Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.
571～600 item / All 1250 items
操作が簡単・圧力調整不要
本装置は各種ケーブル接続点（＝クロージャ）へのガス（＝除湿空気）封入を目的としており、 クロージャの気密チェック（＝ガスフラッシュテスト）に使用するものです。 クロージャに本装置を接続し（注）、規定圧のガスをクロージャ内に封入することが出来ます。 （注：5号および６号ガスバルブは別売りの変換接手が必要です） 本装置は安全弁を搭載しており、規定封⼊圧⼒以上になると⼤気放出されるため、圧⼒調整が 不要です。よって、接続後に電源スイッチを押すだけの簡易操作で作業を⾏うことが出来ます（※）。 （※レギュレータや圧⼒計は備わっていませんが、封⼊圧⼒値の記録等が必要な場合は別売りの 増設圧⼒計を取り付けることで圧⼒を測定出来ます） ⼤容量のクロージャにガスを封⼊する際は、別売りの「増設コンプレッサー」を併⽤することで 作業時間の短縮が可能になります。
Improvement of safety! By spreading aggregates, slip resistance is enhanced.
The "BK Grip-K (KC-G Method)" is a formwork-type color grip method that is suitable for barrier-free design, as it does not create any steps due to its thin layer. By using formwork with tile-like or patterned designs, resin is applied to typical asphalt or concrete pavement surfaces, and aggregates are scattered to create a comfortable urban space. Since it uses a fast-curing resin, construction can be completed in a short time, allowing for early opening. 【Features】 ■ Improved safety ■ No steps ■ Mitigation of the heat island effect ■ Short construction time and early opening ■ Enhanced durability of the pavement *For more details, please refer to the PDF materials or feel free to contact us.
Measure the mass of the sample taken from the original position! Determine the mass of the sand and water separately, and calculate the density of the sand.
The "Field Density Test" is a test conducted to determine the density of materials such as fill in their natural state, and it is widely performed, particularly for construction types that require compaction management. As information-based construction using TS and GNSS is implemented, there is an increasing number of tests conducted on test fills aimed at determining factors such as the number of compactions, further expanding the scope of its application. Please feel free to consult us when needed. 【Overview】 ■Field: Excavation of test holes, sand injection for testing ■Laboratory: Weighing of residual sand, weighing of excavated soil (moist), weighing of excavated soil (dry) ■Calibration: Measuring the mass of the measuring device, measuring the mass of the measuring device and sand, measuring the mass of the measuring device and water *For more details, please refer to the PDF document or feel free to contact us.
Application to experiments such as horizontal and vertical direction vibrations, and cable vibrations of a cable-stayed bridge!
We would like to introduce the "E-0.5KN Vibration Generator" that we handle. It uses a method where the weight is moved by the rotation of a pole screw, and since the weight is directly connected to the motor, no noise is generated. Additionally, because it is a method of attaching weights, the main unit is lightweight (33kg), and it features a simple mechanism with fewer breakdowns. 【Features】 ■ Method of moving the weight by the rotation of the pole screw ■ No noise generated as the weight is directly connected to the motor ■ Lightweight main unit (33kg) due to the weight attachment method ■ Simple mechanism with fewer breakdowns ■ Can use AC100V power supply *For more details, please download the PDF or feel free to contact us.
Joint development with the Tokyo Metropolitan Government Civil Engineering Technical Support and Human Resource Development Center! It is possible to grasp deflection, natural frequency, and damping constant.
We would like to introduce the "RC Slab Impact Vibration Test." This device is a specialized instrument developed in collaboration with the Tokyo Metropolitan Civil Engineering Technical Support and Human Resource Development Center to investigate the damage level of bridge RC slabs. This survey involves dropping a weight onto the center of the slab, and by measuring the free decay vibrations of the slab generated by the impact, it is possible to grasp the deflection, natural frequency, and damping constant. 【Features】 ■ Jointly developed with the Tokyo Metropolitan Civil Engineering Technical Support and Human Resource Development Center ■ Capable of measuring deflection, natural frequency, and damping constant *For more details, please download the PDF or feel free to contact us.
Widely compatible with major environmental testing standards worldwide! Please choose from a wide range of products.
"ClimeEvent" is a testing device that achieves industry-leading rapid temperature changes of 25°C/min over a wide range of temperature and humidity. It uses R449A as the refrigerant, which has a global warming potential (GWP) that is about one-third that of the conventional R-404A. Depending on the testing purpose and sample size, you can choose from a rich lineup of devices with capacities ranging from 270 liters to 1300 liters. 【Features】 ■ Rapid temperature changes compliant with IEC 60068-3-5 standards ■ Operates over a wide temperature range from -72°C to +180°C ■ Supports allowable heat loads up to 8kW over a broad temperature range of -20°C to +100°C ■ High maintainability ensured with easy wick replacement *For more details, please refer to the PDF materials or feel free to contact us.
Passion for innovation! We are a long-established German environmental testing manufacturer that has grown into a global company with 40 locations and over 2,200 employees.
Weiss Technik is a member of the Schunk Group and is the second largest division among the group's four divisions. We provide solutions for customers to develop higher performance, robust, and safer products and to realize their technical visions. As "engineers for engineers," we are passionate about developing unique high-tech solutions. As a member of the Schunk Group, we have a solid financial foundation, a long-term commitment, and access to the global market. 【Business Activities】 ■ Solution Development ■ Environmental Testing Equipment *For more details, please refer to the PDF document or feel free to contact us.
This is a temperature testing device that achieves good temperature stability and temperature distribution, offering excellent cost performance.
The "TempEvent" is a constant temperature testing device that allows for program settings, control, and monitoring anytime and anywhere, thanks to the adoption of "WEBSeason." The adoption of promising new refrigerants and optimized air conditioning design in the industrial sector achieves the highest level of eco-friendly operation. It is compatible with tablet and smartphone environments, enabling the establishment of a more efficient and convenient testing environment. 【Features】 ■ Low GWP refrigerants R-449A and R-469A ■ Optimized airflow, temperature change capability, and uniform temperature distribution ■ Interface compatible with WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.
We test the service life of products against environmental factors such as sunlight, temperature, and humidity. By maintaining products for a longer time and in better condition, we contribute to a sustainable society!
Our company handles the integrated solar radiation device, the constant temperature and humidity testing chamber 'SunEvent'. Products are exposed daily to direct sunlight from the sun, high temperatures, low temperatures, and humidity, regardless of their intensity, which can cause the paint to peel and lead to the end of their lifespan in a different sense than their intended service life. This product complies with the DIN 75220 and IEC 60904-9:2007 standards and tests the service life of products under sunlight, temperature, and humidity. 【Features】 ■ Excellent illuminance distribution solar radiation device BBA Sun Simulator compliant with IEC 60904-9:2007 ■ Compliant with DIN 75220 ■ Low GWP refrigerant R-449A ■ Interface compatible with WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.
It is an energy-saving, compact, and cost-effective environmental testing constant temperature (constant humidity) testing device.
The "LabEvent" is a constant temperature (constant humidity) testing device that uses the low GWP refrigerant R-449A. We offer a wide range of options including rack stacking, monitor arms, packages compliant with EUCAR hazard levels 3 and 4, and safety features for LiB testing. It is energy-efficient, compact, and offers excellent cost performance, compatible with the WEBSeason internet environment. 【Features】 ■ Compact design, space-saving ■ Numerous option settings ■ Low GWP refrigerant R-449A ■ Interface compatible with the WEBSeason internet environment *For more details, please refer to the PDF materials or feel free to contact us.
It is possible to test the product's resistance to harmful substances! It is ideal for environmental tests such as H2S, SO2, Cl2, and NO2 synthetic gas.
The "AirEvent" is a gas corrosion testing device that can mix up to four types of gases. It can test the resistance of products to harmful substances and collect information regarding the service life of the products. It supports H2S, SO2, Cl2, transport gases such as N2, NO2, synthetic air, and other gases. Please feel free to contact us when you need assistance. 【Features】 ■ Testing of gases such as H2S, SO2, Cl2, N2, NO2 synthetic gas ■ Ability to mix up to four types of gases ■ Pressure monitoring protection ■ Gas sampling connection ■ Air conversion device testing *For more details, please refer to the PDF document or feel free to contact us.
For appealing the effects of vibration damping dampers! Can also be used as a vibration testing machine.
"Yure MAX" is a small vibration device that operates solely on AC 100V power. It is suitable for appealing the effects of vibration dampers and for use at events by builders. 【Features】 ■ Low price ■ Operates only on AC 100V power ■ Specializes in low speeds from 1Hz to 5Hz ■ Can also be used as a vibration testing machine *For more details, please download the PDF or feel free to contact us.
Complete non-destructive testing without leaving any measurement marks is possible!
"W.A.P.P" is a double-chamber pressure permeation and air permeability testing device that enables the testing of permeability coefficients at concrete construction sites. Additionally, the surface permeability coefficient P (P value), which can be measured at concrete construction sites, is closely related to deterioration involving water, allowing for non-destructive testing of properties such as water tightness, durability (salt damage, carbonation, abrasion, fatigue, cracking, freeze damage, alkali-silica reaction), etc. 【Features】 ■ Enables permeability coefficient testing at concrete construction sites ■ Allows for testing of water tightness and water resistance (water-cement ratio) from the permeability coefficient ■ Enables pressure testing of water tightness (permeability) and air tightness (air permeability) at the same location ■ Achieves complete non-destructive testing by using special sealing materials ■ Allows for non-destructive testing on any surface of the structure, including the top, sides, and bottom *For more details, please download the PDF or feel free to contact us.
Easy to install, won't shift, won't fall! Corner installation can be easily done with a cut on one wing.
The "GW Grip" is a product that can securely hold glass wool in place. It allows for inspection of the installation status of soundproofing materials (glass wool) for PS soundproof walls before board installation. Additionally, it enables standardization of the prevention of glass wool falling behind unit baths, which has previously been left to the site. Furthermore, it can be installed without making contact with existing walls or concealed walls, ensuring an air layer is maintained, even in cases of furred walls or double walls. 【Features】 ■ Securely holds glass wool ■ Easy installation for anyone ■ Compatible with thicknesses from 40mm to 120mm ■ Allows for easy corner installation with a cut (slit) on one side ■ Custom dimensions available upon request *For more details, please refer to the PDF materials or feel free to contact us.
Would you like to shorten the development research time with a high-precision "resonance-type" fatigue testing machine?
SincoTec's fatigue testing machines can conduct high-precision tests with high test loads and high test frequencies for compression/tension, torsion, bending, rotation, and internal pressure testing. Particularly notable is the "resonance-type" fatigue testing machine, which is a top manufacturer in the world and offers a testing machine that is efficient in time, energy-saving, and highly accurate. The advantages of the resonance type are as follows: 1. Resonance type: Motor-driven (MOT) type, electromagnetic-driven (MAG) type / dynamic and static testing * The MOT method is unique to SincoTec in the world and is patented. 2. High precision detection of micro-cracks as small as 10μm due to proprietary control software. 3. High test loads (1 to 2000 kN) and high test frequencies (standard 300 Hz, maximum 1100 Hz). 4. Compared to hydraulic systems, testing time is reduced by up to 1/10 and testing costs by up to 1/20. 5. Simple structure with low maintenance. No worries about oil leaks since there is no hydraulic mechanism. No need to regularly replace consumables such as hydraulic oil and oil filters. 6. Over 4,000 units sold worldwide based on 30 years of experience. 7. Custom-made machines can be produced according to customer requests. Hydraulic, electric, and compression testing machines are also available.
The control system is "Test Pilot"! A lineup of 5 electric servo and hydraulic servo testing machines.
We would like to introduce our electric servo/hydraulic servo testing machines, 'POWER FLOW/POWER DRIVE'. In particular, we offer products such as the "POWER DRIVE direct-drive specification" for micro movements, the one-axis "POWER DRIVE" with a direct drive spindle actuator, and the flexible mechanism "POWER DRIVE multi axial". Additionally, we also have the "POWER FLOW Biaxial" with an axial load of 125 kN available. 【Product Lineup】 ■ POWER DRIVE direct-drive specification ■ POWER DRIVE ■ POWER DRIVE multi axial ■ POWER DRIVE torsion ■ POWER FLOW Biaxial *For more details, please refer to the PDF document or feel free to contact us.
![[Example of Achievements] Fatigue Testing Machine (Electric/Hydraulic Servo Type)](https://image.www.ipros.com/public/product/image/7b7/2000647846/IPROS02419542596812714572.png?w=280&h=280)
Would you like to shorten development time with a high-precision "resonance-type" fatigue testing machine? We introduce a variety of products from SincoTec.
We would like to introduce examples of achievements using the electric and hydraulic servo fatigue testing machines manufactured by SincoTec. Starting with the "2-axis steering column testing machine" capable of dual rotary drive, we also have numerous achievements including the "3-axis testing machine for composite leaf springs" with flexible adjustments, as well as the "4-point rotational bending testing machine" and "stabilizer testing machine/spring testing machine." In the PDF document below, we also introduce a wide range of other products, so please take a look. 【Examples of Achievements (Partial)】 ■ 2-axis testing machine ■ 3-axis testing machine ■ 4-point rotational bending testing machine ■ Multi-axis hydraulic testing machine *For more details, please refer to the PDF document or feel free to contact us.
Wouldn't you like to make the most of your product as quickly, accurately, and cheaply as possible?
Sinco Tec is a manufacturer of testing machines for parts and materials for the automotive, railway, wind power, and aerospace industries. "SincoTec Test Systems" develops and sells standard testing machines such as resonance, hydraulic servo, electric servo, and compression servo, as well as custom testing machines for various industrial sectors including automotive, railway, wind, and medical fields. In addition to the resonance testing machine "POWER SWING" series, we offer a wide range of customized testing machines and load frames with different drive systems. 【Business Description】 ■ Development and sales of standard testing machines such as resonance, hydraulic servo, electric servo, and compression servo, as well as custom testing machines. *For more details, please refer to the PDF document or feel free to contact us.
I will explain a testing system that can set axial loads, torsional loads, and bending loads.
The compression servo testing system generates test loads using a return compression cylinder. Many companies already have pneumatic systems in-house, making it easy and cost-effective to set up with this compression drive. SincoTec's compression unit, which includes all necessary components, is a very compact system that also contains proportional flow direction control valves and safety valves, in addition to the compression cylinder and load/displacement sensors. 【Features】 ■ Multi-axis testing capability ■ Large displacement amplitude ■ High reliability ■ Low investment cost ■ Simple system *For more details, please refer to the PDF materials or feel free to contact us.
I will explain the hydraulic testing system capable of simulation tests and multi-axis tests.
The hydraulic servo testing system is a load-driven testing system that applies load to the test specimen using a hydraulic servo testing cylinder. It can apply load in a uniaxial or multiaxial manner, and like for internal pressure, it is possible to set axial, torsional, and bending loads. It is extremely suitable for single-stage testing, similar to dynamic simulation testing, and in addition, these testing systems are also suitable for softer, elastic components, as well as multiaxial and phase-synchronized tests. 【Characteristics】 ■ High load capacity ■ Multiaxial testing capability ■ Freely configurable load profiles ■ Simulation testing ■ Wide range of displacement amplitudes ■ Load and displacement control *For more details, please refer to the PDF document or feel free to contact us.
Accurate displacement control! An explanation of testing systems suitable for iron and non-ferrous components with average loads.
The electric servo-type testing machine is controlled by a system of linear motion generated by a servo motor through spindle drive or electric servo method. The torque generated is recorded using additional linear guides by converting motor rotation to spindle drive. Additionally, the servo drive is controlled by the "TestPilot" controller, which displaces the test frequency using a test frequency range of 0.001 to 50 Hz to control or activate the operating load. 【Features】 ■ Simple quality tool ■ Multi-axis testing capability ■ High mechanical rigidity ■ Average load ■ Accurate displacement control ■ Only requires power connection *For more details, please refer to the PDF document or feel free to contact us.
Static and dynamic testing is possible! It is far more energy-efficient than hydraulic methods and can test internal pressure resistance in a short time.
The "POWER SWING MOT Internal Pressure" is an internal pressure load fatigue testing machine with a maximum pressure of 3000 bar (300 MPa). The rated load is 100 kN and 400 kN, with a maximum testing frequency of 40 Hz. We use our self-developed control software "EMOTION." Additionally, it is possible to add environmental condition operation simulations such as vibration excitation and temperature environments. 【Advantages】 ■ Capable of manufacturing internal pressure load testing machines up to 4000 bar (400 MPa) ■ Significantly more energy-efficient than hydraulic systems - Energy consumption: 4 kW for high-frequency loads (depending on testing conditions, etc.) ■ Internal pressure resistance can be tested in the shortest time possible ■ Environmental condition operation simulations can be added (vibration excitation, temperature environments, etc.) *For more details, please refer to the PDF materials or feel free to contact us.
Patent held! Suitable for material and component testing, especially tests requiring clearance.
The "POWER SWING MOT (Motor Driven) Series" is a resonance-type fatigue testing machine for materials and components with test loads ranging from 1 to 2000 kN. The test frequency ranges from 30 to 120 Hz, with a maximum amplitude of 12 mm. It is particularly suitable for material and component testing, especially for tests that require clearance. It is also suitable for low cycle fatigue (LCF) testing. 【Mechanism of the MOT (Motor Driven) System】 ■ Operates at frequencies below the resonance peak ■ Changes primary excitation based on the square of the drive speed ■ Varies the excitation frequency to change the amplitude ■ Uses the excitation frequency to modify the output amplitude *For more details, please refer to the PDF document or feel free to contact us.
Energy-saving with fast testing! Real load control of maximum distortion amplitude is possible.
The "POWER ROTATING BENDING" is a rotating bending testing machine with a bending moment range of 2,000 to 350,000 Nm. The testing frequency is 10 to 80 Hz. It uses our self-developed control software "EMOTION." Additionally, with the built-in calibration device, static-dynamic comparative measurements can be easily performed. 【Advantages】 ■ Energy-efficient and fast testing ■ Visualization of technical cracks ■ Real load control of maximum strain amplitude ■ Easy static-dynamic comparative measurements with the built-in calibration device ■ Testing according to DIN EN 13260, 13261, 13262 (for railway use) *For more details, please refer to the PDF document or feel free to contact us.
A variety of wavelengths are lined up to match the fiber optic line being measured!
The "Access Master MT9085 Series" is a portable measuring device that integrates optical pulse testing, optical loss testing, optical power measurement, and optical fiber end-face inspection into one unit. With a large 8-inch LCD touch panel screen that enhances functionality from previous models, and the fusion of hard keys and a rotary knob, it achieves intuitive and comfortable operability. The operation of the Fiber Visualizer, which allows for quick pass/fail confirmation of optical fiber line evaluations, has become even more user-friendly. 【Features】 ■ Wide touch screen (8 inches) ■ Easy analysis ■ Hard keys ■ High-precision event detection and loss measurement ■ Up to 1×128 branching *For more details, please refer to the PDF document or feel free to contact us.
Design and development product for the automotive industry. Dimensions: 9m × 3.5m × 1m. Weight: approximately 30t.
This device is a durability testing machine for automotive transmissions. It conducts durability tests on the transmission unit of a vehicle, simulating engine output and tire-side output according to driving conditions. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.
Design and development product: Vehicle-related testing machine. Dimensions: 1.5m × 6m. Weight: Approximately 8t.
This device is the inertial force rotating body component of a disc brake testing machine for wheels. The rotating body component is adjusted to a balance accuracy of within G2.5, and the device allows for the rearrangement of inertial forces for brake testing through combinations. In addition to the above, our company has been involved in the manufacturing and assembly of various products based on customer specifications. For other examples, please refer to the PDF materials or feel free to contact us.
Wide coverage including outdoor constant temperature tanks, air filter cutting machines, testing machines, etc. Total support from design to manufacturing, installation, and regular inspections is available.
Our company is engaged in "contract development of industrial equipment and more" utilizing the technical know-how and large assembly facilities cultivated through the manufacturing of marine diesel engines. We have established a system that covers everything from design to production, assembly, installation, and maintenance inspections. We possess machine tools and equipment, including large five-sided machining centers, capable of machining castings, fabricated products, and forged items. Currently, we are offering materials that introduce various achievements we have accomplished so far. You can view them via "PDF Download." [Contents (excerpt)] ■ Radio heliograph antenna ■ Outdoor constant temperature chamber ■ Air filter cutting machine ■ Aircraft engine test cell large door ■ Railway vehicle brake testing machine ■ Polarimeter antenna (for solar observation) ■ Base plates for factory equipment ■ Transmission testing device ■ Interferometer antenna system ■ CT for the head *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Site-cast pile drilling technology that enables construction in narrow spaces.
Our company handles a construction method using a super low-headroom bored pile drilling machine for installing cast-in-place piles in very narrow construction areas. We have adopted a turntable drive system for the drilling rod, achieving a total machine height of 1.8m in combination with a dedicated special Kelly rod (L=1m). Excavation work can be performed with a headroom of 2m. Additionally, we have equipped the machine with a drilling management system that visualizes and records construction information, allowing for feedback in construction management. 【Features】 ■ Lightweight and compact ■ High construction capability ■ Systematized drilling management *For more details, please download the PDF or contact us.
A soundproof device has been created that takes into consideration noise for neighboring residences and physical strain for workers!
The "TMN-301" is a fully automatic asphalt compaction device that can automatically compact the front and back of Marshall specimens simply by placing and setting the sample in the mold. After setting the mold with the sample, pressing the start switch causes the rammer to rise to a specified height through the up-and-down motion of the air cylinder and then automatically drop. Additionally, because it is automated, no operation is required after setting the mold. This minimizes density errors by the specimen creator. 【Features】 - Contributes to labor saving by performing a series of operations automatically - Allows for arbitrary settings of the number of surface and back compactions - Meets the standards of ASTM D-1559 and JHS-202 - Effective in improving the working environment, including noise reduction and safety - Sensor functions can be checked on the display panel, etc. *For more details, please download the PDF or feel free to contact us.
