Transmitters Product List and Ranking from 29 Manufacturers, Suppliers and Companies | IPROS

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

Transmitters Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. ジョブル Kanagawa//others
  2. メディアリンクス Kanagawa//others
  3. 高砂製作所 Kanagawa//others
  4. 4 e431 Hyogo//Trading company/Wholesale
  5. 4 エクセリ 本社 Tokyo//Trading company/Wholesale

Transmitters Product ranking

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Optical Wavelength Multiplex Transmission Device 'MD003' メディアリンクス
  2. Analog stereo audio CAT5e transmitter AE02 ジョブル
  3. Power Line Communication Device 'BDE-2C41A' e431
  4. 4 IP audio conversion transmission device "IP SOUND" 高砂製作所
  5. 5 Outdoor wireless transmission device "G-Wave" [NETIS registered] GRIFFY

Transmitters Product List

31~60 item / All 151 items

Displayed results

4K HDMI, USB, RS232C, infrared, audio IP transmitter

HKM02BPx-4K that transmits up to 4K HDMI, RS232C, USB, infrared remote control signals, and analog audio over Ethernet!

The HKM02BPx-4K transmits up to 4K HDMI, bidirectional RS232C, USB, infrared remote control signals, and analog audio over IP (Ethernet). (Supports PoE power receiving) - The transmitter and receiver operate with PoE power receiving. When connected using a PoE switch, no power adapter is required. - It supports input up to 2160p 60Hz (3840×2160). (The output can be converted to any resolution with a maximum of 2160p 30Hz.) - The maximum transmission distance is 150m with a CAT6 cable. - It supports control of the transmitter using RS232C. - It is compatible with HDCP 1.4/2.2. - HDMI audio supports LPCM 7.1ch 192kHz. - It supports bidirectional analog audio communication (in unicast mode). - Bidirectional transmission of infrared remote control signals is possible. - The transmitter (HKM02BPT-4K) also supports loop output of the input video signal. - The receiver (HKM02BPR-4K) is equipped with a USB hub. * The transmitter and receiver are sold separately (power adapter included).

  • Other PCs and OA equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HDMI・USB CAT5e Transmitter HKM01E

HKM01E transmits HDMI signals and USB 2.0 over a single LAN cable!

The HKM01E transmits HDMI signals and USB 2.0 over a single LAN cable. - Supports a maximum resolution of 1920x1200 - Can transmit up to 120m using CAT5e/6 UTP/STP 4-pair cables *The USB devices that can be used are limited to keyboards and mice only.

  • Other PCs and OA equipment
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4K HDMI, USB, audio, IR, RS232 CAT5e transmitter

The HKM01-4K transmits up to 4K HDMI and USB, analog audio, infrared remote control signals, and RS232C through a single LAN cable!

HKM01-4K transmits up to 4K HDMI and USB, analog audio, infrared remote control (IR) signals, and RS232C over a single LAN cable. - Supports HDMI signals up to 4K 30Hz 4:4:4 - The receiver is equipped with a 4-port USB hub compatible with USB 2.0 - Supports simultaneous bidirectional analog audio transmission - Maximum transmission distance is 140m with CAT6 cable - Compatible with HDCP 1.4

  • Other PCs and OA equipment
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PoE Plus compatible Ethernet long-distance transmitter NES-600P

NES-600P for long-distance transmission of Ethernet using PoE/PoE Plus via LAN cable!

The NES-600P transmits Ethernet over long distances using PoE/PoE Plus via LAN cables. - It is a set of modules for the PD (Powered Device) side and the PSE (Power Sourcing Equipment) side. - It can transmit up to 600 meters without using a relay with CAT5e or higher LAN cables. - It can achieve a maximum transmission speed of approximately 20 Mbps (from IP camera to switch).

  • Security cameras and surveillance systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HDMI・IR Signal IP Transmitter JVHDI-0150M

JVHDI-0150M can transmit HDMI signals and infrared remote control signals up to 150m using CAT5e/CAT6 cables!

The JVHDI-0150M is a transmitter that extends HDMI signals and infrared remote control signals up to 150 meters using CAT5e/CAT6 cables. - Transmits up to 150 meters of HDMI signals (video/audio) at a maximum of 1080p and infrared remote control signals over a single LAN cable. - Compatible with HDMI 1.3. - Video is compressed using H.264 and transmitted at a bitrate of approximately 8 Mbps. - By using a multicast-compatible Ethernet switch (sold separately), one-to-many video distribution is also possible. - The transmitter features an HDMI loop output function. - No setup is required; it can be used simply by connecting it.

  • Other security systems
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Composite video + RS232C + RS485 + 2 audio signal optical transmission device

VAD-i122A.xx.35, which transmits composite video from system 1, serial signals from system 2, and audio signals from system 2 over a single optical fiber!

The VAD-i122A.xx.35 transmits one channel of composite video, two channels of serial signals, and two channels of audio signals over single-mode optical fiber up to 20 km and multi-mode optical fiber up to 1 km. Since the signals are digitally converted for transmission, there is no attenuation due to distance.

  • Security cameras and surveillance systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analog HD compatible 8-channel video and RS485 optical transmission device HD401F8-5M

HD401F8-5M can transmit AHD/HD-TVI/HDCVI/CVBSx8 video and RS485x1 over a single fiber optic cable up to 20 km!

The HD401F8-5M is a fiber optic multiplex transmission device that transmits up to 20 km using a single fiber optic cable, supporting AHD/HD-TVI/HDCVI/CVBS (composite) x8 video (mixed use possible) and RS485 x1 system. - Transmission is done between the transmitter (HD401F8T-5M) and the receiver (HD401F8R-5M). - Analog HD (AHD/HD-TVI, etc.) video supports 720p (30/25Hz), 1080p (30/25Hz), 4MP, and 5MP. - RS485 supports a maximum of 19200bps in a 2-wire configuration (only in the receiver to transmitter direction). - The fiber optic connection is single-mode x1 with an FC connector. - Power adapter included.

  • Security cameras and surveillance systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4-channel contact signal serial transmission device VAD-4CC-xx

VAD-4CC-xx, which transmits four sets of contact signals using the RS232/422/485 (serial signals) of system 1!

The VAD-4CC-xx is a serial transmission device that utilizes one system of RS232/422/485 (serial signals) to transmit up to four systems of contact signals. It converts/transmits using the VAD-4CC-TC (transmitter) and VAD-4CC-RC (receiver). *It can be used with UTP cables, optical fiber cables, coaxial cables, etc., that can transmit serial signals. (If transmitting via optical fiber cables or coaxial cables, a separate transmitter is required.) - When using UTP cables for RS422/485 signals, the VAD-4CC-xx alone can transmit contact signals up to 1,200 meters. - The input signals support voltage (5V/0V) and non-voltage contacts. - It can be integrated into a 19-inch rack (maximum of 16 units) using a 19-inch rack mount chassis (sold separately).

  • Security Sensor Systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1 system contact signal serial transmission device VAD-1CC.3A

VAD-1CC.3A, which transmits one channel of contact signals bidirectionally using the RS232 signal of system 1!

VAD-1CC.3A is a serial transmission device that transmits one channel of contact signals bidirectionally by connecting two units via RS232 signals. It can be used with transmission equipment such as optical fibers and LAN cables that support RS232 signals (for long-distance transmission). - Since it uses RS232 signals, it supports bidirectional simultaneous transmission. - The input signals are compatible with voltage (5V/0V) and non-voltage contacts. *Please note that the RS232 signals of VAD-1CC have some special specifications, which may limit the compatible devices. (For details, please contact us.)

  • Security Sensor Systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Composite 1 Video Optical Transmission Device VAD-i100.xx

Optical transmission device VAD-i100.xx that transmits composite video signals of system 1 up to 20 km in single mode and up to 3 km in multi-mode!

The VAD-i100.xx transmits a single composite video signal up to 20 km using single-mode optical fiber and up to 3 km using multi-mode optical fiber. The video is transmitted after digital conversion, ensuring no degradation in image quality during transmission.

  • Security cameras and surveillance systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PoE++ compatible LAN cable IP long-distance transmitter IP09P

IP09P transmits Ethernet and power (PoE) over long distances with a single LAN cable!

The IP09P is a transmitter that transmits Ethernet and power (PoE) over long distances using a single LAN cable (CAT5e or higher). It transmits using the IP09PT (Transmitter) and IP09PR (Receiver). It can transmit 100M Ethernet up to 500m and 10M Ethernet up to 800m.

  • Security cameras and surveillance systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

RS232C CAT5e Long Distance Transmitter RS002E

RS002E, which transmits serial signals RS232C over CAT5e/6 cables (LAN cables) up to 2,000m!

RS002E transmits RS232C (Dsub9) over CAT5e/6 LAN cables for long-distance transmission. - The maximum transmission distance is 2,000m. - Communication is possible at a maximum of 115200bps.

  • Other security systems
  • Other PCs and OA equipment
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ethernet Powerline Transmission Device VDL4000N

Transmit Ethernet and power (DC12V) over long distances with a single coaxial cable! The VDL4000N transmission device is effective for installing IP cameras and more!

The VDL4000N transmits Ethernet and power necessary for IP camera installation using coaxial cables. - It supports 10BASE-T/100BASE-TX Ethernet, with a maximum bidirectional communication speed of 60 Mbps. - For 5C-FB cables, it can supply DC12V 1A at 800m and 2.5A at 400m. - The power can also be used for devices other than cameras, allowing for the installation of infrared illuminators, sensors, microphones, etc. * It cannot be used with PoE-only cameras or cameras that require DC12V power. * The VDL4000N is not compatible with the VDL4000 (discontinued product).

  • Security cameras and surveillance systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2 audio + RS232C + RS485 + 2 contact signal optical fiber transmission device

Optical transmission device ADR222.L1x that enables bidirectional transmission of voice/serial/contact signals over a single optical fiber!

The ADR222.L1.x allows for bidirectional transmission of 2 audio signals + RS232C + RS485 + 2 contact signals over a single optical fiber. - The optical fiber can transmit up to 20 km in single mode and up to 2 km in multi-mode. - Transmission is achieved by using ADR222.L1A (transmitter) and ADR222.L1B (receiver) in pairs. - Audio is digitally sampled at LINE level (unbalanced) at 96 kHz. - It has a wide operating temperature range of -20 to 75°C. - Up to 14 units can be housed in a 19-inch rack mount chassis "VAD-RACK-14-4U" for rack mounting installation. *Note: "ADR222.L1A" and "ADR222.L1B" are sold separately and not as a set.

  • Other security systems
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

10/100/1000M Ethernet optical fiber transmission device

VAD-SD001G.L1.xxx transmits 1 system Ethernet (10/100/1000M) over a single optical fiber up to 20 km.

VAD-SD001G.L1.xxx transmits a single Ethernet (10/100/1000M) signal up to 20 km away using a single optical fiber. The transmitted signal is not affected by electromagnetic waves generated by other devices or cables.

  • Other PCs and OA equipment
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Video + RS485 + UTC + Power Overlay Transmission Device VDS6702

The VDS6702 transmits video signals, control signals (RS48), power, and UTC signals over long distances using a single coaxial cable!

The VDS6702 is a transmission device that combines one channel of video signal (AHD/HD-TVI/HDCVI/composite), one channel of RS485, UTC, and power into a single coaxial cable. The video signal is RF modulated, allowing for transmission that is resistant to noise. It transmits DC12V power and can supply up to 2A at a distance of 300 meters.

  • Security cameras and surveillance systems
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

USB3.2 Gen1/RS232C compatible CAT6A long-distance transmitter

USB3.2 Gen1/RS232C compatible CAT6A long-distance transmitter UE03H!

UE03H supports USB 3.2 Gen 1 and transmits data at a maximum of 5 Gbps and RS232C over CAT6A/7 LAN cables up to 100 meters. By using the included components, it can be mounted on a panel or DIN rail.

  • Other PCs and OA equipment
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4K 60Hz HDMI, USB, audio, IR, RS232C transmitter

Maximum 4K 60Hz HDMI and USB, audio, IR signal, and RS232C transmission up to 100m with a single LAN cable HKM01-4K6G!

The HKM01-4K6G is a transmitter that can transmit up to 4K 60Hz HDMI, USB, audio, IR signals, and RS232C over a single LAN cable (CAT6A) up to 100 meters. You can connect devices such as a mouse, keyboard, flash disk, and hard disk to its four USB ports. Additionally, by using an Ethernet switch to distribute the signal, you can expand the system with multiple receivers (HKM01R-4K6G) for simultaneous display on multiple monitors.

  • Other commercial buildings and service facilities
  • Information and communication equipment and infrastructure
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optical Fiber IP Transmission Device (Supports 10/100/1000M)

Long-distance transmission device IP01F that transmits Ethernet (10/100/1000M compatible) over fiber optic up to 20 km away!

The IP01F transmits Ethernet (supporting 10/100/1000Mbps) over fiber optic cable up to 20km away. It communicates by using IP01FA and IP01FB in opposition. *This is a set of "IP01FA" and "IP01FB". The shapes are exactly the same, but communication is only possible with the pair of IP01FA ⇔ IP01FB. - The transmission cable is a single-mode fiber with one strand (SC connectors on both ends) and can reach up to 20km. - The operating temperature range is wide, from -40 to 75°C. - It can be fixed to a panel surface or DIN rail using the included mounting materials. - A power adapter is included.

  • Internet System
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HDMI Fiber Optic Compact Transmission Device (4K 60Hz Compatible)

HDMI Fiber Optic Compact Transmission Device (4K 60Hz Compatible for Multi-Mode) HE01FE-4K6G!

The HE01FE-4K6G transmits HDMI signals up to 4K 60Hz over multi-mode fiber optic cable for distances up to 300m. The unit is compact in size and features an integrated HDMI Type A plug cable for direct connection to video equipment.

  • Audio and video equipment
  • Other security systems
  • Other PCs and OA equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

10/100/1000M IP optical transmission device (with built-in 2-port HUB)

10/100/1000M Ethernet fiber optic transmission device VAD-SD002G.L2.TRC with a built-in 2-port hub and 2-core transmission type!

The VAD-SD002G.L2.TRC transmits a single Ethernet (10/100/1000M) signal up to 20 km away via fiber optic. This transmission device has a 2-port switching hub function, allowing for the connection of two network devices. - It transmits a single 10/100/1000M Ethernet signal over two fiber optic cables for long-distance transmission. - It supports a maximum transmission distance of 1 km in multimode and 20 km in single mode. - It has a built-in Ethernet switch function (2 ports) that allows for the connection of two LAN cables. * Cables connected to the RJ45 are treated as part of the same network, enabling communication between connected devices. (The two systems cannot be treated as independent networks.) - It operates on DC 9-12V (power adapter included). - When installing multiple units, a separately sold 19-inch rack mount chassis can be used for consolidated installation. * Two VAD-SD002G.L2.TRC units are installed at both ends of the fiber optic cable for use. * Sales are in units of one, but two units are required for opposing use.

  • Internet System
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] I want to quickly notice abnormal occurrences! What is retrofitted centralized anomaly monitoring?

No need for routine inspections! If an anomaly occurs in any boiler equipment, the office's stacked indicator light will alert you!

In the customer's factory, there are three boiler facilities, and abnormalities are confirmed through daily patrol inspections. However, the locations of the boiler facilities are far away and very difficult to access. The office cannot detect abnormalities, and the patrol inspections are often delayed in noticing them, so there was a request to be aware of and respond to abnormalities as they occur. Therefore, we proposed the "LoRa wireless device," which enables wireless transmission of contact signals. This allows the abnormal signals from the scattered equipment to be checked in the office, eliminating the need for patrol inspections solely to confirm the presence of abnormalities. [Case Overview] ■ Issues - The boiler facilities are located far away and are very difficult to access. - The office cannot detect abnormalities, and patrol inspections are often delayed in noticing them. ■ Request: To be aware of and respond to abnormalities as they occur. ■ Proposal: LoRa wireless device. *For more details, please refer to the PDF document or feel free to contact us.

  • Construction and process management software
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IP audio conversion transmission device "IP SOUND"

Can be built at low cost! Achieves high-quality sound bidirectional transmission via IP network!

"IP SOUND" is an IP audio conversion transmission device that enables bidirectional transmission of stereo sound over an IP network. It allows for the construction of broadcasting systems such as public announcements, background music, and communication hotlines at a low cost. By adopting XLR connectors, it enhances convenience for broadcasting equipment. Additionally, it can be easily transmitted over long distances via a router. 【Features】 ■ High reliability and support due to domestic production ■ Unique architecture to suppress audio dropouts ■ Easy system construction as no server is required ■ Support for audio systems combined with wireless LAN ■ Ideal for cost-effective construction of backup and master audio lines For more details, please refer to the catalog or feel free to contact us.

  • Audio equipment
  • Audio and video equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-Definition Wireless Image Transmission Device AMIMON CONNEX

CONNEX has brought broadcasting quality and robustness standards to the rapidly evolving field of aerial imagery from UAVs.

CONNEX delivers excellent HD quality, zero latency, and top-level robustness.

  • Pile and foundation work
  • Railway Construction
  • Security cameras and surveillance systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Usage example: [High quality (720P) uncompressed wireless device] with a 3-year warranty!

A long-selling product for business use for over 10 years! 100% free of time lag and freezing, compact and sturdy, energy-efficient, highly rated for its quality, made in Japan.

※ The key specification of industrial wireless devices is 100% no delay, not low delay. 【Features】 ★★ No time lag, no similar products, and non-compressed wireless devices! ◎ Comprehensive after-sales support! Compatible with a transmitter-receiver ratio of 1:n (∞). ★ Our non-compressed wireless devices can be used without delay in image-related equipment, image processing, surveillance systems, and image transmission devices. ★ The advantages of non-compressed video communication are 100% real-time "high quality (NTSC: 720P)" with no time lag or compression distortion between transmission and reception! [Features] ● Wireless devices that support everything from general specifications to professional specifications with no delay, certified for technical standards! ◆ The receiver is equipped with a high-brightness blue LED indicator to show the strength of the received signal. ● The transmission delay time between sending and receiving is on the order of μ (micro) seconds. ● Palm-sized, capable of continuous operation for 9 hours with a dedicated battery! ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

  • Pipeline Construction
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Usage example: Wireless device for real-time, uncompressed video and audio with a 3-year warranty, made in Japan!

The features of a completely uncompressed wireless device are no freezing, delay time in the microsecond range, and visually, it is not low latency but "no latency." Made in Japan for your peace of mind!

*Contributes to monitoring systems, reliability improvement, and labor-saving; demo units available; made in Japan!* ★★ If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond immediately! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato) **Features** ★ Our uncompressed wireless devices can be used without delay for image-related equipment, image processing, monitoring systems, and image transmission devices. ★ As an option, the receiver side can support high-quality video output (NTSC: 720p) to HD video output, and modifications to the transmitter and receiver are also possible. ★ "Interference countermeasures" can be reduced by using directional antennas and installation methods. **Specifications** ◎ Number of transmitter-receiver pairs = 1:n (∞) combinations possible! ◆ Already obtained technical compliance, no license required, with a 3-year warranty! ◆ Usable with any camera system; simply connect NTSC/PAL video, yellow, red, and white AV cables, and antennas. By the way, the transmission delay time is in the order of μ (micro) seconds. ◆ The receiver is equipped with an LED indicator that shows the strength of the received signal.

  • Audio and video equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Data and Video Transmission [100% No Delay, Uncompressed Wireless Equipment Delivery Case] River Survey

Customer Feedback: "I want to send high-definition images to the opposite shore without delay, not with low latency." Test results show no delay, battery operation for 7 hours is okay, and there is a demo unit available with zero communication costs!

For more details, please refer to the document "Use Cases for Uncompressed, Zero-Latency Wireless Equipment for Video and Audio." Our uncompressed wireless equipment can be utilized with image-related devices, image processing, surveillance systems, image transmission equipment, etc., with 100% zero latency. We would like to introduce a case where we delivered the zero-latency, high-definition video transmission wireless equipment "GTV-T1-B / GTV-R1-B" for the purpose of identifying hazardous areas in river surveys. The customer wanted to send high-definition video and audio to the opposite bank without any delay using a video camera. Therefore, we conducted a distance test with our product. As a result, there were no issues, and the customer was satisfied. [Case Overview] - Purpose: Identifying hazardous areas - Transmission side: Riverbed (1 person) - Reception side: Embankment (relay vehicle) - Distance: 200m If you have any questions or technical issues, please feel free to contact us by email or phone. We will respond! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

  • Audio and video equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Report [Case Studies on Challenges in Remote Operation of Unmanned Construction Machinery] Demo unit available!

Solving the challenges of remote control of robots, such as "compactness, energy efficiency, and the presence or absence of delay," with uncompressed radio equipment. Not a low-latency radio, but a 100% no-latency radio!

Our company's uncompressed wireless devices can be used 100% without delay for image-related equipment, image processing, monitoring systems, and image transmission devices. 【Overview of Uncompressed Wireless Device Specifications】 ★ Can be used for uncompressed, energy-saving transmission of video and audio in camera systems, demo units available! ★ The advantages of uncompressed video include high-quality images with no delay during transmission! ★ Compatible with various digital video signal connections! [Features] ● Unlike millimeter-wave wireless devices, the signal is stable and less likely to drop. ● Can bypass obstacles, and is more affordable than 25GHz and 60GHz wireless devices! ● No compression distortion (block distortion) from conventional technologies like MPEG2, 4, H264. ● High-gain antenna and relay transmission enable transmission distances of over 1 km. ● Significant performance differences compared to wireless LAN due to labor-saving, energy-saving contributions. ★ If you have any questions or concerns, please feel free to contact us via email or phone for a response! Contact: https://efg94764.p-kit.com/page0010.html TEL=090-4425-4901 (Kato)

  • Elevator
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Digital Simple Radio License Station 'XEDC15 / XEDC46'

This is a data communication device for remote monitoring telemetry. XEDC15 operates in the VHF band, while XEDC46 operates in the UHF band.

●XEDC15 (XEDC-15) / XEDC46 (XEDC-46) are digital simple radio data transmission devices manufactured by Alinco. They perform data communication in digital simple radio licensed stations (3A / 3B). ●Data connection is via RS-232C interface with a transmission speed of 4,800 bps (4-level FSK modulation). ●Voice communication is also possible. ●Main application examples: - Remote monitoring of dam and river conditions using still images - Remote monitoring of water levels, rainfall, temperature, and humidity - Transmission of position correction data via GPS ●The VHF band XEDC15 is ideal for mountainous areas and long-distance communication. The UHF band XEDC46 is suitable for use in areas with many channels and high radio usage. ●It is suitable for data communication in locations without internet access or outside mobile phone coverage. ●It can be used with DC12/24V. No DC-DC converter is required. *For more details, please refer to the PDF document or feel free to contact us.

  • XEDC15XEDC46-2.jpg
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IP image transmission device "mmEye-HD/mmEye-HD2"

High-resolution image distribution server! Compatible with ONVIF, allowing for flexible system construction according to various applications!

The "mmEye-HD" is a high-quality, low-latency IP image transmission device compatible with HD-SDI/NTSC cameras. It offers selectable image compression methods of H.264 and JPEG, and can simultaneously stream two types of streams. Additionally, we also offer the "mmEye-HD2," which supports ONVIF Profile S, T, and AI image detection functions. 【mmEye-HD Features】 ■ Supports Full-HD (1920×1080) to 320×240 ■ Wide bitrate range from 32kbps to 20Mbps ■ Compatible with ISDN lines and satellite phones ■ Remote control of cameras and pan-tilt heads via serial throughput function ■ Two-way audio (supports low-bandwidth to high-quality audio through AAC/Speex) ■ Low power consumption: approximately 5W, operates with natural air cooling (fanless) and no moving parts *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration