hardware Product List and Ranking from 33 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.

hardware Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.

  1. null/null
  2. タツミ Niigata//Building materials, supplies and fixtures manufacturers
  3. null/null
  4. 4 null/null
  5. 5 null/null
Go to Company Ranking

hardware Product ranking

Last Updated： Aggregation Period:Jul 30, 2025～Aug 26, 2025
This ranking is based on the number of page views on our site.

  1. Housing-related Hardware Catalog Vol. 31
  2. Window Hardware Catalog
  3. Comprehensive Catalog: Interior Hardware (Digest Version) アシスト
  4. 4 Partition and decorative hardware "Screen Pole 32 SP" made of brass.
  5. 5 Panel formwork hardware "Separat" タイヨー

hardware Product List

286～300 item / All 483 items

Displayed results
Japanese-style room large beam receiving hardware MO

Japanese-style room large beam receiving hardware MO

Support for 90mm and 105mm floor beams when they drop below the top of the horizontal members in Japanese-style rooms, etc.!

The "Large Beam Receiving Hardware MO for Japanese-style Rooms" is designed to accommodate large beams with dimensions of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. It is used when the beam level is between -1mm and -48mm. * For a beam level of 0mm, use the beam receiving hardware MH for rafters and large beams. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Accommodates large beams of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. ■ Used when the beam level is between -1mm and -48mm ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating * For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Base metal fitting CKB

Base metal fitting CKB

Used for the connection between the foundation and the column base! Lineup of "CKB-105" and "CKB-120".

The "Column Base Hardware CKB" is used for the connection between the foundation and the column base. *Please secure it with anchor bolts of strength grade 4.8 or higher. The surface treatment is JIS H 8641 hot-dip galvanized HDZ 35. We offer "CKB-105" and "CKB-120" in our lineup. 【Features】 ■ Used for the connection between the foundation and the column base ■ Material - Plate part (9mm-6mm): Equivalent to SPHC - Round bar part (φ21.7): Equivalent to 20CrMo - Dedicated washer: Equivalent to SPHC ■ Surface treatment: JIS H 8641 hot-dip galvanized HDZ 35 *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Base metal fittings MCK

Base metal fittings MCK

Basic packing specifications! Introducing column base hardware that can be used for joining column bases.

The "Column Base Hardware MCK" is a type of column base hardware used for the connection of column bases, designed with a foundation packing specification. We offer a lineup including "MCK-105CN" with dimensions of 105×300×355mm, as well as "MCK-120CN," "MCK-105ST," and "MCK-120ST" with dimensions of 120×307.5×370mm. 【Features】 ■ Used for the connection of column bases ■ Foundation packing specification ■ Material - Base part (4.5mm thick): JIS G 3101 SS400 - Base part (3.2mm thick): JIS G 3131 SPHC - Pipe part (φ21.7): JIS G 4053 SCM415 - Washer part: JIS G 3101 SS400 ■ Surface treatment - Entire column base hardware: Cationic electrodeposition coating - Round washer: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column base metal fittings MC

Column base metal fittings MC

A φ60 hole is drilled vertically into the foundation! Introducing the column base hardware coated with cationic electrodeposition paint.

The "Column Base Hardware MC" is used for the connection of column bases. The surface treatment is cationic electrodeposition coating. A φ60 hole is drilled vertically in the base for installation. We offer two types in our lineup: "MC-105" and "MC-120." 【Features】 ■ Used for the connection of column bases ■ Material - Pipe section (φ21.7): JIS G 4053 SCM415 - Base body (4.5mm thick): JIS G 3445 STKM 12C - Base bottom plate (9.0mm thick): JIS G 3131 SPHC - Washer (6.0mm thick): Equivalent to JIS G 3101 SS400 ■ Surface treatment: Cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Foundation joint hardware DT

Foundation joint hardware DT

Surface treatment specifications for hot-dip galvanized zinc (Z27)! Introducing the hardware used for joint connections of the foundation.

The "Foundation Joint Fitting DT" is used for joining foundation joints. The construction procedure involves inserting the DT into the foundation joint where the leading pin (on the lower end of the foundation) has been driven in, and then driving in two fixing pins to complete the process. The size available is 2.3×136×79 (mm). 【Features】 ■ Used for joining foundation joints ■ Material: JIS G 3302 SGHC ■ Surface treatment: Hot-dip galvanized (Z27) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ATS (Anchor Tie-Down System)

ATS (Anchor Tie-Down System)

It prevents the overturning of shear walls against the pulling forces generated during earthquakes and strong winds!

The "ATS (Anchor Tie-Down System)" is a system designed to suppress the overturning forces that buildings experience during earthquakes and typhoons. By connecting the shear walls on each floor with rods and securing the upper part of the shear walls with plate washers, it resists the pulling forces generated during earthquakes and strong winds. It prevents the overturning of shear walls and can withstand pulling forces exceeding 300 kN. 【Features】 ■ Capable of withstanding pulling forces exceeding 300 kN ■ Absorbs gaps between nuts and washers caused by the drying shrinkage and settling of wood ■ Uses deformed full-thread steel rods with a large screw pitch for anchor bolts and rods ■ Significantly improves workability compared to standard double-thread bolts *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components
  • Safety and consumables
  • Safety Supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Renovation Hagoita Set

Renovation Hagoita Set

It is possible to install without modifying the exterior wall or processing bolt holes!

The "Renovation Hagoita Set" is used for joining horizontal members and columns, as well as for connecting horizontal members to each other. When connecting existing building beams and girders, it can be installed without modifying the exterior walls or processing bolt holes. Due to the long section that receives the bolt threads, it is also sufficiently capable of pulling the horizontal members together. 【Features】 ■ Can be installed on beams perpendicular to the girders without drilling bolt holes ■ Allows for joining horizontal members without modifying the exterior walls ■ Long section that receives the bolt threads ■ Short-term standard joint strength: 11.9 kN *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector "Ribero II"

Double brace connector "Ribero II"

Reduced interference with floor sheathing and hold-down hardware! Bracing connection hardware for wall reinforcement with 2x and 3x strength.

The "Double Brace (Libero II)" is a brace joint hardware designed for wall shear resistance of 2 times and 3 times. It standardizes the use of screws to one type for ease of use and reduces interference with floor plywood and hold-down hardware. Additionally, the symmetrical shape of the hardware allows for installation without distinction between the top, bottom, left, and right of the brace. 【Features】 ■ Standardizes the use of screws to one type ■ Significantly improves work efficiency ■ Allows installation without distinction between the top, bottom, left, and right of the brace ■ Suitable for fixing braces on floor plywood (30mm thick or less) ■ Quality performance tested under the House Plus housing warranty *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1.5 times bracing connector (Libero)

1.5 times bracing connector (Libero)

Can be installed without distinction on the top, bottom, left, or right of the brace ends! Brace connection hardware for a wall multiplier of 1.5 times.

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for wall strength of 1.5 times, which can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, installation is possible even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required for attachment to the foundation ■ Installation possible even with floor plywood between the foundation and hardware ■ Can be installed without distinction in the upper, lower, left, or right ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector 'Double Brace (Try)'

Double brace connector 'Double Brace (Try)'

Can be installed in any direction: lightweight and compact brace connection hardware.

The "Double Brace (Try)" is used when joining 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and the standard dimensions of the hardware are symmetrical, allowing for installation in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware does not become exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Installable in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing Connector 'Double Bracing (Multi)'

Double Bracing Connector 'Double Bracing (Multi)'

No screws needed to fasten to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.

The "Double Brace (Multi)" does not require notching of columns or horizontal members, allowing for the connection of 45mm x 90mm braces (wall strength ratio of 2). Since screws for fastening to horizontal members are not needed, installation is possible even with floor plywood (thickness of 28mm or less). Additionally, the width of the hardware is 45mm, making it more accommodating for internal use. 【Features】 ■ No need to notch columns or horizontal members ■ No screws required for fastening to horizontal members ■ Installation is possible even with floor plywood ■ Better fit for internal use ■ Equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diagonal brace connection hardware 'Hexa Plate SD'

Diagonal brace connection hardware 'Hexa Plate SD'

The embossed processing prevents the screw heads from being visible! It is possible to directly attach materials like load-bearing panels over the hardware.

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when joining the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ No notching required due to the thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brace connection hardware 'B-Eaglet Double'

Brace connection hardware 'B-Eaglet Double'

Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where bracing comes at the edge of the joist. This product is used when joining the ends of bracing (wall strength ratio of 2x) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with bracing ■ Can be installed even in places where bracing comes at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing for Hardware Construction Method - Floor Plywood Version

Double Bracing for Hardware Construction Method - Floor Plywood Version

Used for floor plywood with a thickness of 30mm or less! It is a brace compatible with floor plywood for interior use.

The "Double Brace for Metal Construction Method, Floor Plywood Specification" is suitable for fixing braces on top of floor plywood (30mm thick or less). It is used when joining the ends of braces that are 45mm x 90mm or larger (with a wall multiplier of 2). The main metal body is attached to the floor plywood using four dedicated square bit screws TB-76 on the horizontal member side and four dedicated square bit screws TBA-45 on the column side. 【Features】 ■ Floor plywood specification ■ Usable for traditional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.78kN ■ Material: JIS G 3302 (hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate SD"

Column connection hardware "Flat Plate SD"

High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to hardware

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.