Transmitters Product List and Ranking from 29 Manufacturers, Suppliers and Companies | IPROS

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

Transmitters Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. ジョブル Kanagawa//others
  2. メディアリンクス Kanagawa//others
  3. 高砂製作所 Kanagawa//others
  4. 4 e431 Hyogo//Trading company/Wholesale
  5. 4 エクセリ 本社 Tokyo//Trading company/Wholesale

Transmitters Product ranking

Last Updated: Aggregation Period:Jan 28, 2026~Feb 24, 2026
This ranking is based on the number of page views on our site.

  1. Optical Wavelength Multiplex Transmission Device 'MD003' メディアリンクス
  2. Analog stereo audio CAT5e transmitter AE02 ジョブル
  3. Power Line Communication Device 'BDE-2C41A' e431
  4. 4 IP audio conversion transmission device "IP SOUND" 高砂製作所
  5. 5 Outdoor wireless transmission device "G-Wave" [NETIS registered] GRIFFY

Transmitters Product List

61~90 item / All 151 items

Displayed results

NTSC video transmission device 'mmEye-IPCS2'

Function expansion is possible with a rich variety of interfaces such as serial and USB! It can support both high sound quality and low bandwidth.

The "mmEye-IPCS2" is an NTSC video transmission device that uses a high-compression codec (H.264). It transmits analog video from the encoder to the decoder over an IP network with high quality and low latency. It supports a wide range of bit rates from 32kbps to 20Mbps for high-quality images. 【Features】 ■ Transmits D1 (720×480) images with high quality and low latency ■ Simultaneous distribution of 2 types of streams ■ Wide range of bit rates from 32kbps to 20Mbps ■ Compatible with ISDN lines and satellite phones ■ Superimpose using kanji characters *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Disaster Prevention Video and Audio Transmission Device "Air Bridge on the Line"

Achieving long-distance transmission with omnidirectional + beamforming! Uninterrupted video transmission.

The 'Online Air Bridge' is ideal for video surveillance between distant locations using high-performance wireless equipment. The transmission distance is up to 3.5 km, with a maximum of 128 channels for receiving and 32 channels for transmitting, all with low latency. This system allows for real-time video surveillance using security cameras across elevators, multiple factory buildings, forests, rivers, railways, and roads, all at a low cost and with ease of implementation. [Features] ■ Easy-to-implement price range ■ Significant reduction in construction costs ■ Waterproof and dustproof ■ Simple installation and setup ■ Long-distance, high-capacity video transmission *For more details, please refer to the PDF document or feel free to contact us.

  • Radios, walkie-talkies, and intercoms
  • Wi-Fi router
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1.2GHz/2.3GHz Optical Transmission FPU 'ROF352'

By separating the antenna and receiver, the diversity effect is enhanced. No power installation required.

The "ROF352" is a device that transmits FPU waves in the 1.2GHz/2.3GHz band via optical transmission. Since the antenna and FPU receiver can be separated, the receiver can be installed in a location that is easy to operate. It can also enhance the diversity effect. Power is supplied from the O/E side to the E/O side through an optical camera cable, allowing for a speedy installation without the need for power construction. 【Features】 ■ Antenna and FPU receiver can be installed separately ■ Contributes to the improvement of diversity effect ■ No need for power construction *You can view the product documentation from "PDF Download." Please feel free to contact us for inquiries.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Information transmission device (step type)

The Communication Management Department (CMU-2) can connect 5 lines, with a maximum of 100 transmission units (CCU-2) connected per line.

The "Information Transmission Device (Step Type)" is a device that allows reading, playback, and analysis of data from the information memory (VAM) storage unit, VAM32, via a transmission line (metal line) controlled by the district device. Faults occurring on-site can be confirmed at the district device. Additionally, information (recorded data from VAM) at the time of fault occurrence can be automatically retrieved. Our company conducts development design and manufacturing (prototyping and mass production) utilizing the technology of LED selection and circuit board layout cultivated through railway signal and display equipment. We solve your problems such as "I want a warning device like this" or "Can we make something like this with LEDs?" so please feel free to contact us. 【Features】 ■ The Communication Management Unit (CMU-2) can connect up to 5 lines, allowing a maximum of 100 transmission units (CCU-2) per line. ■ The transmission unit has 12 channels for fault information input and 4 channels for relay contact output. ■ The communication management unit is a stationary type, while the transmission unit is installed in the space for F-type relays. *For more details, please download the PDF or feel free to contact us.

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contact Information Transmission Device 'OST-716BIV' <IP Type>

Various maintenance can be performed using a web browser! Introducing contact information transmission devices and SNMP monitoring control terminals.

We would like to introduce our IP type product, the 'OST-716BIV model'. This product is a device that transmits contact information using an IP line as the transmission path, and it allows for the expansion of slave devices to increase the number of contacts (DI, DO). Additionally, it supports the SNMP protocol, enabling monitoring and control via an SNMP manager. 【Features】 ■ Transmission of 16 points of contact information using the basic configuration (master device) ■ Expansion of slave devices is possible - By expanding (16 points/device), bidirectional transmission of contact information is possible - Up to 128 points of contact transmission (with a maximum of 112 points in the reverse direction) ■ Monitoring and control possible with up to 4 SNMP managers ■ Various maintenance tasks can be performed via a web browser (including various settings, status display, contact control, log display, etc.) *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contact Information Transmission Device 'OST-716BIV' <Optical/Metal Type>

Ensures very high reliability! By expanding the slave device, transmission of up to 128 contact points is possible.

The "OST-716BIV" is a device that transmits contact information using optical fiber/metal cables as the transmission medium. It is a compact type designed for space-saving, capable of performing sampling processing compatible with digital TM input. It prevents erroneous data transmission during digit carry-over and carry-under. Additionally, this product is the successor to the "OST-716BIII" and supports mixed connections (it does not support mixed connections with the OST-716BII). 【Features】 ■ Transmission of 16 points of contact information through basic configuration (master device) ■ Expansion with slave devices allows for transmission of up to 128 points of contact ■ Compact type designed for space-saving (equivalent to the old model OST-716BIII) ■ The dimensions of the housing for both optical fiber type and metal cable type are the same (excluding protrusions) *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Are you having trouble transmitting contact information with high reliability and space-saving?

About 30 years since the initial release! Contact information transmission device using optical fiber and metal cables.

Are you having trouble with the transmission of contact information? - I want to monitor information from distant locations... - I want to freely choose the number of information to transmit... - I want to transmit information accurately... - I want to use optical fiber and metal cables... We can help solve the above issues with Oi Electric's contact information transmission device 'OST-716BIV' <Optical/Metal Type>. This device has been used by customers for over 30 years since its initial release. 【Basic Information】 - Transmission of 16 contact points - By expanding with slave devices, up to 128 contact transmissions can be achieved! - Width: 210 mm, Height: 43 mm, Depth: 250 mm ■ Being a compact type, it can be implemented in a space-saving manner. ■ By using parity and inverted transmission for error checking in the transmission format, we ensure very high reliability. *For more details, please refer to the related catalog or feel free to contact us.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Audio and contact transmission device "SPF2154"

With the addition of units, transmission is possible for up to 32 points! You can also listen to the sine wave audio source.

The "SPF2154" is an IP conversion device that uses Ethernet (IP network) as its transmission medium to transmit voice signals and contact signals bidirectionally. It encodes voice signals and contact signals, transmits them as packet data, and demodulates the received packet data on the opposite side to output voice signals and contact signals. You can select the sampling frequency and compression format for the voice, allowing you to set the transmission bandwidth and audio quality as desired. 【Features】 ■ The voice channel transmits 2 channels of input and 2 channels of output bidirectionally. ■ It can transmit 16 contact signals bidirectionally (expandable to a maximum of 32 points with unit addition). ■ You can monitor the voice signals during transmission by selecting to listen to either the transmission or reception, or both, through the monitor speaker. ■ It is possible to listen to a sine wave audio source through local operation. ■ It has parameter setting functions, recording and playback level monitoring, and network configuration capabilities. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

8K full-spec compatible wavelength multiplex transmission device

Long-distance transmission of uncompressed full-spec 8K SHV video up to 70 km with this device!

Our company offers a wavelength multiplexing transmission device that enables long-distance transmission of uncompressed full-spec 8K video over a single-mode fiber up to 70 km. This device supports bidirectional transmission and reception using DWDM (Dense Wavelength Division Multiplexing). Please feel free to contact us if you have any inquiries. 【Features】 ■ Long-distance transmission of uncompressed full-spec 8K SHV video up to 70 km with this device ■ U-SDI_DWDM optical multiplexing function ■ 10Gb E_DWDM optical multiplexing function *For more details, please download the PDF or contact us.

  • Audio and video equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Video transmission device "EZCast ProAV Series"

HDMI transmitter using wired LAN connection

The "EZCast ProAV Series" allows for simultaneous output of video and audio displayed on computers and AV devices to multiple displays using a wired network connection. (Theoretically, up to 16 transmitters and 238 receivers can be connected.) By connecting the transmitters and receivers of this series to the same network, it is possible to output video to displays installed in different rooms or floors, as well as to output different videos to each display from two or more video sources. 【Features】 ■ Simultaneous video output to multiple displays (theoretically up to 238) ■ Channel switching function included. Video transmission from multiple devices is also possible ■ Can be used as a remote KVM switch ■ Supports 4K. High-definition image quality can be output simultaneously ■ Can utilize existing network environments *For more details, please download the PDF or feel free to contact us.

  • Audio and video equipment
  • Other PCs and OA equipment
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power Line Communication Device 'BDE-1AHD'

A single coaxial cable can transmit 1 channel of video and power over long distances! Supports high resolutions of 720p and 1080p.

We would like to introduce our power-over-ethernet transmission device, the 'BDE-1AHD'. It allows for long-distance transmission of up to 800 meters with a single cable. By using this device, you won't have any trouble with the camera installation location. Additionally, it supports infrared cameras and PTZ cameras with a high output of DC12V and a maximum of 1.5A. 【Features】 ■ Long-distance transmission of up to 800 meters using 5C-FB cable ■ Supports 720p and 1080p, enabling high-resolution video transmission ■ Compatible with infrared cameras and PTZ cameras with a high output of DC12V and a maximum of 1.5A *For more details, please refer to the PDF document or feel free to contact us.

  • Company:e431
  • Price:Other
  • Audio and video equipment
  • Wiring devices
  • Security cameras and surveillance systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power Line Communication Device "BDE-IPE"

Up to 1,000m long-distance transmission is possible! Convenient for long-distance installation of outdoor access points.

The "BDE-IPE" is a transmission device that transmits Ethernet signals and power over a single coaxial cable for long distances. It supports PoE / PoE+ and can supply up to 30W of power to connected devices over a distance of 600m. It effectively utilizes existing coaxial cables when switching from analog cameras to IP cameras, making it convenient for long-distance installation of outdoor access points. 【Features】 ■ Long-distance transmission of up to 1,000m ■ Transmission speed of up to 100Mbps ■ Supports PoE / PoE+ ■ Can be installed in various locations *For more details, please refer to the PDF document or feel free to contact us.

  • Company:e431
  • Price:Other
  • Audio and video equipment
  • Wiring devices
  • Security cameras and surveillance systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4 Video + Control Signal Optical Transmission Device VAD-D403A.L1.x.235

Transmit 4 video (composite) signals and 3 control signals over a single optical fiber for long distances! An optical fiber multiplexer that can be used in a temperature range of -20 to 75°C!

VAD-D403A.L1.T.235 /R.235 transmits four channels of composite video and RS232C/RS422/RS485 over a single optical fiber for long-distance multiplex transmission. The use of optical fiber allows for long-distance transmission (up to 30 km) and is less susceptible to interference from surrounding noise sources. It enables transmission while maintaining signal quality in wiring across vast areas, long-distance wiring from remote locations, wiring in noisy factory environments, and wiring adjacent to power lines or signal lines that generate noise. Additionally, it can be used in a wide temperature range of -20 to 75°C. The optical fiber is single-mode, and the connection terminal is an ST connector. (Please consult us if a conversion connector is needed.)

  • Other security systems
  • Security cameras and surveillance systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Composite Video and Audio Transceiver Set TTP111AV-K

The TTP111AV-K transmits composite video and stereo audio (LINE) over a single LAN cable for long distances!

The TTP111AV-K transmits composite video and stereo audio (LINE) over a single LAN cable for long-distance transmission. The model TTP111AV-K is a set of two video + audio transmitters "TTP111AV," which can be easily connected at both ends of the LAN cable (RJ45) for transmission. The transmitter is a passive type and does not require a power supply.

  • Other security systems
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DVI-D Signal CAT5e Transmitter DE01ERK (No external power supply required)

A compact type DVI transmitter that can extend DVI-D signals with a single LAN cable (no external power required)! Easy wiring and connection!

DVI Signal CAT5e Transmitter Compact Type - Transmits DVI-D (single link) over a single CAT5e/6/7 cable. *CAT6 or higher cable is recommended. - Maximum transmission distance is 50m for 1920x1200 and 70m for 1024x768. *For longer distances, the DVI-D long-distance transmitter DE02E (HDCP compatible) is also available, which can transmit up to 100m. - Set includes DE01ET (PC side) and DE01ER (monitor side). - Both ends of the transmission cable use RJ45, allowing the use of commercially available LAN cables (straight wiring). - No external power supply required. *It operates on power supplied from the DVI port of the video output device, but depending on the connected device, the available power may be insufficient, resulting in a shorter transmission distance. In this case, please connect using a USB to micro USB cable (sold separately) or connect a DC5V power adapter SWP051000-1S-PSE (sold separately) or LTE10UW-S1-BS33 (sold separately) to the included micro USB conversion cable.

  • Other security systems
  • Other PCs and OA equipment
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

24-channel signal optical transmission device VAD-D0024R.L1.xx

Long-distance transmission of powered/unpowered contact signals up to the 24 system with a single optical fiber! 19-inch rack-mounted 1U size optical multiplex transmission device!

- Long-distance transmission of contact signals from 24 types of sensors and switches using a single optical fiber. - Transmission with VAD-D0024R.L1.TU (transmitter) and VAD-D0024R.L1.RU (receiver). - Capable of transmitting up to 3 km with multimode optical fiber and up to 20 km with single-mode optical fiber. - Usable in a wide temperature range of -20°C to 75°C. - 19-inch rack mount, 1U size. - Compatible with AC100 to 240V. - Blocks EMI, RFI, crosstalk, and ground loops.

  • Security guards and entrance/exit management
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DVI-D Signal CAT5e Long Distance Transmitter DE02E

The DE02E (HDCP compatible) can transmit DVI-D signals up to 100m with a single LAN cable!

The DE02E can transmit DVI-D signals over LAN cables up to 100 meters. It can connect monitors located at a distance to PCs or DVR video sources. - Transmits DVI-D (single link) signals up to 100 meters using CAT5e/6/6a/7 UTP/STP cables (CAT6 cables or higher are recommended). - Both ends of the transmission cable can use RJ45 with commercially available LAN cables (straight wiring). - Maximum resolution: 1920x1200. - Supports HDCP 1.4.

  • Other security systems
  • Other PCs and OA equipment
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PoE Plus compatible IP long-distance coaxial transmitter IPC-600P

IPC-600P allows transmission of PoE/PoE Plus Ethernet over coaxial cable up to 600m without any relay!

The IPC-600P can transmit PoE/PoE Plus Ethernet over coaxial cable up to 600 meters. Additionally, it achieves a communication speed of up to 100 Mbps in the direction from the camera to the Ethernet switch (monitor side), allowing for smooth transmission of high-resolution IP camera footage with large data volumes. Furthermore, by connecting a camera-specific switch SW105 or a DC 56V power adapter to the IPC-600P-T on the monitor side, it is also possible to supply up to 25.5W (5C-2V 100m) to the camera. This is effective for connecting IP cameras to remote locations such as outdoors or for upgrading from existing analog cameras to IP cameras.

  • Security cameras and surveillance systems
  • others
  • Other security systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HDMI CAT5e Transmitter (with Loop Output) HE03

HE03 can transmit HDMI up to 150m without relay using a LAN cable! It also features a loop output function!

The HE03 transmits HDMI signals over LAN cables (CAT5e/6/7 UTP/STP 24AWG) for long distances. The maximum supported resolution is 1080p 60Hz and 1920✕1200 60Hz. The HE03T (transmitter) can loop output the HDMI input signal, allowing for video display on a local monitor without using a splitter near the HDMI output device. Package contents: HE03T x1, HE03R x1, power adapter x2.

  • Security cameras and surveillance systems
  • Other PCs and OA equipment
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HDMI CAT5e Mini Transmitter HE01ERK

Compact HDMI transmitter (no external power required) that can extend HDMI signals over LAN cables HE01ERK!

The HE01ERK transmits HDMI signals over LAN cables up to 40 meters (1080p). It is convenient for displaying PC or DVR video on a monitor located a short distance away. - Transmits HDMI (up to 1920x1200) over a single CAT5e/6 cable (CAT6 or higher recommended). * For longer distances, the HE03 (HDCP compliant) can transmit up to 150 meters. - Both ends of the transmission cable use RJ45, and commercially available LAN cables (straight wiring) can be used. - Operates on power supplied from the HDMI port. - Not HDCP compliant. - Includes HE01SET (transmitter) and HE01SER (receiver), and a DC jack to micro USB conversion cable. * DDC communication is not supported. EDID outputs a temporary signal registered in the HE01SET. * If the input HDMI signal level is low, the transmission distance may be reduced. * The power for this device is obtained from the HDMI port of the video output device. If the supplied power is insufficient for normal operation, please provide power to the HE01SET using a USB or a separately sold DC 5V power adapter (LTE10UW-S1-BS33).

  • Other security systems
  • Other PCs and OA equipment
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4-system PoE/PoE Plus compatible Ethernet long-distance coaxial transmission device

Transmission device VDL5130 capable of long-distance transmission of up to 4 Ethernet signals (compatible with PoE/PoE Plus) over a single coaxial cable!

- In standard Ethernet, the maximum transmission distance is up to 100m, but it can be extended up to 600m (for 5C-2V or higher) without using repeaters or other devices in between. - It transmits the Ethernet and power (PoE) necessary for the installation of IP cameras using existing coaxial cables. - Up to 4 cameras (RU/R) can be connected to one network device (LU). - Using 5C-2V, it achieves a maximum bidirectional communication speed of up to 100Mbps over a distance of up to 600m. - The link cable connection terminal is equipped with a built-in TVS/GDT (surge absorber/arrestor) to protect the devices from surges.

  • Security cameras and surveillance systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

EPoC Series IP Long-Distance Coaxial Transmission Device with PoE Plus Support

Long-distance transmission of Ethernet and Power over Ethernet (PoE) up to 1,200 meters using coaxial cable! Usable in locations such as overhead wiring and underground installation!

The EPoC series is a PoE Plus compatible IP long-distance coaxial cable transmission device that can transmit Ethernet and power (PoE) over a single coaxial cable for long distances. It extends the transmission distance, which is limited to 100m with standard Ethernet, up to 1,200m (using 5C-2V or higher) without the need for repeaters or other devices in between. We offer indoor models as well as outdoor transmission devices that are waterproof and equipped with lightning protection. 【Features】 ■ Achieves long-distance Ethernet transmission at a lower cost than fiber optics ■ A rich lineup allows for flexible and free system construction ■ Supports the introduction of new systems while utilizing existing wiring and equipment *For more details, please refer to the PDF materials or feel free to contact us.

  • Security cameras and surveillance systems
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2 Video Multiplexer JCP-101HD

JCP-101HD, which multiplexes 2-channel analog HD video and composite video for transmission over a single coaxial cable!

The JCP-101HD is a transmitter that multiplexes 2-channel AHD/HD-TVI/HDCVI/composite video signals (which can be mixed) and transmits them over a single coaxial cable. One of the two channels is transmitted in baseband, while the other channel is transmitted via RF modulation. It is effective for updating or adding cameras using existing cameras and coaxial cables.

  • Security cameras and surveillance systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LAN Cable IP Long-Distance Transmitter IP09K

The IP09K allows for long-distance transmission of up to 800 meters with a single LAN cable (without a relay)!

The IP09K is a product that enables long-distance Ethernet transmission with a single LAN cable. The IP09K is a set of two units of the IP09, which functions as both a transmitter and a receiver. It is primarily used for one-to-one connections, but it can also be used as a repeater, allowing for distance extension with each additional unit (individual sales of the IP09 are also available). - For one-to-one connections, it can extend up to 500m at 100Mbps and up to 800m at 10Mbps. - It supports low power consumption with EEE. - It has a built-in surge protector (with a withstand voltage of 1.5kV).

  • others
  • Other PCs and OA equipment
  • Other security systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

VGA, USB, audio, RS232C CAT5e transmitter VKM04

KVM transmitter VKM04 that transmits VGA, USB, audio, remote control IR signals, and RS232C over a single LAN cable up to 140m!

This is a transmitter that extends VGA (analog RGB), USB 2.0, audio, infrared remote control signals, and RS232C up to 140 meters using CAT5e or CAT6 LAN cables (UTP/STP 24AWG solid wire). The transmitter allows for loop output of the VGA signal, enabling video confirmation near the VGA output device.

  • Other commercial buildings and service facilities
  • Other PCs and OA equipment
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-channel audio optical fiber transmission device VAD-PA020C.xx

Optical transmission device VAD-PA020C.xx capable of transmitting audio signals from 2 systems over a single optical fiber up to 20 km!

The VAD-PA020C transmits two channels of audio signals over single-mode fiber optic cable up to 20 km and over multi-mode fiber optic cable up to 3 km. Audio can be transmitted in high quality due to digital conversion.

  • Other security systems
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analog stereo audio CAT5e transmitter AE02

AE02 that transmits analog stereo audio up to 600m using a LAN cable!

AE02 is an audio transmitter that transmits analog stereo audio signals up to 600 meters using LAN cables (CAT5e/6). The LAN cable can be easily connected with an RJ45 connector. It can be used as both a transmitter and receiver, allowing each channel of stereo audio to be used separately, as well as for bidirectional transmission of mono audio. No external power supply is required. It comes as a set of two units, one for transmission and one for reception.

  • Other PCs and OA equipment
  • Other commercial buildings and service facilities
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analog HD video compatible 4 video + control + contact signal optical fiber transmission device

VAD-H404A.xx.355R, which transmits 4-channel analog HD video and RS232C + RS485 x 2, contact signals up to 20 km via optical transmission!

The VAD-H404A.xx.355R transmits four channels of AHD/HD-TVI/HDCVI/composite video signals, RS232C + RS485 x 2 control (serial) signals, and one channel of contact signals over a single optical fiber for long-distance transmission up to 20 km. The video is transmitted in a digital format, ensuring no degradation in image quality.

  • Security cameras and surveillance systems
  • Other security systems
  • others
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4-channel optical fiber transmission device VAD-i400.xx

VAD-i400.xx for long-distance multiplex transmission of 4-channel composite video over a single optical fiber!

The VAD-i400.xx transmits four channels of composite video signals over single-mode fiber up to 20 km and multi-mode fiber up to 3 km. Since the video is digitally converted for transmission, there is no degradation in image quality.

  • Security cameras and surveillance systems
  • others
  • Other security systems
  • Transmitters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration