mortar Product List and Ranking from 106 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

mortar Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. 太平洋マテリアル Tokyo//Building materials, supplies and fixtures manufacturers
  2. 畑中産業 第一工場 Nara//Building materials, supplies and fixtures manufacturers
  3. MUマテックス Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 富士川建材工業 Kanagawa//Other construction industries
  5. 5 日之出水道機器 道路橋梁マーケティンググループ Fukuoka//Electricity, Gas and Water Industry
Go to Company Ranking

mortar Product ranking

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

  1. Non-shrink mortar "Denka High Precast Con TYPE-H" 日之出水道機器 道路橋梁マーケティンググループ
  2. Special mortar plaster finishing material "MORART" フッコー
  3. Room temperature polymerization type methacrylate (MMA) resin mortar "Doro Guard"
  4. 4 Cement-based non-shrink mortar Taiheiyo Preurox M 太平洋マテリアル
  5. 5 Just mix with water! Premixed air mortar 麻生フオームクリート

mortar Product List

91～120 item / All 261 items

Displayed results
If you are having trouble with seismic reinforcement work, please consider the "AP Method"!

If you are having trouble with seismic reinforcement work, please consider the "AP Method"!

Even in narrow spaces where it is difficult to carry out seismic reinforcement work, it is possible! It is also easy to manage the mixture, and there are economic benefits as well.

The "AP Method" is a seismic reinforcement technique that utilizes a completely premixed mortar, which pursues the necessary performance as a seismic reinforcement material and workability as a spray application material, applied through wet spraying. It allows for design based on conventional reinforced concrete or reinforced concrete with steel frames. By incorporating high-performance reinforcement fibers (PVA fibers), it enhances crack suppression effects. 【Features】 - Since completely premixed materials are used, only water needs to be added and mixed on-site to produce the required amount, making formulation management easy and providing economic benefits. - No bleeding water occurs, allowing for construction in sites with water restrictions. - As it is a wet spraying application, dust dispersion during construction is relatively low, resulting in less site contamination. - It can be applied using a simple mortar pumping system, making it feasible for construction in narrow spaces. *For more details, please download the PDF or feel free to contact us.

  • Earthquake-resistant construction method
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Asuwa Trading Co., Ltd. Business Introduction

Asuwa Trading Co., Ltd. Business Introduction

Specialized trading company for chemical energy and building materials.

Asuwa Bussan Co., Ltd. is a specialized trading company in chemicals, energy, and building materials, leveraging the experience and achievements cultivated over many years to continuously provide new and suitable products, technologies, and information. We handle a wide range of products in the building materials sector, including cement products and concrete admixtures, in the petrochemical sector with industrial chemicals, and in the environmental sector with high-quality urea water, so please feel free to consult us when you have any requests. [Company Objectives] ■ Sales of industrial chemicals and pharmaceuticals ■ Sales of high-pressure gas types 1 and 2 ■ Sales of petroleum products ■ Sales of cement and ready-mixed concrete products ■ Sales of concrete admixtures, etc. *For more details, please download the PDF or feel free to contact us.

  • cement
  • Ready-mix concrete
  • Medicines
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cement-based non-shrink mortar "DS Masumoru"

Cement-based non-shrink mortar "DS Masumoru"

Despite low expression levels, stable strength expression. Capable of suppressing temperature cracking during the construction phase.

"DS Mass Mortar" is a cement-based non-shrink mortar that is non-breeding and has an almost zero expansion and contraction rate (no hydration shrinkage), allowing for integration with structures after filling. It reduces temperature stress in components, thereby suppressing temperature cracking during the construction phase. Additionally, it has minimal shrinkage due to drying, making it less likely to develop cracks after demolding. 【Features】 ■ Low heat generation ■ Low drying shrinkage ■ Non-shrink ■ High fluidity ■ Strength development *For more details, please refer to the PDF materials or feel free to contact us.

  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mortar 'MORTEX' that can create design concrete with a thin coating.

Mortar 'MORTEX' that can create design concrete with a thin coating.

"Design concrete" finish mortar that can be created with a thin layer! Suitable for use indoors, as well as everywhere from floor to ceiling outdoors!

"MORTEX (R)" is a finishing mortar that allows for the creation of "design concrete" with excellent functionality and high aesthetic appeal in a thin application. It can be used not only indoors but also outdoors, applicable in various places from floors to ceilings. By applying knowledge gained from extensive experience in waterproofing and renovation construction, we achieve the development of plastering materials with diverse performance and characteristics. 【Features】 ■ Waterproof ■ Flexibility ■ High adhesion ■ Toughness ■ Thin film thickness *For more details, please request materials or view the PDF data available for download.

  • Mortar and plaster materials
  • Other plastering finishing agents
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cement mortar "Magical Ment"

Cement mortar "Magical Ment"

No need for kneading water, just mix it with the bag.

"Magical Cement" is a high-performance cement mortar that can be easily made by simply mixing the bag, featuring rapid hardening, high strength, and waterproof properties. No aggregates (sand), mixing water, or mixing tools are required. It can quickly address issues such as leveling floors in residential gates or warehouses. Please feel free to consult us if you have any requests. 【Features】 ■ No aggregates (sand), mixing water, or mixing tools required ■ Rapid hardening, high strength, waterproof ■ Usable for a wide range from pouring to cross-section repair ■ Completely free of harmful substances ■ Usable for thin to thick applications *For more details, please download the PDF or feel free to contact us.

  • Cement mortar coating
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polymer Reinforced Thin Coating Mortar '255 MULTIMAX'

Polymer Reinforced Thin Coating Mortar '255 MULTIMAX'

Get high strength and performance immediately upon mixing with water! Introducing a versatile lightweight mortar.

LATICRETE's '255 MULTIMAX' is a thin-set mortar reinforced with Kevlar fibers, offering excellent sag resistance and allowing for adjustments of large tiles and stones installed on walls after application. It can be easily applied with a trowel. When mixed with water, it achieves high strength and performance immediately. It contains Microban antimicrobial agents that help prevent stains and mold caused by dirt. We also offer "PERMACOLOR GROUT," a cement-based grout. 【Features】 ■ Excellent sag resistance ■ Easy application with a trowel ■ Contains Microban antimicrobial agents ■ Helps prevent stains and mold caused by dirt ■ U.S. Patent No.: 6,784,229,B2 (and other patents) *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lightweight cement mortar "Ibihouse Mortar"

Lightweight cement mortar "Ibihouse Mortar"

The ideal formulation results in a low shrinkage rate, significantly reducing the occurrence of cracks! Lightweight cement mortar.

"Ibi House Mortar" is a pre-mixed lightweight cement mortar that boasts the performance and workability required for residential exterior wall substrates, promising cost reduction through shortened construction periods. No asbestos is used in the raw materials. Additionally, due to its lightweight and non-sagging properties, it allows for a thick application of 17mm in a follow-up process, contributing to a reduction in construction time. 【Features】 ■ The ideal formulation results in a low shrinkage rate, significantly reducing the occurrence of cracks. ■ The finished surface is smooth, and brush application is also possible. ■ Excellent fire resistance due to inorganic aggregates. *For more details, please download the PDF or feel free to contact us.

  • Cement mortar coating
  • cement
  • Premixed mortar
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Sample Presentation] Residential Foundation Protection System 'Rapid Shoes EM'

[Sample Presentation] Residential Foundation Protection System 'Rapid Shoes EM'

A must-see for builders! One-day installation, one-coat type for time savings! House shoes series that improve the durability of the foundation.

"Rapid Shoes" is a residential foundation protection system that enhances the durability of foundations. It eliminates fine cracks and contamination on the surface of residential foundations and suppresses the neutralization of foundation concrete. It is an elastic color mortar that incorporates coloring agents into an elastic polymer cement mortar, and due to its two-component one-coat type, it can reduce working time. 【Features】 ■ Capable of suppressing fine cracks that occur in the foundation ■ Can maintain the foundation surface in a clean condition for a long time ■ Can suppress stains caused by moisture drawn up from the ground ■ Being a one-coat type, it can shorten working time ■ Has the effect of suppressing the neutralization of concrete *For more details, please refer to the PDF materials or feel free to contact us.

  • Premixed mortar
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Refresh] Takeya Chemical Research Institute Co., Ltd. Company Profile

[Refresh] Takeya Chemical Research Institute Co., Ltd. Company Profile

We have newly refreshed! With a pioneering spirit, a heart of gratitude, and the bonds of each employee, we will engage in manufacturing that contributes to society.

Our company is currently focused on the manufacturing and sales of polymer cement for construction, as well as the research, planning, and sales of related products and construction method systems. Polymer cement has a wider range of applications than traditional cement mortar and is gaining attention as a material that "makes what was previously impossible possible." With the aspiration to "create what is needed by people with an eye on the next generation," we are committed to continuing our research and development of products that can be used in various applications centered around this polymer cement. We will continue to build an organization that delivers happiness and prosperity to society through "dream-filled manufacturing," and we will work together as a united team to contribute broadly to society. 【Business Activities】 ■ Polymer cement for residential foundation protection ■ Polymer cement for tile adhesion ■ Polymer cement for special substrates ■ Colored coatings for interior and exterior use ■ Waterproofing agents ■ Other related products for plastering *For more details, please refer to the PDF materials or feel free to contact us.

  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
If the flooring is peeling or damaged, apply Ucrete. Meat processing plant.

If the flooring is peeling or damaged, apply Ucrete. Meat processing plant.

Backfilling with quick-setting mortar has been done, and the finish is "Eucrete RG"!

Here is an example of a construction project for a meat processing factory located in Yokohama City, Kanagawa Prefecture. We received a request to replace the baseboard molding and connect it to the flooring and coating. We have removed the existing baseboards and backfilled with quick-setting mortar, and the finish is 'U-Crete RG'. 【Project Overview】 ■ Meat Processing Factory in Yokohama City, Kanagawa Prefecture ■ Flooring Method: U-Crete RG *For more details, please refer to the PDF document or feel free to contact us.

  • Plastering and painting work
  • Special Construction Method
  • Special flooring/indoor
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Two-component elastic color mortar "Rapid Shoes EM"

Two-component elastic color mortar "Rapid Shoes EM"

Suppressing the neutralization of basic concrete! It can be used to prevent the efflorescence phenomenon of cement.

"Rapid Shoes EM" is an elastic color mortar that incorporates coloring agents into a pre-mixed elastic polymer cement mortar. It reduces fine cracks and contamination on the surface of residential foundations and helps suppress the neutralization of the foundation concrete. Additionally, being a one-coat type, it can shorten the working time. [Features] ■ Incorporates coloring agents into pre-mixed elastic polymer cement mortar ■ Reduces fine cracks and contamination on the surface of residential foundations ■ Has the effect of suppressing the neutralization of foundation concrete ■ Being a one-coat type, it reduces construction time *For more details, please refer to the PDF document or feel free to contact us.

  • Premixed mortar
  • Cement mortar coating
  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lightweight cement mortar for wooden structures "Base Mortar B"

Lightweight cement mortar for wooden structures "Base Mortar B"

Ras method, non-Ras method, ventilation method compatible, non-combustible, thermal insulation, lightweight mortar.

"Base Mortar B" is a special lightweight pre-mixed mortar developed by blending cement, fibers, lightweight aggregates, and special resins for thick application and as a base mortar. It is characterized by low shrinkage and minimal crack occurrence, utilizing special lightweight aggregates, allowing for thick application with follow-up coating, which shortens construction time. Additionally, it can be applied with a brush and is suitable as a base for painting and spraying. [Features] - Reduced cracking - From thin to thick application - Smooth surface - Excellent performance - Good workability - Pre-mixed material *For more details, please download the PDF or feel free to contact us.

  • Premixed mortar
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pre-mixed mortar for residential foundations "Waist Mortar"

Pre-mixed mortar for residential foundations "Waist Mortar"

The setting after application is quick, and finishing is easy! It is a dual-purpose type for both brush drawing and pressing!

"Koshi Mortar" is a pre-mixed cement mortar designed for finishing concrete foundation surfaces of general buildings, ideally formulated with inorganic aggregates. It is a trowel-applied material that allows for easy brush and trowel finishing. It is lightweight and has excellent workability, with quick setting after application, making finishing easy. Additionally, it has less surface aggregate loss, which is common with brush-finished general lightweight mortars. 【Features】 ■ Suitable for both brush and trowel finishing ■ Lightweight with excellent workability ■ Quick setting after application, making finishing easy ■ Less surface aggregate loss compared to typical brush-finished lightweight mortars *For more details, please refer to the PDF document or feel free to contact us.

  • Cement mortar coating
  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mortar for filling sashes "Tumeru Mortar"

Mortar for filling sashes "Tumeru Mortar"

It's easier to work with because it has a lighter weight compared to on-site mixed mortar! It prevents condensation due to its high insulation performance!

"Tsume-ru Mortar" is a mortar for filling sashes that has very low shrinkage, resulting in fewer cracks and making it difficult to create gaps with the sash. It does not require on-site mixing, making it easy to work alone on high floors. Additionally, its moderate slip allows for smooth suction and discharge with filling equipment. 【Features】 ■ Lighter than on-site mixed mortar, making application easy ■ Minimal sagging and good shape retention after application ■ High waterproof performance, resulting in low water penetration ■ High thermal insulation performance prevents condensation *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Aluminum sash
  • Stainless steel sash
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thick coating mortar for floors "Thick Coating for Floors"

Thick coating mortar for floors "Thick Coating for Floors"

Introducing a mortar with powder resin! Excellent workability! Suitable for both inorganic and organic finishing materials!

"Floor Thick Coating" is a one-component thick coating mortar for floors that has excellent workability, wear resistance, and compressive strength. Compared to conventional mortars, it excels in water resistance and durability, allowing for smooth floor repairs with minimal lifting and cracking. Additionally, it can be finished with tiles and other materials, as well as organic materials such as urethane and epoxy. 【Features】 ■ One-component with acrylic powder resin ■ Outstanding workability ■ Can be finished with tiles and other materials ■ Can be finished with organic materials such as urethane and epoxy *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Special flooring/indoor and outdoor
  • Other flooring materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin-layer mortar for flooring "Thin Coating for Floors"

Thin-layer mortar for flooring "Thin Coating for Floors"

Introducing a mortar with powdered resin! It allows for smooth floor repairs with minimal floating and cracking.

"Floor Thin Coating" is a one-component thin coating mortar that allows for smooth floor repairs with minimal floating and cracking. It has excellent workability and outstanding wear resistance and compressive strength. 【Features】 ■ Contains powdered resin ■ One-component with acrylic-based powdered resin ■ Excellent workability ■ Compatible with organic finishing materials ■ Please consult separately for external exposed finishes *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Special flooring/indoor and outdoor
  • Other flooring materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mortar "Magical Cement"

Mortar "Magical Cement"

Special premixed mortar for dramatic decoration of shops and homes.

"Magical Cement" is a special pre-mixed mortar for sculpting that can express materials such as bricks, stones, and wood. Compared to regular mortar, it uses very fine sand. We offer two types, "Gray Type" and "White Type," which can be chosen based on the sculpting pattern and color tones. 【Features】 ■ Can express bricks, stones, and wood ■ Uses very fine sand ■ Two types available based on sculpting patterns and color tones *For more details, please download the PDF or feel free to contact us.

  • Cement mortar coating
  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Examples of applications for rockfall prevention construction methods: Preliminary works for disaster recovery, etc.

Examples of applications for rockfall prevention construction methods: Preliminary works for disaster recovery, etc.

DK Bond Mortar achieves the specified adhesion strength in 7 days! It is a method that allows for immediate commencement of construction.

We would like to introduce examples of applications for the rockfall prevention construction method by Daini Kensetsu Co., Ltd. Our rockfall prevention construction method is adaptable for "preliminary work for disaster recovery," for instance, in cases where "immediate effectiveness is desired." It requires no effort for preparatory or temporary work, allowing for immediate commencement of construction. DK Bond Mortar can achieve the specified adhesion strength within 7 days of curing. 【Features】 ■ No effort required for preparatory or temporary work ■ Immediate commencement of construction possible ■ DK Bond Mortar can achieve the specified adhesion strength within 7 days of curing *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Civil Engineering Method
  • Earthquake-resistant construction method
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acid-resistant mortar "U-Ashitect"

Acid-resistant mortar "U-Ashitect"

For the renewal of sewers and various drainage facilities! Acid-resistant mortar that responds to various corrosive environments.

"U-Ashitect" is a corrosion protection method suitable for environments such as sewage and drainage facilities (coating type lining method, mortar lining method). We offer a lineup including "U-Ashitect AP," which is based on blast furnace slag, and "U-Ashitect T," which is based on alumina cement. We also have a track record of application in drainage channels and treatment tanks in food and chemical plants, as well as in sulfuric acid pits in mines. 【Related Product List】 ■ U-Ashitect AP ■ U-Ashitect T ■ U-Primer T (mixing liquid for U-Ashitect T) ■ Filstar I B (inorganic crack injection material) ■ Filstar SS/SW (ultra-fast hardening water stop material) ■ U-Paste II (lithium nitrite-based rebar rust prevention material) *For more details, please refer to the PDF document or feel free to contact us.

  • Civil Engineering Method
  • Concrete construction
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polymer Cement Mortar "U-Aquaface"

Polymer Cement Mortar "U-Aquaface"

Recommended for surface coating and cross-section repair of concrete structures in water facilities and similar applications!

"U-Aquaface" is a polymer cement mortar that excels in abrasion resistance and winter construction performance. It can be used for surface coating and cross-section repair of concrete structures such as water facilities. It can be applied by trowel or spraying, and due to its excellent trowel workability and quick drying properties, it is expected to shorten construction time. [Features] ■ Can be applied by trowel or spraying ■ Shortens construction time due to excellent trowel workability and quick drying properties ■ Very low shrinkage and stable dimensional changes, resulting in excellent crack resistance ■ Strengthens deteriorated concrete substrates and achieves stable adhesion *For more details, please refer to the PDF document or feel free to contact us.

  • Civil Engineering Method
  • Concrete construction
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete structure cross-section repair mortar "U-Repair Patch EX"

Concrete structure cross-section repair mortar "U-Repair Patch EX"

The shrinkage is very small! A composite type cross-section repair material with extremely fast strength development.

The "U-Repair Patch EX" is an all-premix type repair material for cross-section restoration that exhibits extremely rapid strength development. Its performance is fully demonstrated in emergency repairs that require early opening and in the repair of structures that are in use. It can also accommodate thick applications by applying multiple layers in a short time. Additionally, it has very low shrinkage and stable dimensional changes, which gives it excellent crack resistance. 【Features】 ■ Can be applied in layers of approximately 5mm to 20mm using trowel application ■ All-premix type (single-component) ■ Lightweight and fast-setting type, making it excellent for application on ceiling surfaces and similar areas ■ Achieves over 5N/mm² within 5 hours after application even in winter conditions (at 5°C) ■ Despite being a fast-setting type, it has a usable time equivalent to conventional products *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Cement mortar coating
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Section repair polymer cement mortar "U-Repair Flow"

Section repair polymer cement mortar "U-Repair Flow"

Excellent fluidity allows it to fill narrow gaps! It exhibits higher durability compared to grout materials.

"U-Repair Flow" is an all-premix type polymer cement mortar for cross-section repair, suitable for filling methods and formwork injection methods. Since it is all-premix, it only needs to be mixed with water on-site. It also demonstrates sufficient fluidity, allowing it to easily fill fine gaps, and has very low shrinkage with stable dimensional changes, making it excellent in crack resistance. 【Features】 ■ Only needs to be mixed with water on-site since it is all-premix ■ Demonstrates sufficient fluidity, allowing it to easily fill fine gaps ■ Very low shrinkage and stable dimensional changes, making it excellent in crack resistance *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • Mortar and plaster materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dedicated pre-mortar agent for concrete pumps "Slick Power Mortar"

Dedicated pre-mortar agent for concrete pumps "Slick Power Mortar"

Ensuring high viscosity and high strength, designed for material separation!

"Slick Power Mortar" is a specialized pre-mortar agent designed exclusively for concrete pumps, achieving remarkable ease of mixing. Since it is specifically tailored for concrete pumps, it ensures better fluidity and strength compared to conventional mortars, making it more user-friendly. 【Features】 ■ Compact size that is convenient for on-site preparation and use, storage, and transport ■ Extremely easy to mix and simple to prepare ■ No need for pre-water ■ Significantly reduces waste, CO2 emissions, and costs when using three bags for boom placement *For more details, please download the PDF or contact us.

  • Mortar and plaster materials
  • Temporary Construction Materials
  • Safety and consumables
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stop Water Putty TametaroⓇ Ser. Premixed Mortar Hatsureeru

Stop Water Putty TametaroⓇ Ser. Premixed Mortar Hatsureeru

TometaroⓇ optional products, mortar that can increase water resistance, and it's easy to chisel! 【Water infiltration measures / waterproofing】

For projects involving the construction of renewable energy, flood prevention, and waterproofing, we propose safe and long-lasting water-stopping solutions. In addition to the optional products for the water-stopping putty TometaroⓇ, which prevent leaks at cable penetration points and recommend the "two-layer filling" method, we have developed additional options based on the requests of design companies and contractors, such as "I want to solidify the bell mouth opening" or "I want even higher water-tight performance." Our company recommends the "two-layer filling" method using "backup material + non-drying water-stopping material TometaroⓇ," but when filling the third layer opening with a fully cured finishing material, please use it in conjunction with TometaroⓇ and Hatsureeru. As the name suggests, Hatsureeru allows for easy and safe chiseling after filling when re-running cables. *For details, please request a catalog from "Contact Us" or view the PDF data from "Download"

  • Company：EPJ
  • Price：Other
  • eM7CoakXbD2nOXL1722752721_1722752738.png
  • wrxfdzQTL6sAPrS1722752488_1722752508.png
  • j1Q9ESrwF8kMbYu1722752519_1722752532.png
  • dPOPXamSqaLKSOm1722752540_1722752556.png
  • 72cYi1GWa2Opxqi1722752565_1722752576.png
  • LQ3Blwf5jeA6jQT1722752584_1722752595.png
  • yDjTqzkOKmlzdCW1722752602_1722752612.png
  • hzAZnbe1AqtMeTb1722752625_1722752659.png
  • WPl0U5XIsg95jRK1722752684_1722752703.png
  • Waterproofing Agent
  • Reinforcement and repair materials
  • Subsidiary materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DOVE ATTRACTIONS Comprehensive Catalog

DOVE ATTRACTIONS Comprehensive Catalog

A department where professionals from various fields, such as sculptors and painting artists, gather! Featuring paints/pigments for sculptural arts and more.

DOVE ATTRACTIONS provides unified services for theme park and aquarium projects. This catalog features "sculptural and architectural mortar," which is highly durable and excellent at preventing cracking, as well as "DOVEpoxy," an epoxy-based material used for various indoor and outdoor sculptures and exhibits. In addition to supplying products, our experienced project team and numerous on-site technical teams will produce all production and installation processes. [Contents] ■ Sculptural and architectural mortar ■ DOVEpoxy ■ Paints and pigments for sculptural arts ■ Technical services ■ Maintenance products *For more details, please refer to the PDF document or feel free to contact us.

  • molding
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Forming Mortar Gilt Cement [Regular 25kg]

Forming Mortar Gilt Cement [Regular 25kg]

This is a standard carving mortar suitable for regular shaping.

Main use: artificial rock, artificial stone, brick, plaster Color: gray

  • Trees
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wet-type mortar and wet-type refractory material spraying construction spray gun F series

Wet-type mortar and wet-type refractory material spraying construction spray gun F series

◆Spray gun for wet mortar and wet refractory material spraying construction◆Can be selected according to spraying construction conditions such as construction area and spraying thickness◆

■Wet-mix mortar spray gun A spray gun for applying premixed mortar and polymer cement mortar. ■Wet refractory material spray gun ■Air nozzle type spray gun ■Ring gun This offers a variety of options based on spray area and spray pressure. The gun nozzle can be selected in stainless steel or rubber. The connection to the hose from the mortar pump can be chosen between a G color joint and a cam lever.

  • Reinforcement and repair materials
  • mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to mortar

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.