for restoring the cross-section of concrete defects (backfill material), as a substrate leveling material, and as a surface coating material based on polymer cement, primarily applied using trowel techniques. It excels in thick application properties and is suitable for restoring the cross-section of exposed rebar defects due to its inclusion of rust prevention materials. 【Features】 ■ Can be applied in layers without sagging, allowing for thick application ■ Excellent in various performance aspects such as compressive strength, flexural strength, waterproofing, and adhesion ■ Superior rust prevention for rebar due to the effectiveness of nitrite-based rust prevention materials *For more details, please refer to the PDF document or contact us.

Company：太平洋マテリアル
Price：Other

Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pacific FT Mortar for Large Format Floor Tiles

Consistent production in a factory with excellent quality control! Compliant with the construction work standard specification JASS 19 M-101.

"Pacific FT Mortar" is a polymer cement mortar specifically designed for large-format tiles, incorporating re-emulsified powdered resin. It complies with the construction work standard specification JASS 19 M-101 (Quality standards for cement mortar for large floor tile installation), offering excellent filling properties and adhesion, making it suitable for large floor tiles. Additionally, it is consistently produced in a factory with superior quality control, ensuring stable quality at all times. 【Features】 ■ Excellent filling properties ■ High adhesion strength ■ Superior adhesion to tiles *For more details, please download the PDF or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Premixed mortar
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Milk, Air Mortar Preform Method

Convenient when there are restrictions on construction conditions, such as frequent movement! It can also be easily done for injection work on the road.

The "Preform Method" involves transporting freshly mixed mortar, prepared at a concrete plant with a specified mix, to the site, where it is combined with bubbles produced by a bubble generation device and mixed/manufactured within a truck mixer. This method is convenient and easy to use, especially in narrow sites without a plant yard or in situations with mobility constraints. 【Features】 ■ Bubbles produced by a bubble generation device are mixed and manufactured within the truck mixer. ■ On-site construction is also possible. ■ Convenient and easy to use when there are constraints on construction conditions. *For more details, please refer to the PDF materials or feel free to contact us.

Company：エースコン工業
Price：Other

Civil Engineering Method
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eco-friendly 'Eco Grout' that is low-carbon and considerate of the environment.

A pre-mixed material (pre-mixed mortar) that can achieve the specified strength simply by adding water and mixing on-site.

Stable strength can be achieved regardless of the operator's skill level, contributing to quality control. Features: 1. Low carbon and environmentally friendly By incorporating fly ash from coal-fired power generation instead of Portland cement as a material, CO² emissions are reduced by 30%. 2. Formaldehyde emission grade F☆☆☆☆ As a product registered with formaldehyde emission grade F☆☆☆☆, it can be safely used indoors. 3. Non-bleeding and non-shrinkage By incorporating special expansion materials, it is non-bleeding and non-shrinkage, preventing the occurrence of voids after curing. 4. High fluidity It has excellent fluidity, allowing it to fill every corner. 5. Non-metallic aggregate Since non-metallic aggregates are used, there is no risk of rust formation. 6. Premixed type By simply mixing with the specified amount of water on-site, a stable quality non-shrink mortar can be obtained.

Company：太陽エコブロックス本社　企画室
Price：Other

grout
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed curing type non-shrink mortar "Filcon S Super"

It has excellent fluidity and can fill complex shapes and voids, such as those in chiseled concrete, thoroughly.

It is a high-speed, rigid, non-shrink mortar that develops strength within hours, making it ideal for urgent construction under time constraints or while traffic is open. Additionally, long-term strength is also consistently achieved.

Company：住友大阪セメント
Price：Other

Premixed mortar
Plastering and painting work
grout
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and heat suppressing type non-shrink mortar "Filcon TF"

Since the temperature stress of the material decreases, temperature cracking is suppressed.

Filcon TF is a non-shrink mortar with hydration heat suppression. It is ideal for pouring large member cross-sections where temperature stress cracking due to hydration heat of cement is a concern, as well as for pouring in hot weather.

Company：住友大阪セメント
Price：Other

Premixed mortar
Plastering and painting work
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed rigid non-shrink mortar NEW Filcon M

Emergency construction, requiring early traffic opening for manhole raising. NEW Filcon M.

Ultra-fast hardening non-shrink mortar NEW Filcon M is an ultra-fast hardening non-shrink mortar that achieves practical strength in a short time. It has excellent fluidity, allowing it to reach narrow spaces and fill them reliably. Since there is no bleeding at all, there is no worry about leaving voids after filling. For more details, please contact us or refer to the catalog.

Company：住友大阪セメント
Price：Other

Premixed mortar
Manhole body
Plastering and painting work
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High fluidity non-separating mortar Filcon 300W

We can carry out grouting work with uniform quality.

High fluidity non-separating mortar Filcon 300W has low suspension in seawater and river water, allowing for grouting work of uniform quality. It excels in pumpability and self-leveling properties. For more details, please contact us or refer to the catalog.

Company：住友大阪セメント
Price：Other

Premixed mortar
Plastering and painting work
grout
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed hard lightweight sectional repair material Lion GRLC-J

For the cross-sectional repair of defective concrete structures. Lightweight polymer cement mortar.

The ultra-fast hard lightweight sectional repair material, Lion GRLC-J, is primarily composed of a special inorganic material based on ultra-fast hard cement, and is a lightweight polymer cement mortar that includes high-performance special powdered resin and special short fibers pre-mixed. For more details, please contact us or refer to the catalog.

Company：住友大阪セメント
Price：Other

Ready-mix concrete
Reinforcement and repair materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Polymer cement-based spray material Refre G Shot

A polymer cement mortar with excellent pumpability and thick application properties.

Polymer cement-based spray material Refre G Shot is a polymer cement mortar that excels in pumpability and thickness application. By simply mixing it with the specified amount of water on-site, a stable polymer cement mortar can be produced. It has minimal rebound and sag during spraying, and can be applied in thicknesses of up to approximately 30mm at once on ceiling surfaces. For more details, please contact us or refer to the catalog.

Company：住友大阪セメント
Price：Other

cement
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and heat suppressing non-shrink mortar "Low Carbon Filcon TF"

Industry first! Low-carbon cement material that reduces CO2 emissions by 32% compared to conventional products.

The low-carbon Filcon TF is a non-shrink mortar that incorporates latent hydraulic materials with extremely low CO2 emissions during production into a portion of the raw cement, achieving a 32% reduction in overall CO2 emissions compared to conventional materials from our company. It can be proposed as a CO2 reduction measure in technical proposals for comprehensive evaluation systems, such as environmentally considerate design for structures (CASBEE). Our material technology is utilized, allowing for a reduction in CO2 emissions while maintaining nearly the same physical performance as conventional products.

Company：住友大阪セメント
Price：Other

Mortar and plaster materials
Premixed mortar
Plastering and painting work
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exterior base adjustment material for wooden structures, lightweight pre-mixed mortar, Fujimor.

New lightweight pre-mixed mortar for wooden buildings that can be applied with a brush and pumped.

The exterior base adjustment material, Fujimoru, is a new lightweight pre-mixed mortar for wooden structures that can be applied with a brush and pumped. It is ideally formulated with Portland cement, special lightweight aggregates, special fibers, and admixtures to exhibit excellent performance, while also allowing for the use of a wooden trowel, making it exceptionally workable. Compared to sand mortar, it reduces the occurrence of cracks. With about half the weight of sand mortar, it places less load on the substrate, making transportation and application easier. A thickness of 16mm can be applied in one day, which shortens construction time. Its thermal conductivity is extremely low compared to sand mortar, making it effective in preventing condensation. As a pre-mixed product produced in a controlled factory environment, it ensures stable quality and eliminates the need for mixing management on-site. It is certified for fire-resistant structures, with a 45-minute and 1-hour fire-resistance designation. For more details, please contact us or refer to the catalog.

Company：富士川建材工業
Price：Other

Premixed mortar
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mortar for finishing concrete foundation surfaces - Mortar for foundations

This is an introduction to mortar for finishing the concrete foundation surface of general wooden buildings.

Mortar for finishing concrete foundation surfaces. Foundation mortar can be brushed on and reduces cracks. It also has good adhesion and workability. For wall surfaces, please use the fire-resistant and quasi-fire-resistant certified products Rasumoru and Fujimoru. Fujikawa Building Materials Industry Co., Ltd. is aware of its responsibility as a company that plays a role in the construction and civil engineering industries, and under strict self-discipline, we have been striving for product development that contributes to "creating work in the industry" based on the technical skills we have cultivated over many years. High quality and the trust of our customers are our pride. We also intend to actively cooperate with the activities of the Architectural Institute of Japan, the Japan Society of Architectural Finish, universities, and public research institutions, and contribute to the overall development of the industry. For more details, please contact us or refer to our catalog.

Company：富士川建材工業
Price：Other

Mortar and plaster materials
Premixed mortar
Plastering and painting work
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exterior substrate adjustment material high-performance premixed mortar Fuji Light #20

This is a new premixed mortar that balances high performance and good workability.

The high-performance premixed mortar Fuji Light #20 is a new premixed mortar that balances high performance and excellent workability to meet the needs of the times. It has good adhesion, low water absorption, and low permeability, making it a high-performance mortar. The use of special admixtures results in low shrinkage and strong adhesion, making it less prone to cracking. With carefully selected particle size distribution, aggregate shape, and the use of special admixtures, it offers excellent trowel spread and cut-off, providing outstanding workability. As it is a pre-mixed product manufactured in a controlled factory environment, the quality is stable and site management is easy. It allows for thin application, which shortens construction time. It is a safe non-asbestos product (non-asbestos). For more details, please contact us or refer to the catalog.

Company：富士川建材工業
Price：Other

Plastering base material
Premixed mortar
Plastering and painting work
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Civil engineering materials LCC mortar for injection and pouring TN-170J

It can be used as filling material for steel plate roll-formed products and as filling material for PC board joint sections.

Civil engineering material LCC mortar for injection and pouring, TN-170J, uses special aggregates and is a lightweight type compared to conventional mortars. In addition to long-term strength (compressive and adhesive strength), its durability is reliable over the long term because it is based on cement. There are no phenomena such as floating water, shelf drop, or material separation. It has excellent non-shrink properties, making it optimal as a grout material. It has excellent fluidity, good filling properties, and can fill without any voids. Surface finishing with a trowel is also satisfactory. Since it is a pre-mixed mortar, there is no hassle of mixing on-site or risk of formulation errors. Just add water and mix, and the work can be completed easily and quickly. For more details, please contact us or refer to the catalog.

Company：富士川建材工業
Price：Other

Mortar and plaster materials
Premixed mortar
Plastering and painting work
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lightweight Fast-Hardening Fiber-Reinforced Polymer Cement Mortar "Magical SP-3"

Less strain on the shoulders, maintaining pressure with the trowel for speed! Achieving excellent rapid hardening and workability.

Magical SP-3 is the ultimate labor-saving repair material that demonstrates excellent workability, which could not be achieved with a single material in plastering work, thanks to special viscosity adjustment that enhances trowel spread and release, as well as its lightweight nature. It places less burden on the shoulders, allowing for stable work quality with a single coat thickness of 5 to 30 mm while maintaining trowel pressure during ceiling and wall construction. It has excellent rapid hardening properties, reaching practical strength in a short time, and can secure over 30 minutes of usable time even in a 30°C environment. 【Features】 - Outstanding workability - Rapid hardening with a long usable time - Excellent various performances - Compliant with the NEXCO Construction Management Guidelines "Performance Verification Items for Section Repair Using Plastering Method" For more details, please contact us or download the catalog.

Company：日本ジッコウ
Price：Other

cement
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super Non-Shrink Mortar 'TJ Attack Sepamol Z-100'

For repairing cold joints and construction joints! A special mortar suitable for multiple purposes.

The "TJ Attack Separomol Z-100" is a water-mixed type (premix) ultra non-shrink mortar that only requires mixing with water. It excels in early strength, demonstrating high durability due to its high strength and high density. The hardened material is non-shrink and has high adhesion, making it excellent in durability and water resistance (waterproofing). It has high thixotropic properties (resistance to sagging) on vertical surfaces, and the workability for trowel applications such as V-cut sections and bean board sections (with a single coat thickness of 50mm) is also good. 【Features】 ■ Premix type that only requires mixing with water ■ Excels in early strength, demonstrating high durability due to high strength and high density ■ The hardened material is non-shrink and has high adhesion, making it excellent in durability and water resistance (waterproofing) ■ After curing, the shrinkage over time is minimal, and almost no cracking occurs ■ Good workability for trowel applications such as V-cut sections and bean board sections (with a single coat thickness of 50mm) *For more details, please refer to the PDF document or feel free to contact us.

Company：日本ジッコウ
Price：Other

Cement mortar coating
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water Supply Facility Corrosion Protection and Waterproofing System Inorganic Coating Method Z Mortar S-T

Non-polymer, non-fiber type

▼Features of S-T Non-Polymer, Non-Fiber Type Z Mortar S-T is a special cement-based corrosion and waterproofing material that does not contain polymer mixing liquids or fibers. It can be applied in facilities that have regulations for non-polymer and non-fiber materials. It is mainly applied to sealed water tanks. ▼Characteristics 【Water Quality】 Meets the leaching test methods and standard values of the Ministry of Health, Labour and Welfare and JWWA Z 108:2016, making it suitable for application on the inner surfaces of concrete water supply facilities. 【Workability】 Can be applied in a single spray or trowel application with a thickness of approximately 10mm to 20mm on vertical surfaces. The rebound loss during spraying is minimal, and trowel application is also favorable. 【Curing Properties】 Exhibits excellent early strength and good workability, allowing for shortened construction periods. At 28 days of age, it demonstrates a compressive strength of over 50N/m², providing stable strength equivalent to or greater than that of concrete. 【Durability】 The cured material is dense and has low permeability, exhibiting excellent durability and wear resistance.

Company：日本ジッコウ
Price：Other

Water Supply Facilities
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fiber-reinforced sulfuric acid-resistant mortar Z Mortar AR, AR2, BR

Long-term adhesion stability confirmed cross-section repair method with the company's anti-corrosion coating technology.

The cross-section repair work is a very important process for ensuring the long-term adhesion stability of anti-corrosion coating methods. We have confirmed the adhesion stability performance of all anti-corrosion coating methods in our lineup and confidently promise the restoration of the functionality of the target water tank. ▼ Lineup Z Mortar AR… Fiber-reinforced acid-resistant mortar (for thick application) Z Mortar AR2… Fiber-reinforced acid-resistant mortar (for thick application) Z Mortar BR… Fiber-reinforced acid-resistant mortar (for thin application)

Company：日本ジッコウ
Price：Other

Sewerage facilities
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed rigid non-shrink mortar 'NEW Filcon M'

We offer two types according to the temperature! It can reach narrow spaces and ensure reliable filling.

"NEW Filcon M" is a super-fast hardening, non-shrink mortar that achieves practical strength in a short time. It has excellent fluidity, allowing it to reach narrow spaces and fill them reliably. This product is a pre-mixed item with sand already blended in. By simply adding water and mixing, the specified performance can be achieved. 【Features】 ■ Achieves practical strength in a short time ■ Excellent fluidity ■ No bleeding occurs at all ■ No need to worry about leaving voids after filling ■ Two types available according to temperature *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar "Filcon R"

Achieves practical strength in 1 to several days! Capable of filling complex-shaped voids thoroughly.

"Filcon R" is a non-shrink mortar that excels in fluidity and can fill complex-shaped voids thoroughly. It steadily increases in strength after one week of curing, achieving sufficiently high structural strength. We offer a pre-mixed type with sand already blended and a cement type without sand, allowing for a variety of formulation designs tailored to cost and construction needs. 【Features】 ■ Excellent fluidity ■ Stable strength increase after one week of curing ■ Achieves sufficiently high structural strength ■ No bleeding or settling ■ Ensures no voids remain after filling, allowing for reliable load transfer *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and heat suppressing non-shrink mortar "Dust-proof Filcon TF"

Special dust-proof agents are used during manufacturing! In mixing and injection work with non-shrink mortar, it is possible to reduce the dispersion of dust.

"Anti-Dust Filcon TF" is a special non-shrink mortar designed to improve working environments on-site. Compared to regular non-shrink mortars, it reduces dust generation during bag disassembly and mixing by over 90%. It helps to minimize dust dispersion during mixing and injection work of non-shrink mortar in places where ventilation is difficult, such as indoors and underground. 【Features】 - Achieves dust prevention while maintaining the quality of the conventional "Filcon TF," including non-shrink and hydration heat suppression properties. - Uses a special dust-reducing agent during manufacturing, which is mixed in to achieve dust prevention. - Reduces dust dispersion during mixing and injection work of non-shrink mortar in places where ventilation is difficult, such as indoors and underground. *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and heat suppressing non-shrink mortar 'Low Carbon - Filcon TF'

Temperature stress is reduced, making it possible to suppress temperature cracking! Low-carbon cement material that reduces CO2 by 32% compared to conventional materials.

The "Low Carbon Filcon TF" is a non-shrink mortar oriented towards a low-carbon society, which incorporates latent hydraulic materials with extremely low CO2 emissions during production as part of the raw material cement, resulting in a 32% reduction in total CO2 emissions compared to conventional materials from our company. As the consideration for environmental design in structures (CASBEE) becomes more common, the ability to reduce the CO2 emissions of the filling materials, which account for a significant volume in seismic retrofitting and other applications, provides a substantial advantage when evaluating the environmental consideration of construction projects. Furthermore, by leveraging our material technology, we have successfully reduced CO2 emissions while maintaining nearly all of the physical performance of conventional products. 【Features】 ■ Suppression of temperature cracking due to hydration heat ■ Excellent filling ability ■ Reliable load transfer ■ Stable strength development *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and heat suppressing non-shrink mortar 'Filcon TF'

Excellent fluidity allows for complete filling of complex-shaped voids! The temperature rise of the components will be minimized.

"Filcon TF" is a non-shrink mortar with hydration heat suppression properties. It is suitable for pouring large member cross-sections where temperature stress cracking due to hydration heat is a concern, as well as for pouring in hot weather. Temperature stress cracking is less likely to occur when the temperature rise of the member due to hydration heat is small. By adding hydration heat suppression functionality to the mortar, we can effectively reduce temperature stress cracking. 【Features】 ■ The rate of hydration heat generation is lower compared to general non-shrink mortars. ■ The heat dissipation efficiency significantly improves during temperature rise due to hydration heat, resulting in a smaller temperature increase of the member. ■ The temperature stress of the member decreases, allowing for the suppression of temperature cracking. ■ There is no bleeding or settlement, ensuring that no voids are left after filling, which allows for reliable load transfer. *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar for pads "Filcon Pad"

Excellent moldability! It demonstrates stable adhesion strength to liner plates, existing concrete, and more.

"Filcon Pad" is a non-shrink mortar for pads that demonstrates stable strength development over a long period. It excels in moldability, allowing for the rapid installation of pads during machinery installation work and the setting of steel column foundation bases. Additionally, by mixing within the specified water volume range, it maintains stable non-shrink properties. 【Features】 ■ Demonstrates stable adhesion strength to liner plates, existing concrete, etc. ■ Excels in moldability, enabling the rapid installation of pads during machinery installation work and the setting of steel column foundation bases. ■ Shows stable strength development over a long period. *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-strength non-shrink mortar "Filcon H" for rapid hardening.

Long-term strength is also stably exhibited! Suitable for emergency construction under time constraints or while traffic is open.

"Filcon H" is an ultra-fast-setting, high-strength, non-shrink grout material that exceeds 40 N/mm² within 2 to 6 hours after placement. It is suitable for emergency construction under time constraints or while maintaining traffic flow. Additionally, it exhibits stable long-term strength. With excellent fluidity, it can fill complex shapes and voids, such as those in chipped concrete, thoroughly. 【Features】 - Maintains stable non-shrink properties through mixing within the specified water range, facilitating load transfer between structures. - No bleeding occurs at all, eliminating concerns about leaving voids after filling. - A type with special short fibers is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-toughness spray polymer cement mortar "Refle Mortar D"

Exhibits stable strength over a long period! Excellent adhesion, allowing integration with existing concrete.

"Refremolset D" is a polymer cement mortar that possesses a large strain capacity by adding high-strength, high-elasticity special organic short fibers into the mortar. It has low shrinkage comparable to that of standard section repair materials and maintains stable strength over the long term. Additionally, because it contains special organic short fibers, it disperses cracks that occur when bending or tensile loads are applied to existing concrete, reducing the width of the cracks. 【Features】 ■ Stable strength development ■ Low shrinkage ■ Excellent adhesion ■ Crack dispersion ■ Easy to apply *For more details, please refer to the PDF materials or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Natural soil environment weed control paving material "Magunaito"

Tedious grass cutting and weeding! Magnetite solves your weed problems!

"Magunaito" is an environmentally friendly natural soil paving material made by mixing magnesium extracted from natural seawater with sandy soil. The hardening agent reacts with water to solidify, suppressing the growth of grass, and it has permeability, so it is fine even when it rains, allowing adequate water to reach the plants. The construction work is very simple: just open the package, lay it down, and water it to complete the process. Additionally, since it is made from natural materials, it can return to its original soil form when crushed. 【Features】 ■ Weakly alkaline, low impact on plants and animals, high safety, and environmentally friendly ■ Mitigates the heat island effect ■ Easy to install (root removal, excavation, leveling, watering) ■ Can be reused as soil containing fertilizer components ■ High permeability, making it difficult for water to accumulate ■ Aesthetic appeal that harmonizes with nature *For more details, please refer to the PDF document or feel free to contact us.

Company：ワイエム
Price：Other

Landscaping materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-strength, high-toughness mortar Auto-Mol Super

This is a super fast-setting, high-toughness mortar that achieves both rapid construction and durability of the floor slab.

AutoMole Super is a repair material from the ultra-rapid hard mortar series, featuring ultra-rapid hard high toughness mortar. By using ultra-rapid hard mortar with organic fibers, we have achieved both rapid construction and durability of the RC deck slabs in road bridge repair and reinforcement work. It demonstrates a strength development of over 24 N/mm² in just 3 hours, making it suitable for various emergency repair scenarios. It can be mixed with a hand mixer or a general-purpose grout mixer. This is a premixed mortar that only requires the addition of water, and simple mortar leveling eliminates the need for compaction with heavy machinery. 【Features】 ○ Ultra-rapid hardening ○ High toughness ○ Good economy ○ Rust-free ○ Easy construction possible For more details, please contact us or download the catalog.

Company：トクヤマエムテック
Price：Other

Reinforcement and repair materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-material type cross-section repair spray mortar 'Repair Mix J1' technical documentation

We will introduce technical materials on the characteristics, freshness properties, falling mortar physical properties, adhesion strength, and performance verification of "Repair Mix J1."

The spray application method for sectional repair requires a spraying technique that is easier to work with and more economical. "Repair Mix J1" is a one-component spray mortar for sectional repair that has excellent pumpability and superior filling ability behind rebar. 【Features】 - Excellent pumpability, allowing for large-scale spraying of 0.8 m³/h. - Maintains long pumpability for over 45 minutes even in summer. - High initial strength development and strong adhesion. - Excellent filling ability behind rebar. - High spalling resistance due to 0.3 vol. reinforcing fibers. - Good finishing properties after spraying. - High-performance polymer cement mortar can be produced with just water mixing, making quality control easy. *For more details, please contact us or download the PDF materials for review.

Company：トクヤマエムテック
Price：Other

Cement mortar coating
cement
Reinforcement and repair materials
mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

mortar Product List and Ranking from 106 Manufacturers, Suppliers and Companies | IPROS

mortar Manufacturer, Suppliers and Company Rankings

mortar Product ranking