Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
271～300 item / All 1221 items
This is an S-type friction testing machine compliant with JIS standards.
It is a friction testing machine used to evaluate color transfer due to friction from printing inks and the fuzzing of paper.
The evaluation is based on the wear reduction of the rubber test piece pressed against the surface of the abrasive paper wrapped around the circumference of the rotating drum.
-
It is used to indicate the Rockwell hardness of materials such as plastic, measured by pressing a steel ball against the surface.
○Reference Standards: JIS B 7726, B7730, K 7202-2, Z2245, ASTM E18, D 785, ISO 6508-1, -2, -3, ISO 2039-2 ○Power Supply: AC100V, single phase, 2A (domestic), AC200-240V, single phase (overseas), 50/60Hz (selectable) ○Dimensions and Weight: W196×D487×H820mm, approximately 82kg ●For other functions and features, please refer to the catalog or contact us.
It is a testing machine that evaluates the hardness of a coating by pressing a pencil of known hardness against the coating film using the pencil hardness method.
Type NP is also compatible with the Clemens scratch hardness test for decorative boards.
Compact tabletop demarcation bending test machine
● It is a compact and space-saving tabletop model. ● It can test 12 specimens simultaneously. ● Consideration has been given to safety and noise reduction.
This is a testing machine for evaluating the creep properties of plastics.
●No weight replacement operation is required, and the load setting can be easily done by moving the weights on the lever using motor drive. ●The distance between the load lever and the lever cushioning base is automatically controlled, minimizing the load impact during specimen fracture.
This is a testing machine that reproduces the state in which thin paper, fibers, and films bend under their own weight to calculate the Clark's breakage (stiffness).
It reproduces the state when paper and fiber products bend under their own weight, automatically adjusts the protrusion length of the test specimen, and measures the critical length and stiffness.
It is a testing machine that evaluates the stiffness of ultra-thin materials such as films, measuring the resistance to collapse in a loop shape.
You can evaluate the strength of ultra-thin materials such as films.
This is a testing machine that evaluates the tear strength of materials such as plastic film, paper, and textiles using the Elmendorf method.
<Reference Standards> Paper: JIS P 8116 Plastic: JIS K 7128-2, ISO 6383-2 Fiber: JIS L 1096 (Please specify as the dimensions of the clamp will change)
The tear strength of materials such as paper, film, and fabric is measured by the loss of potential energy of a pendulum in the shape of a fan, and the calculation results are displayed digitally.
<Reference Standards> Paper: JIS P 8116 Plastic: JIS K 7128-2, ISO 6383-2 Textiles: JIS L 1096 (Please specify as the dimensions of the clamp will change)
It is used for heating deformation tests of electric wires and can test three samples simultaneously.
-
In a testing machine that conducts aging tests of rubber materials in an ozone atmosphere, ultraviolet absorption method is used for concentration control.
-
This is a testing machine for determining the thermal aging characteristics of vulcanized rubber and thermoplastic rubber.
To eliminate the effects of additive migration, aging tests will be conducted by heating within a glass tube.
It is a Gurley-type permeability tester used for measuring the permeability (air permeability) of materials such as paper.
This is a permeability testing machine (Gareden Someter) that automatically detects the drop speed of the pressurized cylinder and displays the time it takes for 100cc to pass (air permeability resistance) and the ISO permeability.
This is a testing machine for evaluating the air permeability of materials such as fabrics, non-woven fabrics, and filter paper.
The air flow rate is determined when a certain suction pressure (differential pressure) is applied to the test specimen, and the air permeability is calculated per unit time and per unit area to evaluate the air permeability characteristics of the material.
The drying level is evaluated by measuring the time until the surface of the printed ink no longer adheres.
-
It is a batch-type film biaxial stretching device. It can experimentally evaluate and determine the processing suitability conditions and product value of the stretched film.
The demand for high value-added plastic film has been increasing in recent years, leading to a need for further improvements in the accuracy and functionality of testing machines. This biaxial stretching testing device adopts a servo-driven system to enhance stretching speed and diversify stretching modes, allowing tests under various conditions for biaxially stretched films, thus obtaining appropriate processing conditions for samples. - The stretching method employs a center stretch type, and the drive system uses a servo motor, enabling high-precision stretching that results in uniform films. - Various stretching processes can be performed by setting the stretching program according to different conditions. - Sample attachment can be done safely and quickly using a gas pressure grip. - Customization is possible to meet customer needs, including stretching ratio, load detection, secondary heating devices, and data processing. ● Sample testing is available at our factory in Itabashi, Tokyo, so please feel free to contact us.
Tabletop mixing and extrusion molding evaluation test device. It allows for processing performance evaluation with very small sample sizes using a super compact mixer and extruder.
The "Laboplast Mill Micro" is a tabletop experimental device used for evaluating the kneadability and extrusion characteristics of samples that can only be obtained in small quantities, such as ultra-small volume samples synthesized at the laboratory level, nanoparticles (carbon nanotubes, silica, titanium oxide, etc.), and next-generation composite materials in research and application. ■ Sample testing is available at our factory (Kita-ku, Tokyo), so please feel free to contact us.
A simple manual injection molding machine for producing test specimens. It can also be used as a pelletizer to pelletize amorphous samples mixed in a mixer.
●It can be used as a simple manual injection molding machine to shape dumbbell-shaped or strip-shaped test specimens. ●By replacing the inner cylinder, it can also be used as a pelletizer to directly feed amorphous samples obtained by mixing (cylinder diameter ∅20mm) and pelletize them.
It is a device for applying paint and ink uniformly to form a coating.
Since it can be applied at a constant speed, it can create a coating film with a uniform thickness without causing uneven application.
It is useful for managing the flow properties of inks and adhesives, and measures the spreading rate of a sample between two parallel plates.
○Capacity: 0.5ml ○Plate weight: 115g (acrylic plate) ○Reference standards: JIS K 5101, K 5701 *Option: Load plate (glass plate)
Compliant with JIS K6255 (2013)! There is a correlation with the Lupke method and the data. Fully automatic measurement of rubber rebound elasticity for up to 20 samples.
Compliant with JIS K6255 (2013)! There is a correlation with the Lyupke method and the data. Fully automatic measurement of the rebound elasticity of rubber for up to 20 samples. ○ Hammer: Diameter Φ12.5±0.05mm ○ Impact speed: 1.88±0.02m/s ○ Release method: Opening by cutting off the current of the electromagnet ○ Supply device: Revolver type with 20 units ○ Test specimen: Φ29.0±0.5mm, thickness 12.5±0.5mm ○ Holding force: 200±20N ○ Air pressure: 0.4MPa or more ○ Operating environment: 5~35℃, 35~85% RH, no condensation ○ Body dimensions: Approximately W550×D700×H880mm ○ Weight: Approximately 100kg ○ Power supply: AC100V, single-phase, 50/60Hz, 2A *Optional Origin block, model SBA-GB (used when setting the origin of the hammer) ○ Reference standards: JIS K6255 (2013), ISO 4662:2017 *For more details, please contact us or refer to the catalog.
This is a compact tabletop test press machine for laboratory use. It can be used for pressing plastic sheets for compression molding and for vulcanizing rubber sheets, among other applications.
- It is a compact tabletop type, so it can be easily used anywhere. - The pressure plate can be moved and finely adjusted with just the pump's pressurization operation. (Automatic switching, two-speed type) - It has a fast heating rate and excellent temperature distribution. - It is equipped with an overheat prevention circuit. - It satisfies the functions of two units (heating and cooling) with one device. (Model with water cooling plate) - Air cooling unit [Model AIR-C] (Option for water-cooled plate specification, increases cooling efficiency by flowing air through the water cooling pipe, includes a check valve to prevent backflow of cooling water, manual operation for opening and closing the air and cooling water valves) - Other options: Safety cover [Model SC], interlock safety cover [Model ISC], temperature controller [Model T-CONT] (programmed heating, maximum heating capacity of 12°C/min, maximum number of heating steps 16), thermal plate parallel assistance mechanism [Model PARA], over-temperature prevention unit [Model TEMPG]
This is a testing machine used to evaluate the color fastness to rubbing of dyed fabrics and similar materials.
We evaluate color transfer caused by friction from dyed fabrics and other materials.
The high-temperature HDT testing device is a load deflection temperature testing machine that supports tests exceeding 300°C.
By controlling the arrangement of the test specimens and the airflow within the chamber, we significantly improve the temperature distribution.
This is an analog type Mullen burst testing machine (Mullen type burst strength testing machine).
The Mullen burst tester, used to evaluate the burst strength of materials such as paper and textiles, comes in low-pressure and high-pressure types. The E type is a conventional analog type. The low-pressure type is used for tests up to 2500 kPa, while the high-pressure type is used for tests exceeding that pressure.
This is a testing machine for measuring the tear strength of a single specimen made of materials with low tear strength, such as film.
● It is suitable for materials with low tear strength that cannot be handled by the Elmendorf tear testing machine. ● The tear strength is displayed in a line graph. ● The average, maximum, minimum, and standard deviation of the measurement data are displayed. ● One calibration weight is included for each measurement range.
This is a low-temperature impact brittleness testing device (brittleness temperature testing device) used for low-temperature characteristic testing of rubber and plastics (cold resistance testing).
Rubber and plastic are immersed in a low-temperature liquid, struck with a hammer at a constant speed, and evaluated based on the occurrence of cracks. You can choose between the dry ice method or the refrigeration method.
The Charpy impact testing machine with a low-temperature chamber has automated specimen transport.
●Temperature setting range: -40℃ to 40℃ ●The main switch of the impact testing machine automatically sets the test specimen on the sample stage and conducts the test. ●Up to 15 test specimens can be stored. ●By automating the test specimen setup, the accuracy of the specimen setup and the setup time (within 5 seconds) are standardized, eliminating human error.
This is a system that attaches a load cell to the hammer impact blade (Charpy impact test) and the specimen support platform (tensile impact test) to measure the shock waveform.
● The impact force applied to the sample can be measured using a load converter. ● Changes in impact force over time can be measured.
