Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 125 items
Ratchet jack
We offer a lineup of 8 models of manual jacks for lifting heavy loads using a rack, with capacities ranging from 44 to 133 kN. The ratchet jack is manual, meaning it is a mechanical jack that does not require power. Both steel and aluminum options are available, allowing you to choose based on your application. Being mechanical, it can safely support loads for extended periods.
Reel jack
This is a mechanical jack for raising and lowering electric wire cable drum reels. We offer four types that can accommodate drum reels of various sizes. It is a manual mechanical operation, so it does not require power and can be used safely and easily. It has a lifting and lowering capacity ranging from 44 to 178 kN.
Screw jack
By simply turning the screw manually, leveling can be easily achieved. The load cap at the tip of the screw has a tilt structure, allowing the cap to follow up to a 10° angle relative to the workpiece, so you can use it with confidence.
Ultra-high pressure hydraulic equipment hydraulic jack
Using sturdy and durable road skates makes it possible to move heavy objects safely and easily.
Ultra-high pressure hydraulic equipment - hydraulic jack
It is possible to perform lifting operations of large heavy objects without using cranes or similar equipment.
Ultra-high pressure hydraulic equipment - hydraulic jack
Equipped with a stop ring to prevent the plunger from coming out of the cylinder.
Equipment for lifting super-heavy objects to high places.
With a high-quality opening and closing chuck mechanism and wire, it drives the hydraulic strand jack, enabling safe movement and installation for lifting and installing large, heavy tanks and construction structures. The graphic automatic control device centrally manages and controls all aspects such as lifting stroke, speed, center of gravity, and load capacity.
For the next drilling phase! A case study using a synchronized lifting system and hydraulic jacks.
In 2013, Jakarta, the capital of Indonesia, began construction of a Mass Rapid Transit (MRT) system with the expectation of alleviating urban traffic congestion. One of the critical stages of tunnel construction is the pass-through. In this pass-through, it is necessary to move the Tunnel Boring Machine (TBM) through the underground station to the next excavation site, which requires a high-precision system to handle heavy loads with uneven weight distribution. To achieve this, Ekatama Group used a synchronized lifting system and hydraulic jacks to lift and slide the TBM with an accuracy of 1mm throughout all positioning operations. The stroke sensors at each lifting point generated real-time updates and measured load displacement to maintain the precision of 1mm. *For more details, please refer to the PDF document or feel free to contact us.*
An important element of the underground jack system! Reduces a lot of time and a lot of frustration.
Changing a flat tire on heavy machinery is one of the particularly dangerous and time-consuming maintenance tasks in underground mining, often taking up to 12 hours to complete in limited spaces with inclines. CME Boilermaking, a leading engineering and manufacturing specialist in Australia, has designed an efficient solution that allows vehicles to be manually jacked up for safe and reliable lifting and maintenance. The company's underground jack system is connected to Enerpac XC series cordless hydraulic pumps and RAR series durable lightweight aluminum cylinders, capable of handling loads of up to 100 tons. "The Enerpac battery pump is the perfect solution, as the absence of cords enhances operator safety," it has been praised. *For more details, please refer to the PDF materials or feel free to contact us.*
We will introduce a case where the foundation of a historic building was safely lifted and restored!
The renovation of a historic building in the capital of Georgia required lifting a 3.4-meter-high steel tower. To achieve this, a 16-point SyncLift system and 39 hydraulic jacks were used to synchronously lift the building onto the pylons. A 5.5-meter-long pylon was driven into the concrete foundation from the first floor, and brackets with double-acting hydraulic jacks were installed at the top of each pylon. Four threaded steel rods were passed through each pylon bracket and connected to a structure supporting the building's foundation. Additionally, the SyncLift system allowed the operator to monitor and control all jacks from a single touchscreen controller. *For more details, please refer to the PDF document or feel free to contact us.*
Provides clear feedback on distance traveled, stroke, and load per point!
At Oyu Tolgoi, one of the largest known copper and gold deposits in the world, there was a need to install steel linings in vertical ore bodies with a maximum diameter of 3 meters and depths of 30 to 70 meters, while seeking a safe and reliable solution that provides precision and synchronized control. Enerpac strand jacks, powered by electric or diesel-driven hydraulic power packs, fully control the lifting operations through their unique SCC-Smart Cylinder Control System. These are ideal for customers seeking precise synchronized control with the capability to lift heavy loads in an economical, compact, and reliable installation footprint. The company used four "HSL7006 strand jacks" for the installation of the steel linings. With automatic lock/unlock operations, the system is controlled by one operator from a central location, enhancing safety. It not only strengthens synchronized control during descent but also allows for fine adjustments during lowering to remove obstacles during installation. *For more details, please refer to the PDF document or feel free to contact us.*
1,500 tons of pulling power! Used for loading utility, drilling, and process modules!
The marine production facility is expected to be built in the Gulf of Mexico, positioned at a water depth of over 5,000 feet. To construct the tension leg platform, it was necessary to slide a module weighing approximately 7,000 tons into place. The "Enerpac strand jack" was used for the loading of utility, drilling, and process modules, providing a pulling force of 1,500 tons during the loading procedure. [Case Overview] ■ Client: Velard Transportation (Gulf of Mexico) ■ Product: Four HSL6500 strand jacks, 65kw hydraulic unit *For more details, please refer to the PDF document or feel free to contact us.
Faster and more efficient compared to screw jacks. It can be operated quickly and lightly by hand, has a compact design, and can hold loads without the need for a stopper, making it highly safe.
Unlike conventional screw jacks, this rack-type jack features an overwhelmingly fast rise and fall speed due to its high efficiency, making it easy to operate. It is equipped with a unique self-locking mechanism that allows it to hold loads without brakes or stoppers, making it a revolutionary jack. The rated thrust load is 50 kgf, and it can be operated easily by hand. It advances exactly 4 mm per rotation, allowing it to function as a round-number linear jack. With a significant advancement amount, it becomes a highly versatile rack jack and linear actuator. (For more details, please refer to catalog frame number SLM-050-4.0) *For more information, please visit our official website or feel free to contact us.
Compared to screw jacks, this is a hybrid type that allows for high speed and high efficiency, can be operated with commercially available electric tools, and can also be operated manually by attaching a handle.
Unlike conventional screw jacks, this rack-type jack features an overwhelmingly fast rise and fall speed due to its high efficiency, making it easy to operate. Therefore, it can be operated quickly with general electric tools (drivers/drills). It also comes equipped with a unique self-locking mechanism, allowing it to hold loads without brakes or stoppers, making it a revolutionary jack. Moreover, it is designed to be lightweight and compact while excelling in strength and durability. Additionally, it employs an omnidirectional actuator that can accommodate upward, downward, and lateral movements. It is also suitable for rack-type electric cylinders. This model has a rated thrust load of 100 kgf. *For more details, please visit the official website or feel free to contact us.*
It is a hybrid type that can be operated with commercially available electric tools due to its high speed and high efficiency compared to screw jacks, and can also be operated manually by attaching a handle.
Unlike conventional screw jacks, this rack-type jack features an overwhelmingly fast rise and fall speed due to its high efficiency, making it easy to operate. As a result, it can be operated quickly with common electric tools (drivers/drills). Equipped with a unique self-locking mechanism, this revolutionary jack can hold loads without brakes or stoppers. It is not only strong and durable but also designed to be lightweight and compact. Additionally, it employs an omnidirectional actuator that can accommodate upward, downward, and lateral movements. It is also ideal for rack-type electric cylinders, with a rated thrust load of 200 kgf and a reduction ratio of 63. *For more details, please visit our official website or feel free to contact us.
