joint Product List and Ranking from 37 Manufacturers, Suppliers and Companies

Spherical Rubber Flexible Joint "F-FLEX"

Vibration absorption, absorption of piping expansion and displacement, excellent vibration isolation effect and pressure resistance.

"F-FLEX" is a flexible joint made of spherical rubber, handled by Chūnichi Giken Kōgyō Co., Ltd. It has excellent vibration absorption, accommodates expansion and displacement of piping, and offers superior vibration isolation and pressure resistance. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (however, this may vary depending on usage conditions.) ■ Maximum operating temperature: 70°C (however, this may vary depending on usage conditions.) ■ If the operating pressure is negative (vacuum), please use the embedded rubber type. ■ If the fluid is gas, the maximum operating pressure will change, so please inquire. ■ For fluids such as wastewater and powders that tend to accumulate in the mountain area, the embedded rubber type is recommended. (1) Cannot be used for hot water piping. (Please use D-FLEX.) (2) Cannot be used for pool water. (For circulation pumps around pool water, please use D-FLEX.) (3) Cannot be used in areas where frequent pressure fluctuations occur, such as the delivery side of pressurized or booster water pumps. (4) Generally, cannot be used with fluids or installation locations that may degrade the elasticity of the rubber. *For more details, please refer to the PDF document or feel free to contact us.

Company：中日技研工業
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2 Mountain Spherical Rubber Flexible Joint 'FW-FLEX'

Excellent vibration-damping effect and pressure resistance, two-mountain spherical type.

"FW-FLEX" is a flexible joint made of rubber with a two-mountain spherical design, handled by Chūnichi Giken Kōgyō Co., Ltd. It offers excellent vibration-damping effects and pressure resistance. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 70℃ (However, this may vary depending on usage conditions.) ■ If the operating pressure is negative (vacuum), please use the embedded rubber type. ■ If the fluid is gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used for hot water piping. (Please use D-FLEX.) (2) It cannot be used for pool water. (For circulation pumps around pool water, please use D-FLEX.) (3) It cannot be used in areas where pressure fluctuations occur frequently, such as the delivery side of pressurized or booster water pumps. (4) In general, it cannot be used with fluids or installation locations that may degrade the elasticity of the rubber. *For more details, please refer to the PDF materials or feel free to contact us.

Company：中日技研工業
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spherical Flexible Joint "D-FLEX"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"D-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the liquid-contacting part is made of fluororesin, it has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure may change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps where pressure fluctuations occur frequently. (2) Due to the material properties, there may be a decrease in sealing performance. In this case, please perform additional tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

Company：中日技研工業
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylindrical Flexible Joint "T-FLEX S"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

The "T-FLEX S" is a cylindrical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the inner surface is straight, there is no liquid pooling. 【Usage Range】 ■ Maximum Operating Pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum Operating Temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. *If used beyond the maximum operating pressure (1.0 MPa), we will conduct a separate structural review, so please inquire. (1) It cannot be used in areas such as the delivery side of pressurized water pumps where pressure fluctuations occur frequently. (2) Due to the material properties, there is a possibility of decreased sealing performance. In this case, please perform additional tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

Company：中日技研工業
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [S Flex]

Cylindrical type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in air conditioning equipment, water supply and drainage sanitary equipment, and various plant facilities!

Expansion joints (flexible joints/rubber joints) are used to prevent vibrations and noise generated from piping systems, absorb expansion and displacement due to temperature and pressure changes, and mitigate or prevent the effects of various dimensional changes during installation, as well as impacts from earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks, and since then, it has added new products to meet customer needs, including the high-pressure P type integrated with PTFE, the F type, and is now used by a wide range of customers in various industries, from household drinking water to chemical plant piping. 【Features】 1. Capable of accommodating large eccentricities. 2. Excellent for installation work due to the use of loose flanges. *Nominal diameters 20A to 40A comply with Ministry of Land, Infrastructure, Transport and Tourism specifications. For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [SL Flex]

Cylindrical type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in air conditioning equipment, water supply and drainage sanitary equipment, various plants, etc.! [Meets Ministry of Land, Infrastructure, Transport and Tourism specifications]

Expansion joints (flexible joints/rubber joints) are used to prevent vibrations and noise generated from piping systems, absorb expansion and displacement due to temperature and pressure changes, and mitigate or prevent the effects of various dimensional changes during installation, as well as impacts from earthquakes and ground subsidence. They are considered essential components in piping systems. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks. Since then, it has added new products to meet customer needs, including the high-pressure P type integrated with PTFE and the F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Capable of accommodating large eccentricities 2. Excellent installation work due to the use of loose flanges For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [R Type]

Low pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Protects connection points around FRP tanks and is effective in vibration prevention for low pressure pumps and blowers!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing impacts from earthquakes and ground subsidence. They are considered essential components in piping equipment. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks. Since then, it has expanded to include new products that meet customer needs, such as the high-pressure P type integrated with PTFE and the F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Low deformation stress, suitable for vibration damping and expansion absorption in low-pressure plastic piping. 2. Excellent installation work due to the use of loose flanges. For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [RM Type]

Low pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Protects connection points around FRP tanks and is effective in vibration prevention for low pressure pumps and blowers!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing impacts from earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R-type for elevated water tanks. Since then, it has added new products to meet customer needs, including the high-pressure P-type integrated product F-type with PTFE. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Low deformation stress, suitable for vibration damping and expansion absorption in low-pressure plastic piping. 2. Excellent installation work due to the use of loose flanges. For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [A1 Flex]

Pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in vibration prevention for factory equipment pumps and blowers!

Expansion joints (flexible joints/rubber joints) are used to prevent vibrations and noise generated from piping systems, absorb expansion and displacement due to temperature and pressure changes, and mitigate or prevent the effects of various dimensional changes during installation, as well as impacts from earthquakes and ground subsidence. They are considered essential components in piping systems. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks. Since then, it has expanded to include new products that meet customer needs, such as the high-pressure P type integrated with PTFE and the F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Excellent vibration absorption 2. Superior installation work due to the use of loose flanges For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [P Type / Small Diameter]

Pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Effective for vibration isolation of general-purpose pumps and blowers in factory equipment, as well as for absorbing expansion in heat-resistant resin piping!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing impacts from earthquakes and ground subsidence. They are considered essential components in piping equipment. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks, and since then, it has added new products to meet customer needs, including the integrated high-pressure P type PTFE and F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Stable durability due to the combination of strong reinforcing fibers and reinforcing steel wires. 2. EPDM is used for the inner and outer rubber, providing excellent chemical resistance and weather resistance. 3. The use of loose flanges facilitates installation work. For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [RF Type]

Low pressure, internal PTFE type! Absorbs vibration, noise, expansion, and displacement in piping systems! Active in piping for corrosive fluids in chemical plants and vibration prevention for corrosion-resistant pumps!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing the effects of earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R-type for elevated water tanks. Since then, it has added new products to meet customer needs, including the high-pressure P-type integrated product with PTFE, known as the F-type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Low-pressure type with PTFE (polytetrafluoroethylene) inner surface coating 2. Uses PTFE in the liquid-contacting part (inner surface), providing excellent chemical resistance 3. Improved resistance to external impacts through integration with durable and strong rubber For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [SF Type]

Super soft, inner PTFE type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Effective in piping for corrosive gases in chemical plants!

Expansion joints (rubber joints) are used for preventing vibrations and noise generated from piping systems, absorbing expansion and displacement due to temperature and pressure changes, as well as accommodating various dimensional fluctuations during installation and mitigating or preventing the effects of earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks. Since then, it has expanded to include new products that meet customer needs, such as the high-pressure P type integrated with PTFE and the F type. Today, it is used by a wide range of customers across various industries, from household drinking water to chemical plant piping. 【Features】 1. Pressure type PTFE (polytetrafluoroethylene) inner surface coating type 2. The liquid-contacting part (inner surface) uses PTFE, which has excellent chemical resistance 3. Improved resistance to external impacts through integration with durable and strong rubber For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Expansion Joint "EP Joint" [PL Type Large Diameter]

Pressure type! Absorbs vibrations, noise, expansion, and displacement in piping systems! Active in absorbing expansion and displacement in factory equipment piping and water supply and drainage piping!

Expansion joints (rubber joints) are used to prevent vibrations and noise generated from piping systems, absorb expansion and displacement due to temperature and pressure changes, as well as to accommodate various dimensional fluctuations during construction and mitigate or prevent the effects of earthquakes and ground subsidence. They are considered essential components in piping installations. The E-P joint was launched in 1970 (Showa 45) as a low-pressure R type for elevated water tanks, and since then, it has added new products to meet customer needs, including the integrated high-pressure P type PTFE F type. Today, it is used by a wide range of customers in various industries, from household drinking water to chemical plant piping. 【Features】 1. Has a larger allowable displacement than the P type. 2. Stability in durability due to the combination of strong reinforcing fibers and reinforcing steel wires. 3. Uses EPDM for the inner and outer rubber, offering excellent chemical resistance and weather resistance. 4. Excellent for installation work due to the use of loose flanges. For more details, please contact us or refer to the catalog.

Company：内外ゴム
Price：Other

Expansion joint hardware
Piping Equipment
Water Supply Facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water cooling and liquid cooling joints (couplings, connectors, fittings)

The NS series allows for one-touch connection without any liquid leakage. Significant cost reduction from stainless steel fittings with super engineering plastic fittings!

By using the NS (Non-Spill) series, which prevents water leakage during attachment and detachment, you can avoid the risk of splashing onto electronic devices. Additionally, by using polysulfone coupling (such as HFC35 and HFC57), which is a super engineering plastic, significant cost reductions can be achieved compared to stainless steel couplings. There are also many products that can be used from ultra-low temperatures (minus 40 degrees) and have excellent weather resistance. You can watch a demonstration video at the following link: http://www.youtube.com/watch?v=R55q-mLkXE0 We also sell metal non-spill couplings made from materials such as stainless steel and aluminum. Furthermore, some metal couplings can withstand temperatures up to 204 degrees. Please contact us for more details.

Company：CPC（コールダー・プロダクツ・カンパニー）スウェップジャパン株式会社CPC製品事業藤沢事務所
Price：Other

Welfare and medical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Easy connectors and joints that anyone can use (Breakaway Series)

One-touch connection available.

CPC has developed couplings that can be easily used by anyone from the elderly to children. They can be used for gases and liquids. In the Break-Away series, there is no need to press a thumb push button; you can simply pull to disconnect. The double automatic shut-off valve automatically stops the flow of liquid even during transfer, making it safer and more effective for enhancing productivity.

Company：CPC（コールダー・プロダクツ・カンパニー）スウェップジャパン株式会社CPC製品事業藤沢事務所
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

joint Product List and Ranking from 37 Manufacturers, Suppliers and Companies

joint Manufacturer, Suppliers and Company Rankings

joint Product ranking