Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
46～60 item / All 161 items
VAD-SD001G.L1.xxx transmits 1 system Ethernet (10/100/1000M) over a single optical fiber up to 20 km.
VAD-SD001G.L1.xxx transmits a single Ethernet (10/100/1000M) signal up to 20 km away using a single optical fiber. The transmitted signal is not affected by electromagnetic waves generated by other devices or cables.
The VDS6702 transmits video signals, control signals (RS48), power, and UTC signals over long distances using a single coaxial cable!
The VDS6702 is a transmission device that combines one channel of video signal (AHD/HD-TVI/HDCVI/composite), one channel of RS485, UTC, and power into a single coaxial cable. The video signal is RF modulated, allowing for transmission that is resistant to noise. It transmits DC12V power and can supply up to 2A at a distance of 300 meters.
![[Case Study] I want to quickly notice abnormal occurrences! What is retrofitted centralized anomaly monitoring?](https://image.www.ipros.com/public/product/image/ff8/2000778045/IPROS77666409366181783016.png?w=280&h=280)
No need for routine inspections! If an anomaly occurs in any boiler equipment, the office's stacked indicator light will alert you!
In the customer's factory, there are three boiler facilities, and abnormalities are confirmed through daily patrol inspections. However, the locations of the boiler facilities are far away and very difficult to access. The office cannot detect abnormalities, and the patrol inspections are often delayed in noticing them, so there was a request to be aware of and respond to abnormalities as they occur. Therefore, we proposed the "LoRa wireless device," which enables wireless transmission of contact signals. This allows the abnormal signals from the scattered equipment to be checked in the office, eliminating the need for patrol inspections solely to confirm the presence of abnormalities. [Case Overview] ■ Issues - The boiler facilities are located far away and are very difficult to access. - The office cannot detect abnormalities, and patrol inspections are often delayed in noticing them. ■ Request: To be aware of and respond to abnormalities as they occur. ■ Proposal: LoRa wireless device. *For more details, please refer to the PDF document or feel free to contact us.
Can be built at low cost! Achieves high-quality sound bidirectional transmission via IP network!
"IP SOUND" is an IP audio conversion transmission device that enables bidirectional transmission of stereo sound over an IP network. It allows for the construction of broadcasting systems such as public announcements, background music, and communication hotlines at a low cost. By adopting XLR connectors, it enhances convenience for broadcasting equipment. Additionally, it can be easily transmitted over long distances via a router. 【Features】 ■ High reliability and support due to domestic production ■ Unique architecture to suppress audio dropouts ■ Easy system construction as no server is required ■ Support for audio systems combined with wireless LAN ■ Ideal for cost-effective construction of backup and master audio lines For more details, please refer to the catalog or feel free to contact us.
CONNEX has brought broadcasting quality and robustness standards to the rapidly evolving field of aerial imagery from UAVs.
CONNEX delivers excellent HD quality, zero latency, and top-level robustness.
![Usage example: [High quality (720P) uncompressed wireless device] with a 3-year warranty!](https://image.www.ipros.com/public/product/image/735/250512011/IPROS54268464204462869181.jpeg?w=280&h=280)
A long-selling product for business use for over 10 years! 100% free of time lag and freezing, compact and sturdy, energy-efficient, highly rated for its quality, made in Japan.
※ The key specification of industrial wireless devices is 100% no delay, not low delay. 【Features】 ★★ No time lag, no similar products, and non-compressed wireless devices! ◎ Comprehensive after-sales support! Compatible with a transmitter-receiver ratio of 1:n (∞). ★ Our non-compressed wireless devices can be used without delay in image-related equipment, image processing, surveillance systems, and image transmission devices. ★ The advantages of non-compressed video communication are 100% real-time "high quality (NTSC: 720P)" with no time lag or compression distortion between transmission and reception! [Features] ● Wireless devices that support everything from general specifications to professional specifications with no delay, certified for technical standards! ◆ The receiver is equipped with a high-brightness blue LED indicator to show the strength of the received signal. ● The transmission delay time between sending and receiving is on the order of μ (micro) seconds. ● Palm-sized, capable of continuous operation for 9 hours with a dedicated battery! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)
The features of a completely uncompressed wireless device are no freezing, delay time in the microsecond range, and visually, it is not low latency but "no latency." Made in Japan for your peace of mind!
*Contributes to monitoring systems, reliability improvement, and labor-saving; demo units available; made in Japan!* ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) **Features** ★ Our uncompressed wireless devices can be used without delay for image-related equipment, image processing, monitoring systems, and image transmission devices. ★ As an option, the receiver side can support high-quality video output (NTSC: 720p) to HD video output, and modifications to the transmitter and receiver are also possible. ★ "Interference countermeasures" can be reduced by using directional antennas and installation methods. **Specifications** ◎ Number of transmitter-receiver pairs = 1:n (∞) combinations possible! ◆ Already obtained technical compliance, no license required, with a 3-year warranty! ◆ Usable with any camera system; simply connect NTSC/PAL video, yellow, red, and white AV cables, and antennas. By the way, the transmission delay time is in the order of μ (micro) seconds. ◆ The receiver is equipped with an LED indicator that shows the strength of the received signal.
![Data and Video Transmission [100% No Delay, Uncompressed Wireless Equipment Delivery Case] River Survey](https://image.www.ipros.com/public/product/image/949/2000710546/IPROS82531304542342181160.png?w=280&h=280)
Customer Feedback: "I want to send high-definition images to the opposite shore without delay, not with low latency." Test results show no delay, battery operation for 7 hours is okay, and there is a demo unit available with zero communication costs!
For more details, please refer to the document "Use Cases for Uncompressed, Zero-Latency Wireless Equipment for Video and Audio." Our uncompressed wireless equipment can be utilized with image-related devices, image processing, surveillance systems, image transmission equipment, etc., with 100% zero latency. We would like to introduce a case where we delivered the zero-latency, high-definition video transmission wireless equipment "GTV-T1-B / GTV-R1-B" for the purpose of identifying hazardous areas in river surveys. The customer wanted to send high-definition video and audio to the opposite bank without any delay using a video camera. Therefore, we conducted a distance test with our product. As a result, there were no issues, and the customer was satisfied. [Case Overview] - Purpose: Identifying hazardous areas - Transmission side: Riverbed (1 person) - Reception side: Embankment (relay vehicle) - Distance: 200m If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)
![Report [Case Studies on Challenges in Remote Operation of Unmanned Construction Machinery] Demo unit available!](https://image.www.ipros.com/public/product/image/a7d/2000910067/IPROS91904685439567316247.jpeg?w=280&h=280)
Solving the challenges of remote control of robots, such as "compactness, energy efficiency, and the presence or absence of delay," with uncompressed radio equipment. Not a low-latency radio, but a 100% no-latency radio!
Our company's uncompressed wireless devices can be used 100% without delay for image-related equipment, image processing, monitoring systems, and image transmission devices. 【Overview of Uncompressed Wireless Device Specifications】 ★ Can be used for uncompressed, energy-saving transmission of video and audio in camera systems, demo units available! ★ The advantages of uncompressed video include high-quality images with no delay during transmission! ★ Compatible with various digital video signal connections! [Features] ● Unlike millimeter-wave wireless devices, the signal is stable and less likely to drop. ● Can bypass obstacles, and is more affordable than 25GHz and 60GHz wireless devices! ● No compression distortion (block distortion) from conventional technologies like MPEG2, 4, H264. ● High-gain antenna and relay transmission enable transmission distances of over 1 km. ● Significant performance differences compared to wireless LAN due to labor-saving, energy-saving contributions. ★ If you have any questions or concerns, please feel free to contact us via email or phone for a response! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)
This is a data communication device for remote monitoring telemetry. XEDC15 operates in the VHF band, while XEDC46 operates in the UHF band.
●XEDC15 (XEDC-15) / XEDC46 (XEDC-46) are digital simple radio data transmission devices manufactured by Alinco. They perform data communication in digital simple radio licensed stations (3A / 3B). ●Data connection is via RS-232C interface with a transmission speed of 4,800 bps (4-level FSK modulation). ●Voice communication is also possible. ●Main application examples: - Remote monitoring of dam and river conditions using still images - Remote monitoring of water levels, rainfall, temperature, and humidity - Transmission of position correction data via GPS ●The VHF band XEDC15 is ideal for mountainous areas and long-distance communication. The UHF band XEDC46 is suitable for use in areas with many channels and high radio usage. ●It is suitable for data communication in locations without internet access or outside mobile phone coverage. ●It can be used with DC12/24V. No DC-DC converter is required. *For more details, please refer to the PDF document or feel free to contact us.
CC-Link compatible! Introduction of the parallel remote spatial light transmission device.
The "SOT-CP801/CP803 series" can connect up to 64 units with a single master unit. Both types are available in head-on and side-on configurations to suit installation conditions, and communication on the optical side can be performed using our spatial optical transmission devices "SOT-NP801/803" type for sending and receiving. 【Features】 ■ Transmission capacity is 8-bit type ■ Transmission distance options of 0–1m and 0–3m ■ Available in head-on and side-on types to match installation conditions ■ Up to 64 units can be connected with a single master unit *For more details, please refer to the PDF document or feel free to contact us.
Network connectivity between distant buildings is possible without large-scale construction! Achieving cost reduction.
The "SOT-US160 series" is a spatial optical transmission device that connects Ethernet wirelessly via optical communication, enabling high-capacity communication without compromising quality. In the case of a transport control system, the cart side can be connected to the same network as the ground side, allowing for real-time communication. Additionally, if it is a sequencer control system on the same network, it enables not only regular data communication but also the ability to check and modify programs on the moving side, thereby improving maintainability. 【Features】 ■ Transmission speed: 100Mbps ■ Ethernet compatible ■ High-capacity communication without compromising quality ■ Uses near-infrared LEDs to achieve a communication distance of 100m ■ Improved maintainability *For more details, please refer to the PDF document or feel free to contact us.
High-resolution image distribution server! Compatible with ONVIF, allowing for flexible system construction according to various applications!
The "mmEye-HD" is a high-quality, low-latency IP image transmission device compatible with HD-SDI/NTSC cameras. It offers selectable image compression methods of H.264 and JPEG, and can simultaneously stream two types of streams. Additionally, we also offer the "mmEye-HD2," which supports ONVIF Profile S, T, and AI image detection functions. 【mmEye-HD Features】 ■ Supports Full-HD (1920×1080) to 320×240 ■ Wide bitrate range from 32kbps to 20Mbps ■ Compatible with ISDN lines and satellite phones ■ Remote control of cameras and pan-tilt heads via serial throughput function ■ Two-way audio (supports low-bandwidth to high-quality audio through AAC/Speex) ■ Low power consumption: approximately 5W, operates with natural air cooling (fanless) and no moving parts *For more details, please refer to the PDF document or feel free to contact us.
Function expansion is possible with a rich variety of interfaces such as serial and USB! It can support both high sound quality and low bandwidth.
The "mmEye-IPCS2" is an NTSC video transmission device that uses a high-compression codec (H.264). It transmits analog video from the encoder to the decoder over an IP network with high quality and low latency. It supports a wide range of bit rates from 32kbps to 20Mbps for high-quality images. 【Features】 ■ Transmits D1 (720×480) images with high quality and low latency ■ Simultaneous distribution of 2 types of streams ■ Wide range of bit rates from 32kbps to 20Mbps ■ Compatible with ISDN lines and satellite phones ■ Superimpose using kanji characters *For more details, please refer to the PDF document or feel free to contact us.
Achieving long-distance transmission with omnidirectional + beamforming! Uninterrupted video transmission.
The 'Online Air Bridge' is ideal for video surveillance between distant locations using high-performance wireless equipment. The transmission distance is up to 3.5 km, with a maximum of 128 channels for receiving and 32 channels for transmitting, all with low latency. This system allows for real-time video surveillance using security cameras across elevators, multiple factory buildings, forests, rivers, railways, and roads, all at a low cost and with ease of implementation. [Features] ■ Easy-to-implement price range ■ Significant reduction in construction costs ■ Waterproof and dustproof ■ Simple installation and setup ■ Long-distance, high-capacity video transmission *For more details, please refer to the PDF document or feel free to contact us.
