mortar Product List and Ranking from 106 Manufacturers, Suppliers and Companies | IPROS

Batch input amount of cement-based on-site mixing materials ◆ List of applicable mixer models

A compatibility chart for 12 manufacturers and 49 products of on-site mixed grout mortar materials by mixer type has been completed!

No more hesitation! The amount of materials for on-site mixing in one batch is listed by manufacturer and model! ■ Listed Materials - Premixed non-shrink grout mortar, cement-based non-shrink mortar - Wet fireproof spray material, spray fireproof coating material - Air mortar, void filling material - Semi-flexible pavement cement milk injection material - Polymer cement-based cross-section repair material, wet spray polymer cement mortar - Premixed PC grout - Tough mortar - Backfill injection material and a total of 49 items ■ Listed Manufacturers in alphabetical order - Ube Industries, Ltd. - SK Kaken Co., Ltd. - Ohashi Chemical Co., Ltd. - Kikusui Chemical Co., Ltd. - Sumitomo Osaka Cement Co., Ltd. - Pacific Materials Co., Ltd. - Chichibu Concrete Industry Co., Ltd. - Denka Company Limited - Tokuyama M-Tech Co., Ltd. - Pozzolis Solutions Co., Ltd. - Maeda Kosen Co., Ltd. - UBE Mitsubishi Cement Corporation A total of 12 companies

Specially formulated mortar for preventing rapid slope weathering and erosion, and for preventing crack development.

The most suitable construction method for slope stability and greening in rugged terrain.

The "Specially Formulated Mortar Spraying Work" is a method of slope construction aimed at preventing erosion and stabilizing slopes, while restoring nature. There are two types: Type A (Greening Work), which aims to protect slopes and prevent erosion in hillside collapse areas, and Type B (Rockfall Prevention Work), which aims to prevent weathering erosion on steep slopes, inhibit the development of cracks, stabilize slopes, and restore nature. For more details, please contact us or download and view the catalog.

Mortar (Premol L)

Mortar (Premol L)

It is lightweight, has good trowel workability, exhibits high fire resistance compared to cement mortar, and has a fireproof structure with a thickness of 15 millimeters.

Vertical pull, roof drain for installation, mortar and coating waterproofing / insert type

The paint uses epoxy resin and is subjected to cationic electrodeposition coating.

The paint for cast iron roof drains uses epoxy resin and is applied with cationic electrodeposition coating (CHUBU Super Coat = CS Coat). The main body is common across all sizes. We offer various models including CRMP-1S for rooftops, CRMLP-1S for floors and rooftops, CFMP-1S for corridors and landings, CBMP-1S for balcony relays with splash prevention rubber, CBMP-1SB for splash prevention type drains for balcony relays, and CWMP-1S for splash prevention type drains for balcony relays. For more details, please contact us or refer to the catalog.

Powder Polymer Cement Mortar "Guts Bond Hayate"

High-performance powder polymer-containing one-component rapid-setting strong tile adhesive cement.

"Guts Bond Hayate" is a high-performance, one-component rapid-setting strong tile adhesive cement developed by Takeya Chemical Research Institute, which contains powdered polymer. It cures significantly faster than conventional tile adhesive mortar, allowing for grouting in a short time. It is ideal for tile work that needs to be completed quickly, such as renovations of stores with tight schedules or tile work during winter when there are concerns about freezing at night.

Fire-resistant insulating mortar

Isolite mortar is widely used in the construction of fire-resistant insulating bricks, adapted to various characteristics such as diatomaceous earth types and clay types, those with large and small bulk densities, and those with open or sealed pore conditions. It possesses suitable fire resistance and has properties such as minimal shrinkage and expansion during drying and sintering, which enhances the efficiency of construction.

One-material type cationic polymer cement mortar Power Mol.

One-material type cationic polymer cement-based high-strength section repair material, compliant with JIS A 6916 CM-2 standards.

Powermol is a premixed mortar that contains cationic acrylic powder polymer, which can be used as a high-strength repair material simply by adding water and mixing. It does not generate waste materials such as cans or bottles. Thanks to the inclusion of short fibers, it excels in thick application workability, reducing the burden on construction workers. Additionally, it does not contain VOCs (volatile organic compounds), significantly reducing its environmental impact, making it an environmentally friendly product.

Plasterer × Tile Collaboration "HYTEGULA"

A new plastering expression woven from softness and strength.

This is an interior finishing material that creates a "new texture" by merging two traditional earth-based materials: tiles and plaster. By utilizing the uneven texture of the base tiles and applying a scraped plaster finish on top, it enhances the "beauty of nature" by adding shadows created by light and illumination. 【Features】 ■ A new finishing material created by combining creative tiles from Seto with a top layer of Yamanashi's sandy soil. ■ Matches various designs, both Japanese and Western, through a combination of five types of specialized tiles and scraped plaster finishes. ■ A natural material (sandy soil from Yamanashi Prefecture) that excels in moisture regulation and retention.

Naoshitaru N

High thixotropic type non-polymer non-shrink cross-section repair mortar material, capable of ultra-thick application exceeding 10 cm in a single spray.

"Naoshi Tar N" is a premixed type of mortar for sectional repair that does not use polymers and can be used by adding a specified amount of water and mixing it during use. It can be applied using spray application methods, and spraying is possible on the first floor at heights exceeding 10 cm. For surface finishing, trowel finishing can be performed, allowing for a typical concrete surface finish. As an example of use, it can be applied without using formwork during RC thickening construction, making it cost-effective and allowing for quick application. It is a non-polymer resin mortar with excellent thixotropic properties, enabling easy flat finishing with trowel work, while not causing sagging during spraying.

Volcanic gravel - scoria

Porous lightweight aggregate with countless large and small pores, also known as volcanic gravel, lava, and red rock.

This is a notice from Tateiwa Stone Industry Co., Ltd. regarding "volcanic gravel scoria."

P-con hole filling mortar *High strength and strong adhesion for a clean finish!

Easy to install and finishes beautifully! High-strength, strong-adhesion mortar specifically for filling P-con holes.

The P-con hole-filling dedicated mortar "Corn Mortar" is a premixed mortar, making it easy to use by simply mixing with water, and it finishes beautifully in a color similar to blast furnace cement. The characteristic of premixed products is that by just adding the specified amount of water and mixing, there is almost no risk of formulation failure. Additionally, even if the person mixing changes, the product maintains consistent quality. 【Features】 ■ As a premixed mortar, it can be used simply by mixing with water! ■ Non-shrink, strong adhesion, color similar to blast furnace cement ■ A 10kg bag can fill 280 holes of P-con (25mm)! （Hoshin Corn Mortar Test Report） ■ Flexural strength: 8.1 (N/mm²) ■ Compressive strength: 46.6 (N/mm²) ■ Adhesion strength: 2.1 (N/mm²) ■ Water permeability: 6.2 (g) ■ Shrinkage rate: 0.06 (%) *For more details, please contact us directly or inquire via catalog download.

Mortar for shaping, filling, and repairing concrete structures - SP mortar

You can shape it by scraping with a trowel, spatula, cutter, etc., until it is fully cured.

SP Mortar for shaping, filling, and repairing concrete structures is a premixed mortar that can be used simply by mixing with water, eliminating the need for sand and cement. It is ideal for patching repairs, crack repairs, chip repairs, and more. It can be used in a wide range of fields, including civil engineering, construction, equipment, and plumbing, and it also performs well for repairing concrete precast products. Additionally, it can be shaped and formed with tools such as trowels, spatulas, and cutters until fully cured. It has excellent adhesion and waterproofing properties. For more details, please contact us or refer to the catalog.

Just mix with water! Premixed air mortar

Small-scale cavity filling method! Achieving high-quality filling by using a dedicated plant.

"Light Fill Foam" is a premixed type of air mortar that only requires water to be mixed. Due to the lightweight and fluidity characteristics of air mortar, it is suitable for cavity filling, and high-quality air mortar manufacturing and filling work can be carried out using a dedicated plant. The compactly designed dedicated plant enables construction in small-scale projects and narrow areas, which were previously less applicable. [Features] ■ Just mix with water ■ Ideal for cavity filling due to lightweight and fluidity ■ Achieves high-quality filling by using a dedicated plant ■ Effective for small-scale projects and narrow areas *For more details, please refer to the PDF materials or feel free to contact us.

Substrate preparation and treatment Manol Cation Set

For renovation and repair work on various difficult-to-adhere substrates. Strong adhesive mortar.

The Manol Cation Set for substrate adjustment and treatment is a premixed polymer cement mortar that strongly adheres to various substrates through a combination of special premixed powder and cationic acrylic emulsion. As a pre-formulated set, it is of high quality and easy to use. It also excels in water resistance, making it effective for waterproofing and moisture-proofing applications, and it has excellent rust prevention and neutralization prevention properties. Additionally, it experiences minimal shrinkage during drying, making it less prone to cracking. For more details, please contact us or refer to the catalog.

[Shortened Construction Period / Emergency Construction] Fast-Hardening Premixed Mortar: Doctor Q

Shortened construction period and urgent work! Fast-setting premixed mortar.

Quick Hardening Mortar Doctor Q is a quick-setting premixed mortar based on special quick-hardening cement, formulated with silica sand, special aggregates, fibers, and admixtures according to its intended use. Please select the product according to the conditions such as the application area, coating thickness, and purpose of use. For more details, please contact us or refer to the catalog.

Quick-setting mortar Instant Jet Mortar 15・30

Just mix with water! A pre-mixed type that can be used for various purposes.

Quick-setting mortar Instant Jet Mortar 15 and 30 is a pre-mixed mortar with quick-setting sand. Just mix with water! It eliminates the hassle of adding aggregates on-site. With quick-setting types, you can choose the curing time, and it is also possible to mix with concrete. It is suitable for general emergency repairs, etc. We offer two types for immediate use: a 15-minute curing type and a 30-minute curing type. For more details, please contact us or refer to the catalog.

Fast-setting mortar for P-con repair.

For filling holes such as those from P-connections. Fast-setting, non-shrink polymer cement mortar.

Fast-setting mortar for P-con repair is a fast-setting, non-shrink polymer cement mortar formulated with re-emulsifiable powder resin and various admixtures, designed for filling and repairing holes in P-con and wooden forms. It can be used simply by mixing with water, is lightweight and resistant to sagging, and can be used for various applications including filling and repairing P-con and wooden forms, repairing site-cast concrete, and fixing chips in concrete precast products, as well as finishing. Additionally, the finished product is cement-colored, allowing for repairs without compromising aesthetics. For more details, please contact us or refer to the catalog.

Quick-setting mortar Manol Arrow Q (standard, accelerated)

It has extremely low shrinkage, excellent adhesion and waterproof properties, making it ideal for construction work such as water stopping and filling.

Quick-setting mortar Manol Aro Q (standard, accelerated) is an ultra-rapid hardening inorganic compound powder that, when mixed with water, quickly hardens into instant-setting cement. The strength increases rapidly alongside the setting and hardening, and it also boasts excellent long-term strength. Additionally, it has minimal shrinkage and outstanding adhesion and waterproofing properties, making it ideal for construction applications such as water stopping and filling. For more details, please contact us or refer to the catalog.

Quick-setting mortar Manol Aro Q Ace standard, accelerated, 3-minute type, 10-minute type.

It has extremely low shrinkage, excellent adhesion and waterproofing properties, making it ideal for construction work such as sealing and filling.

Quick-setting mortar Manol Aro Q Ace is an inorganic compound with ultra-quick setting properties. It rapidly hardens simply by mixing with water. The strength increases rapidly alongside the setting and hardening process, and it also boasts excellent long-term strength. Additionally, it has minimal shrinkage and outstanding adhesion and waterproofing properties, making it ideal for water stopping, filling, repairs, and emergency construction. For more details, please contact us or refer to the catalog.

Non-shrink mortar Tight Graster (standard/accelerated)

High-speed hardening, high fluidity, and non-shrinkage. Ideal for rapid construction and shortening construction time.

Non-shrink mortar Tight Graster (standard and accelerated) is an ultra-rapid hardening, high fluidity, non-shrink ultra-rapid hardening mortar. It hardens in 20 to 30 minutes, achieves practical strength in 60 minutes, has no shrinkage, excellent fluidity, and is ideal for speedy construction and shortening construction periods. Available in standard type or accelerated type, in 25kg bags or 5kg bags x 4 per box. For more details, please contact us or refer to the catalog.

Acid-resistant polymer cement mortar "Stamic HS"

A repair material with excellent sulfuric acid resistance for sewer facilities and various concrete structures!

"Stamic HS" is a polymer cement mortar with excellent sulfuric acid resistance, formulated with blast furnace slag-based powder and special fibers. It complies with the quality standards for repair materials in the "Corrosion Control Technology and Anti-Corrosion Technology Manual for Concrete Structures in Sewage Systems" by the Japan Sewage Works Agency. It can be applied by trowel or sprayed, and can be used as a repair material for the cross-section of various concrete structures. 【Features】 ■ Excellent sulfuric acid resistance due to the formulation of blast furnace slag-based powder and special fibers ■ One-component product with powdered resin mixed in ■ Complies with the performance indicators for repair materials in the Tokyo Metropolitan Bureau of Sewerage's Repair Technology Manual ■ Applicable by trowel or spray *For more details, please refer to the PDF document or feel free to contact us.

Method Introduction: Concrete Pavement Technology "SREM"

Reproduction of all types of art and anti-slip construction using mortar with special resin.

This is a mortar finish that can be applied simply by painting. By applying special resin-containing mortar to various surfaces such as concrete, asphalt, tiles, and metal, it transforms the overall impression of the building with decorative paving. Additionally, it has anti-slip properties, ensuring safety, and can also be used for renovating old, dirty concrete.

[Case Study/Apartment Corridor] Concrete Paving Technology SREM

This is a reproduction of all kinds of art using mortar with special resin, along with slip-resistant construction!

This is a mortar finish that can be applied simply by painting. By applying special resin-containing mortar to various surfaces such as concrete, asphalt, tiles, and metal, it transforms the overall impression of the building into a decorative pavement. Additionally, it has anti-slip properties, ensuring excellent safety, and can also be used for renovating old, dirty concrete. 【Example of Construction】 Address: Kakamigahara City, Gifu Prefecture Location: Apartment shared corridor Photo: Please see the photo at the top left of this page. *In addition to this, Astes has a wealth of construction achievements. For more details, please download the catalog and contact us directly.

Special resin-containing mortar 'SREM Series Askit'

Change the image you've had until now! A mortar that refreshes your image just by applying it.

The "SREM Series Askit" uses a method with special resin-infused mortar, which differs from regular mortar as it does not use a trowel but instead employs a mortar gun, allowing for a quick transformation into a finish resembling granite. Additionally, by creating cutter joints, a beautifully substantial space is achieved that is so impressive it makes one forget about traditional asphalt or concrete. It is a convenient solution for those looking to address concrete stains or change the perception of asphalt. 【Features】 ○ Durability effect ○ Slip resistance effect ○ Non-darkening effect ○ Aesthetic effect For more details, please contact us or download the catalog.

Case Studies of Concrete and Asphalt Refreshing

Pavement refresh case studies. Featuring renewal examples of darkened concrete and more.

The "Concrete and Asphalt Refresh Case Study Collection" is a catalog published by Astes Co., Ltd., featuring various refresh case studies of concrete and asphalt using the specially developed resin-infused mortar "Slem." Slem material is a unique mortar that can be applied with a brush or roller, finishing at a thickness of only about 1mm. 【Featured Cases】 ○ Private residences ○ Parking spaces ○ Apartments ○ Chiropractic clinics ○ Schools, and more For more details, please contact us or download the catalog.

Special Polymer Cement Mortar Serve 15

It is a type that can be used for both spraying and trowel application.

"Serve 15" is a polymer cement mortar made from a special inorganic powder that consists of high-performance special powder resin and special short fibers premixed together.

Special Polymer Cement SK Super Mortar

Beautiful Japanese rural landscapes for the future.

This is a special polymer cement mortar that exhibits performance suitable for agricultural waterway repairs simply by adding water and kneading.

Non-separating water-resistant non-shrink mortar Pacific Preurox LC-MIX

Excellent separation and reduction effect! Minimizes water quality pollution in the construction area.

"Pacific Pre-Eurox LC-MIX" is a product that combines our cement-based non-shrink grout technology with underwater non-segregating admixture technology. As a pre-mixed product, it can be used to obtain a grout mortar with underwater non-segregation simply by mixing it with the specified amount of water on-site. Additionally, since it uses calcium oxide-based expanding agents as a non-shrink base material, stable hardened properties can be expected even when applied underwater. 【Features】 ■ Underwater non-segregation ■ Prevention of water quality pollution ■ Pre-mixed and high fluidity ■ Non-bleeding and non-shrink ■ High strength *For more details, please refer to the PDF document or feel free to contact us.

"Low Carbon" Non-Shrink Mortar Pacific Preurox GX

Low-carbon non-shrink mortar that significantly reduces CO2 emissions.

The "Pacific Pre-Eurox GX" is a low-carbon product that offers performance equivalent to that of conventional general-purpose non-shrink mortars. By utilizing materials adjusted from industrial by-products and special admixtures, it achieves a significant reduction in CO2 emissions of approximately 55% compared to traditional general-purpose non-shrink mortars. Despite being a low-carbon material, it possesses performance equal to or greater than conventional products and can be used in various situations where non-shrink mortar is required. Additionally, by refreshing the materials used, it has improved low heat generation compared to conventional products, as well as enhanced durability in various aspects, including salt resistance. Thanks to the action of non-bleeding and appropriately blended calcium oxide-based expanding agents, integration with components can be achieved under restrained conditions. 【Features】 ■ Stable quality and performance ■ Excellent workability and improved working environment ■ Integration with components ■ High strength development *For more details, please refer to the PDF document or feel free to contact us.