inspection(ut) - List of Manufacturers, Suppliers, Companies and Products | IPROS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

inspection Product List

1～19 item / All 19 items

Displayed results
Non-destructive inspection with a drone: "UT inspection payload for ELIOS 3"

Non-destructive inspection with a drone: "UT inspection payload for ELIOS 3"

Non-destructive testing (UT inspection | ultrasonic thickness measurement) is possible with drones.

The UT inspection payload is a device developed in collaboration with Cygnus Instruments, the world's leading manufacturer of ultrasonic thickness gauges, by Flyability, the company that developed the "ELIOS 3," a drone capable of flying safely in indoor spaces. By using the ELIOS 3 equipped with the UT inspection payload, ultrasonic thickness measurements can be conducted remotely, safely, efficiently, and at low cost in inspection targets that traditionally required scaffolding or special equipment, such as plant facilities, infrastructure facilities (road bridges, tunnels, sewers, etc.), automotive and aircraft factories, and shipyards.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic Testing (UT)

Ultrasonic Testing (UT)

It is used for the butt welding joints of piping, tanks, and steel frames, as well as for the material inspection of rolled steel!

"UT" is an ultrasonic testing method that uses ultrasound to detect internal defects. It is highly portable but is susceptible to the influence of material, and depending on the type of material and the defects to be detected, the creation of test specimens may be necessary. It is used for inspecting butt welds in piping, tanks, and structural steel, as well as for material inspection of rolled steel. 【Features】 ■ Detects internal defects using ultrasound ■ Excellent portability ■ Usable for inspecting butt welds in piping, tanks, and structural steel, as well as for material inspection of rolled steel *For more details, please refer to the related link page or feel free to contact us.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrasonic testing (UT testing) suitable for internal inspection of forged products and similar items.

Ultrasonic testing (UT testing) suitable for internal inspection of forged products and similar items.

Accurately detecting defects in metallic materials and welds of nuclear power plants that are subject to evaluation.

Ultrasonic testing is conducted using equipment composed of a pulse generator, transducer, receiver, and display unit. Ultrasonic testing (UT) is utilized to accurately detect flaws in metallic materials and welds in nuclear power plants, as well as to evaluate defects subject to maintenance standards. 【Features】 ■ Applicable for checking the internal conditions of metal welds, forged products, etc. ■ Capable of detecting straightforward surface flaws (such as cracks) in the direction of ultrasonic propagation ■ Coarse-grained materials (austenitic mesh, castings) and lead are not permitted *For more details, please contact us or download the PDF for further information.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Phased Array Ultrasonic Testing (PAUT) Method

Phased Array Ultrasonic Testing (PAUT) Method

With electronic scanning, inspection is possible even in areas where mechanical scanning is difficult!

The "Phased Array Ultrasonic Testing (PAUT) method" is a technique that electronically controls numerous ultrasonic transducers within an array probe to set the propagation direction and focal position of the ultrasonic beam according to the inspection objectives. Since the received waveform data is visualized, it is easier to confirm the presence or absence of defects and accurately measure their dimensions. 【Features】 ■ Inspection is possible even in areas where mechanical scanning is difficult due to electronic scanning ■ By saving all flaw detection waveform data, objective and continuous evaluation is possible ■ By overlaying CAD drawings onto PAUT images, easily interpretable results can be provided *For more details, please refer to the PDF document or feel free to contact us.

  • Other measuring instruments
  • others
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japan-China Non-Destructive Testing Co., Ltd. "Non-Destructive Testing" Information

Japan-China Non-Destructive Testing Co., Ltd. "Non-Destructive Testing" Information

We conduct various non-destructive testing!

At Chūnichi Non-Destructive Testing Co., Ltd., we conduct "non-destructive testing" for inspections of welds in pipes and pressure vessels. We mainly offer "Radiographic Testing (RT)", "Ultrasonic Testing and Thickness Measurement (UT, UTT)", and "Penetrant Testing (PT)", among various other inspection targets. Our team of nine certified X-ray technicians provides friendly, careful, and reliable service, so please feel free to contact us. 【Examples of Inspection Targets】 ■ Welds in pipes and pressure vessels ■ Cast and forged products ■ Welds in various metals, etc. *For more details, please refer to our catalog or feel free to contact us.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Penetrant Testing (PT) Service

Penetrant Testing (PT) Service

Detect defects with penetrant!

Our company conducts penetrant testing (PT), where a penetrant is applied to the inspection object followed by a developer, allowing for the detection of defects such as cracks based on surface patterns. In addition, we perform various non-destructive tests, including radiographic testing (RT), where radiation (X-rays, gamma rays) is directed at the inspection object to project it onto a film, and ultrasonic testing (UT), where ultrasonic waves are directed into the inspection object. Please feel free to contact us if you have any requests. 【Our Inspection Services】 ■ Radiographic Testing (RT) ■ Ultrasonic Testing (UT) ■ Penetrant Testing (PT) ■ Magnetic Particle Testing (MT) *For more details, please download the PDF or contact us.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japan Inspex Co., Ltd. Technical Introduction

Japan Inspex Co., Ltd. Technical Introduction

Contributing to the maintenance of safety in a wide range of areas!

Nippon Inspex Co., Ltd. contributes to maintaining safety from the inspection and maintenance of chemical plants and large structures down to a single small bolt. We possess various technologies, including Penetrant Testing (PT), Magnetic Particle Testing (MT), and Ultrasonic Testing (UT). Additionally, we have an underground irradiation room in Osaka City (Kozu Testing Laboratory), allowing us to conduct various non-destructive tests, including X-ray inspections for items brought in. Please feel free to contact us. 【Technical Details】 ■ Penetrant Testing (PT) ■ Magnetic Particle Testing (MT) ■ Ultrasonic Testing (UT) ■ Radiographic Testing (RT) ■ Strain Measurement (SM) and others *For more details, please download the PDF or feel free to contact us.

  • Other construction services
  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explanatory Material: "Non-Destructive Testing You Can Ask About Now"

Explanatory Material: "Non-Destructive Testing You Can Ask About Now"

A clear introduction to the basics of penetrant testing and magnetic particle testing.

Our company, which manufactures and sells flaw detection devices for non-destructive testing, is currently offering explanatory materials on "Penetrant Testing (PT) Method and Magnetic Particle Testing (MT) Method." We provide a clear introduction to their respective features and principles, types of penetrants and testing agents, and examples of inspection targets. [Contents] ■ Representative testing methods for non-destructive testing ■ Features and principles of Penetrant Testing (PT) Method ■ Features and principles of Magnetic Particle Testing (MT) Method *For more detailed information, please refer to the "PDF Download." We are also currently showcasing a video introduction of the demo units for penetrant testing devices we have available.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kansai Engineer Co., Ltd. Business Introduction

Kansai Engineer Co., Ltd. Business Introduction

We provide services ranging from visual inspection and ultrasonic testing to material analysis and mechanical testing!

Kansai Engineer Co., Ltd. is a company that primarily conducts visual inspections and ultrasonic inspections of steel welds. We also handle welding management services, penetrant testing, and the dispatch of inspection technicians, as well as building inspections, including infrared surveys. Please feel free to contact us if you have any requests. 【Business Activities】 ■ Visual inspections and ultrasonic inspections of steel welds ■ Visual inspections and ultrasonic inspections of rebar joints ■ Welding management services ■ Penetrant testing ■ Dispatch of inspection technicians, etc. *For more details, please download the PDF or feel free to contact us.

  • Structural Survey
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing equipment achieves reduced inspection time and uniform accuracy in product inspection.

Non-destructive testing equipment achieves reduced inspection time and uniform accuracy in product inspection.

Reliability of inspection equipment from a penetrant manufacturer. Testing with demo units is also possible! Providing various types of flaw detection inspection equipment such as penetrant, magnetic particle, and ultrasonic to many industries.

This device is designed to inspect various sizes, quantities, shapes, and materials of inspection items, ranging from steel materials to small screws, with uniformity and high precision. Non-destructive testing is essential for products and parts that may suffer significant damage after delivery. We hope this will contribute to enhancing the competitiveness and quality of your products. *Note: Fluorescent penetrant testing equipment may also be referred to as Zygro, Keitan, or PT, while magnetic particle testing equipment may be called Jikitan, among others. The shapes and sizes of the devices vary, and we design and manufacture equipment that meets customer needs, including manual or automated inspection and transportation processes. The basic design features a side-by-side layout of each work booth, allowing for flexible configurations such as L-shaped or U-shaped arrangements to effectively utilize your valuable workspace and human resources. Simplified models, such as those with only a wash basin and dryer, are also available. We are always open to consultations regarding inspection methods, so please feel free to reach out. We will provide proposals, including whether or not the equipment is necessary. Additionally, we are always accepting requests for the use of demonstration units.

  • Non-destructive testing
  • Structural Survey
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
AI image recognition is changing inspections. Visual inspections are outdated now - 'Hutzper'.

AI image recognition is changing inspections. Visual inspections are outdated now - 'Hutzper'.

We will solve the labor shortage with fast, affordable, and skilled AI.

Inspector B: "Today, the inspection team of three is doing a visual inspection of bottled products. Wow, we have to check 10,000 bottles today; this is going to be tough... I wonder if we can get through all of it." Inspector C: "(Wow, there's a lot to inspect today... this is going to be a test of stamina.) B, we have a lot to check today! Let's do our best!" Inspector D: "Let's do our best! There are a lot of bottles, so we need to make sure we don't overlook any defective products." (Three days later) Quality Control Department Head: "Hey! There was a defect in the shipment from three days ago! What’s going on with the inspections!!!" Three Inspectors: "We are so sorry!!!!" "Hutzper" provides a one-stop solution from proposals for utilizing AI image recognition to demonstration experiments, model implementation, and full-scale operation. By entrusting inspections that are currently done by human eyes, such as visual inspections, to AI, we can address labor shortages and improve accuracy.

  • Information and communication equipment and infrastructure
  • Other Software
  • Measurement and Inspection
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welding Position Detection Sensor 【Makome Research Institute】 Metal Non-Destructive Testing

Welding Position Detection Sensor 【Makome Research Institute】 Metal Non-Destructive Testing

Welds that cannot be visually detected are identified using eddy currents. Detection is possible even under paint and plating (electroplating).

This product is an eddy current welding position detection sensor that utilizes changes in eddy currents at the target welding position. This product consists of a detection sensor (hereinafter referred to as the sensor) and a controller. The sensor converts the eddy current detection signal into a digital signal and communicates with the controller via serial data. The controller performs signal processing and threshold comparison. The comparison result is output as a switch signal. *If you lend us the workpiece, we will investigate whether detection is possible free of charge.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Phase One】Advanced flare stack inspection using drones

【Phase One】Advanced flare stack inspection using drones

Understanding the details from a safe distance! We will introduce inspection case studies.

This article is a Japanese translation of "Using Advanced Drone Solutions for Flare Stack Inspection," published on the website of Phase One (Denmark). The Belgian inspection service provider "SkyeBase" has extensive experience in supporting infrastructure asset owners and maintenance managers in managing critical infrastructure assets through drone and sensor-assisted inspections. *For more details, please refer to the PDF document or feel free to contact us. You can view the detailed content of the article through the related links.

  • Security cameras and surveillance systems
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing "Ultrasonic Testing (UT)"

Non-destructive testing "Ultrasonic Testing (UT)"

Confident in our technical skills, we play a role in ensuring safety and reliability through non-destructive testing. Trust the professionals who hold numerous technical qualifications.

Ultrasonic Thickness Measurement Ultrasonic thickness measurement is a method of measuring the thickness of an object from one side using ultrasonic waves. It is typically measured with a specialized device called an ultrasonic thickness gauge. Ultrasonic waves are sent from the measurement surface of the object, and the time taken for the reflection from the back surface to return is measured and converted into thickness. A sensor called a transducer (probe) is used to transmit and receive the ultrasonic waves. ◎ Implementation of Ultrasonic Thickness Measurement Ultrasonic thickness measurement is conducted in accordance with the standard "Thickness Measurement Method Using Ultrasonic Pulse Reflection" (JIS Z 2355). Additionally, the standard states that "the person conducting the measurement must have the necessary qualifications or equivalent sufficient knowledge, skills, and experience." The "necessary qualifications" referred to here typically means a qualified ultrasonic inspector certified by the Japan Non-Destructive Testing Association. *For more details, please contact us or refer to the catalog.

  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Platform "FlexScan System"

Platform "FlexScan System"

Faithfully digitize ultrasonic waveforms! Various features will be useful for application development.

"FlexScan" is a platform that supports 3D data collection, data analysis, and image display. It is useful for application development using traditional ultrasonic C-scan imaging, as well as electromagnetic ultrasound and laser ultrasound. Additionally, it supports multiple languages, allowing users involved in international collaborative research or domestic quality control to select a language according to their needs. The three types of high-speed A/D conversion boards form the core of this system and faithfully digitize ultrasonic waveforms. 【System Configuration】 ■Standard System X/Y/Z/T/A/R 3-6 Axis Scanner ■Precision Scanner X/Y/Z/T ■Large System X/Y/Z 3 Axis Scanner ■Wafer Inspection System ■Portable System 　Computer/Expansion/Pulser Receiver ■Shaft Inspection System *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean Room Filter Inspection ScanAirPro System

Clean Room Filter Inspection ScanAirPro System

It is a system based on a particle counter that can perform sampling on the upstream side as well as scanning on the downstream side of the filter.

The ScanAir Pro system is a scanning system based on a particle counter that allows for leak testing of HEPA/ULPA filters, as well as PTFE (Teflon), fiberglass, and other filter media. It is a simple and lightweight system unit. Not only does it check for leaks, but it also measures filter efficiency and serves as a system for scanning the filter media as part of cleanroom recovery testing.

  • Company：SGY 本社
  • Price：1 million yen-5 million yen
  • Environmental Survey
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-destructive testing ultrasonic flaw detection "Phased Array Testing"

Non-destructive testing ultrasonic flaw detection "Phased Array Testing"

Pioneering corrosion inspection!! It enables extensive inspections in a short time and allows for quantitative evaluation of damage and corrosion in steel materials!

Our company provides non-destructive testing technology services in the manufacturing stage, playing a role in ensuring safety and reliability. Phased array inspection utilizes ultrasonic testing methods, eliminating the need for surface preparation such as paint or rust removal, and allows for evaluation after data collection! It also excels in workability compared to conventional ultrasonic devices! (*Using Olympus model [Olympus Omniscan-MX2]) 【Features】 ◆ Reduction of inspection time 　⇒ Linear scanning allows inspection of a wide area at once without physically moving the probe. ◆ No surface preparation needed for paint or rust removal 　⇒ As it is ultrasonic testing, inspections can be conducted without altering the existing items. ◆ Clear reporting with images 　⇒ Equipped with a high-resolution large 10.4-inch touch screen, it also features high-speed data transfer capabilities. ◆ Quantitative evaluation of material thinning in steel 　⇒ It can map the distribution of material loss in pipes due to corrosion, wear, and erosion. 【Case Studies】 For more details, please contact us or download our catalog for further information.

  • Surveying
  • Non-destructive testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Through and Stop Screw Gauge" Plastic Resin Screw Inspection

"Through and Stop Screw Gauge" Plastic Resin Screw Inspection

"Through and Stop Thread Gauge" Plastic Resin Screw Inspection! We will teach you the method of inspecting plastic resin screws in a video!

We are a company specializing in plastic resins. We primarily perform machining by skillfully using general-purpose lathes, milling machines, NC lathes, and machining centers to cut round and sheet materials from raw materials. In cutting processes, we handle a wide range of tasks including three-dimensional machining and complex lathe processing using CAD/CAM, engraving, and gear manufacturing. In thermal processing, we perform welding and bending, while in manual processing, we offer polishing (buffing), adhesion, and assembly. Additionally, we also handle secondary processing of molded products, as well as processing of rubber, metal, non-ferrous materials, felt, and insulation boards. Before delivery, we conduct inspections using calipers, micrometers, pin gauges, block gauges, screw gauges, image dimension measuring instruments, three-dimensional measuring machines, and jigs to measure and check the items against the drawings. We pay close attention to dimension changes due to temperature differences, expansion due to water absorption, and distortions or warping related to shape and material, striving to meet customer requests as much as possible. We hope you will first get to know our company and gain a deeper understanding of our current responses. We will be distributing videos through YouTube that contribute to the development of manufacturing, so we appreciate your support. *For more details, please refer to the PDF materials or feel free to contact us.*

  • others
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Net Chaser LAN Cable Diagnostic Measurement Tester Inspection

Net Chaser LAN Cable Diagnostic Measurement Tester Inspection

"Made in the USA" With enhanced functionality, more efficient and effective! The top model that supports network communication diagnostics and speed measurement.

The NC950 model / NC950-AR model is a LAN cable checker that supports testing and speed measurement related to network circuits in one device, quickly solving the concerns and problems of those who do not want to carry multiple measuring instruments for communication work. ● Capable of handling everything from wiring status of LAN cables to connectivity tests in one device! It is equipped with all test functions that serve as indicators of network performance, including BER/SNR/SKEW/DHCP/PingP & URL Address/Traceroute/VLAN/PoE. ● Supports all tests related to network communication information and speed measurement. ● Supports continuity verification, wiring path exploration, and cable diagnostics up to 1G. ● Adopts a color touch panel for intuitive operation, significantly improving efficiency. ● Automatically saves measurement results, creates reports automatically, and allows easy file transfer and backup using an SD memory card or USB cable. ● Quickly grasp the position and information of devices that build the network, such as servers and switches. ● Complies with IEEE802.3, diagnosing wiring errors of TIA568A/B cables and faults in coaxial cables. By using a remote unit, it is possible to understand the relative positions of each connection port.

  • Unit and other construction
  • Electrical Equipment Testing
  • inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to inspection

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.